We have compiled a list of manufacturers, distributors, product information, reference prices, and rankings for glue.
ipros is IPROS GMS ・ IPROS One of the largest technical database sites in Japan that collects information on.

glue(hand) - List of Manufacturers, Suppliers, Companies and Products | IPROS GMS

Last Updated： Aggregation Period:Jul 22, 2026～Aug 18, 2026
This ranking is based on the number of page views on our site.

glue Product List

1～30 item / All 75 items

Displayed results
Room-temperature curing two-part conductive epoxy adhesive with automatic mixing — ONE-HAND MIXING

Room-temperature curing two-part conductive epoxy adhesive with automatic mixing — ONE-HAND MIXING

No weighing, measuring or manual mixing. Just push to dispense a two-part conductive adhesive—ideal for room-temperature electrical bonding where soldering is difficult.

ONE-HAND MIXING is a two-part conductive epoxy adhesive filled with silver filler. A dedicated cartridge and static mixer nozzle automatically mix the two components as you dispense. ○ No weighing, measuring or manual mixing is required, helping reduce variation in the mixing ratio between operators. ○ Because it cures at room temperature, it is suitable for electrical bonding around heat-sensitive plastic parts, FPCs, LEDs and sensors. ○ It enables conductive bonding without a soldering iron, even on materials that are difficult to solder, such as glass, plastics, aluminum and stainless steel. ○ After curing, it retains flexibility, making it useful for repair or bonding in areas subject to bending or vibration. * For detailed data, please refer to the TDS and special website.

  • Repair Agent
  • Solder
  • glue
  • glue

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Halogen Free Adhesive

Halogen Free Adhesive

Compliant with the halogen-free standards IEC, IPC, and JPCA of various international organizations.

We deliver NIC BOND products that comply with halogen-free standards, which started as part of our environmental initiatives in 2007, along with data guarantees. These products are suitable for a wide range of applications, including module assembly and the adhesion of electronic components. Our NIC BOND meets Halogen Free Standards of IEC, IPC, and JPCA. We provide data on halogen. For direct inquiries to Nichimoly HP, please copy and paste the following link into your Google: https://www.daizo.co.jp/nichimoly/contact_form.html

  • Other electronic parts
  • Other semiconductors
  • Other optical parts
  • glue

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Aluminum casing conductive connection ONE-HAND MIXING

Aluminum casing conductive connection ONE-HAND MIXING

For grounding/GND connection to aluminum bodies. Automatically mixes two liquids with just a push, allowing for easy conductive connections at room temperature without the need for solder.

For those considering conductive connections to aluminum enclosures, aluminum bodies, and metal components: ONE-HAND MIXING offers an option for grounding and GND connections through application, even in areas where screwing or welding is difficult. ONE-HAND MIXING is a product that allows for the automatic mixing and dispensing of a two-component conductive epoxy adhesive with silver filler using a dedicated cartridge and mixer nozzle. - No weighing or mixing work is required, reducing variability in the mixing ratio by the operator. - It cures at room temperature, making it suitable for conductive connections around heat-sensitive resin parts, FPCs, LEDs, and sensors. - Conductive bonding is possible without using a soldering iron, even with materials that are difficult to solder, such as glass, resin, aluminum, and stainless steel. - It retains flexibility after curing, allowing for repairs and connections in areas subject to bending and vibration. *For detailed data, please check the TDS and the special website.

  • Repair Agent
  • Solder
  • glue
  • glue

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
No-screw ground connection ONE-HAND MIXING

No-screw ground connection ONE-HAND MIXING

When you want to establish a connection without using screws or terminals. Just press to automatically mix the two liquids, allowing for easy room temperature connections without solder.

For grounding connections where there is no space for screws, nuts, or crimp terminals, or where you want to reduce processes, ONE-HAND MIXING utilizes conductivity and adhesion to achieve easy electrical bonding to housings and components. ONE-HAND MIXING is a product that allows for the automatic mixing and dispensing of a two-component conductive epoxy adhesive with silver fillers using a dedicated cartridge and mixer nozzle. - No weighing or mixing work is required, which suppresses variations in the mixing ratio by the operator. - It cures at room temperature, making it suitable for conductive connections around heat-sensitive resin parts, FPCs, LEDs, and sensors. - Conductive bonding is possible without using a soldering iron, even with materials that are difficult to solder, such as glass, resin, aluminum, and stainless steel. - It retains flexibility after curing, making it usable for repairs and connections in areas subjected to bending and vibration. *For detailed data, please check the TDS and special website.

  • Repair Agent
  • Solder
  • glue
  • glue

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Field repair of poor connectivity ONE-HAND MIXING

Field repair of poor connectivity ONE-HAND MIXING

For repair work on connections, wiring, and patterns. Just press to automatically mix the two components, allowing for easy cold connections without the use of solder.

For continuity repairs on-site, such as poor contact, broken wiring, or missing circuit board patterns. ONE-HAND MIXING is suitable for small area repairs in prototyping, evaluation, and maintenance because it allows for quick use of the necessary amount. ONE-HAND MIXING is a product that automatically mixes and dispenses a two-component conductive epoxy adhesive with silver filler using a dedicated cartridge and mixer nozzle. - No weighing or mixing is required, which reduces variability in the mixing ratio by the operator. - It cures at room temperature, making it suitable for conductive connections around heat-sensitive resin parts, FPCs, LEDs, and sensors. - It enables conductive bonding to materials that are difficult to solder, such as glass, resin, aluminum, and stainless steel, without using a soldering iron. - It retains flexibility after curing, allowing it to be used for repairs and connections in areas subject to bending and vibration. *For detailed data, please check the TDS and special website.

  • Repair Agent
  • Solder
  • glue
  • glue

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
One-hand mixing for alternative conductive connection to rivets.

One-hand mixing for alternative conductive connection to rivets.

For connections with a structure that is difficult to rivet or crimp. Automatically mixes two liquids just by pressing, allowing for easy room-temperature conductive connections without the use of solder.

For conductive connections in structures where rivets, crimp terminals, and screws are difficult to use, ONE-HAND MIXING supports component design that requires miniaturization and space-saving by combining adhesive fixation through application and conductivity. ONE-HAND MIXING is a product that can automatically mix and dispense a two-component conductive epoxy adhesive with silver filler using a dedicated cartridge and mixer nozzle. - No need for measuring and mixing, which reduces variability in the mixing ratio by the operator. - Cures at room temperature, making it suitable for conductive connections around heat-sensitive resin parts, FPCs, LEDs, and sensors. - Enables conductive adhesion to materials that are difficult to solder, such as glass, resin, aluminum, and stainless steel, without using a soldering iron. - Retains flexibility after curing, allowing it to be used for repairs and connections in areas subject to bending and vibration. *For detailed data, please check the TDS and the special website.

  • Repair Agent
  • Solder
  • glue
  • glue

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Sensor electrode connection ONE-HAND MIXING

Sensor electrode connection ONE-HAND MIXING

Electrodes and lead wires are fixed for conductivity at low temperatures. Just press to automatically mix the two liquids, allowing for easy conductive connections at room temperature without the use of solder.

For conductive connections such as sensor electrodes, lead wires, and thin film electrodes. Even delicate components that are difficult to apply heat or pressure to can achieve both conductivity and fixation simultaneously by applying and curing ONE-HAND MIXING. ONE-HAND MIXING is a product that allows for the automatic mixing and dispensing of a two-component conductive epoxy adhesive with silver filler using a dedicated cartridge and mixer nozzle. - No weighing or mixing work is required, which suppresses variations in the mixing ratio by the operator. - It cures at room temperature, making it suitable for conductive connections around heat-sensitive resin parts, FPCs, LEDs, and sensors. - Conductive adhesion is possible for materials that are difficult to solder, such as glass, resin, aluminum, and stainless steel, without using a soldering iron. - It retains flexibility even after curing, making it usable for repairs and connections in areas subject to bending and vibration. *For detailed data, please check the TDS and special website.

  • Repair Agent
  • Solder
  • glue
  • glue

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
One-hand mixing for conductive connections around resin parts.

One-hand mixing for conductive connections around resin parts.

For connecting and repairing heat-sensitive resin substrates. Automatically mixes two components just by pressing, allowing for easy room temperature conductive connections without the use of solder.

When you want to make a conductive connection near resin housings or resin substrates while avoiding solder heat. ONE-HAND MIXING is a user-friendly conductive adhesive that can be used at low temperatures, making it useful for the design and repair around resin parts. ONE-HAND MIXING is a product that allows for the automatic mixing and dispensing of a two-component conductive epoxy adhesive with silver filler using a dedicated cartridge and mixer nozzle. - No weighing or mixing is required, reducing variability in the mixing ratio by the operator. - It cures at room temperature, making it suitable for conductive connections around heat-sensitive resin parts, FPCs, LEDs, and sensors. - Conductive bonding is possible without using a soldering iron, even on materials that are difficult to solder, such as glass, resin, aluminum, and stainless steel. - It retains flexibility after curing, making it usable for repairs and connections in areas subject to bending and vibration. *For detailed data, please check the TDS and the special website.

  • Repair Agent
  • Solder
  • glue
  • glue

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Super Flexible Epoxy Adhesive Premium Flexible

Super Flexible Epoxy Adhesive Premium Flexible

While maintaining the high reliability characteristic of epoxy resin, it achieves rubber-like elasticity and stretch.

NB9000 Series for IPX Level 7 Standard An epoxy resin adhesive that demonstrates rubber elasticity and achieves rubber extensibility (200%). It exhibits the high reliability characteristic of epoxy resin, shows better heat resistance than rubber (silicone, urethane), and performs sufficiently even at extremely low temperatures. It also meets the waterproof standard of IPX Level 7. Flexibility, Elasticity, Extend like Rubber with higher performance Silicon Rubber. Premium Elasticity Epoxy Adhesive. NB9000 Series passed IPX Level 7 Standard. Direct contact information for Nichimoly HP If you need to contact directly, please copy and paste to your Google: https://www.daizo.co.jp/nichimoly/contact_form.html

  • Rectangular Connector
  • Rectangular Connector
  • Automotive Connectors
  • glue

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
One-Hand Mixing for Conductive Repair of Flexible PCBs

One-Hand Mixing for Conductive Repair of Flexible PCBs

For repairing conductivity in thin substrates and narrow areas. No measuring or hand mixing required. Just press to automatically mix the two components, allowing for easy conductivity connections at room temperature without the use of solder.

For the repair of conductive connections in components that are difficult to apply heat or mechanical stress, such as FPCs and thin film substrates. ONE-HAND MIXING is easy to apply to targeted areas and is suitable for repair applications around flexible printed circuit boards where soldering is challenging. ONE-HAND MIXING is a product that allows for the automatic mixing and dispensing of a two-component conductive epoxy adhesive with silver filler using a dedicated cartridge and mixer nozzle. - No weighing or mixing work is required, reducing variability in the mixing ratio by the operator. - It cures at room temperature, making it suitable for conductive connections around heat-sensitive resin parts, FPCs, LEDs, and sensors. - Conductive adhesion is possible without using a soldering iron, even on materials that are difficult to solder, such as glass, resin, aluminum, and stainless steel. - It retains flexibility after curing, making it usable for repairs and connections in areas subject to bending and vibration. *For detailed data, please check the TDS and the special website.

  • Repair Agent
  • Solder
  • glue
  • glue

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Wire and lead wire continuity fixation ONE-HAND MIXING

Wire and lead wire continuity fixation ONE-HAND MIXING

Fix thin wires with conductive adhesive. No weighing or hand mixing required. Just press to automatically mix the two components, making it easy to create conductive connections at room temperature without solder.

For applications where you want to secure the continuity of fine wires and lead wires without using solder or crimp terminals. ONE-HAND MIXING can be applied to the necessary areas to achieve both adhesion and conductivity, making it effective for connections around sensor electrodes and small components. ONE-HAND MIXING is a product that allows for the automatic mixing and dispensing of a two-component conductive epoxy adhesive with silver filler using a dedicated cartridge and mixer nozzle. - No weighing or mixing work is required, reducing variability in the mixing ratio by the operator. - It cures at room temperature, making it suitable for conductive connections around heat-sensitive resin parts, FPC, LEDs, and sensors. - It enables conductive adhesion to materials that are difficult to solder, such as glass, resin, aluminum, and stainless steel, without using a soldering iron. - It retains flexibility even after curing, allowing for repairs and connections in areas subject to bending and vibration. *For detailed data, please check the TDS and the special website.

  • Repair Agent
  • Solder
  • glue
  • glue

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Solder-free connection ONE-HAND MIXING

Solder-free connection ONE-HAND MIXING

Components that are sensitive to heat can be connected at low temperatures. No weighing or manual mixing is required. Simply pressing a button automatically mixes the two liquids, allowing for easy connections at room temperature without the use of solder.

For electrical components, resin parts, flexible substrates, and other conductive connections that want to avoid solder heat. ONE-HAND MIXING can be utilized for conductive fixing and repair with reduced heating processes by applying and curing the necessary amount. ONE-HAND MIXING is a product that allows for the automatic mixing and dispensing of a two-component conductive epoxy adhesive with silver filler using a dedicated cartridge and mixer nozzle. - No weighing or mixing work is required, which suppresses variations in the mixing ratio by the operator. - It cures at room temperature, making it suitable for conductive connections around heat-sensitive resin parts, FPC, LEDs, and sensors. - Conductive adhesion is possible without using a soldering iron, even on materials that are difficult to solder, such as glass, resin, aluminum, and stainless steel. - It retains flexibility after curing, making it usable for repairs and connections in areas subjected to bending and vibration. *For detailed data, please check the TDS and special website.

  • Repair Agent
  • Solder
  • glue
  • glue

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Conductive connection of components used in low-temperature environments ONE-HAND MIXING

Conductive connection of components used in low-temperature environments ONE-HAND MIXING

For conductive connections in cold environments and low-temperature equipment. Automatically mixes two liquids with just a push, allowing for easy conductive connections at room temperature without the use of solder.

For the conductive connections of components used in low-temperature environments, such as refrigeration and freezing equipment or devices used in cold regions. ONE-HAND MIXING maintains an adhesive strength of about 70% or more even in extreme low temperatures (−196℃) during rapid cooling and heating tests, making it a candidate for evaluating connection reliability in low-temperature environments. ONE-HAND MIXING is a product that allows for the automatic mixing and dispensing of a two-component conductive epoxy adhesive with silver filler using a dedicated cartridge and mixer nozzle. - No weighing or mixing work is required, reducing variability in the mixing ratio by the operator. - It cures at room temperature, making it suitable for conductive connections around heat-sensitive resin parts, FPCs, LEDs, and sensors. - It enables conductive adhesion to materials that are difficult to solder, such as glass, resin, aluminum, and stainless steel, without the use of a soldering iron. - It retains flexibility even after curing, making it usable for repairs and connections in areas subject to bending and vibration. * For detailed data, please check the TDS and special website.

  • Repair Agent
  • Solder
  • glue
  • glue

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
No worry about burns with the conductive connection ONE-HAND MIXING

No worry about burns with the conductive connection ONE-HAND MIXING

No soldering iron required. Eliminate high-temperature work. Automatically mix two liquids with just a push, allowing for easy connections at room temperature without soldering.

For sites and educational purposes that want to avoid the risks of burns and component charring from high-temperature soldering iron work. ONE-HAND MIXING is a room-temperature curing type that does not require a heat source, allowing for application with a single-handed push, enabling safe electrical connections of wires and components. ONE-HAND MIXING is a product that automatically mixes and dispenses a two-component conductive epoxy adhesive with silver filler using a dedicated cartridge and mixer nozzle. - No weighing or mixing work is required, reducing variability in the mixing ratio by the operator. - It cures at room temperature, making it suitable for electrical connections around heat-sensitive resin components, FPCs, LEDs, and sensors. - Conductive bonding is possible without using a soldering iron, even on materials that are difficult to solder, such as glass, resin, aluminum, and stainless steel. - It retains flexibility after curing, making it usable for repairs and connections in areas subject to bending and vibration. *For detailed data, please check the TDS and special website.

  • Repair Agent
  • Solder
  • glue
  • glue

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Low-resistance connection approaching solder ONE-HAND MIXING

Low-resistance connection approaching solder ONE-HAND MIXING

Conductive adhesive with a volume resistivity of around 10⁻⁴ Ω·cm. Automatically mixes the two components just by pressing, allowing for easy electrical connections at room temperature without the need for soldering.

For applications where you want to minimize connection resistance even with conductive adhesives. ONE-HAND MIXING achieves a volume resistivity of 2×10⁻⁴Ω·cm at room temperature curing stability, approaching the conductivity of solder. It is suitable for conductive connections and repairs where low resistance is required. ONE-HAND MIXING is a product that allows for the automatic mixing and dispensing of a two-component conductive epoxy adhesive with silver filler using a dedicated cartridge and mixer nozzle. - No weighing or mixing work is required, reducing variability in the mixing ratio by the operator. - It cures at room temperature, making it suitable for conductive connections around heat-sensitive resin parts, FPCs, LEDs, and sensors. - Conductive bonding is possible without using a soldering iron, even on materials that are difficult to solder, such as glass, resin, aluminum, and SUS. - It retains flexibility after curing, making it usable for repairs and connections in areas subject to bending and vibration. *For detailed data, please check the TDS and special website.

  • Repair Agent
  • Solder
  • glue
  • glue

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Adhesive for Hard Disk Drives

Adhesive for Hard Disk Drives

It demonstrates high reliability in the assembly of hard disk drives.

This is an adhesive with a long track record in hard disk drive assembly. Characteristics: Low outgassing, low-temperature curing, oil-resistant, halogen-free. NIC BOND (part number): NB3040 (two-component), NB3041B (one-component) Syringe, TNB-6322HF. High Quality High Performance for HDD Drive Assembly. Characteristic: Halogen Free, Low Out Gas, Low Temp Cure, Oil Resistant. For direct inquiries to Nichimoly HP, if you need to contact directly, please copy and paste to your Google: https://www.daizo.co.jp/nichimoly/contact_form.html.

  • NB1001(1).jpg
  • Other motors
  • Optical Connector
  • Other electronic parts
  • glue

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
【For Home Appliances】Room Temperature Curing Conductive Adhesive ONE-HAND MIXING

【For Home Appliances】Room Temperature Curing Conductive Adhesive ONE-HAND MIXING

No measuring or hand mixing required. Simply press for easy electrical connection at room temperature.

In the repair of circuit boards for home appliances, precise conductive connections are required. Particularly in cases where the circuit board has heat-sensitive components or complex wiring, soldering can often be difficult. Improper connections can lead to product malfunctions or reduced lifespan. ONE-HAND MIXING allows for the automatic mixing and dispensing of two components using a dedicated cartridge and mixer nozzle, eliminating the need for measuring and mixing tasks, reducing variability in the mixing ratio by the operator, and achieving stable conductive connections. 【Usage Scenarios】 - Conductive connections for heat-sensitive resin components, FPCs, LEDs, and sensors - Conductive bonding to materials that are difficult to solder, such as glass, resin, aluminum, and stainless steel - Repairing or connecting areas subjected to bending or vibration 【Benefits of Implementation】 - Enables safe and easy conductive connections without the need for a soldering iron - Cures at room temperature, minimizing damage to components from heat - Maintains flexibility after curing, providing strong connections resistant to vibration and bending

  • Repair Agent
  • Solder
  • glue
  • glue

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Robot-oriented room temperature curing conductive adhesive ONE-HAND MIXING

Robot-oriented room temperature curing conductive adhesive ONE-HAND MIXING

For reinforcing robot joints, easily achieve conductive connections at room temperature with just a push.

In reinforcing robot joints, durability of movable parts and electrical connectivity are required. Particularly in joint areas with complex structures, ensuring reliable fixation and conductivity is essential for maintaining the robot's performance. Improper fixation or poor conductivity can lead to joint damage or malfunction. ONE-HAND MIXING allows for automatic mixing of two liquids simply by pressing, without the need for measuring or manual mixing, easily achieving electrical connections at room temperature where soldering is not possible. 【Usage Scenarios】 - Reinforcement and fixation of robot joints - Electrical connections around sensors and actuators - Adhesion to metals, plastics, and composite materials 【Benefits of Implementation】 - Reduction of work time and minimization of variability by operators - Decreased impact on heat-sensitive components - Enables electrical connections in areas where soldering is difficult - Improved durability against vibration and bending due to flexibility after curing

  • Repair Agent
  • Solder
  • glue
  • glue

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Semiconductor-grade room temperature curing conductive adhesive ONE-HAND MIXING

Semiconductor-grade room temperature curing conductive adhesive ONE-HAND MIXING

No measuring or hand mixing required. Simply press for easy electrical connection at room temperature.

In the semiconductor industry, reliable conductive connections are required for precise chip fixation. Particularly, when mounting heat-sensitive components or on complex-shaped substrates, soldering can be difficult. The use of inappropriate adhesives or inaccurate mixing ratios can lead to poor connections and reduced product performance. ONE-HAND MIXING allows for the automatic mixing and dispensing of two components using a dedicated cartridge and mixer nozzle, eliminating the need for weighing and mixing tasks, reducing variability in the mixing ratio by the operator, and achieving stable conductive connections. 【Application Scenarios】 - Conductive connections for heat-sensitive resin components, FPCs, LEDs, and sensors - Conductive bonding to materials that are difficult to solder, such as glass, resin, aluminum, and SUS - Repairing or connecting areas subject to bending or vibration 【Benefits of Implementation】 - Reduction in work time and labor - Conductive connections with uniform quality - Compatibility with materials that are difficult to solder

  • Repair Agent
  • Solder
  • glue
  • glue

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Ground connection to metal housing ONE-HAND MIXING

Ground connection to metal housing ONE-HAND MIXING

For ground connections without screws or bolts. Automatically mixes two liquids with just a push, allowing for easy conductive connections at room temperature without the use of solder.

When you want to connect GND or earth to metal enclosures or plated parts. Even in structures where screw fastening or riveting is difficult, conductive adhesive connections enhance the design flexibility for enclosure grounding and shield connections. ONE-HAND MIXING is a product that allows for automatic mixing and dispensing of a two-component conductive epoxy adhesive with silver filler using a dedicated cartridge and mixer nozzle. - No need for weighing or mixing operations, which suppresses variations in the mixing ratio by the operator. - Cures at room temperature, making it suitable for conductive connections around heat-sensitive resin parts, FPCs, LEDs, and sensors. - Enables conductive adhesion to materials that are difficult to solder, such as glass, resin, aluminum, and stainless steel, without using a soldering iron. - Maintains flexibility after curing, making it usable for repairs and connections in areas subjected to bending and vibration. * For detailed data, please check the TDS and the special website.

  • Repair Agent
  • Solder
  • glue
  • glue

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Alternative connection to spot welding ONE-HAND MIXING

Alternative connection to spot welding ONE-HAND MIXING

For conductive connections that cannot be welded. Automatically mixes two liquids with just a push, allowing for easy conductive connections at room temperature without the use of solder.

For the conductive connection of components where spot welding and soldering are to be avoided. This method can be considered for structures where heat impact needs to be minimized, and during the prototype stage where equipment installation is difficult, using conductive adhesives. ONE-HAND MIXING is a product that allows for the automatic mixing and dispensing of a two-component conductive epoxy adhesive with silver filler using a dedicated cartridge and mixer nozzle. - No measuring or mixing work is required, reducing variability in the mixing ratio by the operator. - It cures at room temperature, making it suitable for conductive connections of heat-sensitive resin parts, FPCs, LEDs, and sensors. - Conductive adhesion is possible without using a soldering iron, even on materials that are difficult to solder, such as glass, resin, aluminum, and stainless steel. - It maintains flexibility after curing, allowing it to be used for repairs and connections in areas subjected to bending and vibration. *For detailed data, please check the TDS and special website.

  • Repair Agent
  • Solder
  • glue
  • glue

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
EMI shielded conductive connection ONE-HAND MIXING

EMI shielded conductive connection ONE-HAND MIXING

For connecting the shield material and the chassis ground. Automatically mixes two liquids with just a push, allowing for easy conductive connections at room temperature without the use of solder.

For conductive connections between EMI shielding materials, metal enclosures, and grounds. Even in areas where screw fastening or soldering is difficult, using conductive adhesive allows for space-saving shield and ground connections. ONE-HAND MIXING is a product that allows for the automatic mixing and dispensing of a two-component conductive epoxy adhesive with silver filler using a dedicated cartridge and mixer nozzle. - No need for measuring or mixing, reducing variability in the mixing ratio by the operator. - Cures at room temperature, making it suitable for conductive connections around heat-sensitive resin parts, FPCs, LEDs, and sensors. - Enables conductive bonding to materials that are difficult to solder, such as glass, resin, aluminum, and stainless steel, without the use of a soldering iron. - Maintains flexibility after curing, making it usable for repairs and connections in areas subject to bending and vibration. *For detailed data, please check the TDS and special website.

  • Repair Agent
  • Solder
  • glue
  • glue

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Defroster tab adhesive repair ONE-HAND MIXING

Defroster tab adhesive repair ONE-HAND MIXING

Restores terminal and tab disconnections with continuity. Automatically mixes two liquids with just a push, allowing for easy cold connections where solder cannot be used.

For repairs around terminals that cannot withstand heat or mechanical stress, such as the defroster tab of the rear window, we support urgent repairs and short delivery times with high adhesive strength and conductivity, made in Japan and available for immediate delivery. ONE-HAND MIXING is a product that allows for the automatic mixing and dispensing of a two-component conductive epoxy adhesive with silver filler using a dedicated cartridge and mixer nozzle. - No weighing or mixing is required, reducing variability in the mixing ratio by the operator. - It cures at room temperature, making it suitable for conductive connections around heat-sensitive resin parts, FPCs, LEDs, and sensors. - Conductive bonding is possible without using a soldering iron, even with materials that are difficult to solder, such as glass, resin, aluminum, and stainless steel. - It retains flexibility after curing, making it usable for repairs and connections in areas subjected to bending and vibration. *For detailed data, please check the TDS and the special website.

  • Repair Agent
  • Solder
  • glue
  • glue

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Heat Resistance Grade

Heat Resistance Grade

It is ideal for high temperature and heat-resistant applications.

- Suitable for various applications in high-temperature environments. For Any High Temp Operating Devices. High Tg, Low Out Gas, Reflow Resistant, Environmental Resistance Uniq Characters: High Tg, Low absorption, Low Outgas, Reflow Resistant Direct contact information for Nichimoly HP If you need to contact directly, please copy and paste to your Google: https://www.daizo.co.jp/nichimoly/contact_form.html

  • Pack-4.JPG
  • Other electronic parts
  • Other Auto Parts
  • Other motors
  • glue

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Circuit pattern disconnection repair ONE-HAND MIXING

Circuit pattern disconnection repair ONE-HAND MIXING

For simple repairs of poor connections and pattern breaks. No measuring or hand mixing required. Just press to automatically mix the two components, allowing for easy connections at room temperature without solder.

ONE-HAND MIXING is a product that allows for the automatic mixing and dispensing of a two-component conductive epoxy adhesive with silver filler using a dedicated cartridge and mixer nozzle. - No measuring or mixing work is required, reducing variability in the mixing ratio by the operator. - It cures at room temperature, making it suitable for conductive connections around heat-sensitive resin parts, FPCs, LEDs, and sensors. - It enables conductive bonding to materials that are difficult to solder, such as glass, resin, aluminum, and SUS, without the use of a soldering iron. - It retains flexibility after curing, making it usable for repairs and connections in areas subject to bending and vibration. *For detailed data, please check the TDS and the special website.

  • Repair Agent
  • Solder
  • glue
  • glue

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Narrow section connection ONE-HAND MIXING

Narrow section connection ONE-HAND MIXING

For connections in hard-to-reach places where tools are difficult to use. No measuring or hand mixing required. Simply press to automatically mix the two components, allowing for easy connections at room temperature without the need for solder.

For difficult-to-reach areas where soldering irons, screws, and crimping tools are hard to use, you can consider conductive bonding through application in narrow spaces such as fine wires, around connectors, and inside enclosures, where the working space is limited. ONE-HAND MIXING is a product that allows you to automatically mix and dispense a two-component conductive epoxy adhesive with silver filler using a dedicated cartridge and mixer nozzle. - No weighing or mixing is required, which helps to minimize variations in the mixing ratio by the operator. - It cures at room temperature, making it suitable for conductive connections around heat-sensitive resin parts, FPCs, LEDs, and sensors. - Conductive bonding is possible without using a soldering iron, even on materials that are difficult to solder, such as glass, resin, aluminum, and stainless steel. - It retains flexibility after curing, making it usable for repairs and connections in areas subject to bending and vibration. * For detailed data, please check the TDS and the special website.

  • Repair Agent
  • Solder
  • glue
  • glue

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Conductive connection of plated parts ONE-HAND MIXING

Conductive connection of plated parts ONE-HAND MIXING

For achieving conductivity in plated housings and metal parts. Automatically mixes two components with just a push, allowing for easy conductivity connections at room temperature without the use of solder.

For plated housings and metal parts, it can be difficult to achieve conductive connections through soldering or screwing. By applying and curing conductive adhesive, it can be utilized for fixing ground wires, GND connections, and achieving conductivity in shielding materials. ONE-HAND MIXING is a product that allows for the automatic mixing and dispensing of a two-component conductive epoxy adhesive with silver filler using a dedicated cartridge and mixer nozzle. - No weighing or mixing work is required, reducing variability in the mixing ratio by the operator. - It cures at room temperature, making it suitable for conductive connections in heat-sensitive resin parts, FPCs, LEDs, and around sensors. - Conductive adhesion is possible without using a soldering iron, even on materials that are difficult to solder, such as glass, resin, aluminum, and stainless steel. - It retains flexibility after curing, making it usable for repairs and connections in areas subject to bending and vibration. *For detailed data, please check the TDS and the special website.

  • Repair Agent
  • Solder
  • glue
  • glue

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Battery tab connection ONE-HAND MIXING

Battery tab connection ONE-HAND MIXING

For connections around batteries that want to avoid heat. Just press to automatically mix the two liquids, allowing for easy conductive connections at room temperature without the need for soldering.

For conductive connections in areas where heat is difficult to apply, such as battery tabs and surrounding components. It expands the options for connection methods as a low-temperature and room-temperature curing conductive adhesive in situations where soldering or welding is difficult. ONE-HAND MIXING is a product that allows for automatic mixing and dispensing of a two-component conductive epoxy adhesive with silver filler using a dedicated cartridge and mixer nozzle. - No weighing or mixing work is required, reducing variability in the mixing ratio by the operator. - It cures at room temperature, making it suitable for conductive connections around heat-sensitive resin components, FPCs, LEDs, and sensors. - Conductive adhesion is possible without using a soldering iron, even on materials that are difficult to solder, such as glass, resin, aluminum, and stainless steel. - It retains flexibility after curing, making it usable for repairs and connections in areas subject to bending and vibration. *For detailed data, please check the TDS and special website.

  • Repair Agent
  • Solder
  • glue
  • glue

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Safe wiring connection without heat source ONE-HAND MIXING

Safe wiring connection without heat source ONE-HAND MIXING

Connect wires without fire or high temperatures. Automatically mix two liquids with just a push, allowing for easy electrical connections at room temperature without the use of solder.

For wiring and connections in environments where it is difficult to manage safety during high-temperature operations or where heat sources are not desired. It cures at room temperature, is not classified as a pharmaceutical hazardous substance, and complies with RoHS/REACH, reducing the burden of handling, transportation, and storage. ONE-HAND MIXING is a product that allows for the automatic mixing and dispensing of a two-component conductive epoxy adhesive with silver filler using a dedicated cartridge and mixer nozzle. - No weighing or mixing work is required, minimizing variability in the mixing ratio by the operator. - It cures at room temperature, making it suitable for conductive connections around heat-sensitive resin parts, FPC, LEDs, and sensors. - Conductive bonding is possible without using a soldering iron, even with materials that are difficult to solder, such as glass, resin, aluminum, and stainless steel. - It retains flexibility after curing, making it usable for repairs and connections in areas subject to bending and vibration. *For detailed data, please check the TDS and the special website.

  • Repair Agent
  • Solder
  • glue
  • glue

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Rear window defroster repair ONE-HAND MIXING

Rear window defroster repair ONE-HAND MIXING

Repair the debugger disconnection with adhesive. Just press to automatically mix the two components, allowing for easy cold connections without soldering.

For repairing the broken lines of the rear window defogger (heating wire) in vehicles. It has low viscosity, making it easy to draw lines, and can repair heating wires on glass that are difficult to solder, curing at room temperature. Its use is expanding in repair sites, including import car dealerships. ONE-HAND MIXING is a product that allows for the automatic mixing and dispensing of a two-component conductive epoxy adhesive containing silver filler using a dedicated cartridge and mixer nozzle. - No weighing or mixing is required, reducing variability in the mixing ratio by the operator. - It cures at room temperature, making it suitable for conductive connections around heat-sensitive resin parts, FPCs, LEDs, and sensors. - It enables conductive bonding to materials that are difficult to solder, such as glass, resin, aluminum, and stainless steel, without using a soldering iron. - It retains flexibility after curing, making it usable for repairs and connections in areas subject to bending and vibration. *For detailed data, please check the TDS and special website.

  • Repair Agent
  • Solder
  • glue
  • glue

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Search Keywords Related to glue

IPROS Services
COPYRIGHT © 2001-2026 IPROS CORPORATION ALL RIGHTS RESERVED.