glueのメーカーや取扱い企業、製品情報、参考価格、ランキングをまとめています。
イプロスは、 製造業 ・ BtoB における情報を集めた国内最大級の技術データベースサイトです。

glue(fpc) - メーカー・企業と業務用製品 | イプロスものづくり

更新日： 集計期間:Jul 22, 2026～Aug 18, 2026
※当サイトの各ページの閲覧回数を元に算出したランキングです。

glueの製品一覧

31～60 件を表示 ／ 全 64 件

表示件数
Aluminum casing conductive connection ONE-HAND MIXING

Aluminum casing conductive connection ONE-HAND MIXING

For grounding/GND connection to aluminum bodies. Automatically mixes two liquids with just a push, allowing for easy conductive connections at room temperature without the need for solder.

For those considering conductive connections to aluminum enclosures, aluminum bodies, and metal components: ONE-HAND MIXING offers an option for grounding and GND connections through application, even in areas where screwing or welding is difficult. ONE-HAND MIXING is a product that allows for the automatic mixing and dispensing of a two-component conductive epoxy adhesive with silver filler using a dedicated cartridge and mixer nozzle. - No weighing or mixing work is required, reducing variability in the mixing ratio by the operator. - It cures at room temperature, making it suitable for conductive connections around heat-sensitive resin parts, FPCs, LEDs, and sensors. - Conductive bonding is possible without using a soldering iron, even with materials that are difficult to solder, such as glass, resin, aluminum, and stainless steel. - It retains flexibility after curing, allowing for repairs and connections in areas subject to bending and vibration. *For detailed data, please check the TDS and the special website.

  • Repair Agent
  • Solder
  • glue
  • glue

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
No-screw ground connection ONE-HAND MIXING

No-screw ground connection ONE-HAND MIXING

When you want to establish a connection without using screws or terminals. Just press to automatically mix the two liquids, allowing for easy room temperature connections without solder.

For grounding connections where there is no space for screws, nuts, or crimp terminals, or where you want to reduce processes, ONE-HAND MIXING utilizes conductivity and adhesion to achieve easy electrical bonding to housings and components. ONE-HAND MIXING is a product that allows for the automatic mixing and dispensing of a two-component conductive epoxy adhesive with silver fillers using a dedicated cartridge and mixer nozzle. - No weighing or mixing work is required, which suppresses variations in the mixing ratio by the operator. - It cures at room temperature, making it suitable for conductive connections around heat-sensitive resin parts, FPCs, LEDs, and sensors. - Conductive bonding is possible without using a soldering iron, even with materials that are difficult to solder, such as glass, resin, aluminum, and stainless steel. - It retains flexibility after curing, making it usable for repairs and connections in areas subjected to bending and vibration. *For detailed data, please check the TDS and special website.

  • Repair Agent
  • Solder
  • glue
  • glue

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Field repair of poor connectivity ONE-HAND MIXING

Field repair of poor connectivity ONE-HAND MIXING

For repair work on connections, wiring, and patterns. Just press to automatically mix the two components, allowing for easy cold connections without the use of solder.

For continuity repairs on-site, such as poor contact, broken wiring, or missing circuit board patterns. ONE-HAND MIXING is suitable for small area repairs in prototyping, evaluation, and maintenance because it allows for quick use of the necessary amount. ONE-HAND MIXING is a product that automatically mixes and dispenses a two-component conductive epoxy adhesive with silver filler using a dedicated cartridge and mixer nozzle. - No weighing or mixing is required, which reduces variability in the mixing ratio by the operator. - It cures at room temperature, making it suitable for conductive connections around heat-sensitive resin parts, FPCs, LEDs, and sensors. - It enables conductive bonding to materials that are difficult to solder, such as glass, resin, aluminum, and stainless steel, without using a soldering iron. - It retains flexibility after curing, allowing it to be used for repairs and connections in areas subject to bending and vibration. *For detailed data, please check the TDS and special website.

  • Repair Agent
  • Solder
  • glue
  • glue

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Alternative connection to spot welding ONE-HAND MIXING

Alternative connection to spot welding ONE-HAND MIXING

For conductive connections that cannot be welded. Automatically mixes two liquids with just a push, allowing for easy conductive connections at room temperature without the use of solder.

For the conductive connection of components where spot welding and soldering are to be avoided. This method can be considered for structures where heat impact needs to be minimized, and during the prototype stage where equipment installation is difficult, using conductive adhesives. ONE-HAND MIXING is a product that allows for the automatic mixing and dispensing of a two-component conductive epoxy adhesive with silver filler using a dedicated cartridge and mixer nozzle. - No measuring or mixing work is required, reducing variability in the mixing ratio by the operator. - It cures at room temperature, making it suitable for conductive connections of heat-sensitive resin parts, FPCs, LEDs, and sensors. - Conductive adhesion is possible without using a soldering iron, even on materials that are difficult to solder, such as glass, resin, aluminum, and stainless steel. - It maintains flexibility after curing, allowing it to be used for repairs and connections in areas subjected to bending and vibration. *For detailed data, please check the TDS and special website.

  • Repair Agent
  • Solder
  • glue
  • glue

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
One-hand mixing for alternative conductive connection to rivets.

One-hand mixing for alternative conductive connection to rivets.

For connections with a structure that is difficult to rivet or crimp. Automatically mixes two liquids just by pressing, allowing for easy room-temperature conductive connections without the use of solder.

For conductive connections in structures where rivets, crimp terminals, and screws are difficult to use, ONE-HAND MIXING supports component design that requires miniaturization and space-saving by combining adhesive fixation through application and conductivity. ONE-HAND MIXING is a product that can automatically mix and dispense a two-component conductive epoxy adhesive with silver filler using a dedicated cartridge and mixer nozzle. - No need for measuring and mixing, which reduces variability in the mixing ratio by the operator. - Cures at room temperature, making it suitable for conductive connections around heat-sensitive resin parts, FPCs, LEDs, and sensors. - Enables conductive adhesion to materials that are difficult to solder, such as glass, resin, aluminum, and stainless steel, without using a soldering iron. - Retains flexibility after curing, allowing it to be used for repairs and connections in areas subject to bending and vibration. *For detailed data, please check the TDS and the special website.

  • Repair Agent
  • Solder
  • glue
  • glue

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
EMI shielded conductive connection ONE-HAND MIXING

EMI shielded conductive connection ONE-HAND MIXING

For connecting the shield material and the chassis ground. Automatically mixes two liquids with just a push, allowing for easy conductive connections at room temperature without the use of solder.

For conductive connections between EMI shielding materials, metal enclosures, and grounds. Even in areas where screw fastening or soldering is difficult, using conductive adhesive allows for space-saving shield and ground connections. ONE-HAND MIXING is a product that allows for the automatic mixing and dispensing of a two-component conductive epoxy adhesive with silver filler using a dedicated cartridge and mixer nozzle. - No need for measuring or mixing, reducing variability in the mixing ratio by the operator. - Cures at room temperature, making it suitable for conductive connections around heat-sensitive resin parts, FPCs, LEDs, and sensors. - Enables conductive bonding to materials that are difficult to solder, such as glass, resin, aluminum, and stainless steel, without the use of a soldering iron. - Maintains flexibility after curing, making it usable for repairs and connections in areas subject to bending and vibration. *For detailed data, please check the TDS and special website.

  • Repair Agent
  • Solder
  • glue
  • glue

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Defroster tab adhesive repair ONE-HAND MIXING

Defroster tab adhesive repair ONE-HAND MIXING

Restores terminal and tab disconnections with continuity. Automatically mixes two liquids with just a push, allowing for easy cold connections where solder cannot be used.

For repairs around terminals that cannot withstand heat or mechanical stress, such as the defroster tab of the rear window, we support urgent repairs and short delivery times with high adhesive strength and conductivity, made in Japan and available for immediate delivery. ONE-HAND MIXING is a product that allows for the automatic mixing and dispensing of a two-component conductive epoxy adhesive with silver filler using a dedicated cartridge and mixer nozzle. - No weighing or mixing is required, reducing variability in the mixing ratio by the operator. - It cures at room temperature, making it suitable for conductive connections around heat-sensitive resin parts, FPCs, LEDs, and sensors. - Conductive bonding is possible without using a soldering iron, even with materials that are difficult to solder, such as glass, resin, aluminum, and stainless steel. - It retains flexibility after curing, making it usable for repairs and connections in areas subjected to bending and vibration. *For detailed data, please check the TDS and the special website.

  • Repair Agent
  • Solder
  • glue
  • glue

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Solder-free connection ONE-HAND MIXING

Solder-free connection ONE-HAND MIXING

Components that are sensitive to heat can be connected at low temperatures. No weighing or manual mixing is required. Simply pressing a button automatically mixes the two liquids, allowing for easy connections at room temperature without the use of solder.

For electrical components, resin parts, flexible substrates, and other conductive connections that want to avoid solder heat. ONE-HAND MIXING can be utilized for conductive fixing and repair with reduced heating processes by applying and curing the necessary amount. ONE-HAND MIXING is a product that allows for the automatic mixing and dispensing of a two-component conductive epoxy adhesive with silver filler using a dedicated cartridge and mixer nozzle. - No weighing or mixing work is required, which suppresses variations in the mixing ratio by the operator. - It cures at room temperature, making it suitable for conductive connections around heat-sensitive resin parts, FPC, LEDs, and sensors. - Conductive adhesion is possible without using a soldering iron, even on materials that are difficult to solder, such as glass, resin, aluminum, and stainless steel. - It retains flexibility after curing, making it usable for repairs and connections in areas subjected to bending and vibration. *For detailed data, please check the TDS and special website.

  • Repair Agent
  • Solder
  • glue
  • glue

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
One-hand mixing for components sensitive to heat connection.

One-hand mixing for components sensitive to heat connection.

For connections where soldering is not possible. No weighing or manual mixing required. Just press to automatically mix the two components, making it easy to create conductive connections at room temperature without solder.

For those concerned about thermal damage to components and substrates and looking for alternatives to soldering for conductive connections, our room-temperature curing conductive adhesive contributes to improvements in prototyping, repairs, and small-scale production processes. ONE-HAND MIXING is a product that allows for the automatic mixing and dispensing of a two-component conductive epoxy adhesive with silver filler using a dedicated cartridge and mixer nozzle. - No weighing or mixing is required, reducing variability in the mixing ratio by the operator. - It cures at room temperature, making it suitable for conductive connections around heat-sensitive resin components, FPCs, LEDs, and sensors. - Conductive adhesion is possible without using a soldering iron, even on materials that are difficult to solder, such as glass, resin, aluminum, and stainless steel. - It retains flexibility after curing, making it usable for repairs and connections in areas subjected to bending and vibration. *For detailed data, please check the TDS and special website.

  • Repair Agent
  • Solder
  • glue
  • glue

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Conductive connection of components used in low-temperature environments ONE-HAND MIXING

Conductive connection of components used in low-temperature environments ONE-HAND MIXING

For conductive connections in cold environments and low-temperature equipment. Automatically mixes two liquids with just a push, allowing for easy conductive connections at room temperature without the use of solder.

For the conductive connections of components used in low-temperature environments, such as refrigeration and freezing equipment or devices used in cold regions. ONE-HAND MIXING maintains an adhesive strength of about 70% or more even in extreme low temperatures (−196℃) during rapid cooling and heating tests, making it a candidate for evaluating connection reliability in low-temperature environments. ONE-HAND MIXING is a product that allows for the automatic mixing and dispensing of a two-component conductive epoxy adhesive with silver filler using a dedicated cartridge and mixer nozzle. - No weighing or mixing work is required, reducing variability in the mixing ratio by the operator. - It cures at room temperature, making it suitable for conductive connections around heat-sensitive resin parts, FPCs, LEDs, and sensors. - It enables conductive adhesion to materials that are difficult to solder, such as glass, resin, aluminum, and stainless steel, without the use of a soldering iron. - It retains flexibility even after curing, making it usable for repairs and connections in areas subject to bending and vibration. * For detailed data, please check the TDS and special website.

  • Repair Agent
  • Solder
  • glue
  • glue

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Cold machine circuit repair ONE-HAND MIXING

Cold machine circuit repair ONE-HAND MIXING

For repairing disconnections and contacts in equipment used at low temperatures. Just press to automatically mix the two components, allowing for easy electrical connections at room temperature without the need for solder.

For repairing poor conductivity or disconnections in equipment and facilities used in cold environments. It has been confirmed that the adhesive layer functions stably even in environments where rapid temperature changes occur, avoiding solder heat with room temperature curing. This expands options for maintenance and on-site repairs. ONE-HAND MIXING is a product that allows for the automatic mixing and dispensing of a two-component conductive epoxy adhesive with silver filler using a dedicated cartridge and mixer nozzle. - No weighing or mixing work is required, reducing variability in the mixing ratio by the operator. - It cures at room temperature, making it suitable for conductive connections around heat-sensitive resin parts, FPCs, LEDs, and sensors. - Conductive bonding is possible without using a soldering iron, even with materials that are difficult to solder, such as glass, resin, aluminum, and stainless steel. - It retains flexibility after curing, making it usable for repairs and connections in areas subjected to bending and vibration. *For detailed data, please check the TDS and special website.

  • Repair Agent
  • Solder
  • glue
  • glue

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
No worry about burns with the conductive connection ONE-HAND MIXING

No worry about burns with the conductive connection ONE-HAND MIXING

No soldering iron required. Eliminate high-temperature work. Automatically mix two liquids with just a push, allowing for easy connections at room temperature without soldering.

For sites and educational purposes that want to avoid the risks of burns and component charring from high-temperature soldering iron work. ONE-HAND MIXING is a room-temperature curing type that does not require a heat source, allowing for application with a single-handed push, enabling safe electrical connections of wires and components. ONE-HAND MIXING is a product that automatically mixes and dispenses a two-component conductive epoxy adhesive with silver filler using a dedicated cartridge and mixer nozzle. - No weighing or mixing work is required, reducing variability in the mixing ratio by the operator. - It cures at room temperature, making it suitable for electrical connections around heat-sensitive resin components, FPCs, LEDs, and sensors. - Conductive bonding is possible without using a soldering iron, even on materials that are difficult to solder, such as glass, resin, aluminum, and stainless steel. - It retains flexibility after curing, making it usable for repairs and connections in areas subject to bending and vibration. *For detailed data, please check the TDS and special website.

  • Repair Agent
  • Solder
  • glue
  • glue

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Low-resistance connection approaching solder ONE-HAND MIXING

Low-resistance connection approaching solder ONE-HAND MIXING

Conductive adhesive with a volume resistivity of around 10⁻⁴ Ω·cm. Automatically mixes the two components just by pressing, allowing for easy electrical connections at room temperature without the need for soldering.

For applications where you want to minimize connection resistance even with conductive adhesives. ONE-HAND MIXING achieves a volume resistivity of 2×10⁻⁴Ω·cm at room temperature curing stability, approaching the conductivity of solder. It is suitable for conductive connections and repairs where low resistance is required. ONE-HAND MIXING is a product that allows for the automatic mixing and dispensing of a two-component conductive epoxy adhesive with silver filler using a dedicated cartridge and mixer nozzle. - No weighing or mixing work is required, reducing variability in the mixing ratio by the operator. - It cures at room temperature, making it suitable for conductive connections around heat-sensitive resin parts, FPCs, LEDs, and sensors. - Conductive bonding is possible without using a soldering iron, even on materials that are difficult to solder, such as glass, resin, aluminum, and SUS. - It retains flexibility after curing, making it usable for repairs and connections in areas subject to bending and vibration. *For detailed data, please check the TDS and special website.

  • Repair Agent
  • Solder
  • glue
  • glue

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Non-hazardous conductive adhesive ONE-HAND MIXING

Non-hazardous conductive adhesive ONE-HAND MIXING

Storage at room temperature is acceptable. A material with low management burden. Automatically mixes two components with just a push, allowing for easy connections at room temperature where solder cannot be used.

This is a conductive adhesive that does not fall under the category of pharmaceutical-grade hazardous substances and complies with RoHS and REACH regulations. It can be stored at room temperature, eliminating the need for refrigeration or freezing, which reduces the burden of storage, transportation, and management in universities, research institutions, and corporate environments. ONE-HAND MIXING is a product that allows for the automatic mixing and dispensing of a two-component conductive epoxy adhesive containing silver fillers using a dedicated cartridge and mixer nozzle. - No weighing or mixing is required, which minimizes variations in the mixing ratio by the operator. - It cures at room temperature, making it suitable for conductive connections in heat-sensitive resin parts, FPCs, LEDs, and sensor areas. - It enables conductive bonding to materials that are difficult to solder, such as glass, resin, aluminum, and stainless steel, without the use of a soldering iron. - It retains flexibility after curing, allowing for repairs and connections in areas subject to bending and vibration. *For detailed data, please refer to the TDS and the special website.

  • Repair Agent
  • Solder
  • glue
  • glue

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
[For DIY and Hobbies] One-Handed Use Room Temperature Curing Conductive Adhesive

[For DIY and Hobbies] One-Handed Use Room Temperature Curing Conductive Adhesive

No measuring or hand mixing required. Just press for a room temperature conductive connection.

In DIY and hobby electronics, precise connections of small components and handling of heat-sensitive materials are required. Particularly in tasks involving difficult-to-solder materials or delicate electronic components, accurate and reliable connections can significantly impact the performance and lifespan of the product. Traditional methods often faced challenges such as the labor involved in measuring and hand mixing, as well as variations in mixing ratios. ONE-HAND MIXING addresses these issues, allowing anyone to easily and reliably achieve electrical connections. 【Usage Scenarios】 - Wiring and component connections in electronics projects - Connections involving heat-sensitive resin parts, FPCs, LEDs, and sensors - Conductive bonding to materials that are difficult to solder, such as glass, resin, aluminum, and stainless steel - Repairs and connections in areas subject to bending or vibration 【Benefits of Implementation】 - Reduces the labor involved in measuring and mixing - Minimizes variations in mixing ratios by the operator, achieving stable conductivity performance - Safe and easy to work with, as soldering irons are not required - Maintains flexibility after curing, accommodating various applications

  • Repair Agent
  • Solder
  • glue
  • glue

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Wire and lead wire continuity fixation ONE-HAND MIXING

Wire and lead wire continuity fixation ONE-HAND MIXING

Fix thin wires with conductive adhesive. No weighing or hand mixing required. Just press to automatically mix the two components, making it easy to create conductive connections at room temperature without solder.

For applications where you want to secure the continuity of fine wires and lead wires without using solder or crimp terminals. ONE-HAND MIXING can be applied to the necessary areas to achieve both adhesion and conductivity, making it effective for connections around sensor electrodes and small components. ONE-HAND MIXING is a product that allows for the automatic mixing and dispensing of a two-component conductive epoxy adhesive with silver filler using a dedicated cartridge and mixer nozzle. - No weighing or mixing work is required, reducing variability in the mixing ratio by the operator. - It cures at room temperature, making it suitable for conductive connections around heat-sensitive resin parts, FPC, LEDs, and sensors. - It enables conductive adhesion to materials that are difficult to solder, such as glass, resin, aluminum, and stainless steel, without using a soldering iron. - It retains flexibility even after curing, allowing for repairs and connections in areas subject to bending and vibration. *For detailed data, please check the TDS and the special website.

  • Repair Agent
  • Solder
  • glue
  • glue

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Large Area Electrode Contact Stabilization ONE-HAND MIXING

Large Area Electrode Contact Stabilization ONE-HAND MIXING

For the adhesion and fixation of large electrodes for measurement. Automatically mixes two liquids with just a push, allowing for easy conductive connections at room temperature without the use of solder.

This is for applications where large electrodes in the 200-300mm range are closely adhered to materials, such as in dielectric property measurements. It helps suppress the micro-gaps that can easily occur with simple physical contact, thereby reducing measurement variability. The workability, which allows for easy position adjustment after application, is also appreciated. ONE-HAND MIXING is a product that allows for the automatic mixing and dispensing of a two-component conductive epoxy adhesive with silver filler using a dedicated cartridge and mixer nozzle. - No weighing or mixing work is required, which helps suppress variability in the mixing ratio by the operator. - It cures at room temperature, making it suitable for conductive connections around heat-sensitive resin parts, FPCs, LEDs, and sensors. - It enables conductive bonding to materials that are difficult to solder, such as glass, resin, aluminum, and stainless steel, without the use of a soldering iron. - It retains flexibility even after curing, making it usable for repairs and connections in areas subject to bending and vibration. *For detailed data, please check the TDS and special website.

  • Repair Agent
  • Solder
  • glue
  • glue

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Outdoor equipment continuity connection ONE-HAND MIXING

Outdoor equipment continuity connection ONE-HAND MIXING

Conductive adhesive with weather resistance test data. Automatically mixes the two components just by pressing, allowing for easy electrical connections at room temperature without the use of solder.

For grounding connections and continuity repairs of equipment and facilities used outdoors. We publish data on weather resistance test results and changes in conductivity and adhesion during environmental testing as technical documentation to support considerations for outdoor applications. ONE-HAND MIXING is a product that allows for the automatic mixing and dispensing of a two-component conductive epoxy adhesive with silver filler using a dedicated cartridge and mixer nozzle. - No measuring or mixing work is required, reducing variability in the mixing ratio by the operator. - It cures at room temperature, making it suitable for conductive connections around heat-sensitive resin parts, FPCs, LEDs, and sensors. - Conductive bonding is possible with materials that are difficult to solder, such as glass, resin, aluminum, and stainless steel, without using a soldering iron. - It retains flexibility after curing, making it usable for repairs and connections in areas subject to bending and vibration. *For detailed data, please refer to the TDS and special website.

  • Repair Agent
  • Solder
  • glue
  • glue

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Japanese-made, ready-to-ship conductive adhesive ONE-HAND MIXING

Japanese-made, ready-to-ship conductive adhesive ONE-HAND MIXING

For those struggling with long lead times for overseas products. With just a push, it automatically mixes two liquids, allowing for easy room-temperature connections where solder cannot be used.

We address issues such as unstable delivery times for overseas conductive adhesives, the need for refrigerated storage, and classification as hazardous materials. With domestic manufacturing and an immediate delivery system, we support urgent repairs and quick evaluations. We also offer bulk purchase discounts for corporations. *Consultation required. ONE-HAND MIXING is a product that allows for the automatic mixing and dispensing of a two-component conductive epoxy adhesive containing silver filler using a dedicated cartridge and mixer nozzle. - No weighing or mixing is required, reducing variability in the mixing ratio by the operator. - It cures at room temperature, making it suitable for conductive connections in heat-sensitive resin parts, FPCs, LEDs, and sensor areas. - Conductive bonding is possible with materials that are difficult to solder, such as glass, resin, aluminum, and stainless steel, without using a soldering iron. - It retains flexibility after curing, making it usable for repairs and connections in areas subject to bending and vibration. *For detailed data, please check the TDS and special website.

  • Repair Agent
  • Solder
  • glue
  • glue

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
One-handed usable room temperature curing conductive adhesive for automotive applications.

One-handed usable room temperature curing conductive adhesive for automotive applications.

No measuring or hand mixing required. Just press for easy connection at room temperature.

In the automotive industry, various sensors are installed to enhance vehicle safety and comfort. To ensure the accurate operation and reliability of these sensors, secure fastening of components and conductive connections are crucial. Particularly, when connecting heat-sensitive components or materials that are difficult to solder, selecting the appropriate adhesive is essential. ONE-HAND MIXING addresses these challenges and enables easy and reliable conductive connections at room temperature. 【Application Scenarios】 - Fixing heat-sensitive sensor components - Conductive connections to resin housings - Repairing areas subject to vibration or impact - Conductive bonding to aluminum or SUS materials 【Benefits of Implementation】 - Reduction of work time and increased efficiency - Minimization of mixing errors and variations by operators - Reduced risk of damage to components from heat - Improved capability to address areas where soldering is difficult - Durability against vibration and bending due to flexibility

  • Repair Agent
  • Solder
  • glue
  • glue

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
[For Maintenance] One-Handed Usable Room Temperature Curing Conductive Adhesive

[For Maintenance] One-Handed Usable Room Temperature Curing Conductive Adhesive

Ideal for emergency repairs. Easily achieve a conductive connection at room temperature with just a push.

In maintenance settings, quick and reliable recovery is required when equipment failures or damage occur. Particularly in repairs where electrical continuity is necessary, challenges may arise when soldering is difficult or when dealing with heat-sensitive components. In such situations, a solution that can establish a conductive connection at room temperature without using a soldering iron is essential. ONE-HAND MIXING is a product that meets these urgent needs. 【Usage Scenarios】 - Emergency repairs of conductive parts in malfunctioning electronic devices - Wiring repairs around heat-sensitive components - Situations requiring rapid continuity assurance on-site - Conductive connections to materials that are difficult to solder (glass, resin, aluminum, SUS, etc.) 【Benefits of Implementation】 - Supports rapid recovery operations in emergencies - Enables conductive connections even in difficult soldering areas - Reduces damage to components caused by heat - Alleviates the burden on workers and improves work efficiency

  • Repair Agent
  • Solder
  • glue
  • glue

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Single-handedly usable room temperature curing conductive adhesive for robotics.

Single-handedly usable room temperature curing conductive adhesive for robotics.

Room temperature curing conductive adhesive that requires no measuring or hand mixing for joint repair.

In the field of robotics joint repair, precise conductive connections and durability are required. In particular, addressing components that are sensitive to heat, complex shapes, and improving work efficiency are emphasized. Traditional repair methods can face challenges such as difficulties in soldering and variations due to the skill level of the workers. ONE-HAND MIXING addresses these issues with an automatic mixing and dispensing function that can be easily handled with one hand, achieving uniform quality conductive connections at room temperature. 【Usage Scenarios】 - Wiring repair of robot joints - Conductive connections around sensors - Application of conductive patches to movable parts - Conductive bonding to aluminum and resin components 【Benefits of Implementation】 - Enables conductive connections in areas where soldering is difficult - Stable quality that does not depend on the skill of the worker - Reduces the impact on heat-sensitive components - Flexibility to accommodate vibrations and bending

  • Repair Agent
  • Solder
  • glue
  • glue

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Robot-oriented room temperature curing conductive adhesive ONE-HAND MIXING

Robot-oriented room temperature curing conductive adhesive ONE-HAND MIXING

For reinforcing robot joints, easily achieve conductive connections at room temperature with just a push.

In reinforcing robot joints, durability of movable parts and electrical connectivity are required. Particularly in joint areas with complex structures, ensuring reliable fixation and conductivity is essential for maintaining the robot's performance. Improper fixation or poor conductivity can lead to joint damage or malfunction. ONE-HAND MIXING allows for automatic mixing of two liquids simply by pressing, without the need for measuring or manual mixing, easily achieving electrical connections at room temperature where soldering is not possible. 【Usage Scenarios】 - Reinforcement and fixation of robot joints - Electrical connections around sensors and actuators - Adhesion to metals, plastics, and composite materials 【Benefits of Implementation】 - Reduction of work time and minimization of variability by operators - Decreased impact on heat-sensitive components - Enables electrical connections in areas where soldering is difficult - Improved durability against vibration and bending due to flexibility after curing

  • Repair Agent
  • Solder
  • glue
  • glue

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Single-handedly usable room temperature curing conductive adhesive for medical devices.

Single-handedly usable room temperature curing conductive adhesive for medical devices.

For connecting medical device probes. No measurement or manual mixing required for room temperature conductive connection.

In the field of medical devices, there is a demand for reliable conductivity performance in precise probe connections while minimizing the impact on delicate components. Particularly, connections to heat-sensitive materials or components with complex shapes can make soldering difficult. In response to such challenges, our "One-Hand Mixing Room Temperature Curing Conductive Adhesive" eliminates the need for measuring and mixing tasks, ensuring reliable conductive connections at room temperature. 【Usage Scenarios】 - Conductive connections at the tips or connector parts of medical probes - Conductive repairs around heat-sensitive sensors and electronic components - Formation of conductive paths on delicate resin housings 【Benefits of Implementation】 - Simplification of tasks and reduction of variability in mixing ratios by operators - Reduced risk of damage to components from heat - Enables conductive connections to materials that are difficult to solder - Improved durability against vibration and bending due to flexibility after curing

  • Repair Agent
  • Solder
  • glue
  • glue

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Aerospace-grade one-handed use room temperature curing conductive adhesive.

Aerospace-grade one-handed use room temperature curing conductive adhesive.

For wiring fixation in the aerospace field. No measurement or manual mixing required for room temperature conductive connection.

In the aerospace field, precise wiring fixation is required, and high reliability and work efficiency are emphasized. In particular, it is essential to address materials that are sensitive to heat and complex shapes, as well as to ensure rapid work on-site. Traditional methods have faced challenges such as difficulties in soldering and the labor-intensive nature of weighing and mixing tasks. ONE-HAND MIXING addresses these issues by eliminating the need for weighing and manual mixing through an automatic mixing and dispensing function using a dedicated cartridge and mixer nozzle, thereby reducing variability in mixing ratios by the operator. Due to its room temperature curing, it is also suitable for conductive connections around heat-sensitive components, enabling conductive bonding of materials that are difficult to solder, such as glass, resin, aluminum, and stainless steel, without the use of a soldering iron. 【Application Scenarios】 - Precise wiring fixation inside and outside aircraft - Conductive connections around sensors and electronic components - Conductive bonding to heat-sensitive materials - Repair and connection of areas subjected to vibration or bending 【Benefits of Implementation】 - Reduction and efficiency of work time - Achieving conductive connections with uniform quality - Improved capability to address areas where soldering is difficult - Reduced impact on components due to heat

  • Repair Agent
  • Solder
  • glue
  • glue

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
One-Hand Mixing Room Temperature Curing Conductive Adhesive for Automotive Use

One-Hand Mixing Room Temperature Curing Conductive Adhesive for Automotive Use

No measuring or manual mixing required. Just press for easy connection at room temperature.

In the automotive industry, reliable fixation and ensuring conductivity of sensors that support vehicle safety and functionality are required. In particular, for sensor components that are sensitive to heat or areas that experience vibration and shock, soldering can be difficult, and there are concerns about the impact of heat on the components. Improper fixation or poor conductivity can lead to sensor malfunctions or failures. ONE-HAND MIXING allows for the automatic mixing and dispensing of two components using a dedicated cartridge and mixer nozzle, enabling quick and reliable conductive connections at room temperature without the hassle of measuring or manual mixing. 【Application Scenarios】 - Fixation and ensuring conductivity of heat-sensitive sensor components - Sensor connections in areas subject to vibration or shock - Conductive bonding to materials that are difficult to solder, such as glass, resin, aluminum, and stainless steel - Work around sensors in tight spaces 【Benefits of Implementation】 - Reduction in work time and improvement in work efficiency - Stabilization of quality by suppressing variations in mixing ratios by workers - Reduction of impact on heat-sensitive components - Enabling conductive connections to materials that are difficult to solder - Response to vibrations due to flexibility after curing

  • Repair Agent
  • Solder
  • glue
  • glue

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Audio-use single-handedly usable room temperature curing conductive adhesive

Audio-use single-handedly usable room temperature curing conductive adhesive

Room temperature curing conductive adhesive that does not require measuring or hand mixing for speaker repair.

In the repair of audio equipment, a reliable connection in the conductive parts related to sound quality is essential. Particularly in the wiring and internal connections of speaker units, there may be materials that are difficult to solder and components that are sensitive to heat. Improper connections can lead to deterioration in sound quality or disconnections. ONE-HAND MIXING allows for the automatic mixing of two liquids with a dedicated cartridge and mixer nozzle while dispensing, eliminating the need for measuring and mixing tasks, reducing variability in the mixing ratio by the operator, and achieving stable conductive connections. 【Usage Scenarios】 - Conductive repair of disconnection points in speaker units - Internal wiring connections for tweeters and woofers - Conductive repair of amplifiers and network circuit boards - Conductive connections to metal terminals and resin components that are difficult to solder 【Benefits of Implementation】 - No soldering iron required, enabling safe and easy conductive connections - Safe for use on heat-sensitive components due to room temperature curing - Maintains flexibility after curing, reducing disconnections caused by vibrations - Stable conductive performance reduces sound quality deterioration

  • Repair Agent
  • Solder
  • glue
  • glue

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Single-handedly usable room temperature curing conductive adhesive for lighting applications.

Single-handedly usable room temperature curing conductive adhesive for lighting applications.

Simply press to easily connect the LED at room temperature. No weighing or manual mixing required.

In the lighting industry, stable conductive connections for LEDs are directly linked to product quality and lifespan. Particularly, when connecting heat-sensitive LED components or surrounding substrates, soldering at high temperatures can be challenging. Additionally, precise adhesion work for fine components requires skilled techniques and uniform material supply. ONE-HAND MIXING addresses these challenges by providing automatic mixing and dispensing functions with dedicated cartridges and mixer nozzles, enabling reliable conductive connections at room temperature without the hassle of weighing and manual mixing. 【Application Scenes】 - Conductive adhesion of LED chips to substrates - Fixing heat-sensitive resin LED components - Conductive connections around sensors - Conductive adhesion to materials like glass and aluminum, where soldering is difficult 【Benefits of Implementation】 - Reduction of work time and increased efficiency - Stabilization of quality by minimizing variations in mixing ratios by operators - Reduced risk of damage to components due to heat - Enabling conductive connections in areas where soldering is difficult - Improved durability against vibration and bending due to flexibility after curing

  • Repair Agent
  • Solder
  • glue
  • glue

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
[For the telecommunications industry] One-handed usable room temperature curing conductive adhesive

[For the telecommunications industry] One-handed usable room temperature curing conductive adhesive

For adjusting antennas of communication equipment, no measurement or manual mixing is required for room temperature conductive connections.

In the telecommunications industry, precise adjustment of antennas and stable conductive connections are essential for maintaining communication quality. Particularly in the case of delicate components or on-site work, soldering can be challenging, and dealing with heat-sensitive materials presents difficulties. Improper connections can lead to communication failures or performance degradation. ONE-HAND MIXING allows for the automatic mixing and dispensing of two liquids using a dedicated cartridge and mixer nozzle, eliminating the need for measuring and mixing tasks, reducing variability in the mixing ratio by the operator, and achieving stable conductive connections. 【Usage Scenarios】 - Conductive connections for antenna components - Repair and maintenance of delicate communication equipment - Rapid conductive connection work on-site 【Benefits of Implementation】 - Enables conductive connections for materials that are difficult to solder - Applicable to heat-sensitive components - Improved work efficiency and stabilization of quality

  • Repair Agent
  • Solder
  • glue
  • glue

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
One-Hand Mixing Conductive Adhesive for Communication Equipment - Room Temperature Curing

One-Hand Mixing Conductive Adhesive for Communication Equipment - Room Temperature Curing

For bonding antennas of communication devices. Simply press for a conductive connection at room temperature.

In the telecommunications equipment industry, particularly in antenna bonding, reliable conductive connections of fine components are essential. The performance of antennas is greatly influenced by the electrical characteristics of the connection points, making the assurance of stable conductive performance indispensable. Traditional methods often face challenges when dealing with materials that are difficult to solder or components that are sensitive to heat. ONE-HAND MIXING offers a solution to these challenges by allowing for automatic mixing of two components simply by pushing, without the need for measuring or manual mixing, enabling conductive connections at room temperature. 【Application Scenarios】 - Conductive connections for telecommunications equipment antennas - Bonding of heat-sensitive resin components - Conductive bonding to dissimilar materials such as glass, aluminum, and stainless steel - Repairing areas subjected to bending or vibration 【Benefits of Implementation】 - Simplification of work processes and reduction of variability by operators - Decreased risk of damage to heat-sensitive components - Improved capability to handle materials that are difficult to solder - Durable connections that leverage flexibility

  • Repair Agent
  • Solder
  • glue
  • glue

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

glueに関連する検索キーワード

イプロス 関連サービス
COPYRIGHT © 2001-2026 IPROS CORPORATION ALL RIGHTS RESERVED.