mineral Product List and Ranking from 18 Manufacturers, Suppliers and Companies

Powdered illite

Mica viscosity mineral - Illite. Free samples are available!

"Ilight" is a type of intermediate mineral between mica and kaolin/montmorillonite suspensions, and it is non-expandable. It has a fine flake structure, excellent suspendability and dispersibility, moisture retention as a functional filler, and high shear flowability. It is widely used in various industries such as paints, resins, rubber, ceramics, and paper, as well as in the fields of feed and agriculture.

Company：伸工貿易本社
Price：Less than 10,000 yen

plastic
Rubber
mineral

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Mineral "Zeolite"

Aluminum hydrous silicate minerals that contain water molecules as a main component in the form of crystalline water within their structure.

The name "zeolite" is derived from the Greek meaning "boiling stone" and is also referred to as "boiling stone" in another name. Zeolite is a hydrated aluminum silicate mineral that contains water molecules (H2O) as a main component in the form of crystal water within its structure. It was named because when heated suddenly, it foams and melts, appearing as if it is boiling. The crystal water in zeolite exists as water molecules within its three-dimensional network structure, which is why it is specifically called "boiling stone water." Even when dehydrated by heating, the structure of zeolite is not destroyed, and the areas where crystal water was present remain as cavities. This results in a sponge-like structure that has the characteristic of strongly adsorbing gases and moisture again into these cavities. **Features** - Even when dehydrated by heating, the structure of zeolite is not destroyed, and the areas where crystal water was present remain as cavities, which have the property of strongly adsorbing gases and moisture again. - The cation exchange capacity is not affected by the surrounding environment (such as pH) and has the property of sustaining this ability over a long period. - It is an effective and beneficial material for purifying the earth, water, and air through the adsorption of pollutants. *For more details, please contact us or download the catalog.*

Company：日東粉化商事
Price：Other

Other consumables
mineral

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

High Purity Sodium Montmorillonite "Kunipia"

It has high viscosity, swelling properties, and thixotropic properties.

"Kunipia" is a refined and commercialized form of clay known as bentonite. Bentonite is said to have "a thousand uses" and is utilized in a wide range of industries and in our everyday lives. It has various characteristics such as expanding to several times its volume when absorbing moisture, possessing strong viscosity, not settling even after long periods, and being gentle on the human body. Kunipia enhances these properties, making it easier to use. 【Features】 - High viscosity, swelling capacity, and thixotropic properties - Safe, non-decaying, and stable inorganic colloid - Capable of creating promising interlayer compounds For more details, please contact us or download the catalog.

Company：クニミネ工業
Price：Other

Other polymer materials
mineral

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Tohoku Univ. Technology : Carbon dioxide fixation method : T20-1059_T23-099

Contributing to carbon neutrality through CO2 fixation technology using Ca/Mg-containing wastes as raw materials! Related patents (1/2)

The CO2 fixation technologies so far typically employ alkaline earth metals to fix CO2 by converting it into chemically stable carbonate minerals. However, the conventional technologies are difficult to apply on a large scale because of its slow reaction rate, high cost and potential environmental concerns due to the use of a large amount of pH adjusters. 　This invention discloses a novel CO2 fixation process that enables to run under 100°C and ambient pressure without using large amounts of pH adjusters. It can run continuously at low cost by regenerating and recycling of the chelating agent (e.g., GLDA) solution within the process. This invention also enables the production of high-purity carbonates, such as CaCO3, and oxides, such as silica, by using Ca/Mg-containing wastes, including combustion ash, waste concrete, and slag, as Ca/Mg sources. The chemicals obtained in this sustainable CO2 fixation technology, such as CaCO3, are expected to be used in industries such as pigments, rubber, and desiccants.

Company：Tohoku Techno Arch Co., Ltd.
Price：Other

others
mineral

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Clay mineral "Capim Kaolin"

Very fine and flat particles of clay minerals.

"Capim Kaolin" is a clay mineral that originates from the hydrothermal decomposition of rocks. It is characterized by its main component, hydrated aluminum silicate, and its very fine and flat particles. Our company handles wet kaolin, which is used not only for papermaking but also in paints, adhesives, and rubber and plastic fillers. [Features] - Main component: hydrated aluminum silicate - Very fine and flat *Please feel free to contact us for more details.

Company：アルテミンスペシャリティーズジャパン製紙事業部
Price：Other

Organic Natural Materials
mineral

View product details

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Mineral "Talc"

Among minerals, extremely soft! Characterized by a smooth texture, it is a hydrophobic and lipophilic mineral.

Talc is an extremely soft mineral. It is electrically neutral and has a strong oleophilic surface. It also has lamellar crystals, which include fine ones (micro-lamellar) and flat lamellar crystals with a high aspect ratio. Each type of crystal has its own unique functionality and is used for specific applications. The talc products handled by Artemin are manufactured from high-purity, high-quality talc raw materials, maximizing the characteristics of talc. 【Features】 ■ Excellent reinforcement properties ■ Dimensional stability and thermal stability ■ Excellent gas barrier properties ■ Contribution to lightweighting ■ Crystal nucleation ■ Foaming nucleating agent *For more details, please refer to the PDF document or feel free to contact us.

Company：アルテミンスペシャリティーズジャパン製紙事業部
Price：Other

Organic Natural Materials
mineral

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Clay mineral "Miracle"

Our original product made from molded and processed input mineral sepiolite!

"Miracle" is a high-performance material processed from the naturally occurring clay mineral "sepiolite." It possesses three main characteristics: adsorption, thixotropy, and plasticity, and is used in applications such as adsorption in powder form, as a molding aid utilizing viscosity, and for deodorization, dehumidification, and filtration when molded. Our company handles products from two countries, Turkey and the United States, each with different characteristics and suitable for different applications, so please choose according to your usage conditions. [Features] ■ Excellent adsorption properties ■ Thixotropy ■ Plasticity as clay *For more details, please download the PDF or feel free to contact us.

Company：近江鉱業
Price：Other

Organic Natural Materials
mineral

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Natural nanotube mineral "Halloysite"

If used for coatings and coverings, adhesion strength can be increased by up to 8 times with various resins. Suitable for various applications such as paints, cosmetics, pharmaceuticals, resins, and adhesives!

Applied Minerals Inc. (AMI) 's Halloysite is a nano-tubular aluminosilicate clay mineral (kaolin clay). Normally, kaolin is produced in a plate-like form, but due to unique geological conditions, it has rolled into tubes. By utilizing the characteristics of halloysite's aspect ratio, tube shape, and chemical composition, we are confirming its potential for various applications. 【Effects in Paints and Coatings】 ■ Improvement of mechanical properties ⇒ Increased strength without losing flexibility or elongation ■ Protection of painted surfaces utilizing sustained release ⇒ Drugs are introduced into the tubes for prolonged effectiveness ■ Enhanced adhesion ⇒ Up to 8 times increased adhesive strength with various resins ■ Improved scratch resistance ⇒ Increased hardness and scratch resistance with polyurethane ■ Enhanced rust resistance ⇒ Sustained effectiveness through the release of anti-corrosive agents ■ High transparency *For more details, please refer to the PDF document or feel free to contact us.

Company：ファイマテック本社
Price：Other

others
Other polymer materials
mineral

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

【Mineral Supplementation】Characteristics of AQUA-PS in Water【Removal of Residual Chlorine and Others】

Removes residual chlorine and replenishes minerals. AQUA-PS keeps water always fresh.

AQUA-PS is a mineral that formed from the accumulation of suspended matter on the seabed between 550 million and 580 million years ago. Over a long period, the solidified layers were uplifted due to tectonic movements and surfaced. According to analysis of AQUA-PS, it is composed of more than 20 different elements, and it has been reported that 51 components can leach out when the ore is soaked in water for 24 hours. This includes rare elements such as niobium, strontium, zirconium, and vanadium. Among the ions that dissolve in water from AQUA-PS, calcium is the most abundant, and there is also a heat retention effect due to calcium ions. Additionally, AQUA-PS has the effect of removing residual chlorine, and research has shown that it can reduce an initial concentration of about 0.9 mg/L to less than half within 5 minutes. 【Features】 ■ Mineral supplementation ■ Heat retention effect from leaching ions ■ Residual chlorine removal, etc. *Samples and detailed materials can also be sent. For more information, please refer to the PDF document or feel free to contact us.

Company：エステート.コム　
Price：Other

Other medical supplies and cosmetic manufacturing materials
mineral

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Mineral "Talc (3MgO4SiO2H2O)"

Most of the particle surfaces are oleophilic, and they are flat particles! An introduction to minerals used in various fields.

"Talc" is a mineral with a soft, flat crystal structure, classified as a natural mineral known as talc. It is characterized by having a large portion of its particle surface being oleophilic and being composed of flat particles, which allows it to be used in various fields. High-quality talc raw materials are produced in China, Australia, the United States, and other countries, and further refined by importing materials from specific regions, grinding, and classifying them into products. 【Product Lineup (Partial)】 ■ PS-IC ■ PS ■ Snow ■ CS ■ S-1 *For more details, please refer to the PDF document or feel free to contact us.

Company：ソブエクレー
Price：Other

Stone Processing Machinery
mineral

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Mineral "Calcium Carbonate (CaCO3)"

We carefully select raw materials with unique characteristics from each production area and process them through our manufacturing steps of crushing and classification to create products!

Calcium carbonate is a mineral made from limestone, which is abundantly buried in the country. Depending on the various applications of calcium carbonate, we carefully select characteristic raw materials from different production areas and process them through our manufacturing process of crushing and classification to create products. Calcium carbonate flue gas desulfurization involves reacting a limestone slurry, which is calcium carbonate suspended in water, with sulfur dioxide gas in the flue gas to absorb it and recover it as gypsum. 【Product Lineup】 ■ST-200 ■ST-100 ■ST-50 ■ST-30 ■Sports Line ■Sports Line A *For more details, please refer to the PDF document or feel free to contact us.

Company：ソブエクレー
Price：Other

Stone Processing Machinery
mineral

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Mineral "Lightly Calcined Magnesite"

Crushed and micronized, it reacts with water to form magnesium hydroxide, which is used for flue gas desulfurization!

"Lightly calcined magnesite" is obtained by calcining magnesite at about 1000°C in a Chinese factory to produce MgO. This product is crushed and micronized, then reacted with water to produce magnesium hydroxide (Mg(OH)2), which is used for flue gas desulfurization. At Sobeclay Co., Ltd., we handle natural mineral grinding products such as talc, calcium carbonate, magnesite, lightly calcined magnesite, and clay, so please feel free to contact us when needed. 【Product Lineup】 ■ Lightly calcined magnesite KDB ■ Light mag A ■ Hydromag 35% slurry *For more details, please refer to the PDF document or feel free to contact us.

Company：ソブエクレー
Price：Other

Stone Processing Machinery
mineral

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Sobeclay Co., Ltd. Company Profile

Production capacity of up to 7000 tons per month! We possess various analytical instruments to ensure quality.

At Sobuekurē Co., Ltd., we handle natural mineral grinding products such as talc, calcium carbonate, magnesite, light-burned magnesite, and clay. We possess various analytical instruments primarily focused on chemical analysis (XRF), X-ray diffraction (XRD), and particle size measurement (laser diffraction, image analysis) to ensure quality. We have three locations: our headquarters, the Nagoya plant for talc production, and the Suzuka plant for flue gas desulfurization agent production, with a maximum production capacity of 7,000 tons per month. 【Products Offered】 ■ Talc ■ Calcium Carbonate ■ Magnesite ■ Light-Burned Magnesite ■ Clay, etc. *For more details, please download the PDF or feel free to contact us.

Company：ソブエクレー
Price：Other

Organic Natural Materials
mineral

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Greek-made Atapulgite

This is a fibrous mineral utilized in various binders and thickeners, taking advantage of its excellent adhesive properties. Please consider it as a source for reducing reliance on China.

* It has a porous clay structure with pore tubes (tunnels, conduits) aligned along the fiber direction, a large specific surface area, and applications that utilize its absorption and adsorption performance, as well as its colloidal and gel-like properties. * When heated and dried, it solidifies well and has high moisture absorption and odor absorption properties, making it widely used in Europe and the United States as cat litter (for cat toilets) and oil absorbents. * There are applications for adding it as a thickening agent and liquid drip prevention agent in paints, as well as for use in civil engineering drilling mud, pesticide carrier materials, and jointing agents. Please also visit our inorganic fine materials department's website.

Company：蝶理無機ファイン部
Price：Other

Ceramics
Composite Materials
Chemicals
mineral

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Mineral "Mica Powder"

A heat-resistant insulating mineral with excellent design qualities! Safe and stable delivery is possible through a simple supply chain.

"Mica powder" is a glossy mineral known as "Kira" in Japanese, and it is used as a filler in cosmetics, paints, rubber, plastics, and ceramics. Among them, white mica (hard mica) is particularly excellent in insulation performance, with a heat resistance of about 550°C. It is also used to improve rigidity, corrosion resistance, and vibration damping. Additionally, the feature of this product is that it is directly sourced from Indian manufacturers through a unique route, allowing our company to ensure safe and stable delivery through a simple supply chain. 【Chemical Composition】 ■SiO2 Silica: 51–56% ■Fe2O3 Iron Oxide: 1.5–3.5% ■Al2O3 Alumina: 20–24% ■K2O Titanium Dioxide: 7–9% ■MgO Magnesia: 0.06–0.08% *For more details, please refer to the PDF document or feel free to contact us.

Company：エクシード
Price：Other

Organic Natural Materials
mineral

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Natural mineral "silica sand"

Natural minerals that significantly improve the quality of the final product! A wide variety is available, allowing for selection based on intended use!

"Silica sand" is a natural mineral with a uniform particle shape, making it suitable for use as foundry sand, resulting in a beautiful casting surface. Due to its high melting point, excellent wear resistance, impact resistance, and high recyclability, it is used as foundry sand and as an abrasive in sandblasting. Additionally, when used as an aggregate in mortar and concrete, it can enhance strength and seismic resistance, while also suppressing the ionization tendency of metals, improving the corrosion resistance of buildings. It is often used in structures close to the sea and in bridges. 【Features】 ■ High melting point with excellent wear and impact resistance ■ High recyclability ■ Can improve strength and seismic resistance when used in building materials ■ Can also enhance the corrosion resistance of buildings ■ Uniform particle shape *For more details, please refer to the PDF document or feel free to contact us.

Company：エクシード
Price：Other

Organic Natural Materials
Other abrasives
mineral

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Natural mineral "clay"

Okayama Prefecture regional industrial resources! Natural minerals with adhesive properties.

"Clay" is a collection of fine particles that possess adhesive properties, primarily composed of natural minerals containing chemical components such as silicon, aluminum, magnesium alkali metals, alkaline earth metals, and moisture. Our "Clay" refers to a white powdery product that has been industrially refined from natural ore, primarily consisting of hydrated aluminum silicate. [Definition (must be a natural substance)] ■ Possesses adhesive properties ■ A collection of fine particles *For more details, please download the PDF or feel free to contact us.

Company：山陽クレー工業
Price：Other

Organic Natural Materials
Other polymer materials
mineral

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Natural minerals: The warming characteristics of AQUA-PS (sauna, stone bath, etc.)

Warm to the core with far infrared rays and abundant minerals, preventing chills!

AQUA-PS is a mineral that formed from the accumulation of suspended matter on the seabed between 550 million and 580 million years ago, which solidified and was uplifted to the surface due to geological changes over a long period of time. According to analysis of AQUA-PS, it is composed of over 20 different elements, and it has been reported that 51 components can leach out when the ore is soaked in water for 24 hours. This includes rare elements such as niobium, strontium, zirconium, and vanadium. AQUA-PS has the effect of removing residual chlorine, and when used in a bath, it can prevent skin irritation caused by residual chlorine and soften the skin and keratin. Additionally, it has a double warming effect from the minerals such as leached calcium and far-infrared rays, which warms the body from the core and prevents the bath from cooling down. When used in a sauna, it is also expected to eliminate the odor of sweat that accumulates indoors, creating a refreshing indoor environment. 【Features】 ■ Residual chlorine removal ■ Far-infrared effect ■ Warming effect ■ Deodorization, etc. *Samples and detailed materials can also be sent. Please feel free to contact us.

Company：エステート.コム　
Price：Other

others
mineral

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Mineral "Magnesite (MgCO3)"

Mainly produces high-quality raw stones in China! Usable for ceramics, glass, and glazes.

"Magnesite" is a natural magnesium carbonate that is primarily produced in high-quality raw stone from China. It can be used in ceramics, as well as in glass and glazes. At Sobeclay Co., Ltd., we handle natural mineral grinding products such as talc, calcium carbonate, magnesite, light-burned magnesite, and clay, so please feel free to contact us when needed. *For more details, please refer to the PDF materials or feel free to contact us.

Company：ソブエクレー
Price：Other

Stone Processing Machinery
mineral

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

【English Market Research Report】Global Market for Dolomite Mining

"Free samples" are currently being offered! Please check the application method from the [PDF download] button, or apply directly from the related links.

The global market size of dolomite mining was valued at 1.9 billion USD in 2022, and it is expected to grow from 1.97 billion USD in 2023 to 2.66 billion USD by 2031, with a projected CAGR of 3.80% during the forecast period (2024-2031). Dolomite is a variety of limestone characterized by its high content of the dolomite mineral, which makes up about 2% of the Earth's crust, and it appears in various colors such as colorless, white, buff, pink, and bluish crystals. Typically, it is granular and exhibits shades ranging from light gray to dark gray, brown, and white. The increasing demand for dolomite as a construction aggregate and raw material for cement production is driving the expansion of the market.

Company：グローバルインフォメーション
Price：500,000 yen-1 million yen

Other services
mineral

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Product: MagniF "Maguniefu" Magnetite [Friction Material / Sliding Properties]

There are various types of fillers used in automobile brake pads! One of them is magnetite. Our product is natural and can reduce costs.

Our magnetite (MagniF) is magnetite that has been mined, micronized, and dried in Sweden. Magnetite (MagniF) is one of the components that equalizes the friction coefficient and the heat transfer from brake pads to brake discs. Since it is a natural product and not a synthetic one, cost reduction is possible! If you are looking for magnetic fillers or high-density fillers, please give it a try! Feel free to download for more detailed information. 　　　　　　　　　↓↓↓↓↓↓↓

Company：レプコ本社工場
Price：Other

Organic Natural Materials
magnet
Engineering Plastics
mineral

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

[Research Material] The Global Market for Magnesium Carbonate Minerals

World Market for Magnesium Carbonate Minerals: Magnesite, Hydromagnesite, Pharmaceuticals & Personal Care, Chemicals, Others

This research report (Global Magnesium Carbonate Minerals Market) investigates and analyzes the current state and outlook for the global magnesium carbonate minerals market over the next five years. It includes information on the overview of the global magnesium carbonate minerals market, trends of major companies (sales, selling prices, market share), market size by segment, market size by major regions, and distribution channel analysis. The market segments by type focus on magnesite and hydromagnesite, while the segments by application cover pharmaceuticals and personal care, chemicals, and others. The regional segments are divided into North America, the United States, Europe, Asia-Pacific, Japan, China, India, South Korea, Southeast Asia, South America, the Middle East, and Africa to calculate the market size of magnesium carbonate minerals. It also includes the market share of major companies in the magnesium carbonate minerals sector, product and business overviews, and sales performance.

Company：マーケットリサーチセンター
Price：Other

Other services
mineral

View product details

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

【English Market Research Report】Global Market for Dolomite Mining

"Free samples" are currently being offered! Please check the application method from the [PDF download] button, or apply directly from the related links.

The global dolomite mining market size reached approximately 15.23 billion USD in 2022 and is expected to grow at a healthy rate of over 2.6% during the forecast period from 2023 to 2030. Dolomite is a carbonate mineral rich in magnesium, calcium, and iron, serving various industrial purposes. It is used in the manufacturing of ceramics, glass, and refractories, and also plays a role in environmental conservation, energy efficiency, and chemical manufacturing processes. Dolomite is utilized in applications such as construction materials, agriculture, feed, ceramics and glass, steel, plastics, and paints and coatings. In dolomite mining, the mineral calcium magnesium carbonate is extracted from the strata. The increase in global infrastructure and construction projects, the rising use of dolomite in agriculture, and the growing demand from the steel and glass sectors are the main factors driving market growth worldwide.

Company：グローバルインフォメーション
Price：500,000 yen-1 million yen

Other services
mineral

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Shield mud slurry material "TG Clay"

Economical products with excellent running costs! Environmentally friendly inorganic minerals.

"TG Clay" is an inorganic mineral used in shield construction methods for urban development, such as in subways and sewage systems. This product excels in specific gravity control necessary for creating mud films, and it is developed as an economical product to maximize the inherent properties of clay minerals, as it is carefully selected and managed from high-quality materials. 【Features】 ■ Excellent water-stopping properties ■ Environmentally friendly and non-polluting ■ Superior running costs and economic efficiency ■ Excellent solubility and easy handling *For more details, please refer to the catalog or feel free to contact us.

Company：テクニカ合同
Price：Other

others
mineral

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Technical Data: Magnetite - Paint -

[Cost Reduction] Rust-free magnetic paint filler - Filler with ferrimagnetic properties - MagniF (Magnetite)

The MagniF series magnetite is an environmentally friendly material as it is a naturally occurring mineral. The ferrimagnetic MagniF blended paint imparts properties that attract magnetic force to the painted area. Additionally, while it is a magnetic filler, it has superior rust resistance compared to iron powder-based fillers. Furthermore, since our products are natural rather than synthetic, it is possible to keep costs down. Please feel free to download for more detailed information. 　　　　　　　　　↓↓↓↓↓↓↓

Company：レプコ本社工場
Price：Other

Organic Natural Materials
magnet
Engineering Plastics
mineral

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Pyrophyllite Market Size, Share, Analysis, Forecast 2024-2034

The advancement of new technologies and the increasing applications in other specialized fields such as synthetic diamonds and pesticides are driving market growth.

Fatpos Global has announced a new research report on the global pyrophyllite market. The pyrophyllite market is projected to grow at a compound annual growth rate (CAGR) of 5.4% from 2024 to 2034. The market size, initially estimated at $72.1 million in 2023, is expected to expand to $129.3 million by 2034. Pyrophyllite is a natural mineral belonging to the phyllosilicate group, widely known for its unique chemical and physical properties. Due to its low expansion and high thermal conductivity, pyrophyllite is utilized in various industrial applications. Its characteristic features, such as high alumina content, excellent thermal stability, and low iron and alkali metal content, make it particularly prominent in industries such as ceramics, refractories, and paints. This material is also valued for its ability to withstand extreme temperatures without losing strength. Furthermore, its electrical conductivity and resistance to acid corrosion make it useful for electrical insulators and chemical-resistant items, with applications spanning multiple industries.

Company：データリソース
Price：500,000 yen-1 million yen

Other polymer materials
mineral

View product details

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

[Market Report] Global Market for Holo Sites

The global market for HelloSite is expected to reach $64.7 million by 2031, with a stable average annual growth rate of 5.4%.

The global halloysite market, valued at 40.36 million USD in 2022, is expected to experience significant growth, reaching an estimated 64.7 million USD by 2031. The compound annual growth rate (CAGR) from 2023 to 2031 is projected to be 5.4%, highlighting the increasing applications and demand for this unique aluminosilicate clay mineral. Halloysite, composed of silicon, aluminum, hydrogen, and oxygen, naturally exists as nanotubes. It is typically formed through the hydrothermal alteration of aluminosilicate minerals. As a nanomaterial, halloysite stands out for its cost-effectiveness, biocompatibility, and immediate availability, especially when compared to other nanomaterials like carbon nanotubes. For application methods, please check the [PDF download] button or apply directly through the related links.

Company：Panorama Data Insights Ltd.
Price：Other

others
mineral

View product details

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

mineral Product List and Ranking from 18 Manufacturers, Suppliers and Companies | IPROS GMS

mineral Manufacturer, Suppliers and Company Rankings

mineral Product ranking