We have compiled a list of manufacturers, distributors, product information, reference prices, and rankings for glue.
ipros is IPROS GMS ・ IPROS One of the largest technical database sites in Japan that collects information on.

glue(hand) - List of Manufacturers, Suppliers, Companies and Products | IPROS GMS

Last Updated： Aggregation Period:Jul 22, 2026～Aug 18, 2026
This ranking is based on the number of page views on our site.

glue Product List

31～60 item / All 75 items

Displayed results
Circuit formation on curved and flexible substrates ONE-HAND MIXING

Circuit formation on curved and flexible substrates ONE-HAND MIXING

Form a conductive pattern as if drawing a line. Just by pressing, the two liquids are automatically mixed, allowing for easy conductive connections at room temperature without the need for solder.

This product is intended for applications where you want to form conductive pathways on surfaces or flexible substrates, similar to drawing lines. It allows for the formation of conductivity at room temperature, even on substrates that are difficult to solder, thereby expanding the design freedom for circuit design in prototypes, demonstration units, and wearable considerations. ONE-HAND MIXING is a product that allows for the automatic mixing and dispensing of a two-component conductive epoxy adhesive containing silver fillers using a dedicated cartridge and mixer nozzle. - No weighing or mixing work is required, reducing variability in the mixing ratio by the operator. - It cures at room temperature, making it suitable for conductive connections around heat-sensitive resin parts, FPCs, LEDs, and sensors. - Conductive adhesion is possible on materials that are difficult to solder, such as glass, resin, aluminum, and stainless steel, without using a soldering iron. - It retains flexibility after curing, making it usable for repairs and connections in areas subject to bending and vibration. *For detailed data, please check the TDS and the special website.

  • Repair Agent
  • Solder
  • glue
  • glue

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Solder-free electronics project ONE-HAND MIXING

Solder-free electronics project ONE-HAND MIXING

Simultaneously and safely bond components and conduct electricity. With just a push, two liquids are automatically mixed, allowing for easy electrical connections at room temperature without the use of solder.

As a conductive adhesive that allows for simultaneous bonding and electrical conduction without using a soldering iron, it is suitable for electronics projects and circuit board repairs. Since there is no heating process, it reduces the risk of burns, enabling even those who are not skilled at soldering to make electrical connections. ONE-HAND MIXING is a product that automatically mixes and dispenses a two-component conductive epoxy adhesive with silver filler using a dedicated cartridge and mixer nozzle. - No weighing or mixing is required, which helps to suppress variations in the mixing ratio by the operator. - It cures at room temperature, making it suitable for electrical connections in heat-sensitive resin parts, FPCs, LEDs, and sensor areas. - Conductive bonding is possible without using a soldering iron, even with materials that are difficult to solder, such as glass, resin, aluminum, and stainless steel. - It retains flexibility after curing, allowing it to be used for repairs and connections in areas subject to bending and vibration. *For detailed data, please check the TDS and the special website.

  • Repair Agent
  • Solder
  • glue
  • glue

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
One-Hand Mixing Conductive Adhesive for Communication Equipment - Room Temperature Curing

One-Hand Mixing Conductive Adhesive for Communication Equipment - Room Temperature Curing

For bonding antennas of communication devices. Simply press for a conductive connection at room temperature.

In the telecommunications equipment industry, particularly in antenna bonding, reliable conductive connections of fine components are essential. The performance of antennas is greatly influenced by the electrical characteristics of the connection points, making the assurance of stable conductive performance indispensable. Traditional methods often face challenges when dealing with materials that are difficult to solder or components that are sensitive to heat. ONE-HAND MIXING offers a solution to these challenges by allowing for automatic mixing of two components simply by pushing, without the need for measuring or manual mixing, enabling conductive connections at room temperature. 【Application Scenarios】 - Conductive connections for telecommunications equipment antennas - Bonding of heat-sensitive resin components - Conductive bonding to dissimilar materials such as glass, aluminum, and stainless steel - Repairing areas subjected to bending or vibration 【Benefits of Implementation】 - Simplification of work processes and reduction of variability by operators - Decreased risk of damage to heat-sensitive components - Improved capability to handle materials that are difficult to solder - Durable connections that leverage flexibility

  • Repair Agent
  • Solder
  • glue
  • glue

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Large Area Electrode Contact Stabilization ONE-HAND MIXING

Large Area Electrode Contact Stabilization ONE-HAND MIXING

For the adhesion and fixation of large electrodes for measurement. Automatically mixes two liquids with just a push, allowing for easy conductive connections at room temperature without the use of solder.

This is for applications where large electrodes in the 200-300mm range are closely adhered to materials, such as in dielectric property measurements. It helps suppress the micro-gaps that can easily occur with simple physical contact, thereby reducing measurement variability. The workability, which allows for easy position adjustment after application, is also appreciated. ONE-HAND MIXING is a product that allows for the automatic mixing and dispensing of a two-component conductive epoxy adhesive with silver filler using a dedicated cartridge and mixer nozzle. - No weighing or mixing work is required, which helps suppress variability in the mixing ratio by the operator. - It cures at room temperature, making it suitable for conductive connections around heat-sensitive resin parts, FPCs, LEDs, and sensors. - It enables conductive bonding to materials that are difficult to solder, such as glass, resin, aluminum, and stainless steel, without the use of a soldering iron. - It retains flexibility even after curing, making it usable for repairs and connections in areas subject to bending and vibration. *For detailed data, please check the TDS and special website.

  • Repair Agent
  • Solder
  • glue
  • glue

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Outdoor equipment continuity connection ONE-HAND MIXING

Outdoor equipment continuity connection ONE-HAND MIXING

Conductive adhesive with weather resistance test data. Automatically mixes the two components just by pressing, allowing for easy electrical connections at room temperature without the use of solder.

For grounding connections and continuity repairs of equipment and facilities used outdoors. We publish data on weather resistance test results and changes in conductivity and adhesion during environmental testing as technical documentation to support considerations for outdoor applications. ONE-HAND MIXING is a product that allows for the automatic mixing and dispensing of a two-component conductive epoxy adhesive with silver filler using a dedicated cartridge and mixer nozzle. - No measuring or mixing work is required, reducing variability in the mixing ratio by the operator. - It cures at room temperature, making it suitable for conductive connections around heat-sensitive resin parts, FPCs, LEDs, and sensors. - Conductive bonding is possible with materials that are difficult to solder, such as glass, resin, aluminum, and stainless steel, without using a soldering iron. - It retains flexibility after curing, making it usable for repairs and connections in areas subject to bending and vibration. *For detailed data, please refer to the TDS and special website.

  • Repair Agent
  • Solder
  • glue
  • glue

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Japanese-made, ready-to-ship conductive adhesive ONE-HAND MIXING

Japanese-made, ready-to-ship conductive adhesive ONE-HAND MIXING

For those struggling with long lead times for overseas products. With just a push, it automatically mixes two liquids, allowing for easy room-temperature connections where solder cannot be used.

We address issues such as unstable delivery times for overseas conductive adhesives, the need for refrigerated storage, and classification as hazardous materials. With domestic manufacturing and an immediate delivery system, we support urgent repairs and quick evaluations. We also offer bulk purchase discounts for corporations. *Consultation required. ONE-HAND MIXING is a product that allows for the automatic mixing and dispensing of a two-component conductive epoxy adhesive containing silver filler using a dedicated cartridge and mixer nozzle. - No weighing or mixing is required, reducing variability in the mixing ratio by the operator. - It cures at room temperature, making it suitable for conductive connections in heat-sensitive resin parts, FPCs, LEDs, and sensor areas. - Conductive bonding is possible with materials that are difficult to solder, such as glass, resin, aluminum, and stainless steel, without using a soldering iron. - It retains flexibility after curing, making it usable for repairs and connections in areas subject to bending and vibration. *For detailed data, please check the TDS and special website.

  • Repair Agent
  • Solder
  • glue
  • glue

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
One-Hand Mixing Room Temperature Curing Conductive Adhesive for Automotive Use

One-Hand Mixing Room Temperature Curing Conductive Adhesive for Automotive Use

No measuring or manual mixing required. Just press for easy connection at room temperature.

In the automotive industry, reliable fixation and ensuring conductivity of sensors that support vehicle safety and functionality are required. In particular, for sensor components that are sensitive to heat or areas that experience vibration and shock, soldering can be difficult, and there are concerns about the impact of heat on the components. Improper fixation or poor conductivity can lead to sensor malfunctions or failures. ONE-HAND MIXING allows for the automatic mixing and dispensing of two components using a dedicated cartridge and mixer nozzle, enabling quick and reliable conductive connections at room temperature without the hassle of measuring or manual mixing. 【Application Scenarios】 - Fixation and ensuring conductivity of heat-sensitive sensor components - Sensor connections in areas subject to vibration or shock - Conductive bonding to materials that are difficult to solder, such as glass, resin, aluminum, and stainless steel - Work around sensors in tight spaces 【Benefits of Implementation】 - Reduction in work time and improvement in work efficiency - Stabilization of quality by suppressing variations in mixing ratios by workers - Reduction of impact on heat-sensitive components - Enabling conductive connections to materials that are difficult to solder - Response to vibrations due to flexibility after curing

  • Repair Agent
  • Solder
  • glue
  • glue

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
One-hand mixing for components sensitive to heat connection.

One-hand mixing for components sensitive to heat connection.

For connections where soldering is not possible. No weighing or manual mixing required. Just press to automatically mix the two components, making it easy to create conductive connections at room temperature without solder.

For those concerned about thermal damage to components and substrates and looking for alternatives to soldering for conductive connections, our room-temperature curing conductive adhesive contributes to improvements in prototyping, repairs, and small-scale production processes. ONE-HAND MIXING is a product that allows for the automatic mixing and dispensing of a two-component conductive epoxy adhesive with silver filler using a dedicated cartridge and mixer nozzle. - No weighing or mixing is required, reducing variability in the mixing ratio by the operator. - It cures at room temperature, making it suitable for conductive connections around heat-sensitive resin components, FPCs, LEDs, and sensors. - Conductive adhesion is possible without using a soldering iron, even on materials that are difficult to solder, such as glass, resin, aluminum, and stainless steel. - It retains flexibility after curing, making it usable for repairs and connections in areas subjected to bending and vibration. *For detailed data, please check the TDS and special website.

  • Repair Agent
  • Solder
  • glue
  • glue

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Cold machine circuit repair ONE-HAND MIXING

Cold machine circuit repair ONE-HAND MIXING

For repairing disconnections and contacts in equipment used at low temperatures. Just press to automatically mix the two components, allowing for easy electrical connections at room temperature without the need for solder.

For repairing poor conductivity or disconnections in equipment and facilities used in cold environments. It has been confirmed that the adhesive layer functions stably even in environments where rapid temperature changes occur, avoiding solder heat with room temperature curing. This expands options for maintenance and on-site repairs. ONE-HAND MIXING is a product that allows for the automatic mixing and dispensing of a two-component conductive epoxy adhesive with silver filler using a dedicated cartridge and mixer nozzle. - No weighing or mixing work is required, reducing variability in the mixing ratio by the operator. - It cures at room temperature, making it suitable for conductive connections around heat-sensitive resin parts, FPCs, LEDs, and sensors. - Conductive bonding is possible without using a soldering iron, even with materials that are difficult to solder, such as glass, resin, aluminum, and stainless steel. - It retains flexibility after curing, making it usable for repairs and connections in areas subjected to bending and vibration. *For detailed data, please check the TDS and special website.

  • Repair Agent
  • Solder
  • glue
  • glue

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Non-hazardous conductive adhesive ONE-HAND MIXING

Non-hazardous conductive adhesive ONE-HAND MIXING

Storage at room temperature is acceptable. A material with low management burden. Automatically mixes two components with just a push, allowing for easy connections at room temperature where solder cannot be used.

This is a conductive adhesive that does not fall under the category of pharmaceutical-grade hazardous substances and complies with RoHS and REACH regulations. It can be stored at room temperature, eliminating the need for refrigeration or freezing, which reduces the burden of storage, transportation, and management in universities, research institutions, and corporate environments. ONE-HAND MIXING is a product that allows for the automatic mixing and dispensing of a two-component conductive epoxy adhesive containing silver fillers using a dedicated cartridge and mixer nozzle. - No weighing or mixing is required, which minimizes variations in the mixing ratio by the operator. - It cures at room temperature, making it suitable for conductive connections in heat-sensitive resin parts, FPCs, LEDs, and sensor areas. - It enables conductive bonding to materials that are difficult to solder, such as glass, resin, aluminum, and stainless steel, without the use of a soldering iron. - It retains flexibility after curing, allowing for repairs and connections in areas subject to bending and vibration. *For detailed data, please refer to the TDS and the special website.

  • Repair Agent
  • Solder
  • glue
  • glue

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
One-Hand Mixing Room Temperature Curing Conductive Adhesive for Medical Devices

One-Hand Mixing Room Temperature Curing Conductive Adhesive for Medical Devices

For connecting medical device probes. No measurement or manual mixing required for room temperature conductive connection.

In the field of medical devices, reliable conduction assurance is required for precise probe connections. Particularly when using heat-sensitive sensors or delicate components, there are cases where soldering is difficult or where it is necessary to avoid thermal effects. In such situations, uniform conduction performance and ease of operation become important. ONE-HAND MIXING allows for the automatic mixing and dispensing of two components using a dedicated cartridge and mixer nozzle, eliminating the need for weighing and manual mixing, and reducing variations in formulation by the operator. Since it cures at room temperature, it can be safely used for conduction connections of heat-sensitive medical device components. 【Application Scenarios】 - Conduction connections of medical probes - Wiring connections around sensors - Conduction repairs of heat-sensitive electronic components - Conduction bonding to glass or resin materials 【Benefits of Implementation】 - Easy conduction connections even in areas where soldering is difficult - Reduction in work time and assurance of uniform quality - Avoidance of damage to components due to heat - Flexibility that accommodates vibrations and bending

  • Repair Agent
  • Solder
  • glue
  • glue

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
One-Hand Mixing Room Temperature Curing Conductive Adhesive for Drones

One-Hand Mixing Room Temperature Curing Conductive Adhesive for Drones

For bonding drone propellers. No measuring or hand mixing required, connects at room temperature.

In the drone industry, while lightweight and high-strength structures are required, components such as propellers may need electrical connections. Traditional soldering has faced challenges in dealing with heat-sensitive materials and applying to complex shapes. Additionally, manual mixing of adhesives carries the risk of performance degradation due to variations in mixing ratios. ONE-HAND MIXING addresses these challenges, enabling easy and reliable electrical connections for drone propeller bonding at room temperature. 【Usage Scenarios】 - Electrical connections for drone propeller components - Electrical processing for heat-sensitive resin propellers - Quick repair work on-site 【Benefits of Implementation】 - Enables electrical connections for materials that are difficult to solder - Reduces variations in mixing ratios by operators, achieving stable electrical performance - Lowers the impact on components due to heat, as it cures at room temperature - Flexible and suitable for connections in areas subject to vibration

  • Repair Agent
  • Solder
  • glue
  • glue

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
【For Lighting】Room Temperature Curing Conductive Adhesive ONE-HAND MIXING

【For Lighting】Room Temperature Curing Conductive Adhesive ONE-HAND MIXING

Simply press to easily connect the LED at room temperature. No weighing or hand mixing required.

In the lighting industry, reliable conductive connections for LEDs are directly linked to product performance and lifespan. Particularly in the implementation of heat-sensitive LED components and surrounding substrates, there is a need to avoid difficulties with soldering and to prevent damage from heat. Additionally, improving work efficiency and minimizing variations in mixing by operators are also important. ONE-HAND MIXING addresses these challenges by automatically mixing and dispensing two components with a dedicated cartridge and mixer nozzle, achieving room-temperature curing conductive adhesion without the need for weighing or manual mixing. This makes it easier to create conductive connections to materials that are difficult to solder and to work around heat-sensitive components. 【Application Scenarios】 - Conductive connections between LED chips and substrates - Wiring connections within LED modules - Ensuring conductivity around heat-sensitive resin components - Conductive adhesion to materials that are difficult to solder, such as glass and aluminum 【Benefits of Implementation】 - Eliminates the need for soldering irons, enhancing safety and convenience in work - Reduces variations in mixing ratios by operators, achieving stable conductive performance - Avoids damage to components from heat due to room-temperature curing - Increases reliability against vibration and bending due to flexibility after curing

  • Repair Agent
  • Solder
  • glue
  • glue

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
High-performance, high-quality adhesive 'LOXEAL' with a focus on safety.

High-performance, high-quality adhesive 'LOXEAL' with a focus on safety.

"LOXEAL" is an adhesive developed by an Italian adhesive manufacturer using technology cultivated over many years, suitable for various applications.

Founded in the 1980s, "LOXEAL" has received numerous international certifications since its establishment and is actively engaged in environmental protection. As an official distributor of LOXEAL, we provide sales and technical support for LOXEAL products. 【Applications】 ● Thread sealing ● Thread locking ● Gasketing ● Retaining ● UV curing adhesives ● Cyanoacrylate adhesives ● Epoxy adhesives ● Acrylic adhesives ● Polyurethane adhesives ● Surface conditioners and complementary products *For more details, please download the PDF or feel free to contact us.

  • glue
  • Repair Agent
  • Other safety and hygiene products
  • glue

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Hot Melt Adhesives, Glue Guns, Applicators Comprehensive Catalog

Hot Melt Adhesives, Glue Guns, Applicators Comprehensive Catalog

We are focusing on improving the performance of hot melt applicators while also developing new products.

This is an introduction to the comprehensive catalog of Kayo Corporation's hot melt adhesives, glue guns, and applicators.

  • glue
  • glue

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Conductive Adhesive "ECA Series"

Conductive Adhesive "ECA Series"

Epoxy-based silver paste and nickel paste that cure with low-temperature heating.

The ECA series is a one-component paste-type conductive adhesive. It offers three types, mixed with metal particles "silver," "nickel," and "sintered silver" in epoxy resin. It is suitable for a wide range of fields, including high-reliability devices such as automotive and industrial equipment, consumer electronics, mobile electronic devices, and semiconductor and optical packages. For product inquiries, please visit our website. http://www.nihonhanda.com For more details about the products, please refer to the information below.

  • glue
  • glue

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Thread locker | Anaerobic adhesive

Thread locker | Anaerobic adhesive

This adhesive exhibits excellent bonding strength when bonding metal to metal in an air-tight condition. It is delivered at a value price.

Anaerobic adhesives are adhesives that demonstrate excellent bonding strength when bonding metal to metal in an air-tight environment. They are widely used in various industrial fields, from preventing screw loosening to applications in cars, motorcycles, construction, and electrical products, as well as in hobbies like remote control models. 3M, which has developed a diverse range of adhesives to meet all needs from the aerospace industry to office use, has made it possible to offer high-performance anaerobic adhesives at value prices that do not loosen even in vibrating areas, exhibit excellent sealing properties, and do not require high torque tightening.

  • glue
  • glue

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Also for automotive engine areas! | 3M's high heat-resistant one-component epoxy adhesive

Also for automotive engine areas! | 3M's high heat-resistant one-component epoxy adhesive

Excellent durability and performance maintained even under harsh conditions. Ideal for assembly in areas requiring high heat resistance.

3M's high-temperature one-component epoxy adhesive 3M(TM) Scotch-Weld(TM) High-Temperature One-Component Epoxy Adhesive IW2460/IW2190 is an adhesive with excellent heat resistance. Furthermore, IW2460 features high strength, while IW2190 has high toughness, making them ideal for assembly in areas that require high heat resistance, such as industrial robots and around automotive engines. Features: - Exhibits high adhesive strength in high-temperature environments. - High peel strength and improved impact resistance. - Excellent durability, maintaining performance even under severe conditions of high temperature and high humidity.

  • Repair Agent
  • glue

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Strong and flexible! Compatible with dissimilar bonding and impact resistance | DP8610NS

Strong and flexible! Compatible with dissimilar bonding and impact resistance | DP8610NS

With a 200% growth characteristic, it reduces shrinkage during curing. It is suitable for improving the adhesion efficiency and quality of thin materials and dissimilar materials.

The "3M(TM) Scotch-Weld(TM) Two-Part Mixed Acrylic Adhesive DP8610NS" is a structural adhesive that offers high strength and fast curing while also possessing high flexibility. It minimizes shrinkage and distortion during curing, even when bonding thin materials or dissimilar substrates, and can be used on various materials including plastics, composites, painted surfaces, oily surfaces, aluminum, and stainless steel. It develops strength in about 16 minutes, allowing for efficient work, and is suitable for a wide range of applications such as bonding glass to frames and adhering three-dimensional shapes. 【Features】 ■ Contributes to the efficiency of bonding thin sheets and dissimilar materials ■ Suitable for gap-filling and bonding applications ■ Low-odor formulation for ease of use on-site ■ A lineup of products tailored to two different curing speeds *You can view product information by downloading the PDF. Please feel free to contact us with any inquiries.

  • glue
  • glue

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Can be bonded directly to nylon | Structural adhesive DP8910NS

Can be bonded directly to nylon | Structural adhesive DP8910NS

If it is a nylon binder, it can be strongly bonded to nylon (polyamide) without surface treatments such as plasma or frame processing.

Typically, when bonding nylon components, heat resistance is often required for the adhesive joint, and surface treatment is also necessary for bonding. This is a new adhesive that enables structural bonding to nylon (polyamide) without the need for surface treatments such as plasma or flame treatment.

  • glue
  • glue

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Low-temperature curing metal adhesive "MAX 102"

Low-temperature curing metal adhesive "MAX 102"

Achieving stable micro pin transfer and ejection! An adhesive with excellent thermal conductivity, electrical conductivity, and heat resistance.

"MAX102" is a low-temperature curing metal adhesive that features excellent thermal conductivity, electrical conductivity, heat resistance, and UV resistance. It also excels in transferability and dispensing, achieving stable micro pin transfer and consistent dispensing without variation. It is ideal for die bonding materials for LEDs and laser diodes. 【Features】 ■ No strength reduction at high temperatures ■ Capable of micro dispensing ■ Stable micro pin transfer achievable ■ Forms highly reliable metal joints For product inquiries, please visit our website. http://www.nihonhanda.com For more details about the product, please refer to the information below.

  • Other metal materials
  • glue
  • Solder
  • glue

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Flexible and versatile type | Structural adhesive DP8710NS

Flexible and versatile type | Structural adhesive DP8710NS

It allows the initial strength to manifest shortly after the time has passed! The time required to fix and clamp the material is minimized.

We would like to introduce the 3M Scotch-Weld two-component mixed acrylic adhesive that we handle. After the usable time (bonding time), initial strength develops immediately (within 3 minutes). It cures faster than epoxy, urethane, and other acrylic adhesives, requiring less time to fix and clamp materials, thus improving productivity. The curing speed of 'DP8710NS' is a usable time of 9 minutes and an initial strength development time of 13 minutes. Additionally, we offer 'DP8705NS' with a usable time of 4 minutes and an initial strength development time of 7 minutes, and 'DP8725NS' with a usable time of 21 minutes and an initial strength development time of 28 minutes. 【DP8700 Series Features】 ■ High impact resistance and peel strength, flexibility ■ Heat resistance ■ Non-corrosive to metals ■ Ease of use on-site ■ Applicability with automatic dispensing machines *For more details, please refer to the PDF document or feel free to contact us.

  • glue
  • glue

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Flexible, strong, and impact-resistant adhesive | DP6310NS

Flexible, strong, and impact-resistant adhesive | DP6310NS

Characterized by flexibility after hardening, it enables bonding between materials with different coefficients of thermal expansion. It can be used with composite materials, plastics, metals, and wood.

Features of 3M Scotch-Weld Structural Adhesive 1. Improved Design Aesthetics The joints become less noticeable and smoother, enhancing the product's design appeal. Additionally, it reduces weight and noise while improving corrosion resistance and fatigue resistance. 2. Design Flexibility It enables bonding of composites and metals, as well as assembly of difficult-to-bond plastics, allowing for the use of thinner and lighter substrates. 3. Increased Productivity It reduces labor and material costs, speeds up assembly without the need for surface treatment, and allows for adjustment of curing speed to match the process. 4. Accurate and Easy to Handle It can be dispensed using dedicated hand tools or automated devices. A wide range of viscosity settings is available to choose from. 5. Strong yet Flexible Bonding The adhesive performs bonding and sealing simultaneously, alleviating stress concentration and absorbing shocks and vibrations to achieve durable bonding. 6. Enhanced Durability It exhibits chemical resistance, environmental resistance, resistance to (electrolytic) corrosion, and fatigue resistance, preventing delamination of materials at edges and corners.

  • glue
  • glue

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Polyolefin materials can be strongly bonded as they are! | Adhesive for plastics

Polyolefin materials can be strongly bonded as they are! | Adhesive for plastics

Polyolefins can be strongly bonded without a primer. Polyolefins are now a bondable material.

3M(TM) Scotch-Weld(TM) Acrylic-based Adhesive DP-8010 BLUE does not require pretreatment or equipment, yet it bonds polyolefins with material destruction strength. It exhibits adhesive strength that surpasses conventional processes, including primer treatment and traditional adhesives, without the need for a primer. Additionally, the system allows for the precise mixing and dispensing of the main agent and hardener contained in cartridges using a dedicated handgun and nozzle, eliminating the hassle of two-component mixing. This ensures stable adhesion to various shapes and dissimilar materials, regardless of the work environment. **Benefits of Using Scotch-Weld(TM) DP-8010:** In comparison to vibration welding and thermal welding: 1. No expensive equipment required 2. Bonding of dissimilar materials is possible 3. Accommodates various shapes 4. No deformation of materials 5. Suitable for any work environment In comparison to primer treatment and traditional adhesives: 1. Stronger adhesive strength 2. Reduction in processes 3. Flexibility in time until adhesive work In comparison to mechanical fastening: 1. Stress distribution is possible 2. Increased design and design freedom 3. Does not damage materials 4. Beautiful finish

  • Repair Agent
  • glue

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
High heat-resistant applications | 1-component and 2-component epoxy adhesives

High heat-resistant applications | 1-component and 2-component epoxy adhesives

Introducing epoxy adhesives suitable for the assembly of components that require high heat resistance and reliability.

This product exhibits high adhesive strength in high-temperature environments, increasing the options for bonding methods for parts exposed to high temperatures, such as in automobiles and industrial machinery. It demonstrates and maintains excellent performance in harsh environments (high temperatures, rapid temperature changes, vibrations, etc.) in terms of shear, peel, and impact resistance. It is suitable for the assembly of components that require high heat resistance and reliability, such as automotive electrical parts, industrial robots, electronic components, and sensor fixation. 【Features】 ■ High adhesive strength in high-temperature environments ■ Increases options for bonding methods for parts exposed to high temperatures ■ Maintains performance even in rapid temperature changes and vibration environments ■ Exhibits and maintains excellent performance in shear, peel, and impact resistance in harsh environments ■ Suitable for the assembly of components that require high heat resistance and reliability *For more details, please refer to the PDF document or feel free to contact us.

  • glue
  • glue

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
[For Maintenance] One-Handed Usable Room Temperature Curing Conductive Adhesive

[For Maintenance] One-Handed Usable Room Temperature Curing Conductive Adhesive

Ideal for emergency repairs. Easily achieve a conductive connection at room temperature with just a push.

In maintenance settings, quick and reliable recovery is required when equipment failures or damage occur. Particularly in repairs where electrical continuity is necessary, challenges may arise when soldering is difficult or when dealing with heat-sensitive components. In such situations, a solution that can establish a conductive connection at room temperature without using a soldering iron is essential. ONE-HAND MIXING is a product that meets these urgent needs. 【Usage Scenarios】 - Emergency repairs of conductive parts in malfunctioning electronic devices - Wiring repairs around heat-sensitive components - Situations requiring rapid continuity assurance on-site - Conductive connections to materials that are difficult to solder (glass, resin, aluminum, SUS, etc.) 【Benefits of Implementation】 - Supports rapid recovery operations in emergencies - Enables conductive connections even in difficult soldering areas - Reduces damage to components caused by heat - Alleviates the burden on workers and improves work efficiency

  • Repair Agent
  • Solder
  • glue
  • glue

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Single-handedly usable room temperature curing conductive adhesive for robotics.

Single-handedly usable room temperature curing conductive adhesive for robotics.

Room temperature curing conductive adhesive that requires no measuring or hand mixing for joint repair.

In the field of robotics joint repair, precise conductive connections and durability are required. In particular, addressing components that are sensitive to heat, complex shapes, and improving work efficiency are emphasized. Traditional repair methods can face challenges such as difficulties in soldering and variations due to the skill level of the workers. ONE-HAND MIXING addresses these issues with an automatic mixing and dispensing function that can be easily handled with one hand, achieving uniform quality conductive connections at room temperature. 【Usage Scenarios】 - Wiring repair of robot joints - Conductive connections around sensors - Application of conductive patches to movable parts - Conductive bonding to aluminum and resin components 【Benefits of Implementation】 - Enables conductive connections in areas where soldering is difficult - Stable quality that does not depend on the skill of the worker - Reduces the impact on heat-sensitive components - Flexibility to accommodate vibrations and bending

  • Repair Agent
  • Solder
  • glue
  • glue

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
For batteries | Structural adhesives

For batteries | Structural adhesives

Introducing an adhesive joining method that compensates for the shortcomings of welding, riveting, screws, and bolts.

In recent years, particularly with the rise of EVs, changes in battery structures have progressed, and structural adhesives chosen for numerous assembly tasks possess load-bearing capacity, heat resistance, humidity resistance, and chemical resistance. The "3M(TM) Scotch-Weld(TM) Structural Adhesive" is a structural adhesive that can be used as a bonding solution when high strength, durability, and improved appearance are required. By responding to the design requirements of our customers and offering a product lineup with various chemical components, curing methods, open times, and adhesive characteristics, we can contribute to solving our customers' challenges. 【Features】 - A diverse lineup of adhesives including acrylic, epoxy, and urethane types. - Support from selecting structural adhesives to proposing automation and application equipment. 【What 3M(TM) Can Provide】 - Proposals for bonding methods from a wide range of product forms, including low-viscosity adhesives, non-drip adhesives, gap fillers, sealants, thin double-sided tapes, and 3M(TM) VHB(TM) tape. - Various characteristics such as short curing types that do not require heating, easy pretreatment types for substrates, and low-odor types. - Proposals for process automation and testing methods, along with a global product supply system.

  • glue
  • glue

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Optimal Solution for Metal Joining | Metal Bonder DP8507NS

Optimal Solution for Metal Joining | Metal Bonder DP8507NS

【Can be stored at room temperature】Adheres metals firmly and quickly. Eliminates the hassle of mixing two components with a dedicated handgun and nozzle.

By using a cartridge containing the main agent and hardener, which are quantitatively mixed and discharged through a dedicated handgun and nozzle, the hassle of two-component mixing is eliminated, resulting in stable adhesion and solving various issues in areas where welding is difficult. Additionally, it can easily provide sealing effects in combination with spot welding instead of seam welding. It can be used in narrow gaps and vertical surfaces without restriction. It also has good paintability and has a long track record in various painting processes such as electrodeposition and baking. ■ Safe and mess-free! : The adhesive is contained in the cartridge. ■ Cures in 15 minutes! : It cures quickly, so it doesn't take up much space for curing. ■ Works well even on slightly dirty surfaces! : Adhesion is good even with some residual oil. ■ Quantitative mixing inside the nozzle! : No need for mixing two components or applying twice, ensuring reliable mixing. ■ Easy alignment! : Being in paste form makes alignment simple. It has high thixotropy and won't sag on vertical surfaces. ■ Simple operation that anyone can do! : High-performance adhesive is discharged just by pulling the trigger of the gun.

  • glue
  • Welding Machine
  • glue

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
One-handed usable room temperature curing conductive adhesive for automotive applications.

One-handed usable room temperature curing conductive adhesive for automotive applications.

No measuring or hand mixing required. Just press for easy connection at room temperature.

In the automotive industry, various sensors are installed to enhance vehicle safety and comfort. To ensure the accurate operation and reliability of these sensors, secure fastening of components and conductive connections are crucial. Particularly, when connecting heat-sensitive components or materials that are difficult to solder, selecting the appropriate adhesive is essential. ONE-HAND MIXING addresses these challenges and enables easy and reliable conductive connections at room temperature. 【Application Scenarios】 - Fixing heat-sensitive sensor components - Conductive connections to resin housings - Repairing areas subject to vibration or impact - Conductive bonding to aluminum or SUS materials 【Benefits of Implementation】 - Reduction of work time and increased efficiency - Minimization of mixing errors and variations by operators - Reduced risk of damage to components from heat - Improved capability to address areas where soldering is difficult - Durability against vibration and bending due to flexibility

  • Repair Agent
  • Solder
  • glue
  • glue

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Search Keywords Related to glue

IPROS Services
COPYRIGHT © 2001-2026 IPROS CORPORATION ALL RIGHTS RESERVED.