We have compiled a list of manufacturers, distributors, product information, reference prices, and rankings for resin.
ipros is IPROS GMS ・ IPROS One of the largest technical database sites in Japan that collects information on.

resin(pa) - List of Manufacturers, Suppliers, Companies and Products | IPROS GMS

Last Updated： Aggregation Period:Jul 22, 2026～Aug 18, 2026
This ranking is based on the number of page views on our site.

resin Product List

181～190 item / All 190 items

Displayed results
Breathable polyurethane for stretchable devices 【Prototype】

Breathable polyurethane for stretchable devices 【Prototype】

Introducing the heat-curing type! A breathable polyurethane resin with improved "solvent resistance" and "restorability" performance! Suitable for wearable device applications!

This product is a prototype of "Polyurethane Resin for Functional Films" created by the Functional Coating Division of Arakawa Chemical Industries, Ltd. It imparts moisture permeability to a polyurethane resin that excels in flexibility, and successfully achieves film formation with solvent resistance and resilience through heat curing. This product is gaining attention as a substrate for wearable devices and bio-centers. 【Features】 ■Viscosity (mPa·s): 3000 ■Non-volatile content (%): 70% ■Solvent composition: Toluene/Ethyl acetate = 1/1 ■Film strength and moisture permeability can be adjusted according to your requirements. *For more details, please refer to the PDF document or feel free to contact us.

  • Coating Agent
  • Other polymer materials
  • resin

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
[Market Report] Global Molding Materials Market

[Market Report] Global Molding Materials Market

The global molding materials market is expected to reach 17.16 billion USD by 2031.

The global molding materials market is expected to experience significant growth, with revenues reaching $10.6 billion in 2022. According to recent market research, the market is projected to expand at a compound annual growth rate (CAGR) of 5.5% during the forecast period from 2022. By 2031, it is estimated to ultimately reach $17.16 billion. Molding materials, known for their excellent properties, are versatile composites that are seeing increased demand across various industries, including automotive, electrical, industrial, electronics, and aerospace. Molding materials are composites formulated from a blend of silica, epoxy resins, phenolic resins, polyesters, pigments, and other additives. These compounds exhibit a range of properties such as high strength, heat resistance, corrosion resistance, and dimensional stability. As a result, molding materials are widely used in the manufacturing of parts and products that require durability, reliability, and precision. For application methods, please check the [PDF download] button or apply directly through the related links.

  • others
  • resin

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
[New Development] Two-component Room Temperature Curing Epoxy Resin TE-6420FR

[New Development] Two-component Room Temperature Curing Epoxy Resin TE-6420FR

Room temperature curing × high heat resistance × flame retardant V-0 equivalent! Epoxy resin for sealing electrical and electronic components. No heating equipment required! Contributes to energy savings with room temperature curing type.

"TE-6420FR" is a two-component, room temperature curing epoxy resin developed for the encapsulation of electrical and electronic components. It does not require heating equipment and can cure at 25°C, achieving an energy-efficient and effective working environment. This product features a low viscosity design with a mixing viscosity of approximately 2,000 mPa·s (25°C), allowing excellent filling capability for intricate details and accommodating complex component shapes and filler-less encapsulation. The curing conditions can be flexibly selected as 25°C for 6 hours, 40°C for 3 hours, or 50°C for 1 hour. 【Features】 - Room temperature curing type (no heating operation required, caution with heat generation), efficient short curing time - Low viscosity design suitable for precise filling - High heat resistance: Tg 126°C - Flame retardant: UL94 V-0 equivalent (5mm thickness) - High insulation: Volume resistivity > 1×10^15 Ω·cm *For more details, the product's specification sheet is available for download as a PDF from the link below, or you can contact us for more information. *Samples are also available, so please contact us if needed.

  • Other polymer materials
  • resin

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
NK OPTIMER (General Overview)

NK OPTIMER (General Overview)

UV-Curable Optical Materials for NIL and Advanced Photonics

This is a solvent-free photo-curable resin suitable for creating fine optical elements from the μm to nm order using imprint technology. It is a material suitable for imprinting without solvents. It can also accommodate solvent-diluted thin films in the nm order. It has excellent spin-coating suitability. Low curing shrinkage. High heat resistance (solder reflow resistance). High transparency. Can be prepared with nD 1.46 - 1.68. For more details, please refer to the brochure or contact us.

  • plastic
  • resin

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
[Newly Developed Product] UV-Curable Epoxy Acrylate TRU-0153K

[Newly Developed Product] UV-Curable Epoxy Acrylate TRU-0153K

UV-curable urethane acrylate that balances transparency and durability. It has low viscosity and low hardness, providing flexibility and is effective for stress relief.

"TRU-0153K" is a one-component UV-curable urethane acrylate resin developed for the coating of electronic components. It can be cured in a short time using metal halide lamp irradiation (1,500 mJ/cm²), demonstrating high productivity even in mass production processes. This product has a low viscosity of 1,300 mPa·s and low hardness (Shore A35), providing flexible properties that relieve stress and prevent crack formation. Furthermore, it shows no change in hardness even after high-temperature testing at 150°C for 1,000 hours and 1,000 cycles of thermal cycling between -40°C and 150°C, exhibiting excellent moisture and heat resistance and durability. It balances high insulation and flexibility. 【Features】 ■ One-component UV-curable urethane acrylate resin ■ Short curing time (UV: 1,500 mJ/cm²) ■ Low viscosity and low hardness (Shore A35) with flexibility, effective for stress relief ■ No change in hardness after 150°C for 1,000 hours and -40°C to 150°C for 1,000 cycles *For more details, the product specification sheet is available for download as a PDF below, or please contact us. *Samples are also available, so please contact us if needed.

  • Other polymer materials
  • resin

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
ポリエステル樹脂（PE）の溶解加工（小ロット対応）

ポリエステル樹脂（PE）の溶解加工（小ロット対応）

PE（バイロン：VYLONR）の溶解加工サービス。最小50Lから最大3,000Lまで需要や目的に応じたOEMが可能です。

中央樹脂化学では、有機溶剤を使ったゴムや樹脂の溶解加工に特化したサービスを提供しております。 板状原料（ポリエステル樹脂など）も、独自の技術で安全に溶解加工が可能です。 【中央樹脂化学の溶解加工の特長】 ■小ロット：最小50ℓから最大3,000ℓまで、お客様の需要や目的に応じた溶解加工が可能 ■コンタミ対策：品替え毎に撹拌釜を「分解洗浄」することで、「溶剤洗浄」では洗いきれない前残を除去 高粘度品や難溶品の溶解検討もご相談ください。 溶解スピードが遅いことにお困りの場合も、ゴムの前処理の技術などによって改善できます。 開発案件のお手伝いや一度きりのご依頼も、積極的に承ります。 ※テストのご相談はお気軽にお問い合わせください。 ※コンタミ対策やサービスの詳細はカタログをダウンロードしてご覧ください。

  • Organic Natural Materials
  • resin

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Design and Practice of Transparent Flame Retardant Resins, Combustibility Testing and Evaluation Criteria, Trends in UL Standards

Design and Practice of Transparent Flame Retardant Resins, Combustibility Testing and Evaluation Criteria, Trends in UL Standards

Flame retardant technology for the most difficult transparent resins (such as acrylic and polycarbonate).

Flame-Retardant Plastics with Transparency: Tests, Underwriters Laboratories, etc. ★ An explanation of the guidelines for flame-retardant technology of transparent resins (such as acrylic and polycarbonate), which is the most challenging among polymer flame retardancy, from basics to practical applications! ☆ Examples of combustion tests for transparent resin materials (combustion tests required for LED lighting) such as UL94, UL746C, UL60950-1, etc. ★ Explanation of reliable data based on ISO/IEC17025! 【Venue】 Kawasaki City Industrial Promotion Hall, 10th Floor, Conference Room 1【Kanagawa, Kawasaki】 Date and Time July 31, 2013 (Wednesday) 13:00-16:30

  • Company：AndTech
  • Price：10,000 yen-100,000 yen
  • Technical Seminar
  • resin

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
[English Market Research Report] Global Market for Carbon Thermoplastic Resins for Automotive Applications

[English Market Research Report] Global Market for Carbon Thermoplastic Resins for Automotive Applications

"Free samples" are currently being offered! Please check the application method from the [PDF download] button, or apply directly from the related links.

The market size for automotive carbon thermoplastic resins is expected to expand at a CAGR of 13.5% during the forecast period, growing from 522 million USD in 2023 to 983 million USD by 2028. This report investigates the global automotive carbon thermoplastic resin market, summarizing trends by resin type, application, region, and profiles of companies entering the market.

  • Other services
  • resin

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
ポリエステル樹脂（PE）の溶解加工（小ロット対応）

ポリエステル樹脂（PE）の溶解加工（小ロット対応）

PE（バイロン：VYLONR）の溶解加工サービス。最小50Lから最大3,000Lまで需要や目的に応じたOEMが可能です。

中央樹脂化学では、有機溶剤を使ったゴムや樹脂の溶解加工に特化したサービスを提供しております。 板状原料（ポリエステル樹脂など）も、独自の技術で安全に溶解加工が可能です。 【中央樹脂化学の溶解加工の特長】 ■小ロット：最小50ℓから最大3,000ℓまで、お客様の需要や目的に応じた溶解加工が可能 ■コンタミ対策：品替え毎に撹拌釜を「分解洗浄」することで、「溶剤洗浄」では洗いきれない前残を除去 高粘度品や難溶品の溶解検討もご相談ください。 溶解スピードが遅いことにお困りの場合も、ゴムの前処理の技術などによって改善できます。 開発案件のお手伝いや一度きりのご依頼も、積極的に承ります。 ※テストのご相談はお気軽にお問い合わせください。 ※コンタミ対策やサービスの詳細はカタログをダウンロードしてご覧ください。

  • Organic Natural Materials
  • resin

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Injection molding of high-performance resins such as PEEK, recycled resins, and biodegradable resins on a tabletop.

Injection molding of high-performance resins such as PEEK, recycled resins, and biodegradable resins on a tabletop.

Wide-ranging injection molding of resins, including thick-walled molding of PEEK, is possible.

We accommodate a variety of thermoplastic resins, including general-purpose resins, high-performance resins, eco-plastics, and special resins such as CIM, CFRTP, and GFRTP. We lower the barriers for prototyping and accelerate research and development. Additionally, we enable the recycling and utilization of plastic waste, contributing to resource circulation. For more details about the resins we offer, please refer to our catalog and website. Related link - https://www.centinno.co.jp/

  • Injection Molding Machine
  • resin

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Search Keywords Related to resin

IPROS Services
COPYRIGHT © 2001-2026 IPROS CORPORATION ALL RIGHTS RESERVED.