rubber seal Product List and Ranking from 31 Manufacturers, Suppliers and Companies

Gasket Packing Q&A No. 5

What is the difference between Teflon cushions with felt and those without felt?

Daiko Co., Ltd. will answer your questions regarding gaskets and packing. Products like T9010-A6 and V7030(S) allow for sealing at low surface pressure by sandwiching a soft felt material in the joint sheet to improve sealing performance. However, when used in areas exposed to rain or condensation, the felt can absorb moisture, making it unsuitable. In such cases, it is better to use joint sheets like T9010-A5 or V7030(N) along with products that only have a Teflon coating.

Company：ダイコー本社
Price：Other

Piping Materials

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Gasket Packing Q&A No. 7

Have regulations been established for ceramic fiber-related products?

Daiko Corporation will answer your questions regarding gaskets and packing. 〇 About RCF (Refractory Ceramic Fiber) Regulations In November 2015, the Specific Chemical Substance Hazard Prevention Regulations were amended and enforced, leading to regulations concerning the handling of RCF. The purpose is to strengthen measures to prevent health hazards for workers related to refractory ceramic fibers. The "Ordinance to Partially Amend the Enforcement Order of the Labor Safety and Health Act" (Ordinance No. 294 of 2015) was promulgated on August 12, 2015, and the "Ministry of Health, Labor and Welfare Ordinance to Partially Amend the Labor Safety and Health Regulations" (Ordinance No. 141 of 2015) was promulgated on September 17, 2015. 〇 Transition to Biodegradable Ceramic Fibers In response to the regulations, we have changed the conventional ceramic fibers to biodegradable ceramic fibers developed to have solubility even when they enter the body. In terms of performance, the only difference is between fibers that dissolve in biological water (RCF-compliant products) and those that do not dissolve (RFC non-compliant products). We guarantee that there are no products that are inferior in performance compared to existing products.

Company：ダイコー本社
Price：Other

Piping Materials

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Gasket Packing Q&A No. 9: Gasket Surface Leakage Edition!

What causes leaks when using gaskets? - Surface leak edition -

There are various factors that can cause leaks when using gaskets, but this time I will explain about interface leaks. ◆ What is an interface leak? It is a phenomenon where internal fluid leaks through the interface between the sealing material and the opposing surface (such as a flange or shaft). ◆ Countermeasures Fill the minute gaps between the sealing material and the opposing surface with clamping force. ◆ Requirements for sealing materials - Compatibility - Resilience (to respond to pressure drop due to vibrations, thermal loads, etc. during operation, and to prevent the occurrence of minute gaps)

Company：ダイコー本社
Price：Other

Piping Materials

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Various oil seals and packing.

Total Advisor for Oil Seals and Packings

Our company manufactures various types of oil seals, packings, rubber, and resin products. In addition to standard oil seals and packings, we also produce large-diameter products using ultra-large presses capable of manufacturing up to an outer diameter of 1600mm, as well as special products such as white oil seals for food machinery and semiconductor manufacturing equipment. Furthermore, our company has obtained ISO9001 certification and is constantly striving to improve quality and technology. Please feel free to contact us if you have any requests. [Business Purpose] ■ Manufacturing and sales of oil seals, O-rings, V-rings, and other industrial rubber products. *For more details, please download the PDF or contact us.

Company：東洋オイルシール製作所
Price：Other

Other machine elements
Contract manufacturing
Processing Contract

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

[Case Study Collection] Factory Products - Punching Processing - Clicker Edition

We are introducing some of the products processed in our factory, along with their molds, uses, and materials.★

The products being introduced all use the Thomson type (a mold created by cutting laser grooves into a base wooden board and fitting blades into those grooves)! This case study collection only includes products processed with a clicker (Thomson die-cutting machine, 20t)! ◆ Features of the Clicker This processing method is suitable for products with a small lot number. ◆ Material Size Punching is possible for outer diameters of approximately 60mm and inner diameters of approximately 40mm. ◆ Materials (Punchable Thickness) Rubber: up to about 5t Sponge: up to about 50-60t Joint sheet: up to about 3t Resin: PTFE up to about 3t PET, POM up to about 0.5t PE-L up to about 2t PE-H up to about 3t *Other various materials can also be processed! Please take a moment to read through it. 【Examples of Cases (Excerpt)】 ■ Gaskets ■ Various parts ■ Protective plates *For more details, please refer to the PDF document or feel free to contact us.

Company：大藤パッキング
Price：Other

Processing Contract

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Find the packing you want - Packing Toyo Riko Catalog

Introduction to our packing lineup including carbon fiber packing, Teflon packing, graphite packing, and special silica fiber packing. [Catalog available]

This is a catalog of packing lineup including carbon fiber packing, Teflon packing, graphite packing, and special silica fiber packing. With approximately 60 years of history and achievements in packing, we propose the packing you desire. 【Partial Contents】 ■ Carbon Fiber Packing A packing that offers cost performance, compatibility with shafts, and ease of handling. It can be used with peace of mind as it does not attack the shaft. ■ Aramid Fiber Packing High-strength aramid fibers are flexible and provide uniform contact with the shaft, demonstrating excellent performance. Each fiber is thoroughly impregnated with heated PTFE, preventing early hardening and seizure of the packing. *For more details, please download the catalog or feel free to contact us.

Company：東洋リコー
Price：Other

plastic

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Rubber packing

Characteristics and applications of rubber gaskets; suitable rubber types.

Rubber gaskets used to enhance airtightness or seal contents. There are various sizes and shapes depending on the application. Additionally, the rubber materials used for the gaskets vary according to the items or scenes in which they are used. It is important to replace them periodically, as their functionality deteriorates when they reach the end of their lifespan. This article will explain the characteristics and applications of rubber gaskets, the features of the rubber materials used in them, and the lifespan and timing for replacement of rubber gaskets. Please use this information to assist in the manufacturing of rubber gaskets suited to your needs, as well as in selecting and using the correct rubber gaskets. For detailed articles, please refer to the related links below.

Company：富士ゴム化成
Price：Other

Rubber

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Quality improvement with APE-cap: Defective foreign matter adhesion due to static electricity.

Reducing foreign matter adhesion by not requiring the use of a firing form!

The current product uses foam to prevent water leakage. This foam has the issue of dust adhesion due to static electricity. The 'APE-cap' eliminates the use of foam while still providing a function to prevent water leakage, thereby addressing hygiene issues that are essential for water servers. 【Overview】 ■ Current Issues - Defective foreign matter adhesion due to static electricity from foam usage ■ Quality Improvement - Reducing foreign matter adhesion by eliminating the need for foam *For more details, please refer to the PDF document or feel free to contact us.

Company：フェイスアップ
Price：Other

plastic

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Bulk processing of packing materials

We handle everything from the punching process of cap gaskets to assembly and inspection!

We would like to introduce our "Bulk Processing of Seals." To all manufacturers considering outsourcing the production of cap seals, we offer comprehensive services for seal manufacturing and assembly. From the labor-intensive integration into caps to product inspection, you can trust us to handle it with care. 【Service Overview】 ■1. Seal Punching ■2. Integration into Caps ■3. Quality Inspection ■4. Delivery Support *For more details, please refer to the PDF document or feel free to contact us.

Company：大石産業
Price：Other

Food and pharmaceutical standard seals and packing products

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Packing punching

The punching process determines the standard dimensions of the packing! Here are some important points to consider.

We would like to introduce our "Packing Punching" process. When manufacturing packing for caps, the punching stage significantly affects the dimensional accuracy of the packing. Additionally, during the punching of packing for caps, secondary processing can also be performed. Please leave the manufacturing of packing for caps to us. 【Key Points of Packing Punching (Partial)】 ■Selection of Packing Material - We listen to the contents to be placed in the container and select the most suitable material. - If there are any other requests, we can suggest alternative materials based on their characteristics. ■Selection of Packing Shape and Size - We set appropriate dimensions according to the material and shape of the cap. - Regarding the shape, we perform punching that matches your requests and the shape of the cap. *For more details, please refer to the PDF document or feel free to contact us.

Company：大石産業
Price：Other

Food and pharmaceutical standard seals and packing products

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

パッキン加工＜キャップへの組み込み＞

組み込みの作業内容と対応範囲などについてご紹介いたします！

当社で行っているパッキン加工の「キャップへの組み込み」についてご紹介いたします。当社ではお客様のご要望に応じた加工工程にて、キャップパッキンの組み込みを承ることが可能。キャップ用パッキンの組み込みの際は、品質に気をつかわなければなりません。当社では品質管理体制は徹底しています。安心してパッキンの組み込みもお任せください。【作業内容】 ■1.対象製品と指示書を確認した後、組み込み作業を開始 ■2.専従者が専用冶具にてパッキンをキャップ内面に装着 ■3.パッキンが正常に装着されているか、パッキンに異物付着の有無を検査 ※詳しくはPDF資料をご覧いただくか、お気軽にお問い合わせ下さい。

Company：大石産業
Price：Other

Food and pharmaceutical standard seals and packing products

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

List of handled packing materials

We will deliver the suitable packing material based on the contents and seal level!

We would like to introduce the packing materials and their grades that we handle. Starting with "high sheet packing" grades such as S, SS, PE, PP, and SSPP, we also offer packing compositions like PE five-fold foam + OPP film and PE five-fold foam, known as "Softron packing" and "Torepefu packing." Additionally, we have "inner seals" available, allowing us to propose various packing options. Please feel free to contact us if you have any requests. 【Product Lineup】 ■ High Sheet Packing ■ Softron Packing / Torepefu Packing ■ Other Packings *For more details, please refer to the PDF materials or feel free to contact us.

Company：大石産業
Price：Other

Food and pharmaceutical standard seals and packing products

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

rubber seal Product List and Ranking from 31 Manufacturers, Suppliers and Companies

rubber seal Manufacturer, Suppliers and Company Rankings

rubber seal Product ranking