Last Updated： Aggregation Period:Jun 24, 2026～Jul 21, 2026
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Jun 24, 2026～Jul 21, 2026
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Jun 24, 2026～Jul 21, 2026
This ranking is based on the number of page views on our site.
91～120 item / All 255 items
Seeing the future of magnets.
Plastic magnets refer to magnets made from plastic material. They are expected to be used in situations where regular magnets cannot be used. Conveniently, various types of magnets can be powdered and mixed together, and the resulting bonded magnets, when kneaded with rubber and other materials, are sometimes referred to as plastic magnets.
Heat-resistant and easy to process into various shapes magnets.
Iron-chromium-cobalt magnet (Fe-Cr-Co magnet) is a type of magnet cast from iron, chromium, and cobalt as the main components. It was developed in 1971 by Kaneko at Tohoku University in Japan. Due to its ductility and malleability, it can also be processed into thin sheets and fine wires.
Magnet (magnet) with strong magnetic force D10X3 NdFeB
φ10*3 N35 surface magnetic flux density: 255-280mT φ10*3 N38 surface magnetic flux density: 265-291mT
A magnet with the strongest magnetic energy, which has a relatively large change in magnetic force with temperature.
Nickel-copper-nickel three-layer plating Tolerance: +/-0.05mm Comparison with Japanese-made magnet magnetic properties: Please contact us.
1: It has a high magnetic flux density and very strong magnetic force. 2: It is often plated with nickel because it is prone to rust.
1: It has a high magnetic flux density and very strong magnetic force. 2: In addition to being mechanically fragile, it has a significant temperature variation in magnetic force. 3: When heated, it is prone to thermal demagnetization. Adding dysprosium improves the coercivity. It is said that adding 1% of dysprosium improves thermal demagnetization by 15°C. 4: It is often plated with nickel because it is prone to rust. 5: The Curie temperature is about 310 degrees. 6: The strength of the magnetism is graded from N24 to N54. The number following the N indicates the strength of the magnetism, and theoretically, it is said to be possible to reach N64.
These are mechanical components used in OA equipment, medical devices, measuring instruments, machine tools, and communication devices.
We use a flexible material that does not chip or crack, and it has excellent workability.
Long-lasting for the transportation of scrap and waste materials! Lifting magnets with strong magnetic force and energy-saving design.
The "CEL-L Series" is a metal recycling material transport equipment suitable for the transportation and loading/unloading of iron scrap, slag, ingots, and other iron masses and debris. It features strong magnetic force and an energy-saving design. With its robust construction, it also has a long lifespan for the transport of scrap and waste materials through adhesion. Additionally, we can provide design and construction proposals for power supply methods according to application, designated space for power panels, variable output voltage functions, and uninterruptible power supply systems. Please feel free to consult us. 【Features】 ■ Strong magnetic force and energy-saving design ■ Electromagnetic coils are H-class insulated ■ Robust construction ensures long lifespan for the transport of scrap and waste materials through adhesion ■ Design and construction proposals for power supply methods, designated space for power panels, variable output voltage functions, and uninterruptible power supply systems are also available *For more details, please refer to the PDF materials or feel free to contact us.
Perfect for removing metal foreign objects! It powerfully catches metal foreign objects with a high magnetic force magnet.
The high magnetic force magnet "KMO-110" is a type of magnet that is installed on the outside of rice grain pipes in rice milling factories. It powerfully captures metal foreign objects with its high magnetic force. Since it is mounted on the outside of the pipe, removing the captured metal foreign objects is also easy. Additionally, because the magnet does not come into direct contact with the rice, it does not disrupt the flow of rice and there is no sticking of bran. 【Features】 - Strong adsorption with a high magnetic force magnet bar - Can be installed on the outside of existing rice grain pipes - Does not disrupt the flow of rice and has no sticking of bran - No tools required for installation and removal - Captured metal foreign objects can be easily removed For more details, please contact us or download the catalog.
A proposal for metal foreign object removal born from new ideas! Patent obtained.
The "High Magnetic Force Magnet KMO" is a high magnetic force magnet bar designed for the removal of metal foreign objects, capable of strongly attracting them. It can be mounted on the outside of existing sanitary piping or stainless steel piping without disrupting the flow of transported materials. No tools are required for installation or removal, and the attracted metal foreign objects can be easily removed. 【Features】 ■ Strong attraction with a high magnetic force magnet bar ■ Can be mounted on the outside of existing sanitary piping ■ Does not disrupt the flow of transported materials ■ No tools required for installation or removal ■ Easily removes attracted metal foreign objects *For more details, please refer to the PDF document or feel free to contact us.
Contributing to the creation of safe products! It firmly catches metal objects with strong magnetic force.
The "KMG Series" is a high magnetic force magnet that can remove metal foreign objects more powerfully. It firmly catches metal objects with strong magnetic force and can be set up in various locations. Additionally, the length and combination of the magnets can be customized freely, allowing for flexible responses to customer needs. 【Features】 ■ Contributes to the creation of safe products ■ Can powerfully remove metal foreign objects ■ Can be set up in various locations ■ Length and combination of magnets can be customized ■ Flexible response to customer needs *For more details, please refer to the PDF document or feel free to contact us.
Clamp it! It can be attached! Rechargeable LED with adjustable angle【YC-1600M】
● Clip type that can be firmly clamped and fixed ● The N42 neodymium magnet on the bottom is a powerful magnet that can be securely fixed to iron surfaces! ● Supports work scenes with up to 24 hours of continuous lighting! ● Four selectable lighting modes to suit your needs! ● Easy to charge with Type-C charging! ● Dustproof and waterproof rating IP65! ● Impact resistance rating IK06!
It is also excellent in corrosion resistance and does not rust! It has a high magnetic retention and is difficult to demagnetize.
"Ferrite magnets" are magnets with a long history. They are widely used around the world today and are inexpensive because their main component is iron oxide. They have a high coercivity, making them resistant to demagnetization, and they also excel in corrosion resistance, meaning they do not rust. 【Features】 ■ Magnets with a long history ■ Inexpensive due to their main component being iron oxide ■ Widely used around the world today ■ High coercivity, resistant to demagnetization ■ Excellent corrosion resistance, does not rust *For more details, please refer to the PDF document or feel free to contact us.
Perfectly adheres to any shape! Removable and adjustable magnetic hand.
The "Lifting Magnet Pitta-kun" is a lifter magnet that conforms to the uneven shape of the workpiece on its adhesive surface. When not powered, the movable yoke can move freely up and down. Please use the convenient dedicated power supply LEC-2. 【Lineup】 ■LF-8N ■LF-16N ■LF-38N *For more details, please refer to the external link page or feel free to contact us.
We provide a consistent response within the factory for mass production processes, including material selection for automotive plastic magnets, mold design, tool development, injection molding, magnetization, and inspection!
Plastic magnets (bond magnets) used in automotive steering and switch areas, which incorporate magnetic sensors, are easier to handle, lightweight, and less affected by rust compared to metal sintered magnets, making them excellent in properties. The base resin materials can be selected according to applications and needs, including nylon-based and PPS, and complex shapes can be molded through insert molding and two-color molding. We can accommodate multipole magnetization and radial magnetization, providing comprehensive proposals for materials, properties, and shapes, and we will mass-produce them in domestic lines with proven mass production results.
It is a steel perforated board that increases desk space in a three-dimensional way. Multiple accessories are included.
This is a steel desk-mounted perforated board (punching board, pegboard). Since the board is made of steel, magnetic products can also be attached. It is secured with two clamps with protective pads, providing high stability. With a larger size of 41×31 cm, it can hold many items. It comes with multiple large trays, device trays, and hooks, allowing for a wide range of storage from stationery to devices. Both the front and back can be used simultaneously. It can be used on, under, or in between the desk. The structure is simple, making it easy for anyone to assemble. It features a matte black finish that reduces gloss.
We provide plastic magnets with reliable molding using advanced specialized technology.
Our "Plastic Magnet" can be manufactured in lightweight and complex shapes through resin molding. Since it can be machined, prototypes and similar items can be easily produced. Additionally, the magnets commonly used are called sintered magnets, which experience a decrease in magnetic strength due to rust, but our plastic magnets do not deteriorate from rust. Furthermore, they have a property that makes them less prone to cracking or chipping compared to sintered magnets, reducing the risk of damage to mechanical parts from fragments. 【Features】 ■ Quick response is possible through collaboration with partner companies (material manufacturers, mold manufacturers, magnetization manufacturers). ■ Utilizing our expertise in machining, we can also accommodate full machining. *For more details, please download the PDF or contact us.
The hand magnet is attached to the lid or side of the drum and is secured by magnetic force!
The "Q.Crodile Magnet X2" is a grounding magnet designed as a part that can be mounted on a flat surface. It can be used when safe grounding is necessary, but there is not enough space to install a grounding clamp. The two built-in tips connect to the bottom of a drum with just a slight rub of the hand, ensuring reliable grounding. Additionally, we also offer the "Q.Crodile CF-Magnet X2," which ensures safe grounding for unpainted small drums and containers. 【Benefits of Q.Crodile Magnet X2】 ■ Stainless steel metal parts ■ High-conductivity plastic used ■ Strong magnetic force ■ Quick connection possible *For more details, please download the PDF or feel free to contact us.
Designed as a simple grounding magnet! Made with highly conductive plastic.
The "Q.Crodile Magnet X1" is a grounding magnet suitable for situations where safe grounding of drums and containers is required, and there is limited space to attach a standard type grounding clamp. Its flat housing design allows it to be mounted on the top or side of a drum lid using magnetic force. The tips of the hand magnet (two locations) adhere simply by rubbing the painted surface of the drum's bottom slightly with your hand, ensuring reliable grounding. 【Benefits】 ■ Metal parts made of stainless steel ■ Use of highly conductive plastic ■ Strong magnetic force *For more details, please download the PDF or feel free to contact us.
We will flexibly respond to customer requests for rubber magnets, component sets, and assembled products.
We will flexibly respond to customer requests for rubber magnets, component sets, and assembled products. Daichi Kuma Japan Co., Ltd. is a Japanese subsidiary of Anhui Daichi Kuma New Materials Co., Ltd. (Earth-Panda), which is engaged in the research, development, manufacturing, and sales of rare earth permanent magnet materials such as neodymium magnets and samarium-cobalt magnets. In terms of quality, we have obtained certifications for TS16949, ISO 9001, and ISO 14001 (from our headquarters in China), and we are committed to daily production and improvement under stable quality management, confidently delivering high-quality products to our customers. Our products are widely used in various fields, including the information industry, defense industry, automotive industry, wind power generation, various types of electric motors, measuring instruments, medical devices, and magnetic machinery. We sell to over 20 countries and regions, including Europe, the United States, South Korea, and Japan, earning high trust from customers worldwide.
This product comes with a T-shaped handle and a powerful neodymium magnet. It can be used in various situations for fixing, attracting, and holding objects.
To enhance the adhesive force compared to a standalone neodymium magnet, the magnet is covered with a cap. By attaching the included non-slip rubber to the adhesive surface, it provides scratch prevention and a non-slip effect.
To enhance the adhesive force, the neodymium magnet is covered with an iron cap. It is a through-thread type and can be installed to match the screw size of the counterpart.
A product that comes with non-slip rubber, which can be attached to the adhesive surface to prevent scratches and provide a non-slip effect.
This product comes with an eye hook attached to a powerful neodymium magnet.
It can be used in various situations such as hanging or holding objects. To enhance the adhesive force compared to a standalone neodymium magnet, the magnet is covered with a cap. By attaching the included anti-slip rubber to the adhesive surface, it provides a scratch prevention effect.
This is an angle-adjustable bracket equipped with powerful neodymium cap magnets on both sides. It is effective for tasks such as assembly work and inspections when you want to adjust the angle.
The magnets come in four types with different sizes and suction strengths, allowing you to choose between left and right. The bracket can be adjusted to a 180-degree angle. By using the included knob, you can adjust the angle by hand (without tools). If you want to tighten it further, remove the knob and spacer, and use the included cross-recessed flat screws. Attaching the included anti-slip rubber to the magnet also helps prevent scratches.
This is a magnet holder with a lever handle attached to a powerful neodymium magnet.
Magnets can be selected based on their adhesive strength and size, and the lever is available in three colors. The neodymium magnet is covered with an iron cap to enhance its magnetic force while making it less prone to breaking. By attaching the included anti-slip rubber to the magnetic surface, it prevents scratches and provides a non-slip effect.
Small items and high precision are one of our company's strengths, and we can provide samples of magnets for free.
It is a sintered product mainly composed of neodymium (Nd), iron (Fe), and boron (B), and it has the highest magnetic energy among current magnets. Due to its tendency to oxidize, surface treatment is generally required depending on the application and usage environment. Neodymium magnets are the strongest among magnets. The change in magnetic force with temperature is relatively large, so appropriate shape and grade selection is necessary for high-temperature use.
Full color with vibrant photos. Can be used long-term with UV-cut laminate.
We offer outdoor magnets recommended for vehicle advertising and sales vehicles. "We have a design concept but can't layout it well." "I have the logo and materials, but I'm not good with computers and find it difficult to create the data," etc. Based on your ideas and discussions, we will create design data for you free of charge. Please feel free to consult us. *There may be a fee in some cases. 【Features】 ■ 0.8mm thick magnet sheet ■ UV-cut laminate protects against UV rays, water, and scratches, allowing for long-term use ■ When applied without gaps on a flat surface, it can withstand high-speed driving ■ Full-color printing allows for multi-color use and photo printing ■ Rounded corners and contour cutting are also available ■ Inkjet printing allows for orders starting from one piece, etc. *For more details, please download the PDF or feel free to contact us.
This is an ideal lifting magnet for moving steel materials such as flat bars and round bars, as well as jigs and molds.
You can easily turn the magnet on and off with one hand.
Development, manufacturing, and sales of various magnetic components primarily using bond magnets and recycled magnetic powder.
We will perform magnet design based on numerous achievements using magnetic field analysis with the finite element method.
