We have compiled a list of manufacturers, distributors, product information, reference prices, and rankings for rubber.
ipros is IPROS GMS ・ IPROS One of the largest technical database sites in Japan that collects information on.

rubber×信栄ゴム工業 - List of Manufacturers, Suppliers, Companies and Products

rubber Product List

1～15 item / All 39 items

Displayed results
Production is not keeping up. Alternative production at super speed to avoid assembly line stoppage!

Production is not keeping up. Alternative production at super speed to avoid assembly line stoppage!

Due to a sudden increase in orders, production cannot keep up. Achieving mold transfer in one week and avoiding assembly line stoppage to stabilize the supply chain!

■Specific Concerns "Orders have surged, and production is unable to keep up." "I will send the molds, so I would like you to carry out alternative production to avoid stopping the assembly line..." ■Cause Overcapacity in production due to a large backlog of orders ■Solution After consultation, repair and install the molds within one week, then start mass production. Enhance the production process to improve output before alternative production. ■Effect Achieved double the output compared to before alternative production. Avoided stopping the assembly line and prevented disruption of the supply chain. ■Customer Feedback "They responded urgently and helped us avoid stopping the assembly line. We were able to protect the supply chain." "The backlog of orders has been resolved, which was a great help." *For more details, please download the materials or feel free to contact us.*

  • Rubber
  • Contract manufacturing
  • Processing Contract

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
I want to make the burr less noticeable. Let's come up with ways to manage the burr and improve the yield!

I want to make the burr less noticeable. Let's come up with ways to manage the burr and improve the yield!

I want to make the burrs on the surface of rubber products less noticeable. By devising a way to produce the burrs and improving the structure so that the burrs are not visible, the yield due to burr defects has dramatically improved!

■Concerns "I want the burrs to be less noticeable since it will be used in prominent areas." "When trying to remove the burrs, they become too noticeable, so I would like the product design to be such that the burrs are not visible." ■Cause With the usual product structure, burrs protrude from the side, making it impossible to completely remove them. ■Solution Improved the structure so that the burrs come out directly underneath and are not visible from the surface. ■Effect The burrs are no longer visible. Defects due to remaining burrs have been eliminated, and yield has significantly improved. ■Customer Feedback "After reviewing the product structure multiple times, we now have a product where the burrs are not visible." "The defect rate has dramatically improved, and productivity has greatly increased, which has been very helpful." *For more details, please refer to the PDF document or feel free to contact us.*

  • Rubber
  • Contract manufacturing
  • Processing Contract

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
I want to restore the old mold and turn it back into the original product. Restored with the latest technology!

I want to restore the old mold and turn it back into the original product. Restored with the latest technology!

Due to the aging of the mold, products cannot be produced. Restore the mold through reverse engineering and resume production! We can accommodate even without drawings.

■Specific Concerns "I don't have the drawings, but I want to fix the mold and create the rubber product as it was." ■Solution Restoring the mold from the actual product through reverse engineering. ■Effect Restoring the rubber product based on the actual item. Achieving it at a lower budget than creating a new mold. ■Customer Feedback "I thought it would be difficult, but they restored it properly through reverse engineering, which was a great help." "It was really helpful that they could restore it from the actual product even without drawings." *For more details, please download the materials or feel free to contact us.*

  • Rubber
  • Contract manufacturing
  • Processing Contract

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
I want to stabilize the supply chain. Contributing to procurement stability through mold transfer!

I want to stabilize the supply chain. Contributing to procurement stability through mold transfer!

The procurement environment is unstable. Contributing to the stabilization of the supply chain through the transfer of molds for multiple types of large rubber products! Rubber molding.

■Specific Concerns "The procurement environment has become unstable due to the impact of COVID-19, and we want to stabilize the supply chain." "We want to transfer about 10 types of large products that exceed 1,000 millimeters in size." ■Solution Developed a fixture that can accommodate all types of transferred molds. ■Effect Minimized time and costs associated with mold transfer. Improved quality standards compared to before the transfer. ■Customer Feedback "I was really helped by the quick response within just one month." "The quality standards have improved compared to before the transfer, and there is now more stability in procurement." *For more details, please download the materials or feel free to contact us.*

  • Rubber
  • Contract manufacturing
  • Processing Contract

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
The integrated molding of metal and rubber is not going well. Troubleshooting through jig development!

The integrated molding of metal and rubber is not going well. Troubleshooting through jig development!

Eliminate the frequent defects that occur in the integrated molding of metal and rubber through the development of jigs! Successfully transferred the mold.

■Specific Concerns "I want to transfer the mold for rubber and metal integrated molded products." "I tried several other companies, but the metal protruded, and it didn't go well." ■Solution Conceived and developed a fixture to secure the metal to the rubber. Revised molding conditions to encapsulate the metal within the rubber. ■Effects Significant reduction in material preparation time and improvement in lead time. ■Customer Feedback "The metal fits beautifully within the rubber now." "I tried several companies without success, but I'm glad we were able to successfully launch." *For more details, please download the PDF document or feel free to contact us.*

  • IMG_0089 (003).jpg
  • Rubber
  • Contract manufacturing
  • Processing Contract

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Eliminate adhesion issues with double-sided tape for rubber products. Reduce peeling after installation!

Eliminate adhesion issues with double-sided tape for rubber products. Reduce peeling after installation!

I want to avoid adhesive failure after vehicle installation. Reduce peeling after installation by resolving issues! Rubber molding, rubber materials, double-sided tape, adhesion.

■Specific Concerns "I'm afraid that exterior parts attached with double-sided tape will peel off after installation due to poor adhesion." "I'm not very experienced with applying double-sided tape." ■Solution Developed a tool that can firmly press the double-sided tape onto the product with even pressure. Established a process to ensure that the product and double-sided tape do not come apart. ■Effect Achieved uniform adhesion of the double-sided tape. ■Customer Feedback "With the development of the tool and the standardization of work conditions, it has become a process that I can trust and rely on." *For more details, please download the materials or feel free to contact us.*

  • S__1507368.jpg
  • Rubber
  • Contract manufacturing
  • Processing Contract

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
I want to eliminate irregular lines (weld lines) and remove appearance defects!

I want to eliminate irregular lines (weld lines) and remove appearance defects!

I want to eliminate the irregular lines (weld lines) that appear on rubber products. By reviewing the molding conditions, we can resolve appearance defects and insufficient strength, contributing to improved yield!

■Specific Concerns "I have irregular lines that make the appearance defective." "We're producing a lot of defective products... I want to improve the yield." ■Solution Reviewing molding conditions such as the positioning of rubber materials and the shape of the materials used. ■Effects Elimination of weld lines Improvement in appearance quality Increased productivity in molding and inspection processes due to yield improvement ■Customer Feedback "The appearance has really improved!" "The inspection process has become easier due to the yield improvement." *For more details, please download the catalog or feel free to contact us.*

  • Rubber
  • Contract manufacturing
  • Processing Contract

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
I want to highlight only a part of the rubber product. Improved visibility with integrated molding!

I want to highlight only a part of the rubber product. Improved visibility with integrated molding!

I want to change the color of only a part of the rubber product to enhance the user's visibility. Improve visibility and design with integrated molding!

■Specific Concerns "I want to add a yellow mark to make part of it stand out." "I want it to be shaped so that the mark cannot be removed." ■Solution Improvement of the rubber material embedding method. ■Effect Eliminated rubber covering and mark misalignment, resulting in a lower defect rate. Improved visibility of the yellow mark enhanced usability for end users. Enabled integrated molding of differently colored materials, contributing to the design quality of rubber products. ■Customer Feedback "This mark has increased visibility for end users, making it easier to draw attention." "This integrated molding can be applied to other rubber products too! I want to challenge the development of high-design rubber products." *For more details, please download the materials or feel free to contact us.*

  • Rubber
  • Contract manufacturing
  • Processing Contract

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
In just one week, it's falling apart. Contributing to productivity improvement with the right rubber materials!

In just one week, it's falling apart. Contributing to productivity improvement with the right rubber materials!

Worn out after just one week of use" "Unable to achieve the desired effect" "We contribute to improving productivity by proposing appropriate rubber materials!

■Specific Concerns "After a week, it becomes worn out, rendering the rubber useless." "I don't want electricity to pass through, but it does, resulting in a mountain of defects." ■Solution Investigate the usage environment Switch to materials that can withstand ultra-high concentrations of acidic chemicals while ensuring "electrical insulation." ■Effect Extended lifespan from 1 week to 2 months ■Customer Feedback "Electrical insulation has been secured, and defects have significantly decreased." "The frequency of replacements has also decreased, greatly improving work efficiency." *For more details, please download the catalog or feel free to contact us.*

  • S__4120587.jpg
  • Rubber
  • Contract manufacturing
  • Processing Contract

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
I want you to make only the necessary amount. Reduce inventory risk with small-scale production!

I want you to make only the necessary amount. Reduce inventory risk with small-scale production!

I want you to produce only the necessary amount of rubber products. With a small-scale production system from rubber material to molding, it contributes to reducing inventory risk and enabling agile procurement!

■Specific Concerns "I want to receive only the necessary amount of rubber products, but due to lot issues, I can't." "I purchased a lot, but I have too much inventory..." ■Solution Establish a small-scale production system for rubber materials (from 1kg of rubber materials) Produce only the necessary amount of rubber products in the molding process ■Effects Able to accommodate small orders such as "5 pieces" or "20 pieces" Reduction of inventory risk and storage space ■Customer Feedback "I thought small-scale production of rubber wasn't possible, but I was helped by their support." "I had been pointed out about inventory risk. Thanks to this, my storage space has become tidier and it has led to increased efficiency." *For more details, please download the materials or feel free to contact us.*

  • IMG_0021 (002).jpg
  • Rubber
  • Contract manufacturing
  • Processing Contract

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
For those troubled with rubber products: A must-see for product development, production management, and sales professionals!

For those troubled with rubber products: A must-see for product development, production management, and sales professionals!

Solve your problems with rubber products over 1 meter in size from both hands! Prototype, mass production, and mold transfer support available!

Are you struggling with rubber products over 1 meter in size? Do you have any of these concerns? 【Product Development Personnel】 I want to develop satisfactory rubber products! I want to understand the characteristics of rubber, production technology, and quality issues to develop products, but I can't find anyone to teach me… 【Production Management Personnel】 Facing a procurement crisis due to business closures and labor shortages! I want to transfer molds. I'm considering mold transfer due to concerns about supplier stability, but I can't find anyone to take it on… 【Sales Personnel】 I want to increase our company's capacity! I want to take on new work, but our current production and supply capabilities can't handle it. We will solve all these concerns at once! ■ Comprehensive support from prototyping to mass production launch We provide consistent support from material selection suitable for the application and required standards to prototyping and mass production! ■ Stable supply through mold transfer from other companies We can transfer molds used by other companies as they are! We ensure stable supply while maintaining quality and delivery times! ■ Spot and emergency speed response We will take on your existing molds as they are! We have a track record of launching in as little as one week! *For more details, please download the materials or feel free to contact us.

  • Rubber
  • Contract manufacturing
  • Processing Contract

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
[Production Example] Colored Items

[Production Example] Colored Items

<Automotive and Materials Industry> Press sizes from 70t to 1000t! Examples of colored product manufacturing.

We would like to introduce examples of colored products handled by Shin-Ei Rubber Industry Co., Ltd. The industry is automotive and materials, and the materials used are SBR/NR, manufactured with press sizes ranging from 70t to 1000t. Our company has been involved in the manufacturing of rubber products used in automobiles for a long time. Please feel free to consult us when you have any requests. 【Case Overview】 ■Industry: Automotive and materials ■Material: SBR/NR ■Press Size: 70t to 1000t *For more details, please refer to the PDF materials or feel free to contact us.

  • Other contract services

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
I want to change the strength depending on the location. By reviewing the material composition, we can achieve the ideal strength!

I want to change the strength depending on the location. By reviewing the material composition, we can achieve the ideal strength!

I want to change the strength of a rubber product depending on the location. I will review the material formulation design, adjust the color, meet the required strength, and improve the usability and durability!

■Specific Concerns "I'm having trouble because only the middle part of the product is wearing out excessively." "I want to increase the strength of just the middle part, but the color of the rubber inevitably changes." ■Cause Due to differences in strength, it is difficult to adjust the formulation to match the same black color even if it is black. ■Solution Adjust the formulation to meet the ideal strength while keeping the color unchanged. ■Effect Achieves high strength only in the middle part. Improves usability and durability without color change. *For more details, please refer to the PDF document or feel free to contact us.*

  • Rubber mold
  • Contract manufacturing
  • Processing Contract

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
I want to extend the lifespan of rubber products. By painting rubber products, we can achieve long durability!

I want to extend the lifespan of rubber products. By painting rubber products, we can achieve long durability!

I want to extend the lifespan of rubber products. By painting rubber products, we can prevent color changes and deterioration! Achieve a longer lifespan and eliminate the need for replacement!

■Specific Concerns "Even with highly weather-resistant rubber materials, they still deteriorate. Is there a better method?" "I want to extend the lifespan of rubber products as much as possible so that customers can use them longer." ■Causes Rubber deteriorates when exposed to the atmosphere. ■Solution Coating rubber products ■Effects Eliminated color changes due to atmospheric effects Deterioration has ceased, and replacement is no longer necessary ■Customer Feedback "I didn't know that rubber could be coated." "Not only has the lifespan increased, but the appearance has also become shiny and beautiful." *For more details, please refer to the PDF document or feel free to contact us.*

  • Rubber mold
  • Contract manufacturing
  • Processing Contract

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Unable to produce overseas. Transfer of molds from abroad to avoid shortages!

Unable to produce overseas. Transfer of molds from abroad to avoid shortages!

Unable to manufacture rubber products overseas. Solved by mold transfer! Comprehensive support from formulation design to mold cleaning and molding.

■Specific Concerns "I want to produce rubber products that can no longer be manufactured overseas." "I have the mold, but it's rusty, and I don't know the material composition or properties." ■Solutions Passed property tests based on inferred required properties. Polished and cleaned the mold. ■Effects Avoided stockouts. ■Customer Feedback "I was really helped by their support despite the limited information." "The rust on the mold was thoroughly removed, and the products are very clean." *For more details, please refer to the PDF document or feel free to contact us.*

  • Rubber
  • Contract manufacturing
  • Processing Contract

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Search Keywords Related to rubber

COPYRIGHT © 2001-2025 IPROS CORPORATION ALL RIGHTS RESERVED.