Last Updated： Aggregation Period:May 06, 2026～Jun 02, 2026
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:May 06, 2026～Jun 02, 2026
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:May 06, 2026～Jun 02, 2026
This ranking is based on the number of page views on our site.
91～120 item / All 491 items
A compact coating head suitable for high-speed applications!
"SEMPRE 6" is a cold glue dispensing head that can non-contact dot apply, bead apply, and continuously pattern apply low-viscosity emulsion adhesive. Compact size: Width 14.8mm / Height 85.1mm *For more details, please download the PDF or feel free to contact us.
High-precision electric cold glue coating head
High precision from start to finish in coating. Presto is a coating head for high-quality cold glue flat application that starts with high precision and can achieve accurate cutouts. It is ideal for applications such as clean adhesion of windowed envelopes and paper shopping bags. The application width and pattern can be easily changed with the nozzle mask. With an electric drive and minimal wear, Presto keeps operating costs low. The coating head is compact and can be easily integrated into new or existing systems.
FKV achieves large-area hot melt coating with precise application weight.
The FKV coating head continuously and uniformly coats wide surfaces with thermoplastic adhesives or reactive adhesives. Even at dynamic production speeds, it consistently achieves precise application weights. Closed or open hot melt surface coating on various substrates is performed using the contact method. The coating head is modular and available in various sizes, with a maximum application width of 3,200 mm.
Edge banding, hot melt coating head specifically for edge banding machines.
EdgePro is a coating application head designed for bonding the edge parts of workpieces. This application head achieves high-quality adhesion through uniform and highly reproducible adhesive application and clean cutouts. EdgePro quickly and flexibly adapts to the thickness of the workpiece and is easy to clean, contributing to increased productivity. With EdgePro, you can handle heat-resistant, waterproof adhesives such as EVA, polyolefin, and PUR hot melt adhesives with a viscosity of 10,000 to 100,000 mPas. The EdgePro coating head is primarily used in the woodworking industry for edge bonding.
Coating application head "RobaCoat IT" that achieves high-precision and uniform hot melt coating.
The RobaCoat IT coating application head is an ideal hot melt head for precise coating application in both intermittent and continuous hot melt coating. Its high-performance valve and specially designed nozzle structure provide excellent cut-off performance even on high-speed lines. Additionally, by changing the shim, it is possible to apply various patterns.
Introducing "single-layer" for quick and easy dimension changes and "multi-layer" for long-term production cycles!
We would like to introduce our single-layer and multi-layer PVC pipe heads, 'spider NG'. With an optimized flow path design, the "single-layer" achieves excellent material flow and the highest level of pipe quality, while the "multi-layer" is available for pipes ranging from OD32mm to OD250mm. Please feel free to contact us when you need assistance. 【Features】 <Single-layer> ■ Over 1000 types of PVC pipe heads sold ■ Compatible with pipes from OD6mm to OD630mm ■ Twin strand processing for pipes up to OD160mm ■ Achieves excellent material flow and the highest level of pipe quality *For more details, please refer to the PDF document or feel free to contact us.
Depending on the wire diameter, there are 4 types available for general use and 2 types for fluororesin!
The "Non-adjustable Core Crosshead" is an auxiliary device for wire coating that allows for flow path design according to the resin used. In addition to the single-layer type, we also offer two-layer and three-layer types to accommodate stripes and skin layers. Depending on the wire diameter, you can choose from 4 types for general use and 2 types for fluororesin. 【Features】 ■ Flow path design is performed according to the resin used, compared to commercially available non-adjustable core crossheads. ■ In addition to the single-layer type, we also provide two-layer and three-layer types to accommodate stripes and skin layers. ■ Fluororesin types made with corrosion-resistant metals are also available. ■ Depending on the wire diameter, you can select from 4 types for general use and 2 types for fluororesin. *For more details, please refer to the PDF materials or feel free to contact us.
Flagship model "TMEZ-KC" for completed embroidery with AI features, multi-head/cylinder type.
The TMEZ-KC is Tajima's flagship model equipped with the latest technology, featuring a multi-head/cylinder type. It is suitable for logo and mark processing on finished products such as small to medium-sized sports uniforms and hats. Standard features include Tajima's AI technology i-TM and automatic fabric presser DCP. This allows for optimal embroidery production without cumbersome adjustments, achieving precise and beautiful finishes for both beginners and experienced users. 【Achieving high-quality and stable stitching with AI technology "i-TM" and automatic fabric presser "DCP"】 POINT 1. Consistently produces the highest quality embroidery POINT 2. Significantly improves productivity compared to conventional machines POINT 3. Minimizes quality defects POINT 4. Accelerates operator training ▶ For more details on AI technology "i-TM" and automatic fabric presser "DCP," visit here: https://www.tajima.com/jp/product/i-tm/ *For more information, please visit the site or feel free to contact us.
A remote-controlled electric gimbal with a strong shock-resistant aluminum body that can accommodate commercially available compact cameras.
The RH201 is a durable remote-controlled electric pan-tilt head suitable for video production. It is the quietest head in Orion Giken's series, achieving a noise level of 24dB during operation. It can accommodate small CCD cameras, professional video cameras, and consumer video cameras. Additionally, its strong aluminum body is shock-resistant, making it convenient for transport and effective for long-term use. The mounting method allows for installation at any angle, including on telescopic poles, tripods, or suspended setups, and custom mounting brackets can be made to suit the customer's needs.
Products banded with a minimum size of 300×20mm and a maximum size of 2500×3000mm!
The "M100 type" is a seal-less binding head for the FROMM company's "AM100 type automatic steel strap bundling device." It is hydraulic, lightweight, and compact. It has a capacity of 120mm/s and a maximum of 9000N, allowing for fast and powerful bundling. It can bundle products ranging from a minimum of 300×20mm to a maximum of 2500×3000mm. The automatic bundling device is a made-to-order product tailored to the customer's specifications. For more details, please contact us. 【Features】 ■ For FROMM company's "AM100 type automatic steel strap bundling device" ■ Hydraulic, lightweight, and compact ■ Capacity of 120mm/s and a maximum of 9000N ■ Capable of fast and powerful bundling ■ Can bundle products from a minimum of 300×20mm to a maximum of 2500×3000mm *For more details, please refer to the PDF document or feel free to contact us.
Products bound with bands from a minimum of 200×100mm to a maximum of 2500×3000mm!
The "MH200 model" is a seal-less binding head for the FROMM "Automatic Steel Strapping Machine AM100 model." This pneumatic product has a capacity of 120mm/s and up to 9000N, enabling fast and powerful tightening and strapping. It can strap products ranging from a minimum of 200×100mm to a maximum of 2500×3000mm. The automatic strapping machine is a made-to-order product tailored to customer specifications. Please contact us for more details. 【Features】 ■ For FROMM's "Automatic Steel Strapping Machine AM100 model" ■ Pneumatic ■ Capacity of 120mm/s and up to 9000N ■ Capable of fast and powerful tightening and strapping ■ Can strap products from a minimum of 200×100mm to a maximum of 2500×3000mm *For more details, please refer to the PDF document or feel free to contact us.
Manufacturing output housings through unique optical design for various applications such as cutting, welding, hardening, and cleaning.
We propose a total optimal optical system with unique optical design as our core technology, from the laser oscillator to the processing point. We can accommodate all types of light sources, from long-wavelength CO2 to IR, green, UV, and excimer, for both thermal and non-thermal processing, and we can also handle high output (up to 50kW). Additionally, we can propose various optical systems using our unique technology: ------------------------------- - DOE (Diffractive Optical Element) - Imaging optics (mask) systems - Beam rotators - Rectangular beams, elliptical optical systems - High-performance fθ lenses - Core beams, etc. ------------------------------- We handle everything from the design of processing surfaces of various shapes (square, elliptical, etc.) to profile control. *For more details, please refer to the PDF materials or feel free to contact us.
It is particularly suitable for sanitary applications! The head rotates due to the flow of the cleaning solution, and the fan-shaped spray pattern reaches every corner of the container.
The rotating spray head "SaniMidget" offers high efficiency, replacing traditional low-pressure, low-flow fixed spray balls. It is particularly suitable for sanitary applications and can be used in tanks with capacities ranging from 0.1 to 10 m³ (27 to 2,700 US gallons). The flow of the cleaning solution causes the "SaniMidget" head to rotate, creating a fan-shaped spray pattern that reaches every corner of the container. This generates a flow that combines oscillating impact and the movement of the solution along the inner walls of the tank or reactor. The self-cleaning function ensures that the cleaning solution reaches the rotating bearing track and the elongated neck of the head. Available spray patterns include 360°, 270° up, and 180° down. For more details, please contact us or download the catalog.
We will perform impact cleaning with a 3D specified pattern. It has been particularly successful in the brewing industry worldwide!
The self-cleaning rotary jet head "TZ-74" performs impact cleaning with a 3D specified pattern. This device serves as a guarantee means to ensure the quality of tank cleaning in an automatic system. It is suitable for processes, storage, and transport tanks and containers ranging from 50 to 500 m3 (13,000 to 130,000 US gallons). When used in brewing, food, and dairy industries, automatic cleaning of the device and downpipe is strictly required, and the "TZ-74" has achieved particularly good results in the brewing industry worldwide. In terms of operation, the nozzle rotates around vertical and horizontal axes in a geared manner due to the flow of the cleaning liquid. First, the nozzle draws a coarse pattern on the inner surface of the tank, and then the pattern spacing gradually becomes denser until a complete pattern is achieved through 8 cycles of circulation. By selecting the diameter of the nozzle, the length and flow rate of the jet impact at the required pressure can be optimized. For more details, please contact us or download the catalog.
Reduce water and chemical usage with low flow! Alfa Laval's rotary spray cleaning machine.
SaniMicro is a rotary spray cleaning machine that sprays cleaning solution across the entire surface of the tank. It can be used at low flow and low pressure, making it an effective cleaning machine to replace traditional fixed spray balls. 【Performance】 ■ Lubrication: Self-lubrication with cleaning solution ■ Maximum reach: 2.5m ■ Impact cleaning distance: Up to 0.6m 【Pressure】 ■ Operating pressure: 0.1 to 0.3 MPa ■ Recommended operating pressure: 0.2 MPa *For more details, please refer to the PDF available for download.
We manufacture hydrogen injection engines for research, experiments, and educational materials aimed at educational institutions.
We have completed the cylinder head for the EH12 engine made by Robin, which can directly inject hydrogen. Originally developed for use as a general-purpose engine, it is utilized for tasks such as pesticide spraying during agricultural work and driving pumps for high-pressure washers. While gasoline is typically used as fuel, this time it has been changed to hydrogen for operation, leading to this development. 【Cylinder Head Features】 ■ A unit located at the top part of the engine ■ It controls the intake and exhaust of air flowing inside ■ Hydrogen is injected and ignited during the compression of air by the piston *For more details, please refer to the PDF materials or feel free to contact us.
A head optimized for showers and outlets with a damage prevention and snag prevention structure!
The "Rada LR Head" is designed to be embedded in the surface of the mounting wall and features an anti-hook design. It has a structure that prevents damage and hooking, making it suitable for shower heads or outlets with minimal protrusion. Additionally, it is equipped with an 8l/min spray cartridge, providing a stable and efficient shower experience. The combination with the "LR Sensor" and "Rada Monocontrol" is optimal. 【Features】 ■ Designed to be embedded in the surface of the mounting wall ■ Damage prevention and anti-hook structure ■ Provides a stable and efficient shower ■ Includes a 5l/min flow straightener for the outlet ■ Ideal for prisons and mental health facilities *For more details, please refer to the catalog or feel free to contact us.
![SUS316 Head [Machining + Wire Cutting Process Buff Finish]](https://image.mono.ipros.com/public/product/image/f84/2000529155/IPROS36673876980873048346.jpeg?w=280&h=280)
Composite processing of machining and wire cutting. The suction part was finished by buff polishing.
This product is a head used in lithium-ion battery manufacturing equipment. The material used is SUS316. This product has undergone composite processing through machining and wire cutting. The suction part has been finished with buff polishing. Our company is capable of not only machining but also wire cutting. Additionally, we offer surface finishing such as buff polishing. Please feel free to contact us.
The hair is stiff and the body is sturdy.
The brush body is made of solid polypropylen, and the filaments are made of polyester for tufting. Its durability reduces the risk of foreign matter contamination. It also prevents the growth of fungi and has excellent hygiene properties.
Microbubble Shower "BU-BU" Easy-to-use microbubble shower for home; just place the head in the bathtub for a microbubble bath too!
Easy to install, it minimizes the reduction of shower water pressure. Microbubbles are generated at the source of the shower hose. Even if the shower head is placed in the bathtub, microbubbles will be produced, allowing for a microbubble bath. The cleaning effects and heat-retaining and moisturizing benefits of microbubbles have already been a topic of discussion on TV and the internet. It is an eco-friendly and reasonably priced microbubble shower.
The heating head HDR-0670 is a heating head compatible with plastic cards that are 54mm wide.
The heating head HDR-0670 is a heating head with a thick film heater that accommodates plastic cards with a width of 54mm. It can be driven by DC24V, making it easier and safer to integrate into setups compared to heating rollers that operate on AC100V to 240V. Unlike heating rollers that maintain high temperatures constantly, the heating head uses on-demand heating, raising the temperature only when necessary, which saves energy. Additionally, it enables real-time control that increases energy only when cards pass through, even when cards are continuously passing at regular intervals. The surface of the heater is made of durable ceramic, and you can choose a surface coating material according to your needs.
Easy-to-remove single-use pump head! Reduces contamination risk with a self-contained magnetic bearing.
The "PuraLev 2000SU (Single Use)" is a revolutionary pump series that does not have bearings that may wear out and does not use shaft seals that may leak. Based on the principle of magnetic levitation, the pump impeller floats non-contact within a sealed casing and is driven by the rotating magnetic field of the motor. The single-use pump head adopts a bayonet-type socket mechanism, allowing for intuitive and easy attachment and detachment. 【Features】 ■ Low shear characteristics ■ Reduced contamination risk due to self-contained magnetic bearings ■ Pump that does not generate particles ■ Does not create excessive pressure situations compared to roller pumps ■ The gap between the impeller and casing is not narrow enough to trap bacteria *For more details, please refer to the PDF document or feel free to contact us.
Capable of handling load ranges from 1 to 1,000 N; high-precision control is possible using an integrated head of an air cylinder and VCM.
● Capable of a wide range of load control <Supports load range (1 to 1,000N)> *For loads below 1N or above 1,000N, please consult separately. ● Capable of fine position control <Positioning control with a resolution of 1μm> ● A wide variety of communication specifications <Ethernet, RS232C, CC-Link…etc> ● Energy-efficient and low heat generation <Controlled by air, resulting in energy savings and low heat generation> ● Customized design to meet your requirements <Designs tailored to your needs for both software and hardware configurations are also available>
For the machine tool industry! Turret head machined from dense bar round stock.
The "Turret Head for NC Lathes" is a product for the machine tool industry, machined from dense bar stock. After being machined from round bars using a multi-tasking lathe (5-axis), it undergoes end face grinding and outer and inner diameter grinding, followed by high-precision finishing of the tool mounting surface with horizontal machining. Since it is a component used in visible areas of NC lathe operators, careful inspection for scratches and rust is necessary. Therefore, it is a high-precision machined product that undergoes full inspection with a three-dimensional measuring machine for dimensional control. 【Features】 ■ Material: Equivalent to FCD450 (dense bar) ■ Industry: Machine tools ■ Machining equipment: Multi-tasking lathe (5-axis), horizontal rotary grinding machine, vertical multi-grinding machine ■ Precision: Coaxiality 0.005, roundness 0.005, parallelism 0.005, perpendicularity 0.05, positional accuracy 0.005, pitch ±0.005, surface error 0.005 ■ Work size: Φ340×100 *For more details, please refer to the PDF document or feel free to contact us.
Spindle head with a specification of 30,000 RPM! Demonstrates high precision with coaxiality and perpendicularity of 0.003 millimeters.
The "high-speed rotating spindle head" demonstrates precision with a coaxiality, perpendicularity, and parallelism of 0.003 millimeters at a specification of 30,000 RPM. *For more details, please refer to the PDF document or feel free to contact us.*
High efficiency that replaces conventional low-pressure, low-flow fixed spray balls.
The rotating spray head "Toftejorg SaniMidget" offers high efficiency, replacing traditional low-pressure, low-flow fixed spray balls. It is particularly suitable for sanitary applications and can be used in tanks with capacities ranging from 0.1 to 10 m³ (27 to 2,700 US gallons). The mechanism operates by the flow of the cleaning solution, causing the Toftejorg SaniMidget head to rotate, creating a fan-shaped spray pattern that reaches every corner of the container. This generates a flow that creates a swinging impact and cascades down the inner walls of the tank or reactor. The self-cleaning feature ensures that cleaning solution reaches the rotating bearing track and the neck of the elongated head. For more details, please download the catalog.
Rotary spray head that saves water and chemical usage with low flow rate.
The rotating spray head "Toftejorg MultiMidget" releases cleaning liquid with impact all around. This device, which can be used with low-pressure and low-flow cleaning liquids, has advantages over traditional fixed spray balls. The rotating head of the Toftejorg MultiMidget is supported by double ball bearings, making it suitable for cleaning applications in tanks, reactors, containers, and other storage vessels, with a cleaning radius and level ranging from 0.1m³ to 10m³ (27-2,700 US gallons). Size/type and installation diagrams can be obtained from the Alfa Laval CAS tools for tank cleaning equipment. For more details, please download the catalog.
Cleaning in 3D with the impact of the specified pattern within the set time.
The rotating spray head "Toftejorg MultiJet 25" performs 3D cleaning with a specified pattern impact within a set time. The need for cost-effective impact cleaning using a rotating jet head is suitable for applications where compliance with hygiene design standards takes precedence. It is designed to operate under conditions where cleaning fluids containing particles are recirculated within the cleaning equipment. For more details, please download the catalog.
Cost-effective impact cleaning using a rotary jet head.
The rotating jet head "Toftejorg MultiJet 40" performs cleaning in 3D with impacts in a specified pattern within a set time. The need for cost-effective impact cleaning using a rotating jet head is suitable for applications where compliance with hygiene design standards takes precedence. It is designed to operate under conditions where cleaning fluids containing fibers and particles are recirculated within the cleaning equipment. For more details, please download the catalog.
High-speed and effective impact cleaning
The rotating jet head - portable "Toftejorg TZ-66" performs cleaning in 3D with impacts of a specified pattern within the set time. It serves as a guarantee means to ensure the quality of tank cleaning with an automatic device. The Toftejorg TZ-66, used in brewing, food, and dairy industries, is particularly suitable for small applications that require high impact. For more details, please download the catalog.
