Last Updated： Aggregation Period:Feb 18, 2026～Mar 17, 2026
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Feb 18, 2026～Mar 17, 2026
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Feb 18, 2026～Mar 17, 2026
This ranking is based on the number of page views on our site.
301～330 item / All 507 items
![[High Durability × Short Delivery Time] High Frequency Measurement Probe_RF Probe Head](https://image.mono.ipros.com/public/product/image/d9c/2001100048/IPROS26545569469302111723.jpeg?w=280&h=280)
Probes have entered the era of domestically produced and custom orders!
I want to contact many pads at once! I want to probe from various angles! I want to have a custom-made product, but I don't know where to ask... We have a lineup that solves such concerns. We will suggest probes that fit your measurement environment!
Compact and simple spot welding head.
This is a dedicated machine for spot welding used in cases where workability and precision are required during the processing of mass-produced or specially shaped products, or where the installation of jigs is necessary. You can choose from four types of head configurations (direct, parallel, parallel gap, heat press) and two types of electrode vertical drive methods (wire, air), allowing you to configure a head suitable for your welding projects and working environment. It is compact and allows for easy mass production processing of small to medium lots and welding of special and fine-shaped parts by installing dedicated electrodes or jigs on the base plate. 【Recommended for the following people!】 1) Those who have welding projects involving thin and small items, with a wide variety of products in small lots, and want to produce a compact and easy-to-handle welding head at a low cost. 2) Those in research and development who want to create a dedicated head for performing fine or special welding easily. *For more details, please contact us or download the PDF materials.
![Impedance Head (DJB) [AF/100/10]](https://image.mono.ipros.com/public/product/image/9bc/2000738807/IPROS18375729165415271922.jpeg?w=280&h=280)
It is equipped with an IEPE accelerometer and an IEPE force sensor, and outputs simultaneously. It is ideal for mechanical impedance measurement (structural analysis).
You can use the DJB company's IEPE signal conditioner for measurement.
It is a high-precision planetary gear head with many options available and configurable according to the application.
The FAULHABER planetary gearhead, model 06/1, has an outer diameter of 6mm and an output shaft diameter of 0.8mm. The gear train is made of steel and is available in several configurations ranging from 4:1 to 4096:1. It can operate with a permissible torque of 25mNm for continuous operation and 35mNm for intermittent operation.
It is a high-precision planetary gearhead with many options available and configurable according to the application.
The FAULHABER planetary gear head, model 06A, has an outer diameter of 5.8mm and an output shaft diameter of 1.4mm. The gear train is manufactured with several patterns set in the range of 25:1 to 625:1, and it can operate with a permissible torque of 25mNm for continuous operation and 37.5mNm for intermittent operation.
It is a high-precision planetary gear head with many options available and configurable according to the application.
The FAULHABER planetary gear head, model 08/1, has an outer diameter of 8mm and an output shaft diameter of 1.5mm. The gear train is made of steel and is available in several configurations ranging from 4:1 to 4096:1. It can operate with a permissible torque of 60 mNm for continuous operation and 120 mNm for intermittent operation.
It is a high-precision planetary gearhead with many options available and configurable according to the application.
The FAULHABER planetary gearhead, model 10/1, has an outer diameter of 10mm and an output shaft diameter of 2mm. The gear train is made of metal and is available in several configurations ranging from 4:1 to 4096:1, with a permissible torque of 100 mNm for continuous operation and 200 mNm for intermittent operation.
It is a high-precision planetary gearhead with many options available and configurable according to the application.
The FAULHABER planetary gear head, model 12/4, has an outer diameter of 12mm and an output shaft diameter of 3mm. The gear train is made of metal and is available in several configurations ranging from 4:1 to 1024:1. It can operate with a permissible torque of 300 mNm for continuous operation and 450 mNm for intermittent operation.
It is a high-precision planetary gear head with many options available and configurable according to the application.
The FAULHABER planetary gearhead, model 13A, has an outer diameter of 13mm and an output shaft diameter of 3mm. The gear train is made of plastic and aluminum, and several patterns are set within a range of 16:1 to 1024:1. It can operate with a permissible torque of 180 mNm for continuous operation and 220 mNm for intermittent operation.
It is a high-precision planetary gear head with many options available and configurable according to the application.
The FAULHABER planetary gear head, model 15A, has an outer diameter of 15mm and an output shaft diameter of 3mm. The gear train is made of plastic and is available in several configurations ranging from 14:1 to 23014:1. It can operate with a permissible torque of 250 mNm for continuous operation and 400 mNm for intermittent operation.
It is a high-precision planetary gear head with many options available and configurable according to the application.
The FAULHABER planetary gearhead, model 17/1, has an outer diameter of 17mm and an output shaft diameter of 4mm. The gear train is made of steel and is available in several configurations ranging from 3.33:1 to 1367:1. It can operate with a permissible torque of 550 mNm for continuous operation and 800 mNm for intermittent operation.
It is a high-precision planetary gear head with many options available and configurable according to the application.
The FAULHABER planetary gearhead, model 23/1, has an outer diameter of 23mm and an output shaft diameter of 6mm. The gear train is made of steel and is available in several configurations ranging from 3.71:1 to 1526:1. It can operate with a permissible torque of 700 mNm for continuous operation and 1000 mNm for intermittent operation.
It is a high-precision planetary gear head with many options available and configurable according to usage.
The FAULHABER planetary gearhead, model 26/1, has an outer diameter of 26mm and an output shaft diameter of 5mm. The gear train is made of plastic and steel, and several patterns are set within a range of 3.71:1 to 1526:1. It can operate with a permissible torque of 3500 mNm for continuous operation and 4500 mNm for intermittent operation.
It is a high-precision planetary gearhead with many options available and configurable according to the application.
The FAULHABER planetary gear head, model 26A, has an outer diameter of 26mm and an output shaft diameter of 6mm. The gear train is made of plastic and is available in several configurations ranging from 13:1 to 256:1. It can operate with a permissible torque of 1000 mNm for continuous operation and 1500 mNm for intermittent operation.
It is a high-precision planetary gearhead with many options available and configurable according to the application.
The FAULHABER planetary gearhead, model 38/1 S, has an outer diameter of 38mm and an output shaft diameter of 8mm. The gear train is made of steel and is available in several configurations ranging from 14:1 to 1526:1. It can operate with a permissible torque of 10,000 mNm for continuous operation and 15,000 mNm for intermittent operation.
It is a high-precision planetary gear head with many options available and configurable according to the application.
The FAULHABER planetary gearhead, model 44/1, has an outer diameter of 44mm and an output shaft diameter of 10mm. The gear train is made of metal and is available in several configurations ranging from 4.8:1 to 2548:1. It can operate with a permissible torque of 16,000 mNm for continuous operation and 20,000 mNm for intermittent operation.
It is a high-precision gear head with many options available, customizable according to the application.
The FAULHABER gearhead, model 08/2, has an outer diameter of 8 mm and an output shaft diameter of 1.5 mm. The gear train is made of metal, and several patterns are set within a reduction ratio range of 4:1 to 1518:1. It can operate with a permissible torque of 15 mNm for continuous operation and 25 mNm for intermittent operation.
It is a high-precision gear head with many options available, customizable according to its intended use.
The FAULHABER spur gearhead, model 15/5, has an outer diameter of 16mm and an output shaft diameter of 3mm. The gear train is made of plastic and steel, with several patterns set within a reduction ratio range of 6.3:1 to 3101:1. It can operate with a permissible torque of 100 mNm for continuous operation and 300 mNm for intermittent operation.
It is a high-precision gear head with many options available and configurable according to the application.
The FAULHABER 16A spur gearhead has an outer diameter of 16mm and an output shaft diameter of 2mm. The gear train is made of metal and is available in several configurations with a reduction ratio ranging from 11.9:1 to 5752:1. It can operate with a permissible torque of 30 mNm for continuous operation and 100 mNm for intermittent operation.
It is a high-precision gear head with many options available, achieving zero backlash.
The FAULHABER zero backlash spur gear head, model 08/3, has an outer diameter of 8 mm and an output shaft diameter of 1.5 mm. The gear train is made of metal and is available in several configurations with a reduction ratio ranging from 120:1 to 1518:1. It can operate with a permissible torque of 15 mNm for continuous operation and 15 mNm for intermittent operation.
It is a high-precision gear head with many options available, achieving zero backlash.
The FAULHABER zero backlash spur gear head, model 12/5, has an outer diameter of 12mm and an output shaft diameter of 2mm. The gear train is made of metal and is available in several configurations with a reduction ratio ranging from 69.2:1 to 2050:1. It can operate with a permissible torque of 30 mNm for continuous operation and 100 mNm for intermittent operation.
It is a high-precision gear head with many options available, achieving zero backlash.
The FAULHABER zero backlash spur gear head, model 15/8, has an outer diameter of 16mm and an output shaft diameter of 3mm. The gear train is made of steel and is available in several configurations with reduction ratios ranging from 76:1 to 1670:1. It can operate with a permissible torque of 100 mNm for continuous operation and 300 mNm for intermittent operation.
It is a high-precision gear head with many options available, achieving zero backlash.
The FAULHABER zero backlash spur gear head, model 16/8, has an outer diameter of 17mm and an output shaft diameter of 3mm. The gear train is made of steel and is available in several configurations with a reduction ratio ranging from 76:1 to 1670:1. It can operate with a permissible torque of 100 mNm for continuous operation and 300 mNm for intermittent operation.
It is a high-precision planetary gear head with many options available and configurable according to the application.
The FAULHABER planetary gearhead, model 22GPT, has an outer diameter of 22mm and an output shaft diameter of 6mm. The gear train is made of stainless steel and is available in several configurations ranging from 3:1 to 1294:1. It can operate with a permissible torque of 1.8 Nm for continuous operation and 2.5 Nm for intermittent operation.
It is a high-precision planetary gear head with many options available and customizable settings for various applications.
The FAULHABER planetary gearhead, model 32GPT, has an outer diameter of 32mm and an output shaft diameter of 8mm. The gear train is made of stainless steel and is available in several configurations with gear ratios ranging from 3:1 to 1294:1. It can operate with a permissible torque of 8 Nm for continuous operation and 10 Nm for intermittent operation.
It is a high-precision planetary gear head with many options available and configurable according to the application.
The FAULHABER planetary gearhead, model 42GPT, has an outer diameter of 42mm and an output shaft diameter of 12mm. The gear train is made of stainless steel and is available in several configurations with reduction ratios ranging from 3:1 to 1294:1. It can operate with a permissible torque of 18 Nm for continuous operation and 25 Nm for intermittent operation.
It is a high-precision planetary gear head with many options available and configurable according to the application.
The FAULHABER planetary gear head, model 03B, has an outer diameter of 3.4mm and an output shaft diameter of 0.8mm. The gear train is made of steel and is available in several configurations with a reduction ratio ranging from 25:1 to 125:1. It can operate with a permissible torque of 0.88mNm for continuous operation and 1.32mNm for intermittent operation.
Industrial inkjet heads with a wealth of experience and suitable for various applications.
Industrial inkjet head manufactured by FUJIFILM Dimatix, USA. On-demand piezoelectric type, high performance and high productivity. Long track record since the SPECTRA era, with high reliability. Compatible with a variety of inks (functional liquids) including water-based, solvent-based, and UV-based. Features include large droplet and high-temperature compatibility. Examples of adoption not only in the graphic field but also in various industrial sectors.
The distance between the camera head and the work can be compressed to 1/3! Customized design for work distance tailored to the target.
It is a high-resolution CCD optical head for machine vision.
This is the most powerful 2-axis head in its class, equipped with the highest level of precision and dynamic performance for 5-axis machining.
Founded in 1923, we will reach 100 years in business in 2023. We are a top supplier of motor spindles, direct drive two-axis heads, and tilting tables for the machine tool industry. 【Features】 ■ Individual specification settings through modular design ■ Robust design with integrated fork structure ■ Achieving precise machining accuracy through high positioning precision ■ High productivity with high-speed tilting and high-torque spindles ■ High clamping torque / A-axis ■ Adoption of the latest powerful COOL MOTION motor for the A-axis ■ High torque design / C-axis ■ Secondary cooling within the C-axis to minimize thermal effects on the head section ■ Advanced maintainability with easily replaceable wear parts on-site ■ LED lighting for the tool area with high safety (optional) ■ Spindle shaft clamp for turning operations (optional)
