We have compiled a list of manufacturers, distributors, product information, reference prices, and rankings for glue.
ipros is IPROS GMS ・ IPROS One of the largest technical database sites in Japan that collects information on.

glue×積水フーラー - List of Manufacturers, Suppliers, Companies and Products

glue Product List

1～12 item / All 12 items

Displayed results
Olefins-based hot melt adhesive for packaging "Advantra Series"

Olefins-based hot melt adhesive for packaging "Advantra Series"

Excellent thermal stability and reduction in application amount! Compatible with a wide range of line speeds from high to low!

The "Advantra Series" is a hot melt adhesive that excels in viscosity stability under heat, with very little gelation and carbonization. This allows for the maintenance of a stable bead size, improved line production efficiency, and reduced maintenance costs. Compared to conventional general-purpose EVA hot melt adhesives, it reduces stringing and contributes to minimizing negative impacts on casers and peripheral equipment. There is no longer a need to differentiate product numbers based on line speed, simplifying inventory management and reducing stock levels. 【Features】 ■ Excellent thermal stability ■ Reduced stringing ■ Wide adhesive suitability ■ Low VOC and low odor *For more details, please feel free to contact us.

  • glue

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Floor joist and floor finish adhesive '#55-S'

Floor joist and floor finish adhesive '#55-S'

Both hand-pressed and gun-applied are acceptable! This adhesive can be cleanly removed even if it gets on the floor surface.

"#55-S" is an adhesive suitable for bonding floor joists, wood floor finishing materials, and steel or plastic supports in construction and interior work. Due to minimal changes in adhesive viscosity with temperature variations, it eliminates issues such as dripping, stringing, and difficulty in extrusion during winter. Compared to conventional adhesives for wood floor finishes, it does not exhibit the foaming phenomenon during curing like urethane-based adhesives, and there is almost no shrinkage like that seen in water-based or solvent-based adhesives. 【Features】 ■ Can be removed even if adhesive adheres to the surface of flooring materials ■ Non-formaldehyde product compliant with building standards ■ Does not contain 13 substances classified as volatile organic compounds (VOCs) ■ Cured material maintains high elasticity, is resistant to impact and vibration, absorbs stress from expansion and contraction between bonded materials, and is highly durable ■ Good workability for application not only with a cartridge gun but also with hand squeezing *For more details, please feel free to contact us.

  • glue

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
New Olefin-based Hot Melt Adhesive "Clean Melt Series" for Packaging

New Olefin-based Hot Melt Adhesive "Clean Melt Series" for Packaging

Introduction of hot melt adhesives that reduce equipment power consumption with improved thread drawing and carbonization suppression!

The "Clean Melt Series" is a new olefin-based hot melt adhesive for cleaning packaging machines and applicators. As a result of significantly reducing stringing, it keeps casers and surrounding equipment clean even after continuous use, achieving a reduction in cleaning and maintenance frequency. We offer "PHC-8460," which generates less stringing and is considerate of equipment, and "PHC-8461," which has high coating performance at low temperature settings and is mindful of both the global environment and the working environment. 【PHC-8460 Features】 ■ General-purpose type ■ Significant reduction in stringing ■ Achieves reduced cleaning and maintenance frequency ■ Adhesive performance that meets a wide range of storage conditions from low to high temperatures ■ Usable for various applications from frozen goods to beer and beverages *For more details, please feel free to contact us.

  • glue

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Olefins-based hot melt adhesive for packaging "SDAIN 88 Series"

Olefins-based hot melt adhesive for packaging "SDAIN 88 Series"

Compared to EVA-based hot melts, the adhesive strength has improved! By reducing cleaning frequency, it contributes to increased production efficiency.

The "Esdine 88 Series" offers improved heating stability compared to EVA-based hot melts, resulting in a hot melt with very little gelation and carbonization. By achieving both a long open time and a fast set time, there is no need to differentiate product numbers based on line speed or ambient temperature. This simplifies inventory management and reduces stock levels. We offer the general-purpose "Esdine-8800" and the low-temperature application type "Esdine-8801." 【Features】 ■ Excellent heating stability ■ Contributes to reduced application amounts ■ Good machine (line) suitability ■ Wide range of adhesion performance *For more details, please feel free to contact us.

  • glue

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Interior construction adhesive "Sekisui Bond #72-A"

Interior construction adhesive "Sekisui Bond #72-A"

Non-formaldehyde products! They have excellent adhesion to various materials used in interior construction.

"Sekisui Bond #72-A" is a "fast-curing type" adhesive for interior construction that has low odor, is safe, and offers excellent work efficiency. The cured material maintains high elasticity, is resistant to impact and vibration, absorbs the stress of expansion and contraction between adhered materials, and is highly durable. It can be used as an adhesive in conjunction with double-sided tape methods or as a filling adhesive for uneven surfaces due to its high viscosity. 【Features】 - Non-formaldehyde product that considers building standards - Fast-curing type with low odor, safe, and excellent work efficiency - Excellent adhesion to various materials used in interior construction - Cured material maintains high elasticity, is resistant to impact and vibration, absorbs the stress of expansion and contraction between adhered materials, and is highly durable - "Health-conscious housing compatible product" that does not use 13 substances classified as volatile organic compounds (VOCs) that could harm health *For more details, please refer to the related link page or feel free to contact us.

  • glue

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Electronics Adhesive Catalog

Electronics Adhesive Catalog

A wide range of products including reactive hot melt adhesives and structural adhesives!

This catalog introduces H.B. Fuller’s adhesives for electronics. We offer a wide range of performance characteristics such as impact resistance, chemical resistance, water resistance, and temperature resistance, featuring a rich lineup including "reactive hot melt adhesives," "low-temperature curing adhesives," "light-curing adhesives," and "structural adhesives." Additionally, we also introduce "biological sensors and camera modules" and "flat panel displays." Please make use of this for selecting products. 【Featured Products (Excerpt)】 ■ Electronics Assembly Materials - Reactive hot melt adhesives - Low-temperature curing adhesives - Light-curing adhesives - Structural adhesives - Film-type adhesives - Printed circuit board (PCB) materials - Circuit board protection and sealing materials *For more details, please feel free to contact us.

  • glue

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Camera Module Adhesive Catalog

Camera Module Adhesive Catalog

High-performance adhesive for camera modules.

This catalog introduces H.B. Fuller’s adhesives for electronics. We have a wide range of products applicable to the latest camera modules, including those for housing bonding, active alignment, die attach, and FPC reinforcement. Please make use of this for product selection. 【Featured Products (excerpt)】 - Low-temperature curing adhesives - UV curing adhesives - UV/thermal or UV/moisture dual curing adhesives - Underfill materials, etc. *For more details, please feel free to contact us.

  • Other optical parts

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
One-component silicone-based elastic adhesive "Sekisui Bond #75-M"

One-component silicone-based elastic adhesive "Sekisui Bond #75-M"

Ideal for mirror installation work! Due to its high viscosity, it can also be used as a filling adhesive for uneven surfaces.

"SEKISUI BOND #75-M" is a one-component modified silicone-based elastic adhesive for mirrors. It maintains high elasticity, is strong against impact and vibration, and has excellent durability. Additionally, as a non-bleed type adhesive, it does not damage the painted surface of mirrors. Furthermore, it has a low odor and does not corrode metals, making it suitable for construction applications. 【Features】 ■ Non-formaldehyde product compliant with building standards ■ JAIA F☆☆☆☆ certified ■ Reduces on-site work processes ■ Absorbs stress from expansion and contraction between adhered materials ■ High-viscosity mastic type *For more details, please feel free to contact us.

  • glue

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Visible light curing adhesive for plastics "Clear Luce MA21"

Visible light curing adhesive for plastics "Clear Luce MA21"

The connected resin can be processed with heat bending and more! It expands the applications of transparent plastic products.

"Clear Luce MA21" is a one-component adhesive suitable for surface bonding of transparent resin sheets such as acrylic and polycarbonate, developed independently by our company. It is a solvent-free adhesive made solely from acrylic monomers, allowing for strong bonding without dissolving acrylic resin or polycarbonate, enabling the production of various adhesive products that were previously considered difficult. 【Features】 ■ Solvent-free ■ One-component type ■ Ultra-low viscosity ■ Quick bonding ■ Excellent light resistance ■ Visible light polymerization *For more details, please feel free to contact us.

  • others

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Epoxy resin-based putty adhesive "S-Dine Joiner W"

Epoxy resin-based putty adhesive "S-Dine Joiner W"

Economical and beautifully finished! It cures underwater and on wet surfaces, demonstrating excellent adhesion.

"Esdine Joiner W" is a joint filling material for concrete structures made by blending special materials with epoxy resin. With a simple application method, it can effectively stop water, resolving previous issues all at once. Sealing concrete segments in areas with heavy groundwater has also become much easier. It has excellent adhesion even on wet surfaces and possesses good underwater curing properties, making it revolutionary for underwater applications. 【Features】 ■ Can adhere directly to wet surfaces ■ Cures in water and seawater ■ No pre-treatment required, easy to apply ■ Economical with a beautiful finish *For more details, please feel free to contact us.

  • others

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Tile adhesive "Super Cement"

Tile adhesive "Super Cement"

This is an introduction to adhesives suitable for applications such as bonding tiles together and waterproofing at joints with walls!

"Super Cement" is an adhesive suitable for bonding and preventing displacement between tiles. There is no need for traditional methods such as "cement" or "plastering." Repair work for broken parts of tiles is also easy to carry out. It hardens in 1 to 3 days, which shortens the working days, and we offer four colors: black, gingro, new gingro, and shinch. [Features] - No need for cement or plastering - Easy to carry out repair work for broken parts of tiles - The hardened material is elastic, making it ideal for bonding and preventing displacement between tiles - Hardens in 1 to 3 days, reducing the number of working days *For more details, please feel free to contact us.

  • glue

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
One-component silicone-based elastic adhesive "Sekisui Bond #75"

One-component silicone-based elastic adhesive "Sekisui Bond #75"

Formaldehyde emission rate below 5 μg/m²h! It does not corrode metals, making it suitable for construction applications.

"Sekisui Bond #75" is an adhesive recommended by Sekisui for flooring and interior construction, taking health and environmental considerations into account. It is a multipurpose type that maintains high elasticity, is resistant to impact and vibration, absorbs the stress of expansion and contraction between adhered materials, and boasts excellent durability. Additionally, it can be easily removed from unnecessary areas such as the surface of the floor. It is easy to extrude even in winter, providing good workability. 【Features】 ■ Non-formaldehyde product compliant with building standards ■ JAIA F☆☆☆☆ certified ■ Low odor and does not corrode metals ■ Can be used as an adhesive in conjunction with double-sided tape ■ High-viscosity mastic type *For more details, please feel free to contact us.

  • glue

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Search Keywords Related to glue

COPYRIGHT © 2001-2025 IPROS CORPORATION ALL RIGHTS RESERVED.