We have compiled a list of manufacturers, distributors, product information, reference prices, and rankings for soft.
ipros is IPROS GMS ・ IPROS One of the largest technical database sites in Japan that collects information on.

soft(cam) - List of Manufacturers, Suppliers, Companies and Products | IPROS GMS

Last Updated： Aggregation Period:May 06, 2026～Jun 02, 2026
This ranking is based on the number of page views on our site.

soft Product List

511～540 item / All 724 items

Displayed results
"SimLipid" lipid structure analysis software

"SimLipid" lipid structure analysis software

Software tool for lipidomics using mass spectrometry data of lipids.

High-throughput identification and quantification of lipid species can be performed from MS data such as LC-, MALDI-, ESI-, precursor ion scans, and neutral loss scans. We support all data types from major mass spectrometry manufacturers, including Triple Quad, qTOF, TOF, QqTOF, ion mobility, and ITMS systems, aiming to provide a complete solution for discovery lipidomics and targeted lipidomics research.

  • Separation device
  • Analytical Equipment and Devices
  • Other environmental analysis equipment
  • soft

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Antenna analysis and EMC measures are performed using electromagnetic field analysis software CST Studio.

Antenna analysis and EMC measures are performed using electromagnetic field analysis software CST Studio.

Leave antenna design and analysis solutions, as well as EMC countermeasures, to the world-class electromagnetic field simulator CST Studio Suite!

For those struggling with reducing development costs and lead times in electromechanical design. Would you consider using electromagnetic field simulation to improve efficiency and reduce costs? CST Studio Suite is a high-performance 3D electromagnetic (EM) analysis software package that performs design, analysis, and optimization of components and systems considering electromagnetic fields. It is widely adopted in various fields such as electrical engineering, automotive, and industrial machinery for product development and research, and it is a world-class simulation software that addresses all electromagnetic field issues, from antennas and wireless communication to EMC noise countermeasures. 【Features】 1. A rich lineup of analysis methods from electrostatics to high frequency 2. Excellent operability and a user-friendly interface 3. Comprehensive CAD interface 4. Extensive usage records by companies and research institutions worldwide 5. Support for advanced analysis technologies 6. Advanced technologies enabling fast and large-scale analysis 7. Complete post-processing capabilities For more details, please refer to the related links below.

  • Magnetic field analysis/electromagnetic wave analysis
  • soft

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Easy virtual fitting "Virtual Fashion"

Easy virtual fitting "Virtual Fashion"

Wave your hand for a style change! You can recreate the realistic movement and sway of clothing.

"Virtual Fashion" is an interactive signage content that allows users to experience trying on clothes using digital signage. By displaying the user's body through a camera and fitting the clothing images to the user, it enables a virtual fitting/fashion experience as if they were actually wearing the clothes, all in a contactless and non-face-to-face manner. Additionally, since only images of the clothing need to be provided, it significantly reduces both the initial setup costs and operational costs. ■ Features - AI detects human movements - Clothing can be incorporated simply by using images - Reduces setup and operational costs - Reproduces realistic movements and sways of the clothing - Can also be used for traditional Japanese attire and characters ■ Other Features - Reduces fitting time and the number of fittings - Highly engaging and attention-grabbing - Easy management and smooth operation - Hygienic due to being contactless and non-face-to-face - Simple operation, suitable for all ages and nationalities

  • Virtual Reality Related
  • soft

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Simulation tire model "FTire"

Simulation tire model "FTire"

Reflecting more realistic tire behavior in model-based development!

This is a three-dimensional tire model that enables simulation evaluations of durability and ride comfort using a high-frequency short-wavelength nonlinear tire model by calculating the number of contacts between the road surface and the tire at 200 points. In recent years, there has been an increasing demand for driving simulators where the feeling, such as ride comfort, is important, and it also supports real-time applications. Case 1: Riding over a curb... Due to the 200-point multi-contact, it is possible to obtain results similar to actual behavior. Case 2: Vibration on uneven surfaces... It is possible to verify ride comfort considering the deformation of the tire rubber. Case 3: Low-speed steering behavior... It is possible to reproduce tire behavior at low speeds. Evaluation licenses are also available, so if you are interested, please contact us at the link below. https://www.neorium.co.jp/contact-us/

  • simulator
  • soft

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Case study of solving issues with NC machining: Dramatic reduction in training costs for new employees.

Case study of solving issues with NC machining: Dramatic reduction in training costs for new employees.

Shortening the training period that took several months! A successful case of new employees becoming immediately effective through NC machining.

To master the operation of CAD/CAM software, specialized knowledge and long-term training are required. This high educational cost has become a significant obstacle to new hiring, especially in the manufacturing industry, where there is a severe shortage of personnel. Our core Zeros software for NC machining is specialized in "inputting the information necessary for processing," eliminating the need to learn the complex modeling and tool path creation that traditional CAD/CAM systems required. As a result, the training period for new employees can be dramatically shortened, allowing them to handle data creation and modification tasks on-site within a few weeks. This frees companies from the burden of expensive CAD/CAM educational investments and significantly reduces training costs. *We provide materials that introduce specific operational methods that can be used immediately on-site, shortening the training period.*

  • Other processing machines
  • soft

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
3D design for architectural design, landscape architecture, and urban planning using 'Vectorworks'

3D design for architectural design, landscape architecture, and urban planning using 'Vectorworks'

2D/3D CAD software used in architectural design, interior design, landscaping, stage lighting, etc.!

Vectorworks is a CAD software equipped with 2D drawing, 3D modeling, and high-quality rendering capabilities. It can be used for creating drawings, 3D models, rendering perspectives, and presentation boards. There are packages based on a general-purpose package with basic functions, equipped with features for architecture/interior design, landscape civil engineering, and stage lighting. There are two types of licenses: a standalone version that can be used on a single computer and a network version that can be shared among computers connected to a server. [Notice] The perpetual license version of the Vectorworks series will end manufacturer shipments in December 2024. Starting in January 2025, it will be changed to a subscription license.

  • 2D CAD Construction
  • 3D CAD
  • Other CAD related software
  • soft

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
No need for model prototypes! 3D visualization of drawing data 'AVR' [Free evaluation version available]

No need for model prototypes! 3D visualization of drawing data 'AVR' [Free evaluation version available]

Automatically converts 3D CAD/CAM drawings to VR, allowing for three-dimensional verification. We are distributing a trial version that allows you to use all features for free for 30 days!

The OpenGL capture software "AVR" automatically converts 3D CAD/CAM drawings into VR, allowing for three-dimensional verification. It captures the software's CG in real-time, making it possible to check CAD/CAM data in three dimensions. Even if your software does not support stereoscopic or VR, you can display it on VR devices using AVR, so please experience it at least once. We are currently distributing a trial version that allows you to use all features for free for 30 days. If you are interested, please feel free to contact us. 【Features】 ■ Cost reduction possible ■ No need for mock-up creation ■ Operation via VR devices ■ Numerous operational achievements * For more details, please refer to the PDF materials or feel free to contact us.

  • Other CAD related software
  • Software (middle, driver, security, etc.)
  • Virtual Reality Related
  • soft

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Sheet metal and cutting CAD/CAM nesting software "SigmaNEST"

Sheet metal and cutting CAD/CAM nesting software "SigmaNEST"

Over 10,000 companies have achieved an 80% reduction in material costs! We have reduced errors and data loss during loading and conversion, resulting in shorter cutting lead times!

"SigmaNest" is a CAD/CAM nesting software that supports various machine manufacturers and cutting types. It fundamentally improves material costs and lead times without depending on the environment of machines, personnel, or manufacturing lines, and can be integrated with production management. It is widely used in manufacturing and construction industries, including heavy machinery, agricultural machinery, aircraft, and transportation equipment. 【Features】 ◆ Approximately 80% reduction in material costs ◆ Case studies of implementation examples available ◆ Demo tests are also possible *For more details, please contact us or download the PDF to view.

  • Other CAM related software
  • Other CAD related software
  • Other embedded systems (software and hardware)
  • soft

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
ProSim Plus

ProSim Plus

General-purpose steady-state process simulation and optimization software

ProSim Plus is a product of the French company Fives ProSim and is a general-purpose steady-state process simulator that includes optimization features. In addition to a rigorous thermodynamic model (also sold as a separate product called Simulis Thermodynamics), it is equipped with precise models of chemical engineering unit operations such as heat exchangers, reactors, distillation columns, absorption columns, and extraction columns, allowing for the modeling and simulation of large manufacturing processes, including complex recycling. Designed with the concept of Open Software, it enables users to add custom unit models and modify or extend standard models using Visual Basic. It complies with Cape-Open standards and allows for the integration of models from compatible external software for simulation.

  • simulator
  • soft

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Physical modeling tool "Dymola"

Physical modeling tool "Dymola"

Modeling and simulation of analysis targets that combine mechanics, electrical circuits, etc.!

◆◇◆ Joint exhibition confirmed at the "Automotive Technology Exhibition 2015"! (May 20 - May 22) ◆◇◆ 'Dymola' is a physical modeling tool that supports the "Modelica language," which can describe all physical phenomena based on equations. Models can be created simply by combining component icons from the library. You can model and simulate with the feeling of creating a model on your desk. 【Added optional libraries】 ■ Engine Dynamics Library ■ Liquid Cooling Library ■ Hydro Power Library ■ Electric Power Library ■ Thermal Power Library ■ Heat Exchanger Library ■ Vapor Cycle Library ■ Fuel Cell Library ■ Flight Dynamics Library *For more details, please download the catalog or contact us.

  • Other FA equipment
  • Other industrial robots
  • Drive system parts
  • soft

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Simulator "SIMulation Workbench"

Simulator "SIMulation Workbench"

It is composed mainly of a very high-speed memory-resident database (RTDB)!

"SIMulation Workbench" is a simulator that provides a comprehensive framework for the development and execution of real-time Hardware-in-the-Loop Simulation (HILS) and Man-in-the-Loop Simulation (Driving Simulator). It is equipped with performance that satisfies hard real-time systems and supports industry-standard modeling environments. It can reliably execute simulations of multiple models (Co-Simulation) and also supports multi-rate and multi-core configurations. 【Features】 ■ Supports a wide range of industry-standard modeling tools ■ Environmental simulation software such as PreScan ■ Simultaneous execution of models such as Simulink, SIMPACK, ADAMS, FMU, and hand-coded models ■ Multi-rate, multi-model, and multi-core simulation ■ Complete GUI control of all runtime activities *For more details, please download the PDF or feel free to contact us.

  • スクリーンショット 2026-02-18 171606.png
  • スクリーンショット 2026-02-18 171623.png
  • スクリーンショット 2026-02-18 171643.png
  • スクリーンショット 2026-02-18 171707 (2).png
  • スクリーンショット 2026-02-18 171756.png
  • simulator
  • soft

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Deep Learning Facial Recognition "IP Stier GF1"

Deep Learning Facial Recognition "IP Stier GF1"

Embedded high-speed facial recognition IP Stier EF1, while maintaining high API compatibility, has enhanced the accuracy of facial recognition software [evaluation version available for free].

The "IP Stier GF1" is an AI facial recognition software that utilizes deep learning technology, and it is the third installment in our in-house brand software product "VINIE," focusing on "visualization." It can widely accommodate various customer usage environments (such as hardware, memory size, OS, etc.) and the required product specifications (such as operating speed and accuracy). You can choose suitable facial recognition software from "IP Stier EF1" and this product. Additionally, since we have enhanced compatibility with "IP Stier EF1" and the API (Application Programming Interface), program migration can be carried out smoothly. 【Features】 ■ Wide compatibility with usage environments and required product specifications ■ A demo and evaluation tool that operates on Windows 10 PCs is available ■ It is also possible to compare and evaluate with "IP Stier EF1" using the above tool *For more details, please refer to the PDF document or feel free to contact us.

  • Other security and surveillance systems
  • Image Processing Software
  • Personal authentication
  • soft

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
『OVITO』

『OVITO』

OVITO: Scientific Visualization and Analysis Software for Particle Simulation

"OVITO" is a scientific visualization software for researchers that rapidly visualizes and analyzes particle and atomic scale simulation data to extract insights. ■ Non-destructive processing allows for the application of modifiers to data using a pipeline workflow. ■ Atomic structure classification and grain boundary segmentation using PTM/CNA can distinguish crystal orientations and phases. ■ Dislocation lines can be automatically extracted and visualized using DXA (Dislocation Analysis). ■ Geometric and topological properties can be quantified through Voronoi analysis and surface/vacancy detection. ■ Deformation and diffusion behavior can be evaluated by calculating displacement vectors and local strain tensors. *For more details, please refer to the related links or feel free to contact us.

  • Company：B7
  • Price：Other
  • Software (middle, driver, security, etc.)
  • soft

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
G-code NC program simulation 'NC2Check'

G-code NC program simulation 'NC2Check'

We will conduct simulations to detect interference and collisions based on G-code. By verifying movements similar to those of actual machines, we can prevent accidents before they occur. *Demonstrations available.

"NC2Check" is a simulation that protects CNC machine tools from damage caused by interference and collisions during G-code NC program simulation. [Features] ■ Reproduces G-code NC programs It fully expresses machine-specific movements that could not be represented with CL data. Since the simulation is performed using G-code that actually moves the machine, accurate verification can be conducted. ■ Detects interference and collisions with jigs and clamps In addition to detecting collisions between the workpiece and tools, it also verifies all structures within the machine, detecting collisions with jigs and clamps. ■ High-fidelity machine simulation It allows for mapping the entire interior of the machine tool. It supports a variety of manufacturers' machine tools, enabling you to build a verification environment suited to your own equipment. *For more details, please request a catalog or view the PDF data from the download button above.

  • 3D CAM
  • simulator
  • Other CAM related software
  • soft

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Example: Press Processing - Optimization of Press Processing Conditions

Example: Press Processing - Optimization of Press Processing Conditions

Optimize the press processing conditions to improve wrinkle height and strain.

Press processing is a method used in the manufacturing of various industrial products, including automobiles. Since this press processing is often used for mass-produced products, it is desirable to thoroughly examine the processing conditions in advance using CAE. In this case, we optimized the processing conditions by linking the general parameter optimization software "AMDESS" with the explicit dynamic analysis software "Abaqus/Explicit Student Edition" (from SIMULIA, USA). We added recommended points based on the density of the data points we had previously investigated! We devised a way to avoid falling into local solutions. As a result, we achieved a maximum equivalent plastic strain reduction of 9% while satisfying all constraints. [Analysis Model] ■Blank - Number of nodes: 505 - Number of elements: 400 - Young's modulus: 2.1×10^11 [Pa] - Poisson's ratio: 0.3 *For more details, please refer to the PDF document or feel free to contact us.

  • Other analyses
  • soft

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Analysis software "Moncon Communicator"

Analysis software "Moncon Communicator"

Self-diagnostic program, detection of dynamic maintenance intervals, and more! Equipped with advanced features!

The "Moncon Communicator" is a device control and communication module with real-time signal conversion capabilities for the 3000 series rheometers. It is fully customizable due to various options available. It has a built-in calibration function, allowing for easy calibration of testing equipment such as the MDR3000 and V-MV3000 while checking graphics. 【Features】 ■ Real-time signal conversion capabilities for the 3000 series rheometers ■ Fully customizable due to various options available ■ Built-in calibration function ■ Easy calibration of testing equipment such as the MDR3000 and V-MV3000 while checking graphics *For more details, please refer to the related links or feel free to contact us.

  • commu01.jpg
  • commu02.jpg
  • Software (middle, driver, security, etc.)
  • soft

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Application software "Shutterless Viewer"

Application software "Shutterless Viewer"

Real-time image display and saving is possible! It can also be used as a viewer.

We offer the "Shutterless Viewer" as an application that can display and save images from the camera. This software allows you to display and save images in real-time when the camera is connected. If you start it in local mode without connecting the camera, it can also be used as a viewer to display saved RAW data. In addition to the standard software, we can customize additional necessary features, so please feel free to consult us. 【Main Features (Excerpt)】 ■ Dynamics mode settings (dynamic range/offset settings/auto offset) ■ Color bar display (color table switching, upper and lower temperature settings) ■ Digital zoom function (×1, ×2, ×4, ×8) ■ Temperature monitoring function (maximum/minimum/average aggregated over 8 areas) ■ Temperature judgment function (alarm output) *For more details, please refer to the PDF document or feel free to contact us.

  • Surveillance Cameras
  • Other measurement, recording and measuring instruments
  • Software (middle, driver, security, etc.)
  • soft

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Create townscapes in a short time! Urban landscape modeling 'CityEngine'

Create townscapes in a short time! Urban landscape modeling 'CityEngine'

The fields of activity span a wide range, including film, TV commercials, architecture, and urban planning.

"CityEngine" is a highly efficient urban landscape modeling software that allows for the rapid creation of large-scale cityscapes through procedural methods. By using a syntax called CGA Shape Grammar (rule files), it establishes certain rules for the model's shape and types of mapping, connecting these rules in a node-based manner to create models. It is possible to create a wide variety of models, ranging from dozens to hundreds and beyond, over a large area in a short amount of time all at once. 【Features】 ■ Support for GIS data & "Get Map Data" ■ Dynamic layout *For more details, please refer to the related links or feel free to contact us.

  • Image Processing Software
  • soft

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
[AI Image Inspection Case] Inspection of the Root Shape of Green Onions

[AI Image Inspection Case] Inspection of the Root Shape of Green Onions

We will inspect the shape of the root of the green onion using AI image inspection software! It is also possible to identify defects in agricultural products and classify their shapes and grades!

Currently, cases that are verified with DeepSky were previously verified with EasyInspector before the release of DeepSky. This verification involves inspecting the shape of the base of green onions. It includes sorting those with a bulbous, rounded base and many roots. The customer has specific requirements for the camera and resolution. 【Inspection Settings and Results】 We are inspecting the shape of the base of green onions using EasyInspector's "Dimension and Angle Inspection" function and "Damage Inspection" function. We propose various measurement methods across 14 different items. The inspection content is something that our software DeepSky, released in 2020, excels at. Our company aims to solve customer issues as cost-effectively as possible by utilizing the equipment they currently have, such as cameras.

  • Image Processing Software
  • soft

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Imaging camera and measurement software

Imaging camera and measurement software

We have a wide variety of products, including monitor-integrated cameras and cameras with simple measurement functions!

At R Optical Industry, which designs, manufactures, and sells optical products, we handle "imaging cameras and measurement software." We offer a variety of products, including intelligence-type autofocus cameras that do not require a PC, monitor-integrated cameras, and cameras with simple measurement functions. Although not listed on our website, we can provide recommendations for board cameras, CoaXpress, cameraLink, and more based on your needs. 【Product Lineup】 ■ROC-OPC0004M-C - Direct HDMI connection to monitor, autofocus, SD storage ■1MG-UC0001N - Simple measurement function, video storage function ■9024LCD200-C - Direct display on monitor with lens connection *For more details, please refer to the PDF materials or feel free to contact us.

  • Color camera
  • Other measurement, recording and measuring instruments
  • others
  • soft

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Debut Video Capture Software Pro Version

Debut Video Capture Software Pro Version

Recording of the robin is also possible! You can change the resolution, size, and frame rate of the captured video.

The "Debut Video Capture Software Pro Version" is a software that allows you to record videos captured using various recording devices such as webcams and video cameras, as well as any videos that can be played on a computer. You can choose the recording area from the entire screen, a specific screen, or just a selected portion, and you can select between two types of recording: video only or simultaneous recording of video and audio. You can take snapshots of the video and save your favorite scenes as photos. 【Features】 ■ Can record any video that is played on a computer ■ Choose from various recording methods ■ Ability to select the recording area ■ Choose between video only recording and simultaneous recording of video and audio ■ Frame-by-frame recording is also possible *For more details, please refer to the related links or feel free to contact us.

  • Company：B7
  • Price：Other
  • Software (middle, driver, security, etc.)
  • soft

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
『Passware』

『Passware』

It is a practical integrated solution that supports everything from password recovery to encryption analysis, and device/disk decryption with Passware.

"Passware" is a solution that handles password recovery, decryption, encryption detection, distributed processing, and forensic analysis for files, Windows, encrypted disks, and mobile devices, all within a single product suite. 【Main Products】 ■ Supports 80 to over 390 file types depending on the edition. ■ Supports password recovery for MS Office documents. ■ Supports password recovery for PDF, ZIP, RAR, and more. ■ Supports QuickBooks, FileMaker, and password managers. ■ Supports Windows password reset. *For more details, please refer to the PDF document or feel free to contact us.

  • Company：B7
  • Price：Other
  • Other security
  • soft

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Simulation software 'gPROMS Process'

Simulation software 'gPROMS Process'

For process development, optimal plant design, and operational optimization studies! Simulators for the oil, gas, and chemical industries.

In plant design, equipment sizing, process consideration, and operational optimization, PSE believes that existing process simulators still have room for improvement in terms of convergence for obtaining numerical solutions, constraints of processes they can handle, and customization of process models (model extensibility). The process simulation software developed to meet the needs for more advanced and value-added process plant design and optimization is 'gPROMS Process'. 【Features】 * Libraries for specific applications * Creation of flow sheets using Drag & Drop * High-precision custom model creation and editing functions using gPROMS language * Changes in settings within the same environment from steady-state simulation models to dynamic simulation models * Powerful optimization solution search and analysis functions * Global System Analysis (GSA) * High-Performance Computing (HPC) ★ You can view two "case study materials" available for download. These include examples of achieving high-value product offerings and cost reduction through batch process optimization, as well as successful cases of cost reduction through the optimization of entire plants.

  • simulator
  • soft

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
[Case Study of Thermal Fluid Analysis Software] Thermal Design of Electric Vehicles

[Case Study of Thermal Fluid Analysis Software] Thermal Design of Electric Vehicles

Optimizing thermal performance in EV design! Introducing a case where we were able to identify the main thermal issues in the design.

This is a successful case study of the thermal fluid analysis software 'Celsius EC Solver' for accurately and quickly analyzing the thermal performance of electronic devices. In Europe, there is an engineering competition called Formula Student, where student teams from engineering departments design, manufacture, validate, and race small-scale formula-style racing cars. Team Bath Racing Electric from the University of Bath in the UK needed to lower the battery temperature to meet the regulations while progressing with the design of their electric vehicle (EV) category in the competition. To achieve this, they adopted the electronic thermal fluid analysis software 'Cadence Celsius EC Solver,' which can analyze the thermal performance of electronic systems with high precision and speed. This allowed them to identify issues with the existing design and manufacture the EV based on new design proposals. [Case Overview] ■ Application Scope: Electronic devices for automobiles ■ Software Used: Cadence Celsius EC Solver ■ Benefits: Analysis speed, high precision, efficient design *For more details, please refer to the PDF document or feel free to contact us.

  • image_123.png
  • image_125.png
  • Software (middle, driver, security, etc.)
  • soft

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
3D General-purpose Thermal Fluid Analysis Software

3D General-purpose Thermal Fluid Analysis Software

A thermal fluid analysis software that anyone can use! Implementation is possible at a cost of several hundred thousand yen!

● The thermal fluid analysis software "PHOENICS" is equipped with pre-processing, post-processing, and solver programs as standard (※). (※) Basic flow of PHOENICS: Setting analysis conditions ⇒ Modeling ⇒ Running analysis ⇒ Processing results ● It is capable of pre-processing tasks such as shape definition, data import from CAD, mesh creation, and setting analysis conditions, as well as post-processing tasks like displaying results such as temperature distribution maps, pressure contours, and velocity vectors after analysis. ● PHOENICS incorporates initial values, physical property values, boundary conditions, and many other functions, allowing users to customize PHOENICS and create their own dedicated calculation modules. ● Therefore, it is a versatile thermal fluid analysis software designed with ease of use in mind for both beginners and advanced users, making it accessible to a wide range of users. ● With PHOENICS, it is possible to implement it for several hundred thousand yen. For more information on other features and characteristics, please contact us.

  • Thermo-fluid analysis
  • Other analyses
  • soft

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
RCM Analysis Support Software AvailabilityWorkbench

RCM Analysis Support Software AvailabilityWorkbench

RCM, RAMS analysis support software

The Availability Workbench is software designed to support the implementation of RCM (Reliability-Centered Maintenance) and RAMS analysis (Reliability, Availability, Maintainability, and Safety analysis). The Availability Workbench focuses on the failures of components (system systems) that make up plants and systems, using reliability engineering methods to assist with the following: - Quantitative evaluation of the availability of plants and systems - Development of maintenance plans aimed at eliminating causes of failure - Evaluation of the effectiveness of condition monitoring - Spare parts and workforce planning - Assessment of the lifecycle costs of plants and systems By using the Availability Workbench, it becomes possible to conduct Failure Mode, Effects, and Criticality Analysis (FMECA) and to predict reliability, availability, and lifecycle costs (LCC) with constraints on spare parts and other resources.

  • simulator
  • Other analyses
  • ISO-related consultant
  • soft

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Comprehensive Catalog: System Products

Comprehensive Catalog: System Products

A wide variety of unique and excellent system products handled by our company!

This catalog is a comprehensive introduction to the system products handled by Jupiter Technology Co., Ltd., which provides products that contribute to advanced security and business integrity. It features products such as the log server 'syslog-ng Store Box (SSB)', which achieves ultra-high-speed processing of up to 70,000 msg/s and is suitable for log management in enterprises and organizations where confidentiality and integrity are essential, as well as 'Safeguard for Privileged Sessions', which records all remote access operations in video format and is effective for security measures. [Featured Products] ■ Log Servers - syslog-ng Store Box (SSB) - WinSyslog - Kiwi Syslog Server, etc. *For more details, please download the PDF or contact us.

  • server
  • soft

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
AI Meter Automatic Monitoring System "Equipment Monitoring Cloud"

AI Meter Automatic Monitoring System "Equipment Monitoring Cloud"

Zero installation cost! A cloud system that can be started immediately by just placing a camera! It monitors facilities such as power substations and dams in place of people.

The "Equipment Monitoring Cloud" is a system that allows for the monitoring of facilities such as substations and dams in mountainous areas using mobile networks and network cameras. Regular meter readings and lamp checks are conducted, and immediate notifications are sent in case of abnormalities. By eliminating the need for travel for inspections, costs are reduced, and frequent automated checks enable quick responses to any issues that arise. 【Mechanism of the Equipment Monitoring Cloud】 Image processing for the Equipment Monitoring Cloud is performed in the cloud, eliminating the need for image processing systems like PCs. It can be implemented with just one camera. You can start using it simply by placing the camera and connecting it to the internet. There is no need for network settings such as VPN/port forwarding, so there are no hassles during the setup process. 【Features】 ■ No installation costs ■ Start immediately by just placing the camera ■ Automatic monitoring of facilities in mountainous and remote areas *For more details, please refer to the related links or feel free to contact us.

  • EMCL_image1.png
  • EMCL_image2.png
  • 設備監視構成図.png
  • b1.jpg
  • b3.jpg
  • emcam3.jpg
  • Other security and surveillance systems
  • soft

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
DataHub v10 New Features

DataHub v10 New Features

Supports historical data! Data can now be written to major time series historical databases.

We would like to introduce the new features of 'DataHub v10' that we handle. It is now possible to write data to major time-series historical databases such as InfluxData, Amazon, and AVEVA. Additionally, the functionality to create alarm notifications via email, SMS, social media, and OPC A&E has been enhanced based on changes to DataHub points. 【New Features】 ■ External Historians ■ Tunneling Historical Data ■ Store & Forward for Cloud Connectivity ■ Alarms and Notifications ■ Importing Settings ■ Enhanced WebView Functionality *For more details, please refer to the PDF document or feel free to contact us.

  • Software (middle, driver, security, etc.)
  • Other network tools
  • Document and Data Management
  • soft

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Search Keywords Related to soft

COPYRIGHT © 2001-2026 IPROS CORPORATION ALL RIGHTS RESERVED.