We have compiled a list of manufacturers, distributors, product information, reference prices, and rankings for nozzle.
ipros is IPROS GMS ・ IPROS One of the largest technical database sites in Japan that collects information on.

nozzle(3m) - List of Manufacturers, Suppliers, Companies and Products | IPROS GMS

Last Updated： Aggregation Period:Feb 04, 2026～Mar 03, 2026
This ranking is based on the number of page views on our site.

nozzle Product List

61～90 item / All 90 items

Displayed results
2-fluid nozzle "Fan-shaped nozzle DDRP+AS"

2-fluid nozzle "Fan-shaped nozzle DDRP+AS"

Compatible with multi-variety production! Mist fan-shaped nozzle usable with both 1st and 2nd fluid specifications.

The "Fan-shaped Nozzle DDRP+AS" is a fog fan-shaped nozzle composed of multiple parts including the nozzle body, adapter, air socket, and check valve, and can be used in both single fluid and dual fluid configurations. It features an internal mixing design that atomizes by mixing compressed air and liquid inside the nozzle. A check valve is built into the air side, allowing it to be used as a single fluid nozzle in the medium to high water flow range and as a dual fluid nozzle in the low water flow range. It is a liquid pressurization type that supplies liquid to the dual fluid nozzle. 【Features】 - Usable in both single fluid and dual fluid configurations - Single fluid in medium to high water flow range, dual fluid in low water flow range - Wide turn-down ratio (throttle ratio) of 1:20 - Suitable for use in environments with minimal variation in flow distribution and spray angle - Spray pattern thickness angle is wide at 60°, allowing for surface cooling For more details, please contact us or download the catalog.

  • nozzle
  • nozzle

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Stealth microbubbles

Stealth microbubbles

"Stealth microbubbles" refer to microbubbles that are invisible and cannot be recognized by the naked eye.

We decided to conduct an experiment to see what happens when microbubbles are introduced into a rice field.

  • others
  • nozzle

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Lechler fine mist cooling spray nozzle

Lechler fine mist cooling spray nozzle

The Lehira company's fine mist cooling spray nozzle is effective with ultra-fine mist spraying.

The Rehira Corporation's spray nozzle (model number: 2MN series) is a spray nozzle specifically designed for fine mist cooling. It makes a significant contribution to countering the extreme heat in summer and the dryness in winter. It is often used for temperature and humidity management in plant cultivation and livestock facilities. Additionally, it is utilized not only in the agricultural market but also in industrial markets (food, semiconductors, paper manufacturing) for temperature and humidity control. A major feature of the fine mist spray is its ability to regulate temperature and humidity without wetting crops, livestock, or products.

  • 写真 2024-11-22 13 47 43.jpg
  • others
  • nozzle
  • Other environmental measures and recycling
  • nozzle

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Flexible shape fan nozzle "Yamagata distribution nozzle (with flexible joint) UT+VP"

Flexible shape fan nozzle "Yamagata distribution nozzle (with flexible joint) UT+VP"

Adjustable spray direction! A fan-shaped nozzle that generates a fan-shaped spray with a Yamagata flow distribution.

The "Yamagata Distribution Nozzle (with Flexible Joint) UT+VP" can generate a fan-shaped spray with a Yamagata flow distribution, where the center is strong and gradually weakens towards both ends. The VP nozzle with a ball joint is integrated with a ball for direction change, allowing the spray direction of the nozzle to be adjusted to less than 40°. It consists of a nozzle, cap, and adapter, with the nozzle's outlet made of ceramic. 【Features】 - Generates a fan-shaped spray with Yamagata flow distribution - Spray pattern is strong in the center and gradually weakens towards both ends - Spray direction of the nozzle can be adjusted to less than 40° - The nozzle's outlet is made of ceramic - Composed of a nozzle, cap, and adapter For more details, please contact us or download the catalog.

  • nozzle
  • nozzle

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Uniform fan-shaped nozzle "Eccentric Uniform Distribution Nozzle OVVEP"

Uniform fan-shaped nozzle "Eccentric Uniform Distribution Nozzle OVVEP"

Metal one-piece! A single fan-shaped nozzle that generates an eccentric fan-shaped spray from the nozzle axis.

The "Eccentric Uniform Distribution Nozzle OVVEP" generates an eccentric fan-shaped spray from the nozzle axis, allowing for an even flow distribution across the entire spray pattern. It eliminates spray liquid accumulation when multiple nozzles are arranged. This integrated type does not require diagonal mounting of the nozzle. The material is S303 or B (brass), and it is a fully metal integrated nozzle. It is ideal for use in industries such as steel, electronics, paper, pulp, printing, food, and agriculture, forestry, and fisheries. 【Features】 - Eccentric spray pattern with uniform flow distribution across the entire area from the nozzle axis - Eliminates spray liquid accumulation when multiple nozzles are arranged - Integrated type that does not require diagonal mounting of the nozzle - Fully metal integrated nozzle - Material is S303 or B (brass) For more details, please contact us or download the catalog.

  • nozzle
  • nozzle

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Hollow Cone Nozzle "Uniform Distribution Nozzle (Low Volume Spray) KKBP"

Hollow Cone Nozzle "Uniform Distribution Nozzle (Low Volume Spray) KKBP"

Fine mist generation small spray volume type! Spray pattern is a circular small spray volume hollow cone nozzle.

The "Uniform Distribution Nozzle (Low Volume Spray) KKBP" is a small volume conical nozzle with an annular spray pattern. It features a unique whirling design that allows for a large foreign object passage diameter, making it resistant to clogging while generating fine mist. There are two types of screw sizes: tapered male thread and parallel male thread. It has a compact design with fewer parts, consisting of two components: the nozzle body and the whirling component, which is removable for easy maintenance. 【Features】 ○ Conical nozzle for fine mist generation with low volume ○ Small volume conical nozzle with an annular spray pattern ○ Large foreign object passage diameter, resistant to clogging ○ Compact design with fewer parts ○ Removable whirling component for easy maintenance For more details, please contact us or download the catalog.

  • nozzle
  • nozzle

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Hollow Cone Nozzle "Uniform Distribution Nozzle (Low Flow Spray / Disassemblable) KD"

Hollow Cone Nozzle "Uniform Distribution Nozzle (Low Flow Spray / Disassemblable) KD"

Capable of generating fine mist! Spray pattern with three sets of small volume circular conical nozzles.

The "Uniform Distribution Nozzle (Low Flow Spray / Disassemblable) KD" is a small flow three-way hollow cone nozzle capable of generating fine mist with an annular spray pattern. It features a compact design that minimizes the overall length of the spray tip. The spray tip nozzle and closer are made of ceramic, and the entire section from the swirl chamber to the nozzle is formed with ceramic, providing exceptional wear resistance. The strainer is standard equipment for low flow models and is also removable. 【Features】 ○ Hollow cone nozzle, low flow type ○ Small flow three-way hollow cone nozzle with an annular spray pattern ○ Capable of generating fine mist ○ Compact design ○ Exceptional wear resistance For more details, please contact us or download the catalog.

  • nozzle
  • nozzle

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Rehila rotary tank cleaning nozzle (Model: 594/595)

Rehila rotary tank cleaning nozzle (Model: 594/595)

"Lechler" enables effective foam cleaning at low pressure!

A major feature of the 594/595 series nozzles is the foam spray! Since they are certified by EHEDG, they can be used not only for cleaning inside tanks but also for cleaning within the plant. They are one of the nozzles that perform effective cleaning even at low pressure. *Lechler GmbH is a German spray nozzle manufacturer.

  • 595縮小.png
  • Beverage Production Equipment
  • nozzle
  • nozzle
  • nozzle

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Rehilar's rotary tank cleaning nozzle (Model: 566 series)

Rehilar's rotary tank cleaning nozzle (Model: 566 series)

Cleaning with effective flat jet nozzles. Explosion-proof specifications are also available.

The 566 series is equipped with an effective flat jet nozzle and uses PEEK material slide bearings. It is a nozzle suitable for FDA and EC No. 1935/2004, particularly used in the food and beverage industry. An ATEX version that meets explosion-proof standards is also available upon request. *Lechler GmbH is a German spray nozzle manufacturer.*

  • Water Hydraulic Equipment
  • nozzle
  • nozzle
  • nozzle

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Integrated standard fan-shaped nozzle "Yamagata distribution nozzle VP"

Integrated standard fan-shaped nozzle "Yamagata distribution nozzle VP"

Ceramic nozzle! A simple integrated nozzle that generates a fan-shaped spray.

The "Yamagata Distribution Nozzle VP" can generate a fan-shaped spray with a Y-shaped flow distribution that is strong in the center and gradually weakens towards both ends. When overlapping the patterns at both ends during multiple nozzle arrangements, the flow distribution becomes uniform across the entire width. This is a simple integrated nozzle that uses ceramic at the nozzle tip and is directly screwed into the pipe body. The strainer (for metal body products only) is standard equipment for small flow products and can be removed. 【Features】 - Ceramic is used at the nozzle tip of the main body - Simple integrated nozzle - Strainer is standard equipment for small flow products and can be removed - The spray tip is made of ceramic and resin → The ceramic nozzle is molded with a durable engineering plastic For more details, please contact us or download the catalog.

  • nozzle
  • nozzle

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
2-fluid nozzle "Fan-shaped nozzle (small amount spray / ultra-compact) SCBIMV"

2-fluid nozzle "Fan-shaped nozzle (small amount spray / ultra-compact) SCBIMV"

Super compact type! A small amount spray fan nozzle with a wide flow adjustment range.

The "Fan-shaped Nozzle (Small Amount Spray / Ultra Compact) SCBIMV" consists of four components: nozzle tip, core, cap, and adapter, and is a two-fluid fan-shaped nozzle that generates a fine mist with an average particle diameter of less than 100μm. It features an internal mixing design that atomizes by mixing compressed air and liquid inside the nozzle. (Compressed air flows in the center of the nozzle, while liquid flows around the periphery in an internal mixing air type.) It is a liquid pressurization type that supplies pressurized liquid to the two-fluid nozzle. 【Features】 ○ Switchable between two spray patterns: uniform & triangular distribution ○ Minimum spray flow rate among two-fluid systems ○ Wide range of flow adjustment ○ Ultra compact type with a total length of approximately 42mm ○ Equipped with ON-OFF control function For more details, please contact us or download the catalog.

  • nozzle
  • nozzle

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Air Nozzle "Fan-Shaped Nozzle (Disassemblable) VZ"

Air Nozzle "Fan-Shaped Nozzle (Disassemblable) VZ"

Steam injection is also possible! An air nozzle that accommodates various injection volumes with chip replacement.

The "Fan-Shaped Nozzle (Disassemblable) VZ" is an air nozzle composed of three parts: a spray chip, a cap, and an adapter. Only the worn spray chip can be replaced, and the cap and adapter are compatible with standard fan-shaped nozzles (for liquids) in three sets. It can spray not only air but also steam. It is used in industries such as steel, machinery, electrical and electronics, paper, pulp and printing, food, and vehicles and transportation. 【Features】 ○ Compressor specification ○ Wide-angle spray (spray angle 90°) covers a large area ○ Various spray volumes can be accommodated by chip replacement ○ Steam spraying is also possible ○ Disassemblable type; made of metal For more details, please contact us or download the catalog.

  • nozzle
  • nozzle

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Small Flat Air Nozzle for Blowers 'WindJet YBLW'

Small Flat Air Nozzle for Blowers 'WindJet YBLW'

Achieve high impact and high flow rate blowers even at low pressure! Significantly energy-saving compared to compressor air.

The "WindJet YBLW" is a compact air nozzle for blowers that enables high impact and high flow rates even at low pressure, thanks to its unique structure that allows for efficient air rectification. Switching from compressed air results in significant energy savings. Additionally, despite its flat and compact shape, it features a blow-off width of 53mm, and we also offer headers with nozzles arranged in parallel to accommodate longer lengths. 【Features】 ■ A fault design that allows air to escape even if objects come into contact with the nozzle's blow-off section ■ Lower power consumption compared to compressed air systems ■ Compatible with long and complex shapes using headers and adjustable hoses *For more details, please refer to the catalog. Feel free to contact us with any inquiries. Spraying Systems, a global brand for spray nozzles, offers a variety of nozzles tailored to different applications based on over 90,000 items of proven performance. *For information on spraying nozzles, please download the PDF or contact us.

  • 背景2.jpg
  • イプロスーブロアエアーノズル?.png
  • Other machine elements
  • nozzle

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Rehiler manufactured rotary tank cleaning nozzle (Model: 5S2 / 5S3)

Rehiler manufactured rotary tank cleaning nozzle (Model: 5S2 / 5S3)

"Lechler" cleans with high impact and uniformity. It enables very effective cleaning through rotational control.

The 5S2 / 5S3 series performs spraying with a special flat jet nozzle, allowing for powerful and uniform cleaning. Additionally, effective cleaning is achieved by controlling the rotation. It is available in various spray angles and flow rates. Lechler's monitoring sensors can be used. *Lechler GmbH is a German spray nozzle manufacturer.*

  • Food Cleaning Equipment
  • nozzle
  • nozzle
  • nozzle

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Uniform Distribution Nozzle (Clogging Prevention Type) AJP

Uniform Distribution Nozzle (Clogging Prevention Type) AJP

Clogging prevention! A full cone nozzle with a circular spray pattern for uniform flow distribution.

The "Uniform Distribution Nozzle (Clogging Prevention Type) AJP" is a conical nozzle with a circular spray pattern and uniform flow distribution. It is a new concept product that atomizes without using a swirler. Since there is no swirler, it has a structure with an extremely large foreign object passage diameter, making it resistant to clogging. It sprays at a right angle to the inflow direction. We offer injection-molded products made of polyphenylene sulfide (PPS) suitable for spraying chemical solutions such as hydrochloric acid. 【Features】 - Circular spray pattern with uniform flow distribution - Structure with a large foreign object passage diameter, resistant to clogging - Angle type that sprays at a right angle to the inflow direction - Composed of two parts: the main body and the cap - The orifice cap is screw-in type For more details, please contact us or download the catalog.

  • nozzle
  • nozzle

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
2-fluid nozzle "Full cone nozzle (small spray / compact) SCBIMJ"

2-fluid nozzle "Full cone nozzle (small spray / compact) SCBIMJ"

Super compact type! A small amount spray conical nozzle with a wide flow adjustment range.

The "Conical Nozzle (Small Amount Spray / Ultra Compact) SCBIMJ" consists of four components: nozzle tip, core, cap, and adapter, and is a two-fluid conical nozzle that generates a fine mist with an average particle diameter of less than 100μm. It features an internal mixing design that atomizes by mixing compressed air and liquid inside the nozzle. (Compressed air flows in the center of the nozzle, while liquid flows around the outer perimeter in an internal mixing air type.) It is a liquid pressurization type that supplies pressurized liquid to the two-fluid nozzle. 【Features】 ○ Circular spray pattern with uniform flow distribution ○ Minimum spray flow rate among two-fluid systems ○ Ultra-compact design with an overall length of about 42mm ○ Equipped with ON-OFF control function ○ Liquid pressurization type that sprays at a pressure of approximately 0.1 to 0.3 MPa For more details, please contact us or download the catalog.

  • nozzle
  • nozzle

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Rehila rotary tank cleaning nozzle (Model: 5P2/5P3)

Rehila rotary tank cleaning nozzle (Model: 5P2/5P3)

"Lechler" unique pop-up nozzle! Installed at the same level as the wall surface. The nozzle in the rotating part pops out under pressure to perform cleaning.

The 5P2/5P3 series can be installed at the same level as the tank's wall. At a certain water pressure, the rotating nozzle pops out from the housing and cleans the inside of the tank. This nozzle is also suitable for pipe cleaning and foam spraying. It is particularly used in the food and beverage industry, pharmaceutical industry, and chemical industry. *Lechler GmbH is a German spray nozzle manufacturer.*

  • LEC_BR_5P30431YAR000DE_M00DE_mitGewinde.png
  • Beverage Production Equipment
  • nozzle
  • nozzle
  • nozzle

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Rehiler manufactured rotary tank cleaning nozzle (Model: 5TA series)

Rehiler manufactured rotary tank cleaning nozzle (Model: 5TA series)

The ≪Lechler≫ powerful straight spray cleans stubborn dirt stuck inside the tank!

The 5TA series is a tank cleaning nozzle suitable for the pharmaceutical and food and beverage industries. Its high-performance solid jet spray effectively removes stubborn dirt. Additionally, this nozzle is suitable for small tanks. The recommended pressure is 0.5 MPa, but the maximum operating pressure can reach up to 1.5 MPa. It also features high-quality surface treatment. *Lechler GmbH is a German spray nozzle manufacturer.*

  • Beverage Production Equipment
  • nozzle
  • nozzle
  • nozzle

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Uniform Sector Nozzle "Uniform Distribution Nozzle VEP"

Uniform Sector Nozzle "Uniform Distribution Nozzle VEP"

Ceramic integrated nozzle! Sector nozzle with uniform flow distribution spray pattern.

The "Uniform Distribution Nozzle VEP" is a uniform sector nozzle that generates a fan-shaped spray with an even flow distribution across the entire spray pattern. The impact force per unit area is uniform. It is an integrated nozzle that uses ceramic in the spray tip section. The Seltim is a ceramic-resin spray tip molded from a robust engineering plastic. It is ideal for use in industries such as steel, machinery, electrical and electronics, printing, food, and vehicles and transportation. 【Features】 ○ Generates a fan-shaped spray with uniform flow distribution ○ Spray pattern with uniform flow distribution across the entire area ○ Integrated nozzle using ceramic in the tip section ○ Uniform impact force per unit area ○ Seltim is a ceramic-resin spray tip For more details, please contact us or download the catalog.

  • nozzle
  • nozzle

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
2-fluid nozzle "Fan-shaped nozzle (small amount spray) CBIMV"

2-fluid nozzle "Fan-shaped nozzle (small amount spray) CBIMV"

Small spray type! A two-fluid fan-shaped nozzle that generates a fine mist with an average particle diameter of 100μm or less.

The "Fan-Shaped Nozzle (Small Amount Spray) CBIMV" is a mist generation nozzle that can switch between two spray patterns: uniform and triangular distribution. It is a two-fluid fan-shaped nozzle that generates mist with an average particle diameter of less than 100μm. It is a liquid pressurization type that sprays at a pressure of approximately 0.1 to 0.3 MPa. It can produce two patterns: a uniform flow distribution across the entire area and a triangular distribution that is strong in the center and gradually weakens towards both ends, offering a wide range of flow adjustment. 【Features】 ○ Switchable between uniform and triangular distribution, two spray patterns ○ Minimum spray flow in two fluids ○ Compact type ○ Structure resistant to clogging ○ Spray angles of 45°, 80°, and 110° For more details, please contact us or download the catalog.

  • nozzle
  • nozzle

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
2-fluid nozzle "Fan-shaped nozzle (small amount spray) CBIMV.S"

2-fluid nozzle "Fan-shaped nozzle (small amount spray) CBIMV.S"

Small spray type! A two-fluid fan-shaped nozzle that generates a fine mist with an average particle diameter of 30μm or less.

The "Fan-Shaped Nozzle (Small Amount Spray) CBIMV.S" is a space-saving, high-performance nozzle designed compactly from the BIM series of mist generation nozzles. It is a two-fluid fan-shaped nozzle that generates a fine mist with an average particle diameter of 30μm or less. It is a suction type that does not require a liquid pressurization device, using compressed air to draw up and spray the liquid. The two-fluid nozzle consists of four parts: nozzle tip, core, cap, and adapter, providing an even flow distribution across the entire area. 【Features】 ○ Two-fluid fan-shaped nozzle that generates a fine mist with an average particle diameter of 30μm or less ○ Even spray pattern with uniform flow across the entire area ○ No device required for liquid pressurization ○ Compact type ○ Spray angle of 80° For more details, please contact us or download the catalog.

  • nozzle
  • nozzle

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Three-group standard fan-shaped nozzle "Yamagata distribution nozzle (disassemblable) V"

Three-group standard fan-shaped nozzle "Yamagata distribution nozzle (disassemblable) V"

Ceramic three-piece shape! Disassemblable wedge-shaped distribution nozzle that generates fan-shaped spray.

The "Yamagata Distribution Nozzle V" can generate a fan-shaped spray with a Y-shaped flow distribution that is strong in the center and gradually weakens towards both ends. When overlapping the patterns at both ends during multiple nozzle arrangements, the flow distribution becomes uniform across the entire width. This is a three-part nozzle that uses ceramic in the spray chip nozzle section, consisting of a spray chip, cap, and adapter, allowing only the worn spray chip to be replaced. 【Features】 ○ Disassemblable Yamagata distribution nozzle ○ Ceramic used in the spray chip nozzle section ○ Strainer is standard equipment for small spray volume products and can be removed ○ The cell team consists of ceramic and resin spray chips → The ceramic nozzle is molded with a durable engineering plastic For more details, please contact us or download the catalog.

  • nozzle
  • nozzle

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Spray nozzle "King Nozzle" TYPE-MY

Spray nozzle "King Nozzle" TYPE-MY

A fine mist with a large flow rate (1L/min) can be obtained at a water pressure of approximately 0.2MPa.

The 【TYPE-MY】 is a metal spray nozzle that produces a large volume of fine mist at low pressures of 0.2 to 0.3 MPa (approximately the pressure of tap water). It contains fine mist particles around 10 µm and relatively larger particles of about 250 µm, so it is not a dry mist. However, in outdoor settings where water wetness is not an issue, it provides cooling through latent heat with a large amount of fine mist, as well as cooling effects from the water splash effect. - In gardens and rooftop gardens: It sprays upward, simultaneously achieving cooling and watering effects for the surrounding atmosphere, as well as visual effects. - On building rooftops: The fine mist and splash effects cool the surrounding rooftop area, provide watering, and contribute to the cooling of the rooftop surface, thereby reducing the building's cooling load. - In sports fields, golf courses, tennis courts, and outdoor pools: A refreshing breeze containing droplets is generated, effectively mitigating heat.

  • nozzle
  • spray
  • Plating Equipment
  • nozzle

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Uniform Sector Nozzle "Uniform Distribution Nozzle VE"

Uniform Sector Nozzle "Uniform Distribution Nozzle VE"

Replaceable nozzle! Sector nozzle that generates uniform flow distribution in a fan-shaped spray.

The "Uniform Distribution Nozzle VE" is a uniform sector nozzle that generates a fan-shaped spray with an even flow distribution across the entire spray pattern. The impact force per unit area is uniform. It is a three-part nozzle that uses ceramic in the spray tip. It consists of a spray tip, cap, and adapter, allowing for the replacement of only the worn spray tip. The strainer is standard equipment for small flow products and can also be removed. 【Features】 ○ Generates a fan-shaped spray with an even flow distribution ○ Uniform flow distribution spray pattern across the entire area ○ Replaceable nozzle tip when worn ○ Uniform impact force per unit area ○ Strainer is standard equipment for small flow products and can be removed For more details, please contact us or download the catalog.

  • nozzle
  • nozzle

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Microbubble generation nozzle - Loop flow microbubble generation nozzle

Microbubble generation nozzle - Loop flow microbubble generation nozzle

Achieving high vacuum levels with a new mechanism! Microbubbles that remove dirt with fine bubbles.

Developed a new type of loop flow microbubble generation nozzle.

  • nozzle
  • Piping Materials
  • Water Activation Device
  • nozzle

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Multi-Channel Jet FL-600STW (Air Nozzle)

Multi-Channel Jet FL-600STW (Air Nozzle)

Sister product of the best-selling Rehiller air nozzle FL-600E, offered in stainless steel 316L, wide type FL-600ST.

Lechler GmbH Multi-Channel Jet (Air Nozzle) The air emitted is laminar, which not only minimizes impact force but also reduces noise levels. Additionally, by maintaining laminar flow, the amount of air consumed during use can also be minimized. In other words, it is an energy-saving product. The Multi-Channel Jet model FL-600STW generates a very wide and powerful impact force. This nozzle is made of stainless steel 316L, allowing it to be used in high-temperature environments. The protruding tip of the nozzle prevents air from penetrating human skin. This nozzle complies with OSHA standards. *Lechler GmbH is a German spray nozzle manufacturer.*

  • Lechler_General-Industry _Air-Nozzles.jpg
  • Pneumatic Equipment
  • nozzle
  • nozzle
  • nozzle

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
PCD wear-resistant parts PCD nozzle (high hardness parts business)

PCD wear-resistant parts PCD nozzle (high hardness parts business)

Significantly reduce setup time due to parts deterioration! We support everything from current situation analysis and issue identification to solution proposals, parts supply, and effectiveness measurement.

Utilizing connection technology between different materials, only the wear-prone injection part is made of PCD. The body can be made of SUS or steel, and combinations with complex shapes are also possible. A dedicated jig achieves coaxiality within 3μm. - Body part: Steel, nozzle part: PCD connection technology - Hole diameter φ0.25mm, depth 1.2mm (PCD) - Position accuracy within 0.003mm *This product is a processing example of our "PCD wear-resistant parts." *For more details, please refer to the processing examples available for download in PDF format.

  • Other consumables
  • nozzle
  • Mounter
  • nozzle

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Motor-driven tank cleaning spray nozzle | Uniform rotary cleaning at low pressure

Motor-driven tank cleaning spray nozzle | Uniform rotary cleaning at low pressure

The "RJ3-MD" series features motor-driven automatic cleaning nozzles that reliably remove dirt with high cleaning power. It is available in both low-pressure and high-pressure specifications.

The RJ3-MD series features a motor-driven rotating cleaning nozzle that can be selected from two types: air motor and electric motor, delivering powerful cleaning performance with stable low-speed rotation. A new low-pressure nozzle has been added to the lineup, providing a rich flow rate approximately three times that of the high-pressure version for effective cleaning. The RJ3-MD series thoroughly cleans the entire tank surface and reliably removes stubborn dirt from reaction vessels and other equipment. It also withstands temperatures up to 90°C, making it suitable for use in relatively high-temperature environments, ideal for cleaning processes in the food, chemical, and pharmaceutical industries. *We also offer a wide range of other spray nozzles. For quotes, custom requests, or any inquiries regarding nozzles, please feel free to contact us. Phone and online consultations are available at any time.

  • nozzle
  • nozzle

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
【ABLIC：S-8261AAMMD-G2MT2U】

【ABLIC：S-8261AAMMD-G2MT2U】

【Support for Electronic Component Procurement】 We support the urgent procurement of discontinued products (EOL products) and hard-to-obtain electronic components and semiconductors! We have established a thorough inspection system.

Are you looking for this model number product? ■Manufacturer: ABLIC ■Model Number: S-8261AAMMD-G2MT2U Owen Corporation quickly procures electronic components that have become difficult to obtain due to production discontinuation or delivery issues from a global network. We will definitely issue a quotation, so you can confirm the details before placing an order, giving you peace of mind. Veteran inspectors who have monitored market distribution inventory for over 20 years conduct inspections, and only products that pass are shipped. All delivered items come with an inspection report. 【Our Inspection System】 ■X-ray Inspection Non-destructive testing to check internal structures and detect counterfeit or inferior products. ■Microscope Careful examination of lead bending and any discrepancies in printed fonts. ■Digital Caliper Dimension measurement in 0.01mm increments to detect cleverly crafted counterfeits. ■Curve Tracer Displays the voltage and current characteristic waveforms between terminals on the screen to detect defective products. ★Please visit our website from the link below. ★You can view our company brochure from the download button below. ▼For other model numbers you can inquire about, please refer to the lineup below.

  • others
  • nozzle

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Tank cleaning spray nozzle | Stable and powerful rotating cleaning driven by a motor

Tank cleaning spray nozzle | Stable and powerful rotating cleaning driven by a motor

The "RJ3-MD" series features low-speed rotation, ensuring stable straight-line performance while effectively removing dirt with its high cleaning power, thanks to its motor-driven automatic cleaning nozzle.

The motor-driven rotating cleaning nozzle, available in two types: air motor and electric motor, demonstrates powerful cleaning capability with stable low-speed rotation. It cleans the entire tank evenly and effectively removes stubborn dirt from reaction vessels and other surfaces. Additionally, it can withstand temperatures up to 80°C, making it suitable for use in relatively high-temperature environments, and is ideal for cleaning processes in the food, chemical, and pharmaceutical industries. *We also offer a wide range of other spray nozzles. For quotes or custom requests, please feel free to contact us with any concerns regarding nozzles. Phone and online consultations are available at any time.*

  • nozzle
  • nozzle

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Search Keywords Related to nozzle

COPYRIGHT © 2001-2026 IPROS CORPORATION ALL RIGHTS RESERVED.