Abrasion Testing Machineのメーカーや取扱い企業、製品情報、参考価格、ランキングをまとめています。
イプロスは、 製造業 ・ BtoB における情報を集めた国内最大級の技術データベースサイトです。

Abrasion Testing Machine - メーカー・企業32社の業務用製品ランキング | イプロスものづくり

更新日： 集計期間:Apr 15, 2026～May 12, 2026
※当サイトの各ページの閲覧回数を元に算出したランキングです。

Abrasion Testing Machineのメーカー・企業ランキング

更新日： 集計期間:Apr 15, 2026～May 12, 2026
※当サイトの各ページの閲覧回数を元に算出したランキングです。

  1. 井谷衡機製作所 Tokyo//Testing, Analysis and Measurement
  2. 東洋精機製作所 Tokyo//Testing, Analysis and Measurement
  3. 新東科学 本社 Tokyo//Testing, Analysis and Measurement
  4. 4 エムアンドケー 千葉本社、京都支店、バンコク支店、シンガポール支店 Chiba//Testing, Analysis and Measurement
  5. 5 エス・ブイ・シー東京 Kanagawa//Testing, Analysis and Measurement
企業ランキングへ

Abrasion Testing Machineの製品ランキング

更新日： 集計期間:Apr 15, 2026～May 12, 2026
※当サイトの各ページの閲覧回数を元に算出したランキングです。

  1. Construction Research Method Peel Testers 'BA-450D' 'BA-400D' 井谷衡機製作所
  2. [Test] Shell Four Ball Test: LWI/WL/ISL エス・ブイ・シー東京
  3. Friction coefficient measurement is possible 【MTM traction testing machine】 島貿易
  4. 4 High Temperature Friction and Wear Testing Machine (THT Series)
  5. 4 OCT-equipped heating observation imaging furnace internal structure visualization system 米倉製作所

Abrasion Testing Machineの製品一覧

61～90 件を表示 ／ 全 91 件

表示件数
Digital Durometer II for Rubber

Digital Durometer II for Rubber

Digital Durometer II for Rubber

With this single unit, you can conduct the following tests: - IRHD hardness test… Micro/Normal/High/Low/Super Soft - Shore hardness test… A/B/C/D/DO/O/OO/OOO <Features> - High precision and high reproducibility. - Automatic measurement with just the press of a start button. - One-touch detector replacement. - Creep/recovery curves can be obtained (with dedicated software). <Rubber Hardness Detector> The replacement of the digitest hardness detector is simple and one-touch. Just plug the detector into the connector on the main bracket, and the controller will automatically recognize it, allowing you to immediately conduct the rubber hardness test. There is no need for troublesome adjustments before testing. We offer a variety of detectors to accommodate different sample shapes and testing methods.

  • Testing Equipment and Devices
  • Abrasion Testing Machine

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Taber Wear Testing Machine "Rotary Abrasion Tester"

Taber Wear Testing Machine "Rotary Abrasion Tester"

In the most common wear test for flat materials, the wear of the contact surface with two wear wheels is evaluated by the reduction in mass, thickness, and gloss.

It is the most common method for wear testing of flat materials, evaluating the wear degree of the contact surface with two wear rings based on changes in mass, thickness, and gloss. We have various types of wear rings available.

  • Testing Equipment and Devices
  • Strength Testing Equipment
  • Abrasion Testing Machine

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
No.275 Mooney Viscometer AM-4

No.275 Mooney Viscometer AM-4

This is a testing machine for measuring the viscosity of unvulcanized rubber and the scorch time of the rubber.

● The Mooney value is automatically calibrated with a built-in weight. ● You can register test conditions and pass/fail criteria. ● Test results can be output to a PC* (optional). ● You can recall past test results (up to 100 data). ● The heater timer function allows for time savings at the start and end. ● It is equipped with overload prevention and overheat prevention devices.

  • Testing Equipment and Devices
  • Viscometer
  • Abrasion Testing Machine

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
No. 215 William-type Rubber Wear Testing Machine

No. 215 William-type Rubber Wear Testing Machine

William-type rubber wear testing machine

As a rubber wear testing machine, it has been widely used for a long time, similar to the Akron method. The test specimen is pressed against a grinding plate with a constant load, and the work done is calculated from the frictional force when the grinding plate rotates, allowing for the calculation of the rubber wear volume.

  • Testing Equipment and Devices
  • Abrasion Testing Machine

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Test machine for linear reciprocating friction and wear testing.

Test machine for linear reciprocating friction and wear testing.

Revolutionary friction and wear testing machine

It is compact and lightweight, making sample attachment and operation easy. It can measure ultra-light loads with low friction force of 50μN. Equipped with a micro-force sensor using a capacitive non-contact displacement meter (Patent Publication 2005-345456). It adopts a high-speed straight reciprocating drive mechanism with a maximum of 100Hz low vibration (Patent No. 4114935). The dedicated software allows data output to be input into a computer, making data verification and observation more convenient.

  • Testing Equipment and Devices
  • Abrasion Testing Machine

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Connector wear testing machine "Precision Micro-Sliding Testing Machine" (under development)

Connector wear testing machine "Precision Micro-Sliding Testing Machine" (under development)

For vibration research of connectors! Visualizing the deterioration of electrical contacts due to micro-sliding.

The "Precision Micro-Motion Testing Machine" is a testing device capable of accurately reproducing the micro-motion (sliding) between electrical contacts, such as connectors, caused by vibrations or impacts. It allows for the observation and measurement of the degradation of electrical contacts due to fretting corrosion. 【Features】 - Precise micro drive (0.1μm resolution) - High straightness - Capable of rectangular wave drive - Visualization function enables recording of temporal changes in phenomena For more details, please contact us or download the catalog.

  • Vibration Testing
  • Automotive Connectors
  • Contract Inspection
  • Abrasion Testing Machine

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
300 kN wear testing machine for single items and others.

300 kN wear testing machine for single items and others.

All wear characteristic data for various fittings can be obtained!

We introduce our commissioned testing and analysis services, specifically tensile testing machines. Are you facing issues related to material testing equipment or analysis instruments? "I want to know the breaking strength of a product, but I don't have a testing machine!" "I want to see the internal condition of a product without breaking it!" "I want to understand the corrosion resistance of a product, but I don't have a testing machine!" In such cases, Japan Katan can assist you. We offer a wide range of testing equipment and analysis instruments, including large horizontal tensile load testing machines, fatigue strength testing machines, analysis instruments for metal elements, the largest industrial X-ray CT scanning device in Japan, and metal wear testing machines. To serve customers from various fields, we provide commissioned testing and analysis services. [Introduction of the 300kN Wear Testing Machine] This testing machine reproduces the wear phenomenon occurring at the connection parts of fittings due to the vibration of insulator devices and measures the amount of wear on the fittings. Please feel free to contact us for more details.

  • Contract Analysis
  • Contract measurement
  • Abrasion Testing Machine

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Ply Adhesion Wear Test Machine

Ply Adhesion Wear Test Machine

The wear and peeling test machine from Pryufbau, which has received very high acclaim in EU countries.

The wear and peeling testing machine from Prüfbau, which has received very high praise in EU countries.

  • Testing Equipment and Devices
  • Abrasion Testing Machine

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Tile Wear Testing Machine (Dual Type) [Stable testing possible with servo motor!]

Tile Wear Testing Machine (Dual Type) [Stable testing possible with servo motor!]

With the use of a servo motor, it is possible to maintain a constant rotation speed and conduct stable tile wear tests!

This is a device for testing the wear resistance of unglazed ceramic tiles. It allows for stable testing using a servo motor. 【Features】 - Uses a servo motor to maintain a constant rotation speed, enabling stable testing. - Two-stage design reduces testing time. - Equipped with a dust collection system to keep the testing area clean. - Easy to move with wheels (4 locations).

  • Testing Equipment and Devices
  • others
  • Abrasion Testing Machine

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Kenyanshi Small Adhesive Peeling Tester 'BA-450' 'BA-400'

Kenyanshi Small Adhesive Peeling Tester 'BA-450' 'BA-400'

For testing the peeling strength of mortar, tiles, etc., and the pull-out strength of pins, easily measure the adhesive strength of samples between two layers.

The peeling test instruments "BA-450D" and "BA-400D" are small and lightweight vertical tensile testers manufactured and improved under the guidance of the Ministry of Construction's Architectural Research Institute, the Building Materials Testing Center, and the Housing and Urban Development Corporation. They allow for easy measurement of adhesive strength of materials between two layers with simple operation (analog display with a needle). They come with a portable case for convenience. 【Features】 ■ Analog display with a needle ■ Measurement possible with simple operation ■ Small and lightweight ■ Usable over a wide range *For more details, please refer to the catalog. Feel free to contact us with any inquiries.

  • Strength Testing Equipment
  • Testing Equipment and Devices
  • Abrasion Testing Machine

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Fatigue wear testing can be performed in a short time【MPR: Pitching Test Machine】

Fatigue wear testing can be performed in a short time【MPR: Pitching Test Machine】

Reproducing rolling contact fatigue (RCF) due to pitching under lubricated/non-lubricated conditions.

【Product Overview】 The MPR Pitching Test Machine is a three-cylinder testing device provided by the UK company PCS Instruments, which generates pitching in a short time by increasing the contact cycles. 【Features】 Compared to general fatigue wear testing machines, it is compact and requires a smaller sample size for testing, making operation simple. In addition to stopping the test based on arbitrary parameters, it allows for interruption and resumption for surface observation of the test specimen. 【Main Evaluation Content】 Fatigue wear testing

  • MPR2.jpg
  • MPR3.png
  • MPR4.png
  • Testing Equipment and Devices
  • Abrasion Testing Machine

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Friction coefficient measurement is possible 【MTM traction testing machine】

Friction coefficient measurement is possible 【MTM traction testing machine】

Automatically measures the traction (friction) coefficient in boundary lubrication, mixed lubrication, and elastohydrodynamic lubrication.

【Product Overview】 The MTM Traction Tester is a tabletop friction and wear testing machine of the ball-on-disk type provided by PCS Instruments in the UK, and it is adopted as a standard device in the lubricants and additives industry. By optimizing friction characteristics, it significantly enhances performance and helps reduce operational costs. 【Features】 It is capable of sliding test specimens of various materials and shapes within a slip rate range of ±10,000%. By using the optional 3D-SLIM, it is possible to observe the formation process of the tribofilms. 【Main Evaluation Contents】 Stribeck curve (friction coefficient × rolling speed) Traction curve (friction coefficient × slip rate) Tribofilm measurement *Optional

  • MTM2.jpg
  • MTM3.jpg
  • MTM4.png
  • Testing Equipment and Devices
  • Abrasion Testing Machine

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
High-Speed Peel Testing Machine 'TE-701'

High-Speed Peel Testing Machine 'TE-701'

Introducing a high-speed peeling tester equipped with highly responsive instrumentation that enables accurate measurements!

The "TE-701" is a high-speed peeling tester for 100m TYPE. It simulates the high-speed peeling phenomenon required for adhesive tapes, tack papers, and various protective sheets. It allows for a wide range of speed settings, and with an optional feature, it can also measure tape rewind strength. It accommodates various conditions such as vertical type, horizontal type, and those with a constant temperature chamber. Additionally, we also offer the 300m TYPE "TE-702" and the constant temperature chamber model "TE-703." 【Features】 ■ Wide range of speed settings available ■ Optional measurement of tape rewind strength ■ Accommodates various conditions such as vertical type, horizontal type, and those with a constant temperature chamber ■ Uses highly responsive instrumentation for accurate measurements *For more details, please refer to the PDF materials or feel free to contact us.

  • Testing Equipment and Devices
  • Strength Testing Equipment
  • Impact Test
  • Abrasion Testing Machine

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
BE-1005 Gelbo Flex Tester

BE-1005 Gelbo Flex Tester

Evaluation of the bending resistance of film with oxygen gas barrier properties.

This is a device for evaluating the pinhole resistance of films. It assumes fatigue failure caused by localized repeated bending due to vibrations during transportation. Pinhole resistance is particularly important for packaging films such as those used for food and medical supplies.

  • Food Testing/Analysis/Measuring Equipment
  • Testing Equipment and Devices
  • Flaw detection testing
  • Abrasion Testing Machine

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Wyzenbeek Abrasion Tester　M278

Wyzenbeek Abrasion Tester　M278

The Wyzenbeek abrasion testing machine is a four-station vibrating abrasion testing machine used to measure the abrasion resistance of materials such as fibers, fabrics, and leather.

The Wyzenbeek abrasion testing machine is a 4-station vibrating abrasion testing machine used to measure the abrasion resistance of fibers, fabrics, vinyl, leather, seams, and other materials. Each station holds the test specimen taut and applies pressure using a contoured foam pad while the specimen is abraded by an abrasive material (usually duck cloth or wire mesh screen) attached to a vibrating drum over a specified number of cycles. Each of the four stations has its own individual test specimen tension and pad pressure settings. This CE-compliant version is specially designed to meet the necessary safety and electrical requirements for compliance. This includes the selection and use of components for electrical connections, mechanical parts, and safety features. These features cover all moving parts and use a dual-action safety interlock that stops the tester when the cover is lifted, as well as a front door interlock for the lower box entrance.

  • fiber
  • Abrasion Testing Machine

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Wear & Pilling Tester "Martindale"

Wear & Pilling Tester "Martindale"

Over 1000 units sold! The predicted time display for test completion contributes to efficiency in the lab.

The "Martindale" is a wear and pilling testing machine that features a newly intuitive and easy-to-operate touchscreen. It allows for a variety of tests on materials such as textiles, socks, leather, coated fabrics, and plywood for wear and pilling. The ergonomic design makes access to the friction table easier, and the 9-sample type achieves smoother operation with the use of a hinged lid. 【Touchscreen Features】 - Designed from the perspective of technicians working in the lab - Enables quick and easy preparation for tests - Visualization of test completion - Independent friction table counter - Display available in 9 languages - Hard, reinforced glass tested for repeated wear in the lab *For more details, please download the PDF or feel free to contact us through the inquiry form on our website.

  • Testing Equipment and Devices
  • Abrasion Testing Machine

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Elastomeric Abrasion Testing Machine 'ElastAbrasion'

Elastomeric Abrasion Testing Machine 'ElastAbrasion'

Achieve productivity efficiency with the 4-system sample stage!

"ElastAbrasion" is an elastomeric wear testing machine suitable for testing the wear of rubber materials such as vehicle tires, engine mounts, and shoe rubber. It achieves higher efficiency compared to DIN wear tests. Additionally, the wear motion using a special Lissajous pattern allows for wear testing that closely simulates real-world conditions during operation. 【Features】 ■ High efficiency ■ Reliable test results ■ Clean testing environment ■ High productivity ■ Flexible testing methods *For more details, please download the PDF or feel free to contact us.

  • Strength Testing Equipment
  • Abrasion Testing Machine

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Wet Abrasion Testing Machine "AquAbrasion"

Wet Abrasion Testing Machine "AquAbrasion"

Contributing to the performance certification of clothing designed to be worn in wet conditions, such as raincoats!

"AquAbrasion" is a wet abrasion testing machine that accurately reproduces wet abrasion tests using water or solutions, and is used for testing the durability of outdoor clothing. It utilizes a controlled pump system to keep the fabric test specimen in a wet state during the test. It is possible to simulate rain using deionized water and to simulate sweat using a sweat solution. 【Features】 ■ Consistent moisture supply ■ LCD control panel ■ Reliable water management ■ Wet & dry functionality ■ Easy access *For more details, please download the PDF or feel free to contact us.

  • Testing Equipment and Devices
  • Abrasion Testing Machine

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Bearing friction and wear testing machine

Bearing friction and wear testing machine

It adopts a circulation method and can be heated up to a maximum of 80°C.

A&D Company, Limited's bearing friction and wear testing machine evaluates the friction characteristics of radial bearings and similar components. The lubrication system uses a circulation method and can be heated up to a maximum of 80°C. *For more details, please contact us.*

  • Testing Equipment and Devices
  • Abrasion Testing Machine

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Friction and Wear Testing Device EFM-3 Series

Friction and Wear Testing Device EFM-3 Series

Scientific elucidation and technical evaluation of the characteristics related to sliding friction, lubrication, and wear.

A&D Company, Limited's EFM-3 series friction and wear testing device is a friction and wear testing apparatus for tribological evaluation tests that complies with JIS K 7218. 〇Features - Complies with JIS K 7218 - Compatible with test specimens such as rings, disks, and pins - Sliding speed range: 0.001 to 1000 cm/sec - Friction force measurement range: 0.02 to 10 N·m - Potential for system customization (addition of measurement and control items, etc.) *For more details, please download the PDF or feel free to contact us.

  • Testing Equipment and Devices
  • Abrasion Testing Machine

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
[Test] Shell Four Ball Test: LWI/WL/ISL

[Test] Shell Four Ball Test: LWI/WL/ISL

Calculate the maximum non-seizing load (LNL) and the fusion load (WL), then compute the load wear index (LWI) for evaluation!

We conduct tests to measure the load-carrying capacity of lubricants. Four steel balls are stacked in a pyramid shape, and a sample is placed in a container. The upper ball is rotated under specified conditions. The four balls and the sample are changed for each test, and the process is repeated until welding occurs. The maximum non-seizure load (LNL) and the welding load (WL) are determined, and the load wear index (LWI) is calculated and evaluated. 【Test Details】 ■ Item Number: L390 ■ Required Amount: 500ml ■ Standard Number: ASTM D2783 ■ Target Oil Types: Machine oil, engine oil, automotive gear oil, industrial gear oil *For more details, please refer to the PDF document or feel free to contact us.

  • Public Testing/Laboratory
  • Abrasion Testing Machine

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
[Test] V104C Pump Test (ASTM)

[Test] V104C Pump Test (ASTM)

Evaluate wear characteristics based on the difference in component weight before and after the test! Using a vane pump.

The test evaluates the lubrication performance of hydraulic fluids for construction machinery using a vane pump. The wear characteristics are assessed based on the difference in component weight before and after the test. The test conditions vary depending on the viscosity of the sample. Please feel free to contact us when you need assistance. 【Test Details】 ■Item Number: P025 ■Required Amount: 60L ■Standard Number: ASTM D7043 ■Target Oil Type: Machine Oil *For more details, please refer to the PDF document or feel free to contact us.

  • Public Testing/Laboratory
  • Abrasion Testing Machine

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
[Test] Falex: Wear

[Test] Falex: Wear

Measure the friction coefficient during the test and the weight of the test pieces before and after the test! Evaluate wear resistance.

We conduct tests to evaluate the wear resistance of samples. A pin attached to the testing machine is clamped between blocks, and a constant load is applied while the pin rotates. The coefficient of friction during the test and the weight of the test pieces before and after the test are measured. Please feel free to contact us if you have any inquiries. 【Test Details】 ■Item Number: L386 ■Required Quantity: 500ml ■Standard Number: ASTM D2670 ■Target Oil Types: Engine oil, automotive gear oil, industrial gear oil, machine oil *For more details, please refer to the PDF document or feel free to contact us.

  • Public Testing/Laboratory
  • Abrasion Testing Machine

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
[Equipment Information] Inspection

[Equipment Information] Inspection

We have microscopes that can capture image data from a camera and perform three-dimensional processing!

Our company possesses inspection equipment such as 3D measuring instruments, 2D measuring instruments, image dimension measuring machines, peel testers, and microscopes. With the 2D measuring instruments, we perform non-contact dimension measurements by calculating imaging data from a CCD camera using a linear scale. Additionally, the peel testers can measure the adhesive strength and peel force of adhesive tapes and release films (release papers). 【Equipment Owned】 ■ 3D Measuring Instruments ■ 2D Measuring Instruments ■ Image Dimension Measuring Machines ■ Peel Testers ■ Microscopes *For more details, please download the PDF or feel free to contact us.

  • Other inspection equipment and devices
  • 3D measuring device
  • Other contract services
  • Abrasion Testing Machine

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Wear Testing Machine 10ch Frame Type 【For Automating Wear Testing!】

Wear Testing Machine 10ch Frame Type 【For Automating Wear Testing!】

Automation of wear testing for printing and surface condition changes! Achieving a maximum friction force of 100N with friction loads ranging from 200g to 1000g!

The "Friction Testing Machine 10ch Frame Type" is a device that rubs the printed surface of a product at a constant pressure and speed to check the condition of the workpiece. The ends of the frame are supported by linear guides, and the reciprocating motion of the actuator generates friction on the workpiece. 【Features】 ■Friction load range: 200g to 1000g ±3% ■Y-axis amplitude: Maximum 50mm, Maximum 30 cycles/min ■Additional channels can be added ■Maximum friction force: 100N *For more details, please refer to the catalog or feel free to contact us.

  • Other measurement, recording and measuring instruments
  • Abrasion Testing Machine

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
[Case Presentation] Numerous test results for friction and wear of mechanical component parts!

[Case Presentation] Numerous test results for friction and wear of mechanical component parts!

If you are having trouble with friction and wear testing machines, testing equipment, or inspection machines! We have a wealth of experience with performance testing devices and durability testing devices related to friction and wear for metals!

We provide a simulation environment based on a model of fundamental functions in development design. Our company has a track record of manufacturing the following testing machines. 【Manufacturing Achievements】 - Performance testing machines related to friction and wear (testing machines for metals, testing machines for fine ceramics) - Durability testing machines related to friction and wear (durability tests under specified load friction) - Other physical property testing machines (friction load characteristic tests under specified temperature conditions) *For details, please download the materials and take a look.

  • Testing Equipment and Devices
  • Abrasion Testing Machine

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Lamborne wear testing machine

Lamborne wear testing machine

Continuous testing support by the automatic specimen supply mechanism.

A&D Company, Limited's Lamborne Wear Testing Machine not only conducts wear resistance tests on vulcanized rubber specimens as specified in JIS K6264-2, but also allows for the observation of the slip rate characteristics of vulcanized rubber through highly accurate friction force and load measurements. 〇 Features - High-precision 2-minute force meter - Automatic specimen supply mechanism - Rolling resistance measurement *For more details, please contact us.

  • Testing Equipment and Devices
  • Abrasion Testing Machine

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

Abrasion Testing Machineの関連カテゴリ

COPYRIGHT © 2001-2026 IPROS CORPORATION ALL RIGHTS RESERVED.