We have compiled a list of manufacturers, distributors, product information, reference prices, and rankings for core.
ipros is IPROS GMS ・ IPROS One of the largest technical database sites in Japan that collects information on.

core(roll) - List of Manufacturers, Suppliers, Companies and Products

core Product List

1～7 item / All 7 items

Displayed results
SATA Device ADCI IP Core for FPGA and ASIC

SATA Device ADCI IP Core for FPGA and ASIC

Supports power modes (partial/slumber)! The DATA interface uses FIFO.

We would like to introduce our "FPGA/ASIC IP Core for SATA Device ADCI." This is an IP core for SATA devices that complies with the SATA 3.3 standard and supports a maximum transfer rate of 6Gbps (600MB/s). It features an ADCI (Advanced Device Controller Interface) that allows for easy operation via processors/firmware, making it suitable for a wide range of SATA storage device solutions. 【Specifications (Excerpt)】 ■ Complies with SATA Revision 3.3 standard (1.5Gbps, 3.0Gbps, 6.0Gbps) ■ Supports Application layer, Transport layer, Link layer, and Phy layer, including ADCI ■ Supports OOB (Out of Band) ■ Uses FIFO for DATA interface *For more details, please download the PDF or feel free to contact us.

  • ASIC

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
SATA Host AHCI IP Core for FPGA/ASIC

SATA Host AHCI IP Core for FPGA/ASIC

It can widely support systems that require a SATA host!

The "IP Core SATA Host AHCI for FPGA/ASIC" complies with the SATA 3.3 standard and supports a maximum transfer rate of 6Gbps (600MB/s) for SATA hosts. With the AHCI interface, it can be easily connected using standard drivers. Additionally, it consists of the SATA core [Phy layer, LNK layer, TRN (Transport) layer], SATA host application, and AHCI layer. 【Specifications (Excerpt)】 ■ Complies with SATA Revision 3.3 standard (1.5Gbps, 3.0Gbps, 6.0Gbps) ■ Supports OOB (Out of Band) ■ Supports either SerDes, PIPE, or SAPIS interfaces ■ Supports power modes (partial/slumber) ■ Equipped with self-test functionality *For more details, please download the PDF or feel free to contact us.

  • ASIC

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
IEEE1588-2008 PTP Time Synchronization IP Core

IEEE1588-2008 PTP Time Synchronization IP Core

Providing IEEE1588-2008 PTP time synchronization solutions as an IP core. Synchronizing devices on Ethernet (LAN) with nanosecond precision.

Oregano Systems offers timing synchronization solutions compliant with IEEE1588-2008 Precision Time Protocol as IP CORE. It provides syn1588 Clock_S for serial connection to external CPUs and syn1588 Clock_M for parallel connection, available in netlist or source code. Synchronization in the nanosecond range over Ethernet is possible. Support for 802.1AS will be available starting summer 2016.

  • syn1588 Clock_M GMII.jpg
  • LAN construction and wiring work

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
NVMe-to-SATA Bridge

NVMe-to-SATA Bridge

Available for LBA remapping, data encryption, data compression, and endpoint aggregation!

We would like to introduce the 'NVMe-to-SATA Bridge' handled by Fujisoft Inc. This product is an IP core for creating an NVMe-to-SATA protocol bridge using NVMe Host IP core and SATA AHCI Host IP core. In this architecture, a sandbox area is implemented in the bridge, allowing for the implementation of custom logic and firmware. 【Specifications (Excerpt)】 ■ NVMe protocol interface complies with NVMe 1.4 standard ■ SATA interface complies with SATA 3.3 specification ■ Supports industry-standard AHCI (Advanced Host Controller Interface) v.1.3.1 ■ Compatible with third-party PCIe Root Complex IP cores ■ Supports automatic initialization using PCIe hard blocks *For more details, please download the PDF or feel free to contact us.

  • ASIC

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
DapTechnology's FireGate PHY Layer Core

DapTechnology's FireGate PHY Layer Core

FireGate is an IP core that complies with IEEE-1394b and supports all AS5643 requirements.

Advantages of implementing a complete 1394 I/O interface using FPGA Standalone solution: By combining PHY IP with link layer IP, it is possible to create smaller products. Additional components can be added to create a system-on-chip (SoC) solution. Flexible number of ports: Commercially available PHY chips have a fixed number of ports, which is often excessive for small peripherals. On the other hand, host adapters are likely to benefit from three or more ports, and hubs can have even more ports. In the case of PHY based on FPGA technology, users can customize the number of ports as needed. Optional debugging and testing features: Optionally, debugging and testing features such as BERT (Bit Error Rate Testing) can be included. Field upgradable: The FPGA used is field-upgradable, allowing new features and bug fixes to be added even when the device is already in the field. Cost-effective ASICs: Once the design is complete, the IP solution provides a very cost-effective way to spin custom ASICs.

  • others

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
DapTechnology FireLink LLC IP Core

DapTechnology FireLink LLC IP Core

FireLink is a link layer controller IP core compliant with IEEE-1394b.

FireLink, a synthesizable IEEE-1394-2008 beta link layer controller (LLC) core, is based on the link layer controller that has been used in DapTechnology's FireSpy analyzer products for several years. FireLink is a mature core implemented on FPGAs from Xilinx, Altera, and Microsemi. FireLink is available in three configurations: Basic, Extended, and GPLink. ■Japanese technical documentation for AS5643 is available. If you would like to see it, please contact sales@nacelle.co.jp■

  • others

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
IP core "AndesCore N22"

IP core "AndesCore N22"

There are configurable settings that allow for trade-offs between core size and performance requirements!

The "AndesCore N22" is a 32-bit, dual-stage pipeline CPU IP core based on the AndeStar V5 architecture, designed for embedded applications that require low power consumption and small circuit size. It complies with RISC-V technology and features several efficient performance capabilities, including simple dynamic branch prediction, instruction cache, and local memory. Additionally, it comes with a rich set of optional features such as a JTAG debug interface for development support. 【Specifications (partial)】 ■ AndeStar V5/V5e Instruction Set Architecture (ISA) based on RISC-V technology ■ Supports RV32IMAC/EMAC ■ Andes extensions that enable high performance and high functionality ■ 32-bit, dual-stage pipeline CPU architecture ■ High code density with mixed 16/32-bit instruction formats *For more details, please refer to the related links or feel free to contact us.

  • ASIC

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Search Keywords Related to core

COPYRIGHT © 2001-2025 IPROS CORPORATION ALL RIGHTS RESERVED.