Last Updated： Aggregation Period:Dec 10, 2025～Jan 06, 2026
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Dec 10, 2025～Jan 06, 2026
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Dec 10, 2025～Jan 06, 2026
This ranking is based on the number of page views on our site.
256～270 item / All 821 items
Possibility of producing colorful rubber!
■What is Compression Molding? Measured rubber material is placed into the cavity of a heated mold (usually between 150°C and 180°C) and is then pressurized and vulcanized using a compression molding machine. This molding method is the most historically significant and representative method of rubber molding. *For more details, please refer to the PDF document or feel free to contact us.
High-quality two-color molded products can be produced!
■What is Two-Color Molding Two-color molding is a molding method that typically shapes different materials from a single mold, but it involves molding the same material in two separate processes. Although the number of products molded using this two-color method has decreased recently, there are still items like keypads. Additionally, our company leverages extensive experience and knowledge to assist in producing high-quality two-color molded products. *For more details, please refer to the PDF document or feel free to contact us.*
We also have materials that comply with the Food Sanitation Act, so please make use of them!
■What is polyurethane rubber? Depending on how it is bonded, it can be classified into polyester (EU) and polyether (AU). The ester type is prone to hydrolysis (due to steam, heat, acid, etc.) but has excellent oil resistance. The ether type is less prone to hydrolysis but has inferior oil resistance. Typically, polyurethane (PU) is a thermosetting resin that hardens when heat is applied, so it requires a different method of mold usage compared to general thermoplastic resins. In this case, a method called casting molding is used, where pre-melted polyurethane (PU) is poured into the mold and heated to cure. There are also materials compliant with the Food Sanitation Act, so please make use of them. *For more details, please refer to the PDF materials or feel free to contact us.
Leave vacuum forming to us!
At Shimoda Industrial Ibaraki Co., Ltd., we perform "vacuum forming." We offer "film insert" that allows for high design flexibility, accommodating complex shapes, color variations, and various patterns, as well as "TOM molding," which retains the texture of the film surface and allows for matching of text and patterns. Please feel free to contact us with your requests. 【Processing Technologies】 ■ Film Insert ■ TOM Molding *For more details, please download the PDF or feel free to contact us.
It is possible to achieve a surface shape close to injection molding! It allows for the molding of thin plastic sheets.
"Pressure Forming" is a molding method that shapes a heated and softened plastic sheet by tightly pressing an air pressure box against a mold from above, using the pressure of compressed air to adhere the sheet to the mold, allowing it to take the desired shape. Since it applies several times higher pressure compared to vacuum forming, the finish boasts precision close to that of injection molding. The types of plastics that can be used include ABS, AES, PMMA, PC, PP, PE, HIPS, PET, PVC, and also super engineering plastics such as PEI, PSF, and PEEK. 【Features】 ■ Low cost for mold production ■ Shorter production time compared to injection molding ■ Suitable for small-batch production of various types ■ Material selection is possible if using thermoreversible plastics ■ Capable of handling large sizes *For more details, please refer to the PDF document or feel free to contact us.
We can accommodate everything from small lots to mass production! We can also produce large sizes and mold them at low cost.
"Heat press molding" is a molding method that involves attaching male and female molds to a press machine, heating them, and then sandwiching a softened plastic sheet (resin board) between the two molds. It is suitable for molding thicker sheets due to the efficient heat transfer to the resin. However, it is not suitable for molding complex shapes. 【Features】 - Uses wooden or resin molds, resulting in low mold costs - Shorter production time compared to injection molding - Beautifully finished corner radii - Capable of producing large sizes at low costs - Can accommodate small lots to mass production *For more details, please refer to the PDF materials or feel free to contact us.
From the design and manufacturing of precision resin molds to prototyping and mass production, we provide consistent support with proven results in various industries such as electronic components, connectors, automotive parts, and medical applications.
With 45 years of experience, we specialize in precision resin molds and molding, catering to precision parts for electronic components, connectors, automobiles, medical devices, everyday goods, cosmetics, robots, optical components, and more. We have a proven track record with various molding materials including PA, PC, PBT, PPS, LCP, PP, PE, etc., with and without glass. Based on data from experienced mold designers and flow analysis, we aim to create molds that enhance productivity.
Leave your plastic molding needs to us!
At Micron Chemical Co., Ltd., we offer plastic molding technologies such as injection molding and blow molding. Injection molding, which is mainly used for molding thermoplastic resins, allows for relatively quick cycle times. In addition, blow molding specializes in the production of not only blow containers but also irregularly shaped products, accommodating a wide range of applications from small bottles to large tanks. 【Suitable Molded Products】 ■ Injection Molding - Automotive parts - Home appliance parts - Industrial parts - PC-related parts - Electronic components - Medical parts - Miscellaneous goods, etc. ■ Blow Molding - Toys and other daily necessities - Bottles for mushroom cultivation - Agricultural supplies - Bottles for food/non-food/beverages/cosmetics - Industrial parts, etc. *Please feel free to contact us for more details.
Form the cam hole through forging, eliminating the cutting process completely!
▼Issue - We want to reduce machining man-hours by performing the forming of the four cam holes through forging. ▼Solution - Integrated the die for the holes and external burrs, and formed the center hole and cam holes through forging. - Cold-sized the end faces of the four cam holes at a 15° angle, eliminating the machining process. ▼Specifications Material: S45C (Steel) Weight: 3kg Dimensions: Φ147 × 80mm Accuracy: -0.5 to +1.5mm Equipment: 3150-ton forging press Quantity: 100 to 3,000 pieces/month ▼Mold We handle everything from mold design to mold manufacturing and maintenance in-house. Not only do we manufacture forged products, but we also take on mold design, ensuring the precision of the products. Tokyo Precision Forging Co., Ltd. 1858 Osawa, Joso City, Ibaraki Prefecture 300-2727 TEL: 0297-42-4631 FAX: 0297-42-4634
In the automotive industry! Hollow molding that considers product rigidity enhancement, solution improvement, shrinkage reduction, and weight reduction is possible.
Gas-assisted molding (AGI) automotive parts (outer handles) PC/PET By using gas injection (AGI molding method), we solve the issues of conventional injection molding and achieve high-level dimensional accuracy that was previously difficult. Hollow molding that considers product rigidity improvement, warpage reduction, shrinkage improvement, and weight reduction is possible. Instead of maintaining high pressure after resin filling in general injection molding, nitrogen gas is injected to maintain pressure (low pressure) from inside the product, significantly reducing the occurrence of defects such as shrinkage, warpage, and flash that were drawbacks of conventional molding. 【Specifications】 ■ Material: Resin, engineering plastics, general-purpose plastics ■ Lot: 1,000 to 100,000 pieces ■ Accuracy: 0.1mm to 1/100mm ■ Industry: Batteries, automotive (mass production), automotive electrical components *For more details, please refer to the PDF document or feel free to contact us.
Mold temperature management, equipment including sensors! In case of defects, it will automatically discharge outside the system.
At Tada Plastic Industry, we address the essential quality improvement of precision injection molding through equipment that includes precision molding machines, mold temperature management, and sensors. For example, in the automation of inspections—using in-mold pressure sensors—we monitor the in-mold pressure waveform and determine defects in real-time. In the case of a defect, it is automatically discharged outside the system. (Line out) 【Specifications】 ■ Material: Resin, super engineering plastics, engineering plastics ■ Lot size: 1,000 to 100,000 pieces ■ Accuracy: 1/100 to 1/1000 mm ■ Industry: Automotive (mass production), electronic components, medical devices *For more details, please refer to the PDF document or feel free to contact us.
Introducing decoration techniques such as "in-mold molding" for adding embellishments to the uneven surfaces of small and medium-sized molded products!
We would like to introduce the decorative technologies of our partner company. These include "heat transfer (hot stamping)," which decorates heated design surfaces, and "resin plating," which can reproduce the texture and feel of metal. Please feel free to contact us when you need our services. 【Features】 ■ Heat transfer (hot stamping): Decoration on heated design surfaces ■ In-mold forming: Decoration on the uneven surfaces of small to medium-sized molded products ■ Resin plating: Reproduces the texture and feel of metal ■ Vacuum metallization: Has brightness and does not block radio waves ■ Painting: Decoration possible regardless of the substrate *Please note that we do not have the equipment for decoration. It will be handled by our partner company. *For more details, please refer to the PDF document or feel free to contact us.
It can accommodate complex shapes and excels in design flexibility! Hard coating can be performed simultaneously with molding.
"In-mold molding" is a decorative technology that can reduce processes such as painting, leading to savings in time and costs. It allows for hard coating treatment to be performed simultaneously with molding, accommodating a wide range of variations such as chrome-like finishes and surface textures. Additionally, compared to painting and plating processes, the use of organic solvents can be reduced, making it environmentally friendly. 【Features】 ■ Reduces processes such as painting, enabling savings in time and costs ■ Capable of accommodating complex shapes, offering excellent design flexibility ■ Supports a wide range of variations such as chrome-like finishes and surface textures ■ Allows for hard coating treatment to be performed simultaneously with molding ■ Reduces the use of organic solvents compared to painting and plating processes *Please note that we do not have the equipment for decoration. It will be handled by partner companies. *For more details, please refer to the PDF document or feel free to contact us.
Improving surface hardness and weather resistance! By combining secondary processing, we meet various customer needs!
Our company realizes products that meet various customer requests by combining secondary processing such as "painting." By adding metallic and pearl effects, we can create a sense of luxury, and by applying various stabilizers and UV absorbers, we can improve weather resistance. Please feel free to contact us when you need our services. 【Features】 ■ Luxury: Hides processing marks and color unevenness, adds metallic and pearl effects ■ Improved surface hardness: Coated with silicone-based or acrylic-based paints ■ Enhanced weather resistance: Coated with various stabilizers and UV absorbers *Regarding decoration, our company does not have the necessary equipment. It will be handled by a partner company. *For more details, please refer to the PDF document or feel free to contact us.
Solving the problems of conventional injection molding! It is possible to significantly reduce the occurrence of shrinkage, warping, and burrs.
"Gas Injection (AGI Molding Method)" enables hollow molding that considers product rigidity enhancement, warpage improvement, shrinkage reduction, and weight reduction. It solves the issues of conventional injection molding and achieves a high level of dimensional accuracy that was previously difficult to attain. Instead of maintaining pressure after resin filling in standard injection molding, nitrogen gas is injected to maintain pressure from within the product, significantly reducing the occurrence of defects such as shrinkage, warpage, and flash that were problems in traditional molding. 【Features】 ■ Metal replacement ■ Enhanced product rigidity ■ Improvement of warpage and shrinkage ■ Weight reduction *For more details, please refer to the PDF materials or feel free to contact us.
