We have compiled a list of manufacturers, distributors, product information, reference prices, and rankings for resin.
ipros is IPROS GMS ・ IPROS One of the largest technical database sites in Japan that collects information on.

resin(tg) - List of Manufacturers, Suppliers, Companies and Products

Last Updated： Aggregation Period:Oct 15, 2025～Nov 11, 2025
This ranking is based on the number of page views on our site.

resin Product List

1～15 item / All 126 items

Displayed results
Resin, plastic materials melting point, Tg (glass transition temperature) measurement (DSC)

Resin, plastic materials melting point, Tg (glass transition temperature) measurement (DSC)

Evaluation of melting point (Tm), glass transition temperature (Tg), crystallinity, and specific heat is possible!

Our company conducts "Differential Scanning Calorimetry (DSC)" to evaluate the thermal properties of resin materials, such as melting point (Tm) and glass transition temperature (Tg). The measurement conditions are as follows: temperature range from -100°C to 400°C, measurement atmosphere is Air or N2, and the sample amount is 5mg. Additionally, when performing material qualification of polyethylene (PE), the melting point is measured using DSC, allowing us to determine whether the sample is LDPE (Low-Density Polyethylene) or HDPE (High-Density Polyethylene) based on the differences in melting points. 【Measurement Conditions】 ■ Temperature Range: -100°C to 400°C ■ Measurement Atmosphere: Air, N2 ■ Sample Amount: 5mg ■ Applicable Standards - JIS K7121 Transition Temperature (Melting, Crystallization, Glass Transition) - JIS K7122 Transition Heat *For more details, please refer to the related links or feel free to contact us.

  • Contract Analysis

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Liquid Bismaleimide Resin LMI-5000

Liquid Bismaleimide Resin LMI-5000

As an additive, it can be used to impart flexibility and is suitable for stress relief.

We have developed a liquid form of bismaleimide resin among the typically solid bismaleimide resins. By mixing it with materials that have previously had a Tg that was too high for processing, we can adjust it to a processable Tg and impart flexibility, thereby enhancing toughness.

  • Other polymer materials

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
High Absorbency Resin 'TG-SAP'

High Absorbency Resin 'TG-SAP'

Highly absorbent! A superabsorbent resin developed through special polymerization technology.

"TG-SAP" is a highly water-absorbent resin among superabsorbent polymers, developed through specialized polymerization technology, which can maintain its water retention capacity even under pressure. The water absorption capacity of superabsorbent polymers is significantly influenced by osmotic pressure. The presence of high concentrations of -COO⁻ ions and Na⁺ ions creates a difference in ion concentration between the interior of the superabsorbent polymer and the external aqueous solution, resulting in osmotic pressure that causes water to be absorbed into the superabsorbent polymer. 【Features】 ■ Superabsorbent polymer ■ Extremely high water absorption capacity ■ Maintains water retention even under pressure ■ Developed through specialized polymerization technology For more details, please refer to the catalog or feel free to contact us.

  • Plastic utensils and containers
  • others

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Examples of Suprem Film Molding

Examples of Suprem Film Molding

Introducing examples of film molding of Surprim, boasting low dielectric properties and high toughness, with Tg of 185°C and Tm of 323°C!

Here is an introduction to examples of film molding using "Saprime." "Saprime" is a thermoplastic polyimide resin that exhibits a balanced glass transition temperature (Tg 185°C) and melting point (Tm 323°C) compared to super engineering plastics such as PEEK and PEKK. It combines high strength, high heat resistance, high solvent resistance, low dielectric constant (2.66 at 10GHz), and easy moldability. It is a crystalline TPI that maintains a high glass transition temperature while lowering the melting point, making it suitable for a wide range of applications such as CFRP matrix resins, CFRP toughness modifiers, compounds, and electrical and electronic applications. 【Features】 ■ Low dielectric properties ■ Low water absorption ■ High visibility ■ High toughness ■ High Tg (185°C) ■ Crystalline film *For more details, please refer to the PDF materials or feel free to contact us.

  • Other polymer materials

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
【PA4T PPA】ForTii

【PA4T PPA】ForTii

PPA with high mechanical properties and excellent chemical resistance.

ForTii features a unique PPA technology with a high amide density. The ForTii platform includes polymers with the highest crystallinity, highest melting point, and highest glass transition temperature among all PPAs, providing the following characteristics: - Best mechanical properties of components below 160°C - Best peak temperature performance - High chemical resistance

  • Other Auto Parts
  • Engine parts
  • Automotive Connectors

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Taiwan Elite Material Co. Ltd. (EMC)

Taiwan Elite Material Co. Ltd. (EMC)

Morimar SSP Co., Ltd. is the primary agent for Elite Material Corporation (EMC) in Taiwan. For more details, please contact us.

Sales of materials by Elite Material Co. Ltd. (EMC) Main lineup of CCL ■EM-528 ■EM-528K ■EM-890 ■EM-890K ■EM-892K ■EM-370(5) ■EM-370(Z) Others Shielding boards are also available. For more details, please download the materials or contact us.

  • Other electronic parts

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Transcription-type water-soluble 3D printing resin "RWSI Series"

Transcription-type water-soluble 3D printing resin "RWSI Series"

Dissolves at room temperature and in still water! Can be used in soft robotics and injection molded cores.

We would like to introduce the water-soluble 3D printing resin "RWSI Series" handled by Nagase ChemteX Corporation. It can be dissolved at room temperature and in still water, allowing for the creation of precise and complex structures. The heat resistance is Tg > 100°C. It can be used in life sciences, soft robotics, and injection molding cores. 【Features】 ■ Water-soluble (dissolves at room temperature and in still water) ■ Heat resistance Tg > 100°C ■ Capable of creating precise and complex structures *For more details, please refer to the PDF materials or feel free to contact us.

  • 3D Printer
  • Resin processing machine
  • Contract manufacturing

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Amorphous polyester resin "ALTESTER SH grade"

Amorphous polyester resin "ALTESTER SH grade"

A special grade of ALTESTER suitable for applications requiring heat resistance and impact resistance! Amorphous and highly transparent!

The "ALTESTER SH Grade" is a special grade that has heat resistance and improved impact resistance. The impact resistance is higher compared to existing grades, on par with PET, and it has good chemical resistance as an amorphous polyester. Additionally, it has a Tg of 135°C and a total light transmittance of over 91%. It is a transparent material that demonstrates high heat resistance. 【Features】 ■ Glass transition temperature is 135°C, no deformation in boiling test ■ Amorphous with high transparency ■ Impact resistance is higher compared to existing grades, on par with PET ■ Good chemical resistance as an amorphous polyester ■ Listed in the Ministry of Health, Labour and Welfare positive list *For more details, please refer to the PDF document or feel free to contact us.

  • Other polymer materials

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
New Development Product: Two-Component Heat-Curing Epoxy Resin TE-7814V

New Development Product: Two-Component Heat-Curing Epoxy Resin TE-7814V

High thermal conductivity of 2.5 W/mK and high Tg of 185°C, this is a highly reliable low-viscosity epoxy resin suitable for thermal management of motors and coils.

"TE-7814V" is a two-component, heat-curing epoxy resin suitable for heat dissipation sealing applications in electronic and electrical equipment. Its low viscosity design allows it to accommodate complex component shapes, significantly improving workability and production efficiency. This product has a thermal conductivity of 2.5 W/m·K, making it effective for heat dissipation measures in electronic components that generate heat. It can be widely used in fields that require high performance, such as electronic devices and power modules. 【Features】 - Two-component heat-curing epoxy resin (mixing ratio 100/100) - Suitable for complex component shapes due to low viscosity - High thermal conductivity: 2.5 W/m·K - High heat resistance: high Tg 185℃ - Flame retardant: equivalent to UL94 V-0 - High insulation properties ensure long-term reliability of electronic devices *For details, the product's specification sheet is available for download as a PDF from the link below, or please contact us. *Samples are also available, so please contact us if needed.

  • Other polymer materials

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
SABIC ULTEM resin

SABIC ULTEM resin

Characterized by high heat resistance.

High heat resistance is a characteristic of ULTEM resin. However, there are many features regarding short-term and long-term temperature performance and how it applies to various industries and applications. For a brief tutorial on glass transition temperature (Tg), continuous use temperature (CUT), heat deflection temperature (HDT), and relative thermal index (RTI), please refer to this material. It explains why ULTEM resin can maintain heat resistance while preserving strength and rigidity. For inquiries and material requests, please visit this site: https://sjpn1971.plabase.com/

  • Engineering Plastics

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
High-temperature resistant adhesive 'ZC-210'

High-temperature resistant adhesive 'ZC-210'

High heat-resistant and film-curable adhesive

Attention those struggling with adhesives! =====Amazing Features of ZC-210===== 1. Non-spreading, Thixotropic Ratio = 3 2. Capable of thin film curing, approximately 0.1mm 3. Coating toughness 4. Heat resistance, Tg = 175℃ 5. Quick curing, cures in 10 minutes at 160℃ *For more details, please download the PDF or feel free to contact us.

  • glue

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Introduction of exhibited products at "Chemical Material Japan 2020"

Introduction of exhibited products at "Chemical Material Japan 2020"

Polyimide resin, which is expected to be utilized in various fields including 5G-related applications and aerospace. Product materials are being provided.

Our company will be exhibiting at "Chemical Materials Japan 2020," which will be held online from October 19 to November 18, 2020. 【Exhibited Products Features】 ■ Thermoplastic Polyimide Resin 'Supreme TO65' - Excellent moldability with a Tg of 185°C and a Tm of 323°C - Suitable for various applications such as melt-extruded films, machining, and injection molding ■ Heat-Resistant Transparent Polyester Resin 'ALTESTER Series' - Developed a new grade with a glass transition temperature up to 50°C higher than PET - Currently developing a new grade with crystallinity - Maintains transparency while improving impact resistance ■ Thermosetting Resin 'CYTESTER' - Cures by forming a triazine ring Excellent processability, with high glass transition temperature, low thermal expansion, and low dielectric properties after curing ■ Special Polyol 'SPG (Spiroglycol)' - Symmetrical and stable molecular structure - Incorporating into polymers enhances heat resistance, impact resistance, hardness, and moldability ■ Special Polyol 'DOG (Dioxanediol)' - Can impart flexibility when incorporated into polymers *For more details about each product, please refer to the materials or feel free to contact us.

  • s1.jpg
  • s2.jpg
  • Other polymer materials

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Environmentally friendly materials: Low VOC coating raw material resin

Environmentally friendly materials: Low VOC coating raw material resin

Developed resin materials for coatings in emulsion type and solvent-free type.

【Emulsion Type】 - Hard coat urethane acrylate 【Solvent-free Type】 - A syrup diluted with acrylic monomer of low Tg type acrylic ester-based polymer Since it is a raw material resin, photoradical initiators are not added.

  • paracron.jpg
  • art-resin.jpg
  • Other polymer materials

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
『Therplim』 Low Friction Grade

『Therplim』 Low Friction Grade

For complex shape members and high-performance molded members!

Introducing the crystalline thermoplastic polyimide "Therplim Fiber Reinforced Grade". It is suitable for applications that require high Tg (185℃) as an alternative to super engineering plastics such as PEEK.

  • Other polymer materials

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Resin, plastic materials thermal gravimetric analysis (TGA)

Resin, plastic materials thermal gravimetric analysis (TGA)

The amount of inorganic fillers such as glass fibers, talc, and carbon black can be measured!

In "Thermogravimetric Analysis (TGA)," which is a type of thermal analysis, we measure the weight change of a sample when heated under specific conditions. Simultaneous measurement of Differential Thermal Analysis (DTA) is also possible. This allows us to capture chemical changes accompanied by weight changes such as decomposition, oxidation, and reduction, as well as changes without weight changes such as transitions and crystallization. 【Measurement Conditions】 ■ Temperature Range: Room Temperature to 1300℃ ■ Measurement Atmosphere: Air, N2 ■ Sample Amount: 10mg ■ Corresponding Standards: JIS K7120 (TG/DTA) *For more details, please refer to the related links or feel free to contact us.

  • Contract Analysis

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Search Keywords Related to resin

COPYRIGHT © 2001-2025 IPROS CORPORATION ALL RIGHTS RESERVED.