Last Updated： Aggregation Period:May 27, 2026～Jun 23, 2026
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:May 27, 2026～Jun 23, 2026
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:May 27, 2026～Jun 23, 2026
This ranking is based on the number of page views on our site.
361～390 item / All 731 items
This is a sensor probe of a capacitive displacement gauge that can measure displacement non-contactly.
It has features such as high-speed response, frequency characteristic switching, and output inversion capability. It is ultra-compact and low-cost, making it ideal for device integration.
A pedestal cut type that has been made this small and allows for high-precision wind speed measurement has arrived! Perfect for measuring wind speed in narrow spaces where measurements were previously given up!
A new cut-base type has been introduced for the ultra-compact adhesive wind speed and temperature probe "QB Series." The base of Φ7mm (QB-5) has been further reduced in size to an oval type measuring 4mm in width and 5.5mm in length. With the calibration of the conventional anemometer body, high-precision wind speed measurements are possible. It can be used for various applications, including wind speed measurements in narrow spaces that were previously given up on, multi-point wind speed distribution measurements, and thermal cooling analysis in product development. 【Features】 ■ Ultra-compact ■ Cut-base type ■ High-precision wind speed measurement possible ■ Usable for various applications *For more details, please refer to the PDF document or feel free to contact us.
I was unable to do thermal design, cooling effect analysis, simulation result verification, and measuring wind speed distribution in narrow gaps, but now it's possible!
We would like to introduce the "High-Temperature Multi-Point Anemometer / Ultra-Compact Adhesive Anemometer and Temperature Probe" handled by Tonic, which manufactures and sells anemometers, airflow meters, and wind speed sensors. We have made it possible to conduct thermal design, cooling effect analysis, simulation result verification, and wind speed distribution measurement in narrow gaps, which we previously thought was impossible. Using the high-temperature adhesive anemometer and temperature probe, we offer a high-temperature multi-point anemometer measurement system "PtY-160DA" capable of simultaneous measurement of up to 16 channels, along with models such as "PtY-10DA/40DA." 【Features】 <PtY-160DA> ■ Capable of simultaneous measurement of up to 16 channels ■ Wide measurement range: wind speed from 0.2 to 30 m/s, wind temperature from 0 to 120℃ ■ Equipped with an RS232C port on the main unit ■ Wind speed and temperature for specified channels can be displayed on the main unit ■ By using monitoring software for multi-point anemometers, monitoring and logging on a PC is also possible *For more details, please refer to the PDF document or feel free to contact us.
A beginner's guide to oscilloscopes. Explaining the basics of probes that you need to know for accurate measurements.
This document provides an easy-to-understand introduction to the basics of probes for beginners using oscilloscopes, complete with diagrams and illustrations. It is filled with essential information for accurate measurements, such as "Points to note when connecting coaxial cables," "Important points regarding probe performance," and "How to handle a 10:1 passive probe." 【Table of Contents (Excerpt)】 ◎ Ways to extract signals that should not be done ◎ What it means to transmit signals ◎ Understanding the basic 10:1 passive probe ◎ Caution! 1:1/10:1 sensitivity switching probes ◎ How much frequency bandwidth is actually necessary ◎ Wait a minute! That connection ◎ Active probes are closer to the ideal probe ◎ Increasingly common differential signals *This document can be viewed via "PDF Download."
Detachable sensor element
High-precision all-in-one probe with a minimum resolution of 1μm.
Flange-shaped all-in-one sensor
Introducing the controller-integrated probe "GYAF1 Probe."
A slim head sensor with a thickness of 36mm in the head section.
This is an introduction to the "GYMR5 Probe" handled by Santesuto Corporation.
Instead of conventional stainless steel, polyolefin resin is used for the rod material.
This is an introduction to the "GYSE-FX Probe" handled by Santesuto Corporation.
![[Model GY Series] Option: High-Temperature Sensor Rod Type](https://image.mono.ipros.com/public/product/image/c03/85380049/IPROS_10633134080686731000.jpg?w=280&h=280)
High-temperature resistant probe (rod section) with heavy-duty specifications
High-Temperature Probe for Sensor Rod Section - Model GY Series Option
Compact pressure-resistant explosion-proof liquid level gauge and displacement meter with a built-in probe element in the sensor.
The EX-GYdT type probe is a pressure-resistant explosion-proof liquid level gauge and displacement meter that incorporates GYcRP/GYcRS (separate controller) type probes or GYLS/GYLT (integrated controller) type probe elements. By making the head section a sealed structure, it achieves waterproof performance while also being compact. The model with GYcRP/GYcRS probe elements can be used in combination with a controller to obtain analog or digital output. The explosion-proof marking is ExdIICT6, making it suitable for use in almost all explosive gas atmospheres. For more details, please contact us or download the catalog.
High current compatible / wideband current probe
With the increase in the capacity of power transmission systems and the expansion of electronics in automobiles and railways, current measurement is also being required to accommodate large currents. There are two methods for measuring current: one involves breaking the circuit, and the other uses sensors to measure without breaking the circuit. The method that breaks the circuit allows for wideband measurement and provides highly accurate data, but it is not easy to break large current circuits and can sometimes be dangerous. In contrast, the clamp-type probes that are inserted into the circuit wiring are extremely easy to operate and allow for safe measurements. The newly released "SS-260/SS-270" are current probes that support 150A/500A, enabling a wide range of proposals when combined with our oscilloscopes or with a separately sold dedicated power supply for use in isolation systems. Additionally, in conjunction with this release, we have added a power supply option for current probes to the previously released "Digital Oscilloscope ViewGo DS-5500 Series."
Direct probing of the current waveform of the IC leads mounted on the substrate. Probing the current waveform flowing through a wide bus bar.
The Iwatron Logosky coil current probes come in two series: the SS-280A series, which features a thin and flexible sensor capable of directly probing IC leads, and the SS-290 series, which has a longer sensor that can also probe busbars. The operating temperature range is from -40°C to 125°C, making them suitable for use in constant temperature chambers. They are ideal for high current switching tests of power semiconductors and for observing switching current waveforms in inverters, making them perfect for power electronics development.
Achieving a 400MHz wide bandwidth! A differential probe that also features a high common mode signal rejection ratio.
The "BumbleBee" from Germany's PMK, which we handle, is a wideband, high-voltage differential probe that boasts a class-leading bandwidth of 400MHz and a common-mode rejection ratio of 100kHz/70dB. It enables balanced measurements with oscilloscopes in the 500MHz range and provides clean waveforms without noise. Additionally, it supports differential inputs of up to 2kV, allowing for high-voltage measurements to be conducted with ease. 【Features】 ■ Achieves class-leading bandwidth and common-mode rejection ratio ■ Supports four attenuation ratios: 50:1, 100:1, 250:1, and 500:1 *For more details, please download the catalog or contact us.
High voltage up to 100kV, high frequency of 100MHz, long cables up to 30m.
We can observe high-voltage, high-frequency waveforms from devices such as circuit breakers, transformers, and inverters, and we also have long cables available.
Achieves high input resistance (1MΩ) and low input capacitance.
With the purchase of WaveRunner 6Zi, the ZS series is currently available for free. Campaign ongoing! (Until September 27, 2013) https://www.ipros.jp/product/detail/2000147889?secure=true The ZS series achieves both high input resistance (1MΩ) and low input capacitance (<0.6pF or <0.9pF), reducing circuit loading across all bandwidths of the probe. The ZS series features low circuit loading and a compact design that allows probing in tight spaces, enabling probing of various types of signals and connection points at any time.
Comprehensive catalog edited by a manufacturer specializing in ultrasound examination probes [free of charge]. For anything related to ultrasound probes, please contact us.
Our company was established in August 1979 as a specialized manufacturer of ultrasonic testing probes. We offer a wide variety of products, and in addition to standard manufacturing and sales, we also accommodate custom orders starting from one piece. Since our founding, we have been manufacturing and selling various ultrasonic probes, ultrasonic sensors, and ultrasonic pulser-receivers as essential tools for non-destructive testing in "manufacturing" and "maintenance inspection." <Contents> 〇 Various Probes (Transducers) ・Angle probes ・Vertical probes ・Immersion probes ・Broadband probes ・Composite probes ・Special probes, etc. 〇 Ultrasonic Pulser-Receiver 〇 Inspection Equipment ・Non-contact, air-coupled ultrasonic inspection equipment 〇 Ultrasonic Propagation Simulator and more ■□■□■□■□■□■□■□■□■□■□■□■□■□■□ ★We offer a comprehensive catalog for your reference, which is available free of charge, so please feel free to request it.
Ultrasonic transducers optimal for phased arrays and aperture synthesis.
Linear array probes optimized for phased arrays and aperture synthesis composed of numerous elements. 【Features】 - Unique manufacturing method by Japan Probe: Achieves ultra-small element size of 0.3mm to micro matrix arrays Wideband waveform - High frequency support up to 15MHz - Multi-channel support up to 1024CH - Compatible connectors: Hypertronics, ITT Cannon, TYCO, IPEX - Various shapes: Flat, curved, spherical - High temperature resistance - Others Various wedges (shoes) for arrays, conversion and extension cables are also available. ● For other specifications and details, please download the catalog.
We have probes available that can withstand temperatures up to 500℃.
- Until now, high-temperature probes have only had heat resistance at the contact part, but our probes have heat resistance in the connectors and coaxial cables as well, allowing for long-term use in high-temperature environments. - Heat-resistant specifications: 300℃ specification coaxial cable (using polyimide resin for the insulation layer, providing flexibility) 500℃ specification coaxial cable (using ceramic mesh for the insulation layer, ensuring high reliability). For other specifications, please inquire individually. Additionally, our company handles many custom probes, so we will develop prototypes tailored to your needs.
Ultrasonic probe (transducer) that adheres like an octopus.
This single unit enables inspection of flat surfaces, curved surfaces, and three-dimensional curved surfaces of the test subject. No wedge is required.
It is an ultrasonic probe "Dry Probe" that fits flexibly and does not require a contact medium.
The ultrasonic dry couplant and flexible probe "Dry Probe" is an ultrasonic probe that enables flaw detection and measurement in a dry state due to its uniquely developed matching layer. Furthermore, by incorporating slits into its two-layer structure, which consists of a flexible composite transducer and damping material, the probing surface becomes soft and fits three-dimensional curved surfaces. Additionally, the "Dry Probe" is designed for convenience, allowing it to be used with general-purpose ultrasonic flaw detectors.
Support for micro-machining at the φ0.05 level! A consistent manufacturing system from high-precision machining to surface treatment.
The "contact probe" is a component used for probe pins in the electrical inspection process of semiconductor wafers and IC packages. It achieves stable processing accuracy even with extremely small diameters and short dimensions, making it suitable for fine electrodes and precision contact parts. It balances short delivery times and quality stability through in-house completion, minimizing variations between processes. Additionally, it ensures both signal stability and durability through heat treatment and various plating processes (Ni-P, Au, AuCo, Pd, Rh), achieving contact reliability and long lifespan in high-frequency and microcurrent measurements. 【Features】 - Supports precision cutting processing from a material diameter of φ0.6mm - Numerous manufacturing achievements for fine parts with a minimum processing diameter of φ0.05 and a total length of less than 1mm - Drilling processing can accommodate a minimum diameter of φ0.1 - Thickness specifications can be accommodated for various platings such as Ni-P, Au, PdCo, and Rh, and heat treatment is also supported - A comprehensive in-house system from high-precision processing to surface treatment - By collaborating with our inspection company located overseas, we have established a high-quality system that meets global quality standards *For more details, please feel free to contact us.
Digital communication function included! Oil moisture meter probe.
● A sensor with excellent long-term stability and contamination resistance ● Easy-to-install structure ● Available with RS485 interface ● Displays measurement data in conjunction with Sigma 05 ■ The MOP301 can accurately measure the moisture content in insulating oils, lubricating oils, diesel fuels, and more. It is ideal for preventive maintenance of equipment machinery. In addition to accurate measurements of moisture activity [aw] and temperature [T], the MOP301 can calculate the absolute moisture content in oil in ppm. This calculation is based on the specific solubility parameters of the oil.
A probe that can measure even in harsh environments up to 20 bar and 120℃.
● Modbus RTU with RS485 ● Excellent long-term performance even in dusty and dirty environments ● Pressure resistance up to 20 bar ● Wide temperature range -40 to +120°C The HTP501 can reliably measure relative humidity (RH) and temperature (T) in industrial process control applications in harsh environments up to 20 bar. In addition to measuring relative humidity (RH) and temperature (T), the HTP501 can calculate all humidity-related physical quantities such as dew point temperature (Td), absolute humidity (dv), and mixing ratio (r).
Long-term stability! Probe-type humidity and temperature sensor.
● High-precision humidity (RH) and temperature (T) measurement ● Plug-in and replaceable ● Excellent long-term stability ● Very low power consumption ● Digital output ■ The EE07 is suitable for general air conditioning management and OEM applications, utilizing the proven E+E HC105 humidity (RH) sensor. This sensor is available with a polycarbonate housing and a metal housing, as well as a probe for temperature (T).
A lineup of products with spring pressure (2/3 stroke) ranging from 6g to 90g.
At Miyashita Spring Manufacturing Co., Ltd., we design, manufacture, and sell spring contact probes for inspection parts. We offer two products with spring pressures of 26g and 20g (0.3 stroke) and eleven products with spring pressures ranging from 6g to 90g (2/3 stroke). The materials (surface treatments) are as follows: plunger: SK material (gold-plated for the fork), spring: piano wire (gold-plated) or stainless steel, barrel: phosphor bronze (gold-plated) or brass (gold-plated), and receptacle: phosphor bronze (gold-plated) or brass (gold-plated). For more details, please contact us or refer to our catalog.
High current probe
**Overview** The contact part is made of a silver alloy with good conductivity. Depending on the size, it can handle currents from 15A to 300A. In the case of high current conduction, unexpected events may occur at the probe tip and the surface of the workpiece due to heat generated from contact resistance. Please consult us in advance for high current applications. Additionally, please refer to this for considerations during selection. We offer four types for high current applications. ● CP Series → The tip material of the general-purpose CP series is AgW. ● CPM Series → The bush section is a nut-type with threaded processing. ● CPMM Series → A large probe capable of conducting over 70A. ● Coaxial Type → A probe compatible with high current that allows for four-terminal measurements. Approximate dimensions are displayed in the downloadable materials. We accept custom orders for size changes and other requests, so please contact us.
High temperature and low temperature probe
【Overview】 The heat resistance temperature varies by size, but it can be used at temperatures ranging from 150°C to 300°C. ● CPU Series → Equipped with heat-resistant springs in the general-purpose CP series. ● CPE Series → A heat-resistant probe made of resin with carbon in the bush part. ● CPUSK Series → A heat-resistant probe with SK material in the bush part. ● CPUM Series → A screw-fixed type with threaded processing in the bush part. ● CPUEM Series → A screw-fixed type with resin in the bush part and threaded processing. Approximate dimensions are displayed in the PDF. The PDF file shows pages for CP, CPE, CPSK, CPM, and CPEM. The CPU series will have the same dimensions. ★ We also accept requests for custom specifications, so please contact us.
To prevent malfunctions caused by heat generation on the production line!
Using contact probes, actual current is applied. The heating temperature and resistance value during the application of current are measured. In order to conduct current application experiments with actual electrodes, we can provide suggestions for contact probes suitable for mass production lines and even support prototypes. 【Benefits of Using Our Services】 ■ Anticipate potential issues that may arise before mass production ■ Understand the optimal conditions for contact probes tailored to each product ■ Implement measures to prevent overheating during mass production ■ Reduce costs during mass production *You can observe the experimental process. Please feel free to contact us!
