Last Updated： Aggregation Period:May 27, 2026～Jun 23, 2026
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:May 27, 2026～Jun 23, 2026
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:May 27, 2026～Jun 23, 2026
This ranking is based on the number of page views on our site.
961～990 item / All 1378 items
[Free Demo Unit Available] The CSW-H85K is a protocol converter that converts the serial port of microcontrollers and existing devices to wireless LAN.
The CSW-H85K is equipped with the necessary functions for wireless LAN communication and Ethernet communication, allowing you to connect the CSW-H85K to the serial interface of RS232 devices to enable wireless LAN compatibility for those devices.
It is possible to connect to most PLC systems equipped with DeviceNet.
The DeviceNet 11-25VDC "ThinkTop" is a control head that includes indicator units and solenoid valves, controlling all types of process valves. It controls and supervises air valves and is mounted on top of the valve. It receives control signals from the PLC to the valve and sends feedback signals to the PLC, indicating when the valve is in a specific position. To adapt the sensor board to specific valves and applications, the user can set up the ThinkTop using either a local key or a keypad (available for separate order). There is no need to remove the upper unit while using the keypad. For more details, please download the catalog.
High-frequency oscillation frequency! A coil of size 0.8×0.45mm can be used.
The "XC9290/XC9291 Series" is a 600mA synchronous rectification DC/DC converter that employs HiSAT-COT control. By increasing the oscillation frequency, it aims to reduce the mounting area while achieving efficiency equal to or greater than conventional products through improvements in on-resistance and current consumption. This makes it suitable for devices that require a compact and low-profile design, as well as battery-operated devices such as mobile equipment. 【Features】 ■ HiSAT-COT control ■ Ultra-compact ■ 600mA ■ Step-down *For more details, please refer to the PDF document or feel free to contact us.
For devices that prioritize high efficiency and battery operating time! Compatible with Green Operation.
The "XCL233 Series" is a coil-integrated step-down synchronous rectification DC/DC converter that uses ultra-low current consumption circuits and PFM control. By integrating the control IC and coil, it achieves miniaturization, allowing for a space-saving power supply configuration with just two external capacitors. The ultra-low current consumption circuit and PFM control method enable high efficiency under light load conditions. 【Features】 ■ Ultra-low consumption ■ Output voltage switching function ■ 150mA ■ Coil-integrated step-down *For more details, please refer to the PDF document or feel free to contact us.
Can be started with an input voltage of 0.9V! The output voltage can be set in the range of 1.8 to 5.5V in 0.1V steps.
The "XCL104/XCL105 Series" is a coil-integrated boost synchronous rectification DC/DC converter that incorporates a 0.17Ω N-channel driver FET and a 0.23Ω P-channel synchronous rectification switch FET. It can start from an input voltage of 0.9V and is designed for use with a single alkaline or nickel-hydride battery. The output voltage can be set in the range of 1.8 to 5.5V in 0.1V steps. 【Features】 ■1.4A ■Coil-integrated ■Boost ■Green Operation compatible *For more details, please refer to the PDF materials or feel free to contact us.
A media converter that efficiently realizes network construction at a low cost. We will introduce methods to maximize benefits with minimal capital investment.
◆◆Media converters are the key to achieving cost-effective network integration◆◆ LAN cables are virtually the industry standard for wiring in local area networks (LAN). LAN cables have evolved to support Ethernet speeds of 10 gigabits and above. In the use case analyzed in this white paper, fiber optic cables emerge as the optimal choice for building a LAN. By using media converters, you can extend the distance of the LAN with fiber optics while enhancing network security and connecting fiber optics to the desktop. This document explains how to integrate LAN cables and fiber optic cables in new or existing IT infrastructure to maximize benefits with limited capital investment.
This is a PoE-compatible media converter that converts 10/100/1000BASE-T to 1000BASE-SX!
Model Number: LPS500A-MM-LC-R3 ■ Maximum 30W, supports 802.3at ■ Compliant with EN62368 ■ Supplies power to PoE devices via CATx link ■ Monitors signal loss on both receiving ports of LAN cables and fiber with link failure pass-through ■ Prevents loss due to data transmission over invalid links with remote fault detection ■ Supports 802.3x flow control on full-duplex ports and back pressure on 10BASE-T/100BASE-TX half-duplex ports ■ Jumbo frame support (2 KB in normal mode, 9 KB in cut-through mode) ■ Warranty: Free 2-year send-back service
Transmit serial signals via Ethernet frames! Monitoring and configuration of media converters implemented in racks with SNMP monitoring functionality is possible!
The "DN9830E" is a serial-to-Ethernet converter that effectively utilizes the transmission path by converting serial signals into Ethernet frames. It enables the transmission of RS232C/RS422/RS485 serial signals as Ethernet frames (TCP/IP or UDP). 【Main Features】 ■ When using the Socket communication APP, serial signals can be controlled from a PC through the conversion between serial signals and Ethernet. ■ SNMP monitoring is possible by connecting the Ethernet port to an SNMP manager. ■ Parallel transmission and contact input synchronization By combining with a contact adapter, parallel signals can be transmitted as UDP Ethernet frames. In combination with a contact input adapter and a 2-port selector, it is also possible to switch the path of the 2-port selector in sync with the contact input status.
Introducing the compact design of the small and lightweight "DN2800E Series"!
The "DN2800E series" is a media converter specifically designed for 100M use. It has a wide operating temperature range and can be economically converted to optical. Additionally, as a repeater type, it can transmit regardless of packet length and can also transmit VLAN-tagged packets. Furthermore, it can be directly mounted into our media converter chassis (each series of DNHDxE), making it suitable for storage in a 19-inch rack or for fixing to a DIN rail, while featuring a compact design that is small and lightweight. 【Features】 ■ Media converter specifically designed for 100M use ■ Wide operating temperature range and economical optical conversion ■ As a repeater type, it can transmit regardless of packet length ■ Capable of transmitting VLAN-tagged packets ■ Compact design that is small and lightweight *For more details, please refer to the PDF document or feel free to contact us.
Achieve stable communication resistant to noise! An industrial media converter compatible with DIN rail mounting.
The "DN2400E" is an industrial media converter dedicated to 100M. It is an industrial model with high environmental resistance and is compatible with DIN rails. It has high noise resistance in accordance with JISC61000-6-2, and operates as a repeater, enabling data transfer with the shortest delay. 【Features】 ■ 100M dedicated type media converter ■ Industrial model with high environmental resistance ■ High noise resistance in accordance with JISC61000-6-2 ■ Low-latency transmission through repeater operation ■ Available in board state ■ Board moisture-proof coating *For more details, please refer to the PDF document or feel free to contact us.
Achieve small-scale control and monitoring without a PLC! No complicated programming required!
The DN9400E is a device that converts contact and analog signals into IP for transmission. It allows for contact output control based on the conditions set for contact input and analog input. By outputting via Ethernet, it also supports remote monitoring from a central monitoring room. Simple sequences can be constructed without complex programming, and it can be used for controlling circuit breakers and alarm contacts. Additionally, we have released a control and monitoring app for the DN9400E that supports Modbus TCP! [Usage Image] ◎ Monitoring and control of power receiving and transforming equipment (breaker trip, major faults, minor faults, current values, switches) ◎ Water level monitoring and control in hydropower plants (water level measurement sensors, dust removal equipment) ◎ Control of air conditioning systems [Features] ■ IP conversion of contact and analog signals (8ch contact input, 4ch contact output, 4ch analog current input) ■ Power supply (DC24V) for sensors connected to this product ■ Capability to store approximately 3,000 event logs in main memory ■ Contact synchronization function ■ Pulse counter function ■ Current redundancy, AC adapter, DIN rail compatible ■ Modbus TCP compatible ■ Control and monitoring app released
Electronic patent investigation report on the "offensive" and "defensive" stages of commercialization!
We have investigated publicly available patents related to "bidirectional converters" issued from January 2018 to April 2019, and we provide a rich patent map that is easy to use for presentations and internal meetings using the Mind Map® method. An overview of the big picture and a close-up of detailed information. You can dynamically switch perspectives to examine industry trends and technological changes from patent information. [Targeted Technologies] - Patent information featuring bidirectional circuits - Only converter circuits with DC output (AC/DC or DC/DC) are included - Focused on circuit technology, excluding bidirectional elements and heat dissipation mechanisms - Assumes power in the W to kW range - Includes patent information that is relevant to bidirectional converters *For more details, please download the PDF or feel free to contact us.
Ultra-compact SMD surface mount with short-circuit protection function - "A reliable Chinese company"
The constant voltage input, isolated non-constant voltage single circuit output DC-DC converter power supply has the following features: ○ Ultra-compact SMD surface mount ○ Continuous short-circuit protection ○ Internal unit design ○ No external components required ○ International standard terminals ● For more details, please download the catalog or contact us.
Wide input voltage range, ultra-compact, SIP surface mount, output can be turned off.
Wide range voltage input, isolated constant voltage plus-minus single circuit output DC-DC converter power supply ○ Wide input voltage range ○ Ultra-compact SIP surface mount ○ Short circuit protection (automatic recovery) ○ Output can be cut off ○ High output density ● For more details, please download the catalog or contact us.
1W single output isolated DC/DC converter that particularly requires space-saving.
1. Low ripple noise 2. Short circuit protection with automatic recovery function 3. Electrostatic resistance: ±8KV 4. Line regulation: ±1.2% 5. Low power consumption mode at light load 6. Ultra-compact SIP package
Space-saving 2W ± dual output/single output isolated DC/DC converter.
1. Low ripple noise: 60mVp-p 2. Short circuit protection with automatic recovery function 3. Electrostatic resistance: ±8KV 4. Line regulation: ±1.2% 5. Low power consumption mode at light load 6. Ultra-compact SIP package
1W single output isolated DC/DC converter that particularly requires space-saving.
1. Low ripple noise: 60mVp-p 2. Short circuit protection with automatic recovery function 3. Electrostatic resistance: ±8KV 4. Line regulation: ±0.25% 5. Ultra-small SMD package
Space-saving non-isolated DC/DC converter that is particularly needed.
1. Low ripple noise: 25mVp-p 2. High efficiency: 97% 3. Short circuit protection with automatic recovery function 4. Negative output possible 5. Low standby consumption 6. No heat sink required 7. Ultra-compact SIP package
DC/DC converters for solar power generation rated at 5W, 10W, and 15W for unstable voltage conditions.
1. High efficiency, ultra-low ripple noise 2. Reverse input protection 3. Output trimming function, with short circuit protection 4. Compliant with CE standards and RoHS directive
High-efficiency DC/DC converter certified with international standards for medical devices.
The MOP/MPP series from Power Mate is an isolated DC/DC converter that has obtained certification for medical safety standards ANSI/AAMI ES60601-1 and IEC/EN60601-1 (3rd edition), as well as for information technology equipment safety standards EN/UL/IEC60950-1. It supports an input range of 2:1 or a wide 4:1, and achieves high efficiency, low noise, and high reliability, making it suitable for various applications beyond just medical devices.
We offer a wide range of power solutions for various applications, including medical and railway use! *Materials are available for each industry!
We introduce the DC/DC converters and power products manufactured by P-DUKE, handled by Shinadain Co., Ltd. P-DUKE's unique high-density mounting technology achieves both ultra-miniaturization of packages and high insulation voltage resistance. For medical products certified to the medical standard IEC60601-1 2MOPP, we achieve an insulation voltage resistance of 5000VAC and a creepage distance of 8mm. For railway products that have obtained the railway safety standards EN50155/EN45545-2, we offer high-performance products with ultra-wide input ranges of 9-75VDC/14-160VDC and an insulation voltage resistance of 3000VAC. We provide optimal power solutions with a wide lineup ranging from ultra-compact SMD package products of 1W to 5W to high-performance medical and railway products.
DC-DC converter using block terminal blocks (harmonica terminals) for input and output.
The "SDX Series / AG Series" are unit-type DC-DC converters that use block terminal blocks (harmony terminals) for input and output. The "SDX Series" offers single outputs ranging from 50 to 400W and is designed for integration into DC input devices requiring high reliability at 24V, 48V, and 110V. The "AG Series" provides a single output of 50W with a wide input range of DC 10 to 32V, allowing for shared input at 12V and 24V. 【Features】 [SDX Series] ○ Natural air cooling and a wide operating temperature range (-20℃ to +60℃) ○ No use of aluminum electrolytic or tantalum capacitors ○ Achieves 800W capacity through parallel connection units [AG Series] ○ Natural air cooling ○ Seismic reinforcement specifications (component bonding, through-hole circuit board) For more details, please contact us or download the catalog.
Energy loss is reduced because power conversion is completed in one step! More energy-efficient than inverter systems.
Let me introduce you to the "Matrix Converter." An inverter converts alternating current (AC) power input from an external AC power source into direct current (DC) power, and then further converts it into suitable alternating current (AC) power for output. As a result, energy loss due to power conversion occurs twice. On the other hand, a matrix converter can directly convert the input alternating current power into suitable alternating current power for each electrical device. Therefore, energy loss due to power conversion occurs only once, improving power conversion efficiency. 【Features】 ■ Directly converts alternating current power into suitable alternating current power for each electrical device ■ Energy loss due to power conversion occurs only once ■ Improved power conversion efficiency *For more details, please download the PDF or feel free to contact us.
SMD/DIP terminal type insulated case on-board type DC/DC converter
The "SUC Series" is a high-efficiency, high-frequency switching, thin, lightweight, and compact on-board type DC/DC converter with insulation and casing. 【Features】 Available in surface mount (SMD) and through-hole mount (DIP) types Input-output isolation Overcurrent protection circuit included Remote control (SUS3, SUS6, SUS10) External output voltage adjustable No aluminum electrolytic or tantalum electrolytic capacitors used For more details, please contact us or download the catalog.
CE marking compliant! Built-in inrush current prevention circuit, built-in protection features (overvoltage, overheating protection).
The "DPF Series" is a module designed for AC front-end applications aimed at suppressing harmonic current and improving power factor with AC input. It features a high power factor of 0.98 (AC100V) and 0.95 (AC200V), compliant with IEC61000-3-2. It includes an inrush current prevention circuit and can operate in parallel (with a built-in current balancing function). It is compliant with CE marking and UKCA marking. Please feel free to contact us for inquiries. 【Features】 ■ High power factor: 0.98 (AC100V), 0.95 (AC200V), compliant with IEC61000-3-2 ■ High efficiency: 90% (AC100V), 95% (AC200V) ■ Input voltage range: AC85–264V (continuous input possible) ■ Inrush current prevention circuit built-in ■ Parallel operation possible (with built-in current balancing function) *For more details, please refer to the PDF document or feel free to contact us.
Stable power supply even in high-temperature environments! Smart PCB design with the compact and low-profile MU series.
The MU series is the latest generation of compact, low-profile DC-DC converters. They can operate stably even in high-temperature environments of up to 100°C*, and have received positive feedback for use in devices such as smart IoT equipment and security devices, where high-density mounting is required. Additionally, considering the design flexibility of customer boards, both SMD and DIP types are available, allowing for flexible selection based on the mounting method. [Main Features] ■ Wide operating ambient temperature range: -40°C to +100°C (varies by model)* ■ Selectable terminal shapes: Surface Mount (SMD) / Through-Hole Mount (DIP) ■ Thin and lightweight design with high-frequency switching ■ Safe input-output isolation type ■ Extensive lineup: 96 types in total *For more details, please refer to the PDF document or feel free to contact us. Keywords: COSEL, FA equipment, industrial equipment, sensors, control equipment, robots, motors, machine tools, IoT, measuring instruments
Yutaka Electric Manufacturing's DC-DC converter "YDS Series" that supports power supply design for various electronic devices.
◆Yutaka Electric Manufacturing Co., Ltd. Yutaka Electric Manufacturing Co., Ltd. is a power supply manufacturer that boasts the No. 1 domestic market share in small and medium-sized uninterruptible power supplies (UPS). The company handles everything from the development to the manufacturing of switching power supplies, UPS, and DC-DC converters, providing high-quality power products as a member of the Nichicon Group. ◆Product Features (Characteristics of the YDS Series) - High-efficiency design reduces heat generation, contributing to improved device reliability - Compact packaging reduces board space, achieving device miniaturization - A rich lineup of output voltage options accommodates diverse circuit configurations - Equipped with protection circuits for overcurrent and overheating, ensuring safety - High durability and long lifespan design suitable for industrial applications - Low noise and stable output prevent malfunction of electronic devices - Shape designed for easy board mounting, enhancing design flexibility for power circuits - Offers both non-isolated and standard series, allowing for selection based on application needs
The non-isolated DC-DC converter YDS300V series from Yutaka Electric Manufacturing supports stable power supply and flexibly responds to various device designs.
◆Yutaka Electric Manufacturing Co., Ltd. Yutaka Electric Manufacturing Co., Ltd. is a power supply manufacturer that boasts the No. 1 domestic market share in small and medium-sized uninterruptible power supplies (UPS). The company is involved in the development and manufacturing of switching power supplies, UPS, DC-DC converters, and more, providing high-quality power products as a member of the Nichicon Group. ◆Product Features - Supports high voltage input of 300V class, achieving stable output of 5V/12V/24V - Compact and lightweight as a non-isolated DC-DC converter with a maximum output of 3A - Reduces heat generation through high-efficiency design, contributing to space-saving of devices - Designed to safely and reliably generate low voltage from high voltage systems - Quality that supports stable operation even in harsh environments, such as industrial equipment and energy-related devices
High-efficiency DC/DC converter for hybrid/electric vehicles
The DCC3 converts stable low voltage from high voltage for auxiliary systems in electric and hybrid vehicles. The DCC3 converter supports input voltages from 250 to 900V, outputs secondary voltages for 12V and 24V systems, and is adjustable. The DCC3 is designed to be robust and compact, making it suitable for a wide range of applications with flexibility. Additionally, galvanic isolation between high and low voltage enhances the reliability and safety of the system. The proprietary software platform of the ZAPI Group allows for advanced customization by flexibly combining standard features, while also complying with stringent functional safety requirements.
