更新日： 集計期間:May 27, 2026～Jun 23, 2026
※当サイトの各ページの閲覧回数を元に算出したランキングです。
更新日： 集計期間:May 27, 2026～Jun 23, 2026
※当サイトの各ページの閲覧回数を元に算出したランキングです。
更新日： 集計期間:May 27, 2026～Jun 23, 2026
※当サイトの各ページの閲覧回数を元に算出したランキングです。
361～390 件を表示 ／ 全 1379 件
Sony's D V Walkman and Handycam can be powered by a 12V supply from professional cameras, reducing the need for battery changes.
Models that use L-type batteries can be attached to the battery mounting section, while models that use M-type batteries can be connected with an optional cable.
By using the included configuration software, you can easily make detailed settings regarding incoming and outgoing calls!
The "PRI/BRI Switcher" distributes one PRI line into multiple BRI lines, accommodating the T point after the DSU and converting it to the S/T point of the BRI lines. Additionally, by using the included configuration software, detailed settings related to outgoing and incoming calls can be easily configured for each accommodated line, such as group settings for outgoing and incoming calls and designating incoming groups corresponding to dial-in phone numbers. It is useful for consolidating many ISDN64 lines into a single ISDN1500 line, as well as for interface matching at the POI and in the development of PRI and BRI related equipment. 【Features】 ■ Distributes one PRI line into multiple BRI lines ■ Three types available for different applications ■ Useful for interface matching at the POI and in the development of PRI and BRI related equipment *For more details, please refer to the PDF document or feel free to contact us.
A converter that has the function of outputting the signal input to the T1/E1 port to each of the 16 CII ports.
The "CII-T1/E1 Converter" is a device that has the function of outputting signals input to the TS of T1/E1 ports to 16 CII ports, respectively. It is also compatible with TTC-2M. The clock source can be selected from DCS/LINE/INT. 【Features】 ■ Has the function of outputting signals input to the TS of T1/E1 ports to 16 CII ports, respectively ■ Compatible with TTC-2M ■ Clock source can be selected from DCS/LINE/INT *For more details, please refer to the PDF document or feel free to contact us.
San Electro Switched Capacitor Voltage Converter MAX1044
Operation is guaranteed from 1.5V to 10V without an external diode over the entire temperature range.
It consists of a symbol board (magnet) and a reed switch, and is an analog/digital converter that converts information about the position (angle) of the rotating shaft into a digital quantity.
The rotation amount (angle) is output directly as a BCD signal. The output value can be read in decimal from the main window. No power supply is required. You can choose between 3-digit and 4-digit types.
One unit can perform both step-up and step-down conversion bidirectionally! High efficiency of over 94% maximum.
【Features】 ● High safety and advantageous for noise countermeasures with input/output isolation type ● High step-up and step-down of 320V/48V with bidirectional 2.5kW ● Achieves high efficiency of over 94% in bidirectional conversion through optimization by digital control ● Capable of autonomous operation that automatically switches conversion direction to maintain constant input/output voltage ● Fast switching of conversion direction possible without stopping the converter ● Capable of current, voltage, conversion direction control, and status monitoring via serial communication (RS485) ● Can operate in parallel ● Space-saving 1U full rack
100/150W DC-DC converter Input 66-160V - Output 5/12/24V
MeanWell AC/DC power supply from a Taiwanese power supply manufacturer. <Features> The CQB100-110S and CHB150-110S series are suitable for railway applications. The CQB100-110S and CHB150-110S series offer output power of 100-150W in a quarter-brick size and half-brick package footprint. The CQB100-110S and CHB150-110S series have Input: 66-160Vdc, single input Output voltage range: 5V, 12V, 24VDC single output. Standard features include high remote on/off, maximum efficiency of 92%, 2250Vdc I/O isolation, and protections such as OVP/OCP/OTP and short-circuit protection. All models are RoHS compliant, carry the CE mark, and meet safety standards UL60950-1, EN60950-1, and IEC60950-1. For more details, please contact us below or download the catalog.
1W ± Dual Output Isolated DC/DC Converter, Especially Required for Space Saving
1. Low ripple noise 2. Short circuit protection with automatic recovery function 3. Electrostatic resistance: ±6KV 4. Line regulation: ±1.2% 5. Low power consumption mode at light load 6. Ultra-small SMD package
Space-saving 1W ± dual output/single output isolated DC/DC converter.
1. Low ripple noise 2. Short circuit protection with automatic recovery function 3. Electrostatic resistance: ±8KV 4. Line regulation: ±1.2% 5. Low power consumption mode at light load 6. Ultra-compact SIP package
Space-saving 2W single output isolated DC/DC converter
1. Low ripple noise 2. Short circuit protection with automatic recovery function 3. Electrostatic resistance: ±6KV 4. Line regulation: ±1.2% 5. Low power consumption mode at light load 6. Ultra-compact SMD package
Space-saving 2W ± dual output/single output isolated DC/DC converter
1. Low ripple noise: 60mVp-p 2. Short circuit protection with automatic recovery function 3. Electrostatic resistance: ±8KV 4. Line regulation: ±1.2% 5. Low power consumption mode at light load 6. Ultra-compact SIP package
1W single output isolated DC/DC converter that is particularly space-saving.
1. Low ripple noise: 60mVp-p 2. Electrostatic resistance: ±8KV 3. Line regulation: ±0.25%
1W single output isolated DC/DC converter that particularly requires space-saving.
1. Low ripple noise: 60mVp-p 2. Electrostatic resistance: ±6KV 3. Line regulation: ±0.25%
Space-saving non-isolated DC/DC converter that is particularly needed.
1. Low ripple noise: 20mVp-p 2. High efficiency: 96% 3. Short circuit protection with automatic recovery function 4. Negative output possible 5. Low standby consumption 6. No heat sink required 7. Ultra-compact SIP package
Space-saving 1W 2:1 wide input ± dual output/isolated single output DC/DC converter.
1. EMI Standard: CISPR22/EN55022 CLASS B 2. Short circuit protection with automatic recovery function 3. Low noise: 55mVp-p 4. Remote ON/OFF 5. SIP package
SIC driver dedicated DC/DC converter
1. Ultra-low ceramic capacitor 2. Usable with zero load 3. High efficiency: 83% 4. Short circuit protection with automatic recovery function 5. Ultra-compact SIP package
IGBT driver dedicated DC/DC converter
1. Ultra-low ceramic capacitor 2. Usable with zero load 3. Short-circuit protection with automatic recovery function 4. Ultra-compact SIP package
Output current 500 to 2000 mA, ultra-low power consumption at no load.
At zero load, ultra-low power consumption, high efficiency, low heat generation, ultra-compact, energy-saving.
High-efficiency AC/DC converter certified with international standards for medical devices.
The MAD/MDD/MED/MUD/MAF/MDF/MEF/MUF series manufactured by Power Mate is an isolated AC/DC converter that has obtained certification for medical safety standards ANSI/AAMI ES60601-1 and IEC/EN60601-1 (3rd edition). It supports a universal input range (85-264VAC, 47-63Hz) and achieves high efficiency, low noise, and high reliability, making it suitable for various applications beyond just medical devices.
High-efficiency DC/DC converter certified to international standards for railway industry equipment.
The Power Mate FKC08W/RED20W/FED40W/HAExxW/QAExxW/WAD150W/WAF150W series is an isolated DC/DC converter that has obtained certification for the railway standard EN50155 and the safety standard for information technology equipment EN/UL/IEC60950-1. It supports a wide input range of 4:1 and achieves high efficiency, low noise, and high reliability, making it suitable for various applications beyond just railway industry equipment.
It is an adapter that converts the serial port of various devices to an Ethernet port.
The EZL-50L is an intelligent protocol converter that converts the serial port of microcontrollers and existing devices into a TCP/IP port.
It is an adapter that converts the serial port of various devices to an Ethernet port.
The CSE-H53N is an intelligent protocol converter that converts the serial port of existing equipment into a TCP/IP port.
Protocol converter that converts between RS-422/485 communication and Ethernet communication.
The CSE-H55N2 is an Ethernet protocol converter that intelligently converts between RS-422/485 communication and Ethernet communication.
USB Camera/Microphone to HDMI Converter Converts USB Camera/Microphone to HDMI!!
■Convert USB Camera/Microphone to HDMI!! Convert video from USB camera and audio from USB microphone to HDMI Scale up to 4Kp30 and output via HDMI (resolution settings available) USB 2.0 output also supported (video only) Controllable via USB/LAN (Web GUI) Controllable via RS232/REST API (commands) Compatible with Windows 7 and later/macOS 10.10 and later (UVC compliant) Video input capabilities Up to 1080p60 (YUYV, USB3.0) Up to 1080p30 (I420/YV12/NV12/MJPEG, USB3.0/2.0) Up to 1080p10 (YUYV, USB2.0) Video output capabilities HDMI 1.4 up to 4K30 (video/audio) USB 2.0 720p30 MJPEG UVC (video only)
Introducing the SFP-compatible serial to Ethernet converter "DN9840E"!
The "DN9840E" is a converter that supports SFP and converts RS232c/RS422/RS485 serial signals into Ethernet frames. By using the conversion between serial signals and Ethernet frames, you can control serial signals from a PC. Additionally, it allows for SNMP monitoring of the media converter and this device, and when combined with a contact adapter, parallel (contact) transmission is possible. 【Features】 ■ Converts RS232c/RS422/RS485 serial signals into Ethernet frames ■ Supports SFP ■ Allows SNMP monitoring of the media converter and this device ■ Enables parallel (contact) transmission when combined with a contact adapter *For more details, please refer to the PDF document or feel free to contact us.
Introducing a 100G media converter with remote monitoring capabilities that supports up to 8 lines of multiplex transmission!
The "DN100GE Series" is a media converter specifically designed for 100G. It enables high-speed transmission at 100Gbps and can improve allowable loss by up to approximately 20dB through the use of booster amplifiers, allowing for long-distance transmission. Additionally, it features the ability to change the emission wavelength of our optical module (CFP2-ACO) to any wavelength from the management unit mounted on our media converter chassis (DNSHD8E series), enabling multiplex transmission of up to 8 lines. 【Features】 ■ Capable of high-speed transmission at 100Gbps ■ Long-distance transmission possible with amplifiers ■ Remote monitoring function to check operational and power status ■ Capable of multiplex transmission of up to 8 lines ■ Link status can be monitored remotely ■ Can accommodate up to 4 units in a 19-inch rack, 1U size *For more details, please refer to the PDF document or feel free to contact us. We are currently developing a new product for the 100G media converter. For more information, please feel free to contact us.
![[New Product] Introducing network devices that excel in optical communication and surveillance applications.](https://image.mono.ipros.com/public/product/image/6f1/2001366160/IPROS90924527870014723270.png?w=280&h=280)
1G dedicated industrial media converter 'DN1400E', contact and analog signal/Ethernet converter 'DN9400E'
★CC-Link IE TSN ClassB/A Certification Obtained 1G Dedicated Industrial Media Converter 'DN1400E'★ The 'DN1400E' is a 1G dedicated type industrial media converter. It is the first media converter to support CC-Link IE TSN ClassB. It supports the construction of high-speed motion control systems for customers with a low-latency network. It has high noise resistance compliant with JISC61000-6-2, achieving stable communication that is resistant to noise. Operating as a repeater, it transfers data with the shortest possible delay. ★Contact/Analog Signal/Ethernet Converter 'DN9400E'★ The 'DN9400E' is a device that transmits contact and analog signals over IP. It allows control of contact output based on the conditions set for contact input and analog input. By outputting via Ethernet, it also supports remote monitoring from a central monitoring room. It enables the construction of simple sequences without complex programming and can be used for controlling circuit breakers or as alarm contacts. Additionally, in support of Modbus TCP, remote monitoring is achieved with a control and monitoring app for the DN9400E!
It can be used as a DC power supply and also as a regenerative load device.
The bidirectional AC/DC inverter/converter (with regenerative function) can be used as a DC power supply and can also be used as a regenerative load device. It can be used as a solar cell simulation power supply as an option. Custom manufacturing is possible according to capacity, voltage, etc. Available in open type or box storage. For more details, please download the catalog or contact us.
You can easily build an effective optical LAN for protecting against induced lightning damage and noise at a low cost.
【Product Features】 - No connectors are required for fiber optic connections. - Safe and easy connection and operation confirmation can be achieved with large-diameter optical fiber (POF core 1φ) and red LED (visible light) modules. - A cost-effective optical LAN can be easily constructed to effectively counter lightning damage and noise issues. 【Specifications】 - Transmission speed: 200 Mbps - Extension distance: Up to 60m - Light source: LED 650nm (visible light) - Optical fiber specifications: SI type POF (core diameter 900μm / cladding diameter 1000μm) *We will be exhibiting at the International Image Device Exhibition 2014. [Booth Number 66] We will be giving away high-quality sample products from COMOSS to 5 lucky visitors through a lottery. *If you would like an admission ticket, please request it through the contact form below.
It is a single-output DC-DC converter with an output of 6W to 10W.
The entire circuit is potted, resulting in excellent insulation, moisture resistance, and vibration resistance.
