Last Updated： Aggregation Period:Sep 17, 2025～Oct 14, 2025
This ranking is based on the number of page views on our site.
91～105 item / All 176 items
"Lechler" enables effective foam cleaning at low pressure!
A major feature of the 594/595 series nozzles is the foam spray! Since they are certified by EHEDG, they can be used not only for cleaning inside tanks but also for cleaning within the plant. They are one of the nozzles that perform effective cleaning even at low pressure. *Lechler GmbH is a German spray nozzle manufacturer.
It's convenient to attach it to the end of a hose when combined with an electric pump or air pump! The gun nozzle automatically stops when it's full.
"Auto Stop Gun Nozzle Series" ATNH-20 (25) (for light oil and kerosene) ATNH-FA (for light oil and kerosene / exclusive for FA-100) *Cannot be used with oil, gasoline, or biodiesel. ◎ Stops without using electricity or batteries This nozzle automatically stops when full, using a liquid level sensor without electricity or batteries. The auto stop functions at a constant flow rate and pressure, so it cannot be used with gravity drop. *Please pay attention to the usage pressure and flow rate range. 《Benefits》 ● Easy operation at your fingertips ● Automatically stops when full 《Features》 ● Dispenses when gripped, stops when released ● Includes lever hook ● Not usable with natural drop or siphon methods
Efficient operation is possible with low air consumption.
The jet nozzle is a blow nozzle that can be used simply by connecting it to a compressed air line. It is a model that emphasizes airflow, equivalent to direct blowing with pipes of 2 to 4 mm in diameter. By drawing in surrounding air to create amplified air, it allows for efficient operation with low air consumption. -------------------- The Ariake Satellite Showroom is based on the concept of "seeing," "touching," "comparing," and "confirming," and displays approximately 3,000 items, including plastic piping components and pneumatic equipment that can be used simply by connecting to compressed air. The location is the TFT Building, close to Tokyo Big Sight. It is convenient to stop by while attending an exhibition. ▼ Access 〒135-0063 Tokyo, Koto-ku, Ariake 3-6-11, TFT Building, East Wing, 8F
Pinpoint blow nozzle focused on propulsion.
The hall nozzle is a blow nozzle that can be used simply by connecting it to a compressed air passage. It is a model focused on propulsion power, equivalent to direct blowing with pipes of 2 to 4 mm in diameter. It is recommended for cases where pinpoint power is needed, such as the removal of cutting powder clogged in holes. ーーーーーーーーーー The Ariake Satellite Showroom is based on the concept of "seeing," "touching," "comparing," and "confirming," showcasing approximately 3,000 items of plastic piping components and pneumatic equipment that can be used simply by connecting to compressed air. The location is the TFT Building, close to Tokyo Big Sight. It is convenient to stop by while attending an exhibition. ▼ Access 〒135-0063 Tokyo, Koto-ku, Ariake 3-chome 6-11, TFT Building, East Wing, 8F
Even with a resin material, it has passed wear resistance tests with continuous spraying for over 1,000 hours at an air pressure of 300 kPa!
The "Miracle Fog MINI MF008C" is a unique nozzle made of molded resin that shares both internal and external mixing principles. It achieves a stable spray pattern without disturbances or droplets over a wide range of air pressures from 30 kPa to 500 kPa. It can easily spray low-viscosity liquids. In particular, even at the minimum air pressure of 30 kPa, the average particle diameter is 22 μm, and at 300 kPa, it is below 10 μm. (At an air pressure of 300 kPa and a suction height of 500 mm, the average particle diameter is 7 μm.) Although it is a molded resin product, it has high molding accuracy, with a variation in spray volume of ±8%, and we can accommodate custom requests for ±3%. 【Overview】 ■ Nozzle Name: Miracle Fog MINI ■ Model Number: MF008C ■ Spray Principle: Air Spray *For more details, please download the PDF or feel free to contact us.
A spray nozzle for tank cleaning that can be used at low pressure! It has excellent corrosion resistance and is suitable for tank cleaning with acidic and alkaline cleaning solutions!
A rotating spray cleaning head for tank cleaning that can spray in a full 360°. Made from PTFE (resin) with excellent chemical resistance and corrosion resistance, it can handle both acidic and alkaline cleaning agents. By pressurizing the cleaning solution, the spray nozzle rotates, providing efficient cleaning power even at low pressure. It can be used for cleaning the inner walls of various filling machines and tanks in pharmaceuticals, food, and chemicals. 【Features】 ■ Capable of full 360° spraying! ■ Efficient cleaning power even at low pressure! ■ Excellent chemical resistance and corrosion resistance! ■ Suitable for both acidic and alkaline cleaning! 【Customizable Options Available】 We can accommodate requests for original nozzles tailored to your tank, beyond standard products (other than the 360° type). Customization is possible to fit specifications such as mounting on pipes or flanges and adjusting spray positions, so please feel free to consult with us. 【Rental Service Available!】 If you are considering implementation, please take advantage of our free demo unit rental service first. Quick performance evaluation is possible. Please apply through the link below: "Apply for Rental Service Here."
A rotating nozzle suitable for tank cleaning that uses PTFE (resin) as the material and can handle both acidic and alkaline cleaning agents.
A rotary spray cleaning head for tank cleaning that allows the spray nozzle rotating body to rotate and spray around the entire circumference by pressurizing the cleaning solution. It can be used for cleaning the inner walls of various filling machines, as well as the inner walls of tanks in pharmaceuticals, food, and chemicals. We can accommodate requests for original nozzles tailored to your tank, beyond standard products (other than the 360° type). Customization is possible to fit specifications, such as mounting on pipes or flanges and adjusting the spray position, so please feel free to consult with us. ★Demo unit rental service currently available★ We are offering a demo unit rental service for PTFE rotary nozzles. Please use it as a reference for performance verification and specification determination before introduction. For more details, please contact us using the form below. 【Features】 ■ Can spray around the entire circumference (360°) ■ Efficient cleaning power even at low pressure ■ Excellent chemical resistance and corrosion resistance ■ Suitable for both acidic and alkaline cleaning For more details, please contact us or download the catalog to view.
Adjustable spray direction! A fan-shaped nozzle that generates a fan-shaped spray with a Yamagata flow distribution.
The "Yamagata Distribution Nozzle (with Flexible Joint) UT+VP" can generate a fan-shaped spray with a Yamagata flow distribution, where the center is strong and gradually weakens towards both ends. The VP nozzle with a ball joint is integrated with a ball for direction change, allowing the spray direction of the nozzle to be adjusted to less than 40°. It consists of a nozzle, cap, and adapter, with the nozzle's outlet made of ceramic. 【Features】 - Generates a fan-shaped spray with Yamagata flow distribution - Spray pattern is strong in the center and gradually weakens towards both ends - Spray direction of the nozzle can be adjusted to less than 40° - The nozzle's outlet is made of ceramic - Composed of a nozzle, cap, and adapter For more details, please contact us or download the catalog.
Generates a homogeneous and ultra-fine mist! A two-fluid filled conical nozzle that produces fine mist and mist.
The "Full Cone Nozzle (Large Spray) AKIJet(R)" is a collision type nozzle that further collides atomized droplets created by internal mixing to achieve homogenization and atomization, generating fine mist and fog. It is a two-fluid full cone nozzle composed of multiple parts including the nozzle body, adapter, and strainer. There are two types: a liquid pressurization type that supplies liquid to the two-fluid nozzle under pressure, and a suction type that draws liquid up and sprays it using the force of compressed air. 【Features】 ○ Generates ultra-fine mist through ultrasonic waves during collision ○ A two-fluid full cone nozzle that produces fine mist and fog ○ Capable of generating a homogeneous and fine mist ○ Suction type that does not require a pressurization device (can also be used with liquid pressurization) For more details, please contact us or download the catalog.
Convenient when attached to the end of a hose in combination with electric pumps or air pumps for solvents! The gun nozzle automatically stops when full.
◎Stop without using electricity or batteries This is a nozzle that automatically stops when the liquid level is detected to be full, without using electricity or batteries. The auto-stop function operates at a constant flow rate and pressure, so it cannot be used with gravity drop. *Please pay attention to the operating pressure and flow rate range. 《Advantages》 ● Easy operation at hand ● Automatically stops when full 《Features》 ● Dispenses when gripped, stops when released ● Includes a lever hook ● Not usable with natural drop or siphon methods
It is convenient to attach it to the end of the hose when combined with an electric pump or air pump for solvents.
"Merits" ● Easy operation at your fingertips ● Usable even with self-weight drop * Please pay attention to the operating pressure. "Features" ● Dispenses when gripped, stops when released ● Equipped with a lever hook
Even if the situation of the cleaning target changes, the spray pattern can be adjusted!
The "Rotary Barrier Nozzle RV-100" is a cleaning nozzle that can be used while working with both hands. It features a stop mechanism and can be used for general cleaning purposes. Even if the conditions of the cleaning target change, by simply rotating the intermediate grip within 90°, the spray pattern can change from a streamlined straight to a full cone. Additionally, by attaching a flat use adapter, it is now possible to set the spray from straight to flat. 【Features】 ■ By rotating the intermediate grip within 90°, the spray pattern can change from a streamlined straight to a full cone. ■ By attaching a flat use adapter, it is possible to set the spray from straight to flat. *For more details, please refer to the PDF document or feel free to contact us.
High flow hollow cone type spray nozzle
The 【TYPE-NF】 is a PP (polypropylene) spray nozzle of the hollow cone spray type. It was developed as an enlarged version of TYPE-NF. Compared to other hollow cone types, the particles are larger, and the flow rate is higher, making it ideal for large-volume cooling, humidifying, and defoaming. It is also suitable for air cleaning and washing in large-volume air washers and scrubbers, as well as for irrigation in large-scale agriculture and livestock, and for defoaming in wastewater treatment plants. Being made of resin, it is resistant to acids and alkalis, making it suitable for surface cleaning before painting or plating.
Super compact type! A small spray fan-shaped nozzle with an even flow distribution across the entire area.
The "Fan-Shaped Nozzle (Fine Mist / Ultra Compact) SCBIMV.S" consists of four components: nozzle tip, core, cap, and adapter, and is a two-fluid fan-shaped nozzle that generates a fine mist with an average particle diameter of less than 30μm. It is an internal mixing type that atomizes by mixing compressed air and liquid inside the nozzle. (Compressed air flows in the center of the nozzle, while liquid flows around the periphery in an internal mixing air type.) It is a suction type that draws up the liquid and sprays it using the force of compressed air. 【Features】 ○ Uniform spray pattern with consistent flow rate across the entire area ○ Minimum spray flow rate among two fluids ○ Ultra compact design with a total length of approximately 42mm ○ No need for a device for liquid pressurization ○ Equipped with ON-OFF control function For more details, please contact us or download the catalog.
It can be connected to a hot air generator and used with high-temperature hot air.
This is a nozzle designed primarily for applications such as draining and drying the inner walls of tubular materials (pipes, tubes, etc.). 【Features】 - Standard products available from a small diameter of Φ20 to Φ90 for the discharge lip - Stable performance from low wind speeds up to 160 m/s - Nozzle specification: 0.3 to 0.5 mm - Inlet: PS1/4”・3/8” (internal thread)
