Last Updated： Aggregation Period:Sep 17, 2025～Oct 14, 2025
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Sep 17, 2025～Oct 14, 2025
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Sep 17, 2025～Oct 14, 2025
This ranking is based on the number of page views on our site.
1～12 item / All 12 items
Removal of machining burrs and press mold burrs.
Remove burrs created by cutting, machining, pressing, etc., and add an R (rounded) edge to the corners. For more details, please download the catalog or contact us.
A deburring tool developed by a specialist in cutting tools with over 125 years of experience in Germany. The patented cross-hole deburring tool 'EWR 500'.
The 'EWR 500' reliably removes burrs between the tool and hole wall that could not be completely eliminated by conventional reaming in a short time. It is a unique product with a patented tool shape by Gühring. The coolant pressure applied radially closes the gap between the reamer and the hole wall during processing. By utilizing coolant pressure, burrs at the intersection of holes can be reliably removed. By adopting the above processing method, damage to the hole wall can be almost eliminated. *For more details, please refer to the PDF document or feel free to contact us.
A deburring tool developed by a specialist in cutting tools with over 125 years of experience in Germany. Deburring for hole entrances/exits and intersecting holes, 'EW 100 G'.
The 'EW 100 G' allows for deburring of hole entrances/exits and intersecting holes with a single setup and short cycle time. It can be offered at a competitive price compared to custom-made products due to its standard product lineup. It is applicable to processing hole diameters with a tool call diameter variation of ±0.25mm. The deburring process can be automated with fewer setups and shorter cycle times. It can replace high-cost manual processes that require skilled operators. *For more details, please refer to the PDF materials or feel free to contact us.*
A deburring tool developed by a specialist in cutting tools with over 125 years of experience in Germany. 90° burr removal for hole entrances/exits 'EW 100 VR'.
The front/back deburring tool 'EW 100 VR' allows for 90° deburring of hole entrances/exits through an arc interpolation program. It features cutting edges at 90° on the front and back surfaces of the diamond-shaped tip. The deburring process follows the contour of the hole thanks to the arc interpolation program. Made from solid carbide with an alumina coating, it ensures stable processing and finishing. *For more details, please refer to the PDF document or feel free to contact us.*
We provide high-quality surface treatment and edge processing technology! We support the production of higher quality products.
This catalog features a wide range of products handled by Extrude Hone. Since our founding, we have consistently provided cutting-edge manufacturing technology for 40 years. We have created high-quality surface finishes for the world. Through relentless technological innovation and a deep understanding of our customers' needs, we contribute to solving complex deburring and surface treatment issues in all manufacturing industries. [Contents] ■ Abrasive Flow Machining (AFM) ■ MicroFlow AFM ■ Thermal Energy Method (TEM) ■ Electrolytic Machining (ECM) ■ Various Contract Processing Services ■ Extrude Hone Customer Service *For more details, please refer to the PDF document or feel free to contact us.
A established mass production system from deburring to finishing and shipping inspection!
■Points: In many years of mass production, the issue of "deburring," which is inherent in metal processing, cannot be overlooked. At our company, Clair, we have established a system that covers everything from selecting methods to prevent burrs, educating workers, to final finishing. ~ Clair Co., Ltd. also offers various other processing services. ~ ● Cutting processing (prototyping, small lots, mass production) → We can accommodate everything from single items and prototypes to mass-produced products. ● Various surface treatments are also available. Anodizing, various plating, painting, heat treatment ● Jig manufacturing, mold design and production, press processing *For more detailed information about [our company Clair], please see here↓↓↓
Even the fine burrs that I had given up on are resolved all at once! Fine burr removal, polishing, and cleaning can be done simultaneously!
"SEP processing" is a technology that immerses products in a special liquid to dissolve the surface and remove burrs. "Barrel polishing issues such as stone clogging, polishing residue, and corner rounding." "Inspection of burrs on precision parts is conducted by many people, sorting all items with a magnifying glass." "Finishing the roughness of the inner diameter surface of deep hole machining and pipe materials is difficult," etc. This is recommended for those facing such challenges. Even the fine burrs that you have given up on until now can be resolved all at once. It enables the miniaturization of parts! Please feel free to contact us for prototype consultations and more. 【Features】 ■ Extremely small mass production items ■ Simultaneous removal of fine burrs, polishing, and cleaning ■ Enables miniaturization of parts *For more details, please refer to the PDF materials or feel free to contact us.
![[SEP Processing Example] Removal of burrs from fine holes (Φ0.1mm or less)](https://image.mono.ipros.com/public/product/image/db6/2000457692/IPROS46425719579801188034.png?w=280&h=280)
It is possible to deburr the entrances and exits of fine holes, polish the inner diameter, and enlarge (at the micron level).
Have you ever experienced this with deburring of fine holes (Φ0.1mm or less) + polishing of the outer diameter and inner diameter (entire surface)? "We couldn't accept orders because deburring was difficult due to numerous fine hole processes." "We gave up because the roughness of the inner diameter couldn't be finished." "Deburring occurs on the surface when chamfering due to the small hole diameter." With SEP treatment, it is possible to deburr the entrances and exits of fine holes, polish the inner diameter, and enlarge (at the micron level). [Case Study] ■ Before treatment: Overall rough feeling with poor light reflection ■ After treatment: No rough feeling as before, with much better light reflection *For more details, please refer to the PDF document or feel free to contact us.
Remove only the burrs without causing warping or distortion, such as bending, without scratching the surface! Introduction of case studies.
Here is a case study of fine burr removal from precision parts. We received a request for burr removal from a precision press-cut plate with a thickness of 0.3mm, featuring a φ5.5 hole at the center of a 17x17 square. The burr around the φ5.5 hole measured 4 to 5μm in height. If stacked as is, the hole area would slightly bulge, resulting in an uneven height and failing to achieve the desired characteristics. Therefore, we removed only the burr without causing warping or distortion, and without scratching the flat surface. Additionally, we were able to remove large burrs caused by die chipping in the same plate, measuring 520μm in width, 65μm in depth, and 15μm in height, by matching the media and processing conditions. *For more details, please refer to the PDF document or feel free to contact us.
Please consult with us before worrying about whether deburring such materials is possible!
★ISO9001-2008 Certification★ Are you troubled by burrs generated in various parts processing stages? Our burr removal using barrel polishing technology thoroughly meets customer demands, whether it's for mass-produced items, small to large parts, or various shapes. Before you wonder, "Is this kind of burr removal possible?" please consult Nishimura Giken. 【We solve these questions and requests】 □ "Can I polish precision parts?" □ "Is this part polishable?" □ "I want to do polishing that my current supplier can't provide..." Our technical specialists are here to respond to your inquiries! Feel free to contact us.
We propose processing machines tailored to various processing conditions!
The main materials for cleaning and polishing are zinc shot, stainless steel cut wire, pure aluminum cut wire, and alloy aluminum cut wire. We propose processing machines tailored to the purpose of treatment, product shape, processing volume, and various processing conditions, including deburring, impurity removal, matte finishing, and product recycling. Our lineup includes the "FT-100," which is suitable for processing small items in large quantities with a tumbling type, the "FJS-500SL," which features a variable blast zone with a single hanger type, and the "FTB-25," which allows for automatic loading and unloading of small products. 【Features of the processing machines】 ■FT-100 - Tumbling type, suitable for processing small items in large quantities - Effective product size: Φ700×800mm ■FJS-500SL - Single hanger type with a variable blast zone - Effective product size: Φ500×1000mm *For more details, please refer to the related links or feel free to contact us.
