We have compiled a list of manufacturers, distributors, product information, reference prices, and rankings for nozzle.
ipros is IPROS GMS ・ IPROS One of the largest technical database sites in Japan that collects information on.

nozzle(1mm) - List of Manufacturers, Suppliers, Companies and Products

Last Updated： Aggregation Period:Sep 17, 2025～Oct 14, 2025
This ranking is based on the number of page views on our site.

nozzle Product List

166～180 item / All 226 items

Displayed results
Resin Spray Nozzle "King Nozzle" TYPE-FMS Series

Resin Spray Nozzle "King Nozzle" TYPE-FMS Series

Integrated flat-type spray with low flow rate.

The 【TYPE-FMS】 is a flat-type spray nozzle made of PP (polypropylene) that provides a strong spray even with a small amount of water. Due to its low flow rate, the mounting screw size is also small at 1/8” (male thread), and it generates a fine mist in a one-piece design. It was developed for use in automatic car wash watering systems, but its applications have expanded widely. It is suitable not only for cleaning and watering but also for defoaming, and larger spray diameters can utilize impact force. Additionally, being made of resin, it is resistant to acids and alkalis, making it ideal for surface cleaning before painting or plating. As it is a one-piece design, there are no combinations available. There are four types in the lineup based on different spray diameters, which result in variations in spray angle and spray volume.

  • nozzle
  • spray
  • Plating Equipment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
【Demo unit available for loan!】Sonic Air Knife System (Blower Type)

【Demo unit available for loan!】Sonic Air Knife System (Blower Type)

Blow away water, dust, and dirt from parts with high-speed air and dry quickly. Demo units are also available for loan!

Water removal drying with Sonic Corporation's blower and air knife! By rotating the fan inside the blower at a minimum of approximately 12,000 rpm to 20,000 rpm, it is possible to achieve a larger airflow than compressors or domestic blowers. Additionally, one of the greatest features of the Sonic air knife system is that it is very economical, consuming only a fraction of the power compared to similar operations using conventional compressed air. Environmentally, it not only operates at low noise levels but also contributes to the reduction of carbon dioxide emissions due to its low power consumption. Demo units are available for loan, so please feel free to contact us. 【Demo Units】 ★ Unit 1 (Sonic 70) Flow rate: 3 Nm³/min to 13 Nm³/min Motor size: 5.5 kW *With inverter ★ Unit 2 (Sonic 85) Flow rate: 4 Nm³/min to 20 Nm³/min Motor size: 7.5 kW *With inverter ★ Air Knife Total length: 610 mm Maximum wind speed: approximately 170 m/sec Connection diameter: 3 inches Slit width: approximately 1 mm Note: Please contact us if you need a hose.

  • IMG_0843.JPG
  • Pneumatic Equipment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Uniform Distribution Nozzle (Small Amount Spray) JJRP

Uniform Distribution Nozzle (Small Amount Spray) JJRP

Excellent chemical resistance! Full cone nozzle with a circular spray pattern for uniform flow distribution.

The "Uniform Distribution Nozzle (Small Spray) JJRP" is a small spray conical nozzle made of PTFE (polytetrafluoroethylene) with excellent chemical resistance, and the injection-molded part is made of PVDF (polyvinylidene fluoride). The PTFE nozzle consists of two parts: the nozzle body and an X-shaped wobbler, while the PVDF nozzle consists of the injection-molded nozzle body and an X-shaped wobbler. It is a one-piece nozzle with the wobbler press-fitted into the body. By adopting a specially shaped wobbler, it achieves a small spray volume and excellent flow distribution. 【Features】 ○ Small spray conical nozzle ○ Adoption of a specially shaped wobbler ○ Achieves small spray volume and excellent flow distribution ○ Made of PTFE (polytetrafluoroethylene) with excellent chemical resistance ○ Injection-molded part made of PVDF (polyvinylidene fluoride) For more details, please contact us or download the catalog.

  • nozzle

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Manual Gun Nozzle GN-SUS20/GN-SUS25

Manual Gun Nozzle GN-SUS20/GN-SUS25

It is convenient to attach it to the end of the hose when combined with an electric pump or air pump for solvents.

"Merits" ● Easy operation at your fingertips ● Usable even with self-weight drop * Please pay attention to the operating pressure. "Features" ● Dispenses when gripped, stops when released ● Equipped with a lever hook

  • Other pumps

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Cleaning nozzle "Rotary Barrier Nozzle RV-100"

Cleaning nozzle "Rotary Barrier Nozzle RV-100"

Even if the situation of the cleaning target changes, the spray pattern can be adjusted!

The "Rotary Barrier Nozzle RV-100" is a cleaning nozzle that can be used while working with both hands. It features a stop mechanism and can be used for general cleaning purposes. Even if the conditions of the cleaning target change, by simply rotating the intermediate grip within 90°, the spray pattern can change from a streamlined straight to a full cone. Additionally, by attaching a flat use adapter, it is now possible to set the spray from straight to flat. 【Features】 ■ By rotating the intermediate grip within 90°, the spray pattern can change from a streamlined straight to a full cone. ■ By attaching a flat use adapter, it is possible to set the spray from straight to flat. *For more details, please refer to the PDF document or feel free to contact us.

  • High pressure cleaner
  • nozzle
  • Other cleaning machines

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Flexible shape fan nozzle "Yamagata distribution nozzle (with flexible joint) UT+VP"

Flexible shape fan nozzle "Yamagata distribution nozzle (with flexible joint) UT+VP"

Adjustable spray direction! A fan-shaped nozzle that generates a fan-shaped spray with a Yamagata flow distribution.

The "Yamagata Distribution Nozzle (with Flexible Joint) UT+VP" can generate a fan-shaped spray with a Yamagata flow distribution, where the center is strong and gradually weakens towards both ends. The VP nozzle with a ball joint is integrated with a ball for direction change, allowing the spray direction of the nozzle to be adjusted to less than 40°. It consists of a nozzle, cap, and adapter, with the nozzle's outlet made of ceramic. 【Features】 - Generates a fan-shaped spray with Yamagata flow distribution - Spray pattern is strong in the center and gradually weakens towards both ends - Spray direction of the nozzle can be adjusted to less than 40° - The nozzle's outlet is made of ceramic - Composed of a nozzle, cap, and adapter For more details, please contact us or download the catalog.

  • nozzle

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Uniform Distribution Nozzle (High Flow Flange Type) TJJX

Uniform Distribution Nozzle (High Flow Flange Type) TJJX

High flow flange type! Circular spray pattern with uniform flow distribution conical nozzle.

The "Uniform Distribution Nozzle (High Flow Flange Type) TJJX" is a full cone nozzle with a circular spray pattern and uniform flow distribution. It connects to piping via flange fastening. The nozzle body is composed of the main body and an X-shaped whirler, which is secured with a lock bolt and can be removed from the main body. By adopting the newly developed X-shaped whirler, the overall length of the nozzle has been reduced by 20% compared to conventional products. The use of the X-shaped whirler in the swirler allows for a larger foreign object passage diameter, making it less prone to clogging. 【Features】 ○ High flow flange type full cone nozzle ○ Circular spray pattern with uniform flow distribution ○ X-shaped whirler used in the swirler ○ Large foreign object passage diameter, less prone to clogging ○ Overall nozzle length reduced by 20% (compared to conventional products) For more details, please contact us or download the catalog.

  • nozzle

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Case Study of the High-Pressure Spray Humidifier "Clean Mist"

Case Study of the High-Pressure Spray Humidifier "Clean Mist"

Powerful humidification! You can consider it for humidifying various places!

We would like to introduce a case study from a theater studio that has implemented our high-pressure mist humidifier, "Clean Mist." 【Case Overview】 ■ Facility: Theater Studio (Tokyo) ■ Installation Location: Rehearsal Room ■ Usage Period: November to April The facility was in a situation where people had to gather and rehearse even during an outbreak of infectious diseases. To raise the humidity as a measure against infections, they had placed a household-sized humidifier, but there was no change in the humidity level, leading them to consider using a commercial humidifier. They were looking for a humidifier that could significantly increase humidity and found our "Clean Mist." After trying it out in a free demo, the results were remarkable. Although the high ceiling was a challenge, the powerful mist spray from the high-pressure pump was able to raise the humidity without any issues. I believe the humidifying power of "Clean Mist" can only be understood by trying it out. If you are interested, please feel free to contact us. *For more details, please refer to the PDF materials or feel free to reach out to us.

  • Humidification device

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Multichannel Jet FL-600M4 (Air Nozzle)

Multichannel Jet FL-600M4 (Air Nozzle)

Best-selling Rehiller air nozzle FL-600E's sister product, ultra-compact round type, made of stainless steel SUS316L (4mm type).

Rehira's multi-channel jet (air nozzle) allows for laminar airflow, which not only provides powerful impact force but also reduces noise levels. Additionally, by utilizing laminar flow, it can also minimize air consumption. In other words, it is an energy-saving product. The blow pattern is straight (7mm width).

  • Lechler_General-Industry _Air-Nozzles.jpg
  • nozzle
  • nozzle
  • Pneumatic Equipment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Three-group standard fan-shaped nozzle "Yamagata distribution nozzle (disassemblable) VV"

Three-group standard fan-shaped nozzle "Yamagata distribution nozzle (disassemblable) VV"

All-metal three-piece design! Disassemblable serrated distribution nozzle that generates a fan-shaped spray.

The "Yamagata Distribution Nozzle VV" can generate a fan-shaped spray with a Y-shaped flow distribution that is strong in the center and gradually weakens towards both ends. When overlapping the patterns at both ends during multiple nozzle arrangements, the flow distribution becomes uniform across the entire width. It is a fully metal three-part nozzle consisting of a spray tip, cap, and adapter, allowing only the worn spray tip to be replaced. The strainer is standard equipment for small spray products and is also removable. 【Features】 ○ Yamagata distribution nozzle ○ Disassemblable ○ Fully metal three-part design ○ Uniform flow distribution across the entire width ○ Strainer is standard equipment for small spray products For more details, please contact us or download the catalog.

  • nozzle

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Ultra Fine Bubble Generation Nozzle 'UFB DUAL 25A' Specifications

Ultra Fine Bubble Generation Nozzle 'UFB DUAL 25A' Specifications

About the Ultra Fine Bubble (Nano Bubble) Generation Nozzle UFB DUAL 25A.

UFB DUAL is a product certified with the JET mark. It is a nozzle that can be directly connected to the water supply pipe, capable of creating ultra-fine bubbles from some of the air components contained in water without introducing outside air. There are no changes to water quality, purity, or pH. ■ Can be installed on the main valve By installing just one unit on the main valve, all the water flowing beyond it will become ultra-fine bubble water. ■ No external power required It is designed to generate ultra-fine bubbles at low water pressure, similar to tap water levels. There is no need for pumps or other equipment, resulting in no operating costs. Since it connects directly to the water supply pipe, there is no need to secure space for installation. ■ High cost performance By installing it on the main valve, it covers all facilities without any running costs. Compared to stationary storage methods, it achieves very high cost performance. ■ Supports large flow rates of 40A and above, making it suitable for large facilities. ■ Other fluids besides water can also be used. (Custom-made materials can be produced. Please consult us.) *For more details, please refer to the PDF document or feel free to contact us.

  • 25Ahoukou.jpg
  • 25Aspec.jpg
  • others

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Full Cone Nozzle 'Wide Angle Uniform Distribution Nozzle (Wide Angle Fine Mist) TSP'

Full Cone Nozzle 'Wide Angle Uniform Distribution Nozzle (Wide Angle Fine Mist) TSP'

From a compact nozzle to a wide spread! Circular spray pattern conical nozzle.

The "Wide Angle Uniform Distribution Nozzle (Wide Angle Fine Mist) TSP" is a conical nozzle with a circular spray pattern that provides an even and wide-angle flow distribution. The nozzle sprays directly from the tip and in a fan shape from the sides, allowing for a wide spread that covers a large area. Fine mist in the range of 100 to 200 μm expands super wide from the compact nozzle and can be applied for various purposes such as firefighting, disaster prevention, and dust suppression. 【Features】 ○ Conical nozzle with a circular spray pattern ○ Wide spread covering a large area ○ Suitable for firefighting, disaster prevention, and dust suppression ○ Compact type ○ Fine mist of 100 to 200 μm For more details, please contact us or download the catalog.

  • nozzle

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
JX Series Circumferential Outer Injection Ring Nozzle for Compressors

JX Series Circumferential Outer Injection Ring Nozzle for Compressors

It can be connected to a hot air generator and used with high-temperature hot air.

This is a nozzle designed primarily for applications such as draining and drying the inner walls of tubular materials (pipes, tubes, etc.). 【Features】 - Standard products available from a small diameter of Φ20 to Φ90 for the discharge lip - Stable performance from low wind speeds up to 160 m/s - Nozzle specification: 0.3 to 0.5 mm - Inlet: PS1/4”・3/8” (internal thread)

  • nozzle
  • Surface treatment contract service

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Battery-operated sensor auto-stop nozzle ATNB-20

Battery-operated sensor auto-stop nozzle ATNB-20

Battery-operated sensor auto-stop nozzle with auto-stop function even when self-weight falls.

"Battery-Powered Sensor Auto Stop Nozzle Series" ATNB-20 (for light oil, kerosene, and medium viscosity oil) ◎ Adopts a battery-powered auto stop function, allowing for transfer even without a pump body. This nozzle has a built-in sensor that automatically stops in response to liquid. It can be used approximately 200 times with three AA lithium batteries. *Please pay attention to the usage pressure and flow rate range.

  • ATNB-20_02.jpg
  • ATNB-20_04.jpg
  • ATNB-20_07.jpg
  • ATNB-20_08.jpg
  • ATNB-20_07kai.jpg
  • ATNB-20_05-kai.jpg
  • nozzle

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Multi-Channel Jet FL-600M (Air Nozzle)

Multi-Channel Jet FL-600M (Air Nozzle)

Best-selling Rehiller air nozzle FL-600E's sister product, small round type.

Lechler multi-channel jet (air nozzle) The air emitted is laminar, which not only provides powerful impact force but also reduces noise levels. Additionally, by maintaining laminar flow, the amount of air consumed during use can also be minimized. In other words, it is an energy-saving product. *Lechler GmbH is a German spray nozzle manufacturer.*

  • Lechler_General-Industry _Air-Nozzles.jpg
  • nozzle
  • nozzle
  • Pneumatic Equipment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Search Keywords Related to nozzle

COPYRIGHT © 2001-2025 IPROS CORPORATION ALL RIGHTS RESERVED.