Last Updated： Aggregation Period:Sep 17, 2025～Oct 14, 2025
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Sep 17, 2025～Oct 14, 2025
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Sep 17, 2025～Oct 14, 2025
This ranking is based on the number of page views on our site.
91～105 item / All 166 items
Flat air nozzle for clean rooms, single-sided and double-sided blow type!!
Since it can inject uniform clean air from a long slit, it demonstrates excellent effects in processes such as water drainage after cleaning in large glass clean rooms and uniform heating treatment after orientation film printing.
Air nozzle with built-in heater for generating hot air; capable of uniform hot air injection.
The heater for generating hot air is set inside a uniform spray air nozzle, eliminating unnecessary heat loss through piping and allowing for maximum efficiency with minimal thermal energy. There are options available for compressors, high-pressure blowers, and turbo fans, with heater capacities ranging from 800W to 28kW and spray lengths from 200mm to 1300mm, offering a wide variety of choices. *For more details, please contact us via catalog download or the HP link.*
Long slit-type air nozzle that provides a flat air flow in a linear pattern.
This product has been used in many fields for many years, from general purposes to precision areas (FPD, semiconductor, and optical film manufacturing).
Air nozzle for high-pressure blowers that demonstrates stable performance from low wind speeds up to 150 m/sec.
In the standard model, the air inlet is installed at one location on the back, but by adding multiple inlets, the resistance in the inflow section decreases, making it possible to achieve a stronger film-like jet of air. 【Features】 ○ Ideal for situations where multiple air inlets are needed due to piping constraints, or for tasks such as instant water drainage and rapid drying, especially when a strong wind speed is required. ○ A special internal structure allows for a flat, linear airflow. ○ Since the strong air is arranged linearly, it can uniformly process products with some distortion during water drainage and surface treatment. *For other functions and details, please download the catalog or contact us via our website.
End-blow type air nozzle
This is for turbo fans in case installation of the KT & KTX series with a blow-in type from the upper center is not possible. Thanks to the effect of the internally deformed V-shaped rectifying plate, stable performance is ensured from low to high wind speeds even without an adjustment function. 【Features】 ○ The effect of the internally deformed V-shaped rectifying plate ensures stable performance from low to high wind speeds even without an adjustment function. ○ Airflow speed: 2 to 50 m/s ○ Cleanroom specifications are also available. ● We also manufacture long-sized blow-in type at both ends as a custom order, as well as types for suction and liquids. For other functions and details, please contact us via catalog download or our website.
Air Nozzle DV Series for Compressors
This is compatible with clean rooms that can ensure a high level of cleanliness. It is used for water drainage and dust removal of various glass plates for LCDs and FPDs, as well as for nozzles for heating devices using hot air injection, in various fields that require different levels of cleanliness such as semiconductor manufacturing equipment and food production lines. 【Features】 ○ Used for water drainage and dust removal of various glass plates for LCDs and FPDs, as well as for nozzles for heating devices using hot air injection, in various fields that require different levels of cleanliness such as semiconductor manufacturing equipment and food production lines. ○ Completely disassemblable, allowing for thorough acid washing and electrolytic polishing (passivation treatment) in every corner. ○ Because the results of scientific polishing and linearity can be visually confirmed, it is possible to ensure a very high level of cleanliness. *For other functions and details, please download the catalog or contact us via our website.
Integrated flat air nozzle and hot air generating heater!
This is a compact air nozzle that can be easily installed. Since the heater is cartridge-type, it can be easily replaced with a one-touch mechanism even if you want to change the heater capacity later. 【Features】 ○ Connects to high-pressure air equipment or compressors within the factory for use. ○ Standard type available for maximum hot air temperature of 200 degrees, and R type for up to 500 degrees. ○ The cartridge-type heater allows for easy one-touch replacement if you want to change the heater capacity later. ○ The main body is made of SUS304, and the heating element uses nichrome wire or kanthal wire, achieving a high heat exchange rate due to its special internal design, providing excellent durability for high-temperature use. ○ Compared to traditional heating methods, the heater is installed close to the workpiece, resulting in less heat loss through piping and quicker temperature rise. ○ Heat and air are concentrated, allowing for drying and heating operations in minimal space and time. ○ Simultaneous water drainage and instant drying or heating treatment are possible. ○ In rapid drying operations, the finely dispersed moisture evaporates instantly, leaving no stains.
Minimum space, shortest time for drying and heating! Hot air nozzle for high-pressure blowers.
Ideal for instant drying of sheet-like work! The flat air nozzle is integrated with a hot air generating heater! This air nozzle connects to a high-pressure blower to provide hot air at low to high wind speeds. 【Features】 ○ Uses titanium-added carbide-stabilized steel for the heat source, enhancing durability ○ Development of a special internal flow structure achieves both miniaturization and reduced pressure loss ○ Dedicated mounting brackets are available for easy installation ○ Maximum continuous use temperature: 280 degrees ○ Compared to conventional heating methods, the heater is installed close to the workpiece, resulting in less heat loss through piping and faster temperature rise ○ Concentrated heat and airflow allow for drying and heating operations in minimal space and time ○ Simultaneous water drainage and instant drying or heating treatment are possible ○ In rapid drying operations, fine moisture evaporates instantly, leaving no stains ○ Two types of heaters are available: A type with a 75mm square and B type with a 100mm square.
Remove the inlet of the KT and KTX nozzles for the turbo fan and integrate it with the HAT-type heater!
This is an air nozzle that achieves significant performance improvements and miniaturization through a full model change. 【Features】 ○ Maximum continuous use temperature: 280 degrees ○ Compared to methods using conventional heat generation devices, the heater is installed close to the object being processed, resulting in less heat loss through piping and faster temperature rise. ○ Heat and air are concentrated, allowing for drying and heating operations in the smallest space and shortest time. ○ Simultaneous water drainage and instant drying and heating treatment are possible. ○ In rapid drying operations, the fine moisture evaporates instantly, leaving no stains. * Please contact us for information on model selection, combinations, and heat calculations.
Ideal for sites that dislike protruding screws!
This is the T series multi-slit jet air nozzle for high-pressure blowers. 【Features】 ○ Designed to minimize distortion of the slits even when used at high temperatures ○ The dimensions and pressure loss characteristics of the body, excluding the ejection part, are almost the same as those of the original nozzle ○ Effective injection length: 100 to 2600 mm ○ Injection port specifications: 0.8 mm × 21 mm ○ Inlet: PT1" (external thread) to PT2" (external thread)
We have a variety of models in our lineup, including central blow types and high-precision lip types!
This catalog introduces jet air nozzle products for cold air, hot air, and steam. We offer a variety of models, including the "Central Blowing Type CX-CLX Series" with high wind speed specifications, and the "High Precision Lip Type LDN-LDLX Series" for gases and liquids. Please use this for selecting products. 【Featured Products (Excerpt)】 ■ Central Blowing Type CX-CLX Series ■ High Precision Lip Type LDN-LDLX Series ■ DV Series for Clean Room Specification Compressors ■ DV Series for Clean Room Specification High-Pressure Blowers ■ Distar Nozzle for Remote High Wind Pressure *For more details, please refer to the PDF document or feel free to contact us.
Compact design ideal for production line integration!
The "Mecha Swing Nozzle" is a compact-sized air blow nozzle product that is ideal for integration into production lines. It can blow with three times the range of a typical flat nozzle, allowing for a reduction in the number of nozzles used, which saves on electricity costs while improving blowing effectiveness. If you apply through the "Demo Request Form" on our website, we can also lend you a demo unit.
A uniform collision force distribution in the width direction is achieved, maintaining uniformity even when multiple units are arranged. This nozzle is designed for low noise, making it ideal for noise control in long products and wide lines.
By reducing the unevenness of air blowing, we can decrease the total air consumption and further enhance noise reduction effectiveness. Optimizing factory air nozzles, when done properly, not only leads to lower noise levels but also contributes to energy savings. The air blaster is an air nozzle developed to meet such needs. Please feel free to contact us regarding optimization. 【Features】 - Unique internal design enables low noise operation. - The impact force distribution of the air is uniform across the spray width. - Due to the uniform distribution, it allows for even cooling and consistent blowing. - The spray thickness is thin, enabling high-impact and efficient blowing.
This air nozzle features a low-noise design that allows for powerful impact and uniform straight-line air injection, making it effective for optimizing spot blowing.
This is an air nozzle developed for the purpose of optimizing spot blowing, featuring low noise and uniform straightness, making it ideal for dust removal, water drainage, drying of products and parts, as well as for the removal of oil, dirt, and cooling.
The optimization of air nozzles yields benefits such as noise reduction, lower energy costs, and improved quality. We also provide a wealth of technical documentation.
The Everloy air nozzle maximizes the use of compressed air. In pursuit of this philosophy, we devise various internal structures for nozzles and design the optimal air nozzle. To optimize the air nozzle, we believe it is important to ensure that it can perform effectively with minimal air volume while also maintaining an even distribution of the air velocity (impact force) that is ejected. At Everloy, we use cutting-edge fluid analysis to repeatedly simulate the uniformity of the impact force distribution, prototype based on these simulations, and verify the results through actual measurements before commercialization. Additionally, fluid analysis is also applied to compare different shapes. By comparing them, we analyze and understand the characteristics of various air nozzles, verifying which type is most suitable for energy saving, high impact force, low noise, and high efficiency, and we have published a number of developed nozzles. For more details, please contact us or refer to our catalog.
