roller Product List and Ranking from 199 Manufacturers, Suppliers and Companies

Introduction of case studies: [Super Wear-Resistant Urethane Roller Bearings]

TPU urethane bearings with enhanced peel strength, adhesive strength, and abrasion resistance! Adopted by Hitachi, Ltd. for their cart units!

Chemix Industrial Co., Ltd.'s "Urethane Bearing Roller" uses ultra-wear-resistant polyurethane (TPU) that excels in durability, offering superior wear resistance compared to conventional urethane rollers. In comparison tests conducted at Hitachi, while the conventional product delaminated after 10 hours of durability testing, our product did not delaminate even after 24 hours and was adopted as a running and guide roller for the cart unit at Hitachi. 【Features】 ○ Long lifespan ○ Uses ultra-wear-resistant polyurethane (TPU) ○ High wear resistance *For more details, please contact us or download the catalog.

Company：ケミックス工業
Price：Other

Plastic bearings
roller

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Hand cleaner butyl-based conductive rubber rubber adhesive roller

This is an electrostatic prevention model that incorporates a new type of special conductive filler into butyl-based adhesive rubber.

Butyl-based conductive synthetic rubber hand cleaner By incorporating a new type of special conductive filler into a butyl-based adhesive rubber with minimal transfer of rubber components, we reduce the frictional charging that occurs between the roller and the material, and also prevent the charging of the rubber roller itself. By using a specially formulated rubber with an electrical resistance value of 10^5 to 10^9 (surface resistivity), we have minimized peeling charge. Additionally, by changing the handle part to a conductive material, we significantly reduced the charging of the hand cleaner itself. The use of low-dust bearings in the bearing section allows for sufficient pressure to be applied to the workpiece, and the synergistic effect of strong adhesion and the flexibility of the rubber enhances dust removal efficiency.

Company：オーディオテクニカ
Price：10,000 yen-100,000 yen

Other cleaning tools
Other clean room equipment and facilities
Adhesive tape
roller

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Hand cleaner silicone-based mirror finish rubber adhesive roller

Silicone rubber roller with a mirror finish, size 300mm × φ30mm.

Mirror-finished type using silicone rubber. The rubber part is finished to a mirror-like surface, enhancing adhesion to the material and maximizing dust removal capability.

Company：オーディオテクニカ
Price：10,000 yen-100,000 yen

Other cleaning tools
Other clean room equipment and facilities
Adhesive tape
roller

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

[Case Study of Problem Solving] Automobile Parts Manufacturer

Solve the problem of clogging and the issue of uneven joints in composite materials!

The automotive parts manufacturer wants to perform honing processing on a workpiece made of a composite material of ELCH2 and SUS304. However, other honing methods have faced issues such as clogging and the creation of steps at the joints of the composite material. Therefore, we propose the "KIP-50" dual-head automatic machine (2 processes). After implementation, a cycle time of 33 seconds per piece was achieved with good processing accuracy. [Our Proposal] ■ "KIP-50" dual-head automatic machine (2 processes) [Processing length: 25mm, allowance: φ30μm, cylindricity: below 3μm, Rz: below 1.2μm] *For more details, please refer to the PDF document or feel free to contact us.

Company：倉敷機械特殊機械部
Price：Other

Other machine elements
Special Processing Machinery
Processing Contract
roller

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Urethane roller

Integrated production technology from molding to processing! We offer various materials and shapes according to the usage environment.

The "urethane rollers" we handle are products that are widely used in fields requiring precision performance, such as office equipment and currency processing machines. We offer a consistent production system from molding to precision machining in this field, providing high-precision and high-functionality products. Please feel free to consult us when you need assistance. 【Features】 ■Consistent production system ■High precision, high functionality *For more details, please refer to the PDF document or feel free to contact us.

Company：オーツケミカル
Price：Other

Rubber
roller

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

AC Motor Roller Catalog

Adoption of impedance protection type motor! Continuous, intermittent, and forward/reverse operation are possible.

This catalog introduces the "AC Motor Roller." It includes features, common specifications, weight tables, voltage lists, and the minimum roller width that can be manufactured, as well as products suitable for transporting small and lightweight items, such as the "MR-38." Additionally, various specifications such as brakes, waterproofing, drip-proofing, and clean room compatibility are also introduced, making it a useful reference for product selection. 【Contents (excerpt)】 ■ Application examples ■ Motor roller features ■ Common specifications ■ Motor roller weight table and pipe thickness ■ Voltage list and maximum roller width that can be manufactured *For more details, please refer to the PDF document or feel free to contact us.

Company：藤川伝導機
Price：Other

Other motors
roller

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Motor Roller Catalog

Pursuing high performance and economy! A diverse range of products that can be used flexibly.

This catalog introduces the "Weston Roller" from Arai Manufacturing Co., Ltd. It provides detailed explanations of a range of products, including the "Three-Phase AC Standard Type (2RS)," "Single-Phase AC High Torque Type (1・3RP)," and "Three-Phase AC High Torque Type (2RP)." In addition to the features, specifications, and dimensions of each product, it also includes the procedure for selecting models, making it a useful reference for those considering implementation. We encourage you to read it. [Contents (Excerpt)] ■ Procedure for model selection ■ 2RS Type [Three-Phase AC Standard Type] Ø48.6・Ø50.0 ■ 2RS Type [Three-Phase AC Standard Type] Ø57.0・Ø60.5 ■ 2RP Type [Three-Phase AC High Torque Type] Ø57.0・Ø60.5 ■ 1RP/3RP Type [Single-Phase AC High Torque Type] Ø57.0・Ø60.5 *For more details, please refer to the PDF document or feel free to contact us.

Company：藤川伝導機
Price：Other

Other motors
roller
roller

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Sprocket-equipped roller <single unit>

Achieve low-noise and stable chain live transport! Usable for applications such as case transport.

We would like to introduce the "Roller with Sprocket" from Meikikou Co., Ltd. We offer a lineup of sprockets, single types, double types, and eight models of rollers. We have achieved low noise and stable chain live transport. Please feel free to contact us when you need assistance. 【Lineup (Excerpt)】 ■RO-LCF57A-S4010 ■RO-LCF60A-S4010 ■RO-LCF60A-S5008 ■RO-LCF57A-D4010 ■RO-LCF57A-D4011 *For more details, please refer to the PDF document or feel free to contact us.

Company：藤川伝導機
Price：Other

roller
roller

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Rubber Roller "Rubber Mold Bearing"

Next, the rubber roller demonstrates its power for a variety of needs! It is well-suited for feeding mechanisms and applications requiring low vibration and low noise.

The "Rubber Mold Bearing" is a rubber roller that directly bonds polyurethane rubber to the outer diameter of miniature, small-diameter, deep groove ball bearings, incorporating the bearing technology developed by NTN over many years. It uses ether-based polyurethane rubber, which excels in water resistance, wear resistance, cold resistance, heat degradation resistance, ozone resistance, and rubber elasticity. We can manufacture bearings with precision (dimensions, rotation) and sealed grease that differ from standard products according to your specifications. 【Features】 ■ High degree of freedom in bearing specifications ■ Option to select rubber hardness ■ Excellent rubber material ■ Outer diameter runout precision *For more details, please refer to the PDF document or feel free to contact us.

Company：藤川伝導機
Price：Other

Plastic bearings
roller

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Pre-roller

Easily load and unload molds safely with a simple pull-out crane or forklift at the front of the press!

We would like to introduce the "Pre-Roller" that we handle. We offer a lineup of five types of storage methods, including detachable, detachable and vertically foldable, and horizontally foldable. With this product and the rollers of the die lifter installed in the T-slot (U-slot), you can move molds with light force. 【Storage Methods】 ■ Detachable ■ Detachable and vertically foldable ■ Horizontally foldable ■ Detachable (stand-mounted type) ■ Horizontally foldable (stand-mounted type) *For more details, please refer to the PDF document or feel free to contact us.

Company：藤川伝導機
Price：Other

roller
roller

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Free Roller PFR Products Catalogue

Compatible models are φ48.6, φ50, φ57, φ60.5! Introducing specifications for the Micro V pulley, etc.

This catalog includes specifications and dimensional drawings of the free roller "PFR." We introduce standard specifications, V pulley specifications, micro V pulley specifications, sprocket specifications, and round groove specifications along with images. It also contains information on installation methods and free roller model designations. Please feel free to download and take a look. 【Contents (partial)】 ■(A) Standard Specifications ■(B) V Pulley Specifications ■(H) Micro V Pulley Specifications ■(D) Sprocket Specifications ■(G) Round Groove Specifications *For more details, please download the PDF or feel free to contact us.

Company：藤川伝導機
Price：Other

Belts and pulleys
Other motors
roller
roller

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Electromagnetic rail roller

There are permanent magnet types and electromagnetic types, which are used according to the application! Since they attract with magnets, they do not scratch the product or the items being transported.

The "Electromagnetic Rail Roller" is a product installed inside the belt of a conveyor belt for transportation, supporting the transfer and enhancing work efficiency. It is used for vertical and inclined transportation of actual cans, empty cans, and for transporting press scraps and chips in various conveyor belts during the manufacturing process. Additionally, since it is attracted by magnets, it does not scratch the products or transported items. 【Features】 - Installed inside the belt of a conveyor belt for transportation, supporting the transfer - Attracted by magnets, preventing scratches on products or transported items *For more details, please download the PDF or feel free to contact us.

Company：藤川伝導機
Price：Other

roller
roller

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Vibratory roller compaction management system rexse roller rental

GPS-based embankment leveling and compaction management system

Based on the location information obtained from GPS, it provides the operator with real-time data on the number of passes and planar position of the vibratory roller in the construction area, while automatically recording the construction history. This ensures reliable construction management and labor-saving compared to traditional manual methods or pass counters. ***Features*** - By managing the number of passes, it allows for a comprehensive management of the entire embankment surface, leading to improved quality. - The mesh size for management can be changed as needed (the standard specification by the Ministry of Land, Infrastructure, Transport and Tourism is 50 centimeters). The number of compaction passes is determined, and that specified number is executed. Different colors are displayed for each number of passes, allowing for immediate understanding of the compaction status and enabling a swift transition to the next layer of embankment, thus shortening the construction process. - By managing the number of compaction passes, it prevents over- or under-compaction. The operator can understand the number of passes through the color displayed on the onboard computer monitor, which helps prevent over- or under-compaction.

Company：レックス
Price：Other

Other measurement, recording and measuring instruments
roller

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Are you struggling with uneven sheet cooling? High-speed cooling "Multi-Roll Stack"

If you're struggling with uneven cooling of sheets/films or cooling speed, check out the new cooling roller "Multi Roll Stack" that can also accommodate high-speed extruders!

Our German-made multi-roll stack - While line output is often limited by the cooling capacity of the roll stack, it can also accommodate high-speed output. - Superior and consistent sheet quality: - Transparency - Even gloss on both sides - Flatness - Stable sheet quality - Compatible with extruders from other manufacturers ← Please consult us first!

Company：バッテンフェルト・シンシナティ日本支社
Price：Other

Extrusion Machine
roller

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

AC motor roller

By adopting an impedance protection method motor, continuous, intermittent, and forward/reverse operations are possible.

Definition of Impedance Protected Motor Although it is not included in JIS standards, it is summarized from the US UL standard (UL73) as "impedance protected motor." When a motor is in a constrained state for 15 days, the following conditions must be met: ◎ It must not exceed 165°C (when the ambient temperature is 24°C) during the first 72 hours. ◎ The winding must not break or short-circuit to the frame. ◎ Insulation must not deteriorate excessively. The conditions for preventing damage are quite strict. Our company adopts motors that satisfy these stringent conditions as standard motors, ensuring they can be used as is even if there are changes in transport conditions.

Company：協和製作所
Price：Other

Other FA equipment
roller
roller

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Sponge product Cygnus Roller

Due to its characteristics such as soft texture, flexibility, water absorption, cleanability, and low reverse contamination, it is widely used in water absorption processes and precision cleaning.

The Cygnus Roller is a PVA sponge formed in a cylindrical shape. Here’s what makes it different! Iwa Industry's Original - Cygnus Roller - Our sales staff specializing in PVA sponges will select rollers that meet the needs of our customers. 1. Low price and short delivery time We have a large stock of Cygnus Rollers. Even if special processing is required, we can handle it in our in-house dedicated factory. We can respond with short delivery times and low prices. 2. High dimensional accuracy With years of experience, we have achieved extremely high precision processing and measurement technology, including outer diameter dimensions, ensuring customer satisfaction. 3. Shaft processing technology We perform PVC pipe processing for water absorption and the production of high-precision cleaning products. For long shafts that accommodate large LCD glass substrates, we provide high-precision shafts using our unique technology. 4. Adhesion High-performance rollers require careful selection of adhesives. With extensive clinical experience, we select adhesives suited to the application and utilize our experience in adhesion technology to achieve high-strength bonding.

Company：井和工業
Price：Other

Other cleaning tools
roller

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Masada Roller "Urethane Roller Type"

Rollers suitable for moving machinery and heavy objects. Used in conjunction with a claw jack.

The Masada Roller "Urethane Roller Type" is a roller suitable for moving machine tools and heavy objects. Please use it in conjunction with a jack with claws. It features wheels that are highly durable and less likely to scratch the floor surface. There are aluminum frame options available for the 2-ton and 3-ton specifications, which are lighter and lower than the steel frame. For more details, please download the catalog.

Company：マサダ製作所
Price：Other

Other work tools
roller
roller

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

[Processing Example] Guide Roller

Total production from design and manufacturing to construction and service! Introduction of processing examples.

At Nippon Sakas Co., Ltd., the Platech Division conducts a comprehensive operation from the manufacturing of precision plastic parts to adhesion, welding, and assembly. This is a processing example of a "guide roller" made from ultra-high molecular weight polyethylene, machined using an NC lathe. 【Processing Example】 ■Manufacturing Machine: NC Lathe, Yamazaki Mazak Corporation ■Size: 4φ×51 ■Material: Ultra-high molecular weight polyethylene *For more details, please refer to the catalog or feel free to contact us.

Company：日本サカスプラテック事業部
Price：Other

Processing Contract
roller

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Tanimura Clean Room Cleaning Silicone Rubber Roller MK-NBR

Foreign object removal rolling cleaning silicone roller

Removing dust from surfaces such as substrates and films There are two types of adhesive cleaners (roller type) that can be used in clean rooms: adhesive tape roller type and rubber roller type. When the adhesive surface becomes dirty during use, the adhesive tape type peels off the tape, while the rubber roller type rolls the roller on a dedicated adhesive transfer sheet to transfer the adhered dust to the sheet. This product uses a roller that has less transfer of siloxane (silicic acid) than general silicone rubber. Moreover, due to the unique softness of the rubber roller, it removes dust and particles without damaging the target object. *If static prevention or complete silicone-free is required, please use the MK-EC rubber roller.

Company：タニムラ
Price：10,000 yen-100,000 yen

Other clean room equipment and facilities
Hand cleaner
Other cleaning tools
roller

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Flat Carrier Roller FC Type

Roller used for flat carrier idler (JFC type)

This is a roller used in the flat carrier idler (JFC type) that is used to transport "bulk items" through skirt rubber, in addition to "voluminous items" such as beer cases, cement bags, and grain bags.

Company：JRC
Price：Other

Conveyor
roller
Belts and pulleys
roller

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Impact Roller (T-Type) KC-T Type

A roller with a hollow type impact rubber that mitigates the drop impact of transported items.

This is a roller used at the idler in areas where transported items fall, such as hoppers and chutes (impact areas), on a conveyor. The hollow-type impact rubber is bonded to a steel pipe roller, preventing surface peeling and mitigating the impact of the fall.

Company：JRC
Price：Other

Conveyor
roller
Belts and pulleys
roller

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Tapered Carrier Roller AC-T Type

Rollers with different diameters on the left and right used for snake prevention measures.

It is a roller with different diameters on the left and right, used as a side roller for tapered automatic centering carrier idlers (single-axis and dual-axis).

Company：JRC
Price：Other

Conveyor
roller
Belts and pulleys
roller

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Center roller for taper type carrier AC-CT type

Center roller for taper type automatic centering carrier idler.

This is a center roller used for tapered automatic centering carrier idlers (single-axis type) and (dual-axis type).

Company：JRC
Price：Other

Conveyor
roller
Belts and pulleys
roller

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Garland Carrier Roller GC Type

Roller used in Garland Carrier Idler (GC type)

This is a roller used in the Garland Carrier Idler (GC type). There is a hole for the joint link at the shaft end.

Company：JRC
Price：Other

Conveyor
roller
Belts and pulleys
roller

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Garland Carrier Roller (Center/Side) GCC Type, GCT Type

Roller used in Garland Carrier Idler (GC type)

This is a roller used in the Garland Carrier Idler (GC type). There is a hole at the shaft end for a joint link.

Company：JRC
Price：Other

Conveyor
roller
Belts and pulleys
roller

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Rubber-coated carrier roller CNR type, CNBR type

A roller that improves the wear resistance and corrosion resistance of pipes by bonding rubber to the surface.

This is a roller that improves the wear resistance and corrosion resistance of pipes by bonding rubber to the surface of steel pipe rollers. There are NR type (natural rubber wrapped) and NBR type (nitrile rubber wrapped), which has superior oil resistance.

Company：JRC
Price：Other

Conveyor
roller
Belts and pulleys
roller

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Sleeved Return Roller RG Type

A return roller that reduces the dropping of attachments from the belt (falling debris) using multiple rubber rings.

This is a return roller with multiple rubber rings placed on the surface of a steel roller, reducing the contact length with the belt and decreasing the dropping of materials adhering to the belt (material fall-off).

Company：JRC
Price：Other

Conveyor
roller
Belts and pulleys
roller

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Spiral Return Roller SR Type

A roller that scrapes off adhered items while rotating, due to its symmetrical spiral shape.

The roller surface, which has a symmetrical spiral shape, has the function of scraping off the "adhesion" of transported items that cause belt wandering and misalignment while rotating. It is recommended to install it in areas within the conveyor system where you want to promote the flow of bulk materials.

Company：JRC
Price：Other

Conveyor
roller
Belts and pulleys
roller

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

V-type return roller R-V type

Roller used in the VR type return idler (VR type) of a trough-style roller.

This is a roller used in the VR type return idler (VR type) of a trough-type VR system.

Company：JRC
Price：Other

Conveyor
roller
Belts and pulleys
roller

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

roller Product List and Ranking from 199 Manufacturers, Suppliers and Companies | IPROS GMS

roller Manufacturer, Suppliers and Company Rankings

roller Product ranking