Last Updated： Aggregation Period:Sep 03, 2025～Sep 30, 2025
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Sep 03, 2025～Sep 30, 2025
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Sep 03, 2025～Sep 30, 2025
This ranking is based on the number of page views on our site.
46～60 item / All 115 items
The world's only film that visualizes contact pressure.
The world's only pressure measurement film. It allows you to easily check pressure and pressure distribution that were previously invisible.
![[Presscale Use Case] CMP Polishing Head](https://image.mono.ipros.com/public/product/image/d2f/2000983973/IPROS64294872587000810618.png?w=280&h=280)
Significant improvement in design efficiency! Introducing examples of achieving time reduction and quality enhancement.
We would like to introduce a case where a prescale was utilized to confirm the uniformity of the CMP polishing head. Continuing production without a clear understanding of the causes of polishing defects led to issues such as insufficient precision and frequent occurrences of defective products. After implementation, we achieved time savings and quality improvement by gaining useful insights into polishing uniformity and the adjustment of polishing speed. 【Case Overview】 ■Challenges - Insufficient precision - Frequent occurrences of defective products ■Results - The uniformity of the contact area could be adjusted during the design phase, significantly improving design efficiency. - We were able to reduce variability between CMP devices. *For more details, please refer to the PDF document or feel free to contact us.
![[Presscale Utilization Case] Cylinder Head Gasket](https://image.mono.ipros.com/public/product/image/7d3/2000983986/IPROS94910198057176874518.png?w=280&h=280)
Improvement in efficiency and stability of quality is possible! Introducing a case where design efficiency has significantly increased.
We would like to introduce a case where we utilized press scale to continuously check the sealing performance of gaskets, with the aim of enhancing design efficiency and quality. Previously, there was no means to confirm whether the air/cooling water/engine oil inside the cylinders of prototypes and newly manufactured products were securely sealed, and we had no choice but to verify this through practical running tests. After implementation, we were able to significantly improve design efficiency compared to the trial-and-error approach in practical applications. [Case Overview] ■Challenges - Sealing performance could not be confirmed until practical running tests ■Effects - Evaluation under actual operating conditions became possible without running the engine *For more details, please refer to the PDF document or feel free to contact us.
Contributing to the creation of high-quality and safe products! Introducing various applications in the automotive industry.
This document presents a wide range of applications for "Presscale," which broadly supports the development and manufacturing processes of automobiles. It includes numerous examples of its use in EVs, HEVs, FCVs, and in engine compartments. In the future, as electric vehicles, hybrid vehicles, and fuel cell vehicles are expected to be mass-produced, this product will play an important role in their development and manufacturing processes, contributing to the creation of higher quality and safer products. [Contents] ■ Examples of use in EVs, HEVs, and FCVs ■ Examples of use in engine compartments ■ Other examples of use in the automotive electronics field ■ Examples of Presscale measurement results ■ Examples of use throughout the automobile *For more details, please refer to the PDF document or feel free to contact us.
Applying technology to measure the brightness and color distribution of objects for quality control of LED displays!
The "LED Dot Correction Controller" is a product that applies the technology of analyzing images from a CCD camera to measure the luminance and chromaticity distribution of objects for quality control of LED displays. Even among LEDs of the same manufacturer and model, there can be variations in luminance and chromaticity. Therefore, to achieve a uniform luminance and chromaticity distribution in LED displays, it is necessary to perform output correction for the emission of each individual LED. By applying this system to address this issue, we capture the variations in luminance of each LED based on the measured results, and by adding feedback control to ensure uniformity, we correct the output levels to eliminate luminance unevenness. 【Features】 ■ Reduces variations in luminance of individual LEDs ■ Corrects output levels through feedback control ■ Eliminates luminance unevenness *For more details, please refer to the PDF materials or feel free to contact us.
Measurement of zeta potential for individual fine particles using visible particle measurement! Measurement of particle size distribution through Brownian motion is possible!
The "ZEECOM (ZC-3000)" is a zeta potential and particle size distribution measurement device that automatically tracks the movement of microparticles in real-time through image processing. It measures the surface charge state that changes with the solvent. The isoelectric point is determined from the responsiveness of the zeta potential to pH. Additionally, it evaluates colloidal particles from multiple angles through measurements of particle size and zeta potential. 【Features】 ■ Advanced image processing added to microscopic electrophoresis ■ Particle size distribution measurement through automatic tracking of Brownian motion (optional) ■ Histogram analysis using individual data of microparticles ■ Real-time measurement / Archive measurement capability ■ Particle size distribution measurement via Brownian motion *For more details, please refer to the PDF document or feel free to contact us.
![[Data] Evaluation Method for the Number of Fine Particles (High Dispersion of Fine Particles/Solution Dispersion)](https://image.mono.ipros.com/public/product/image/fe3/2000419606/IPROS9506969081626803366.jpg?w=280&h=280)
Evaluation of the number concentration of fine powders! Measurement from both fine powder and solution dispersion perspectives.
This document discusses the issues related to powder evaluation, particle classification using the DMA method, and particle size distribution measurement through the ionization of powder dispersion solutions, focusing on the quantitative evaluation of fine powders. There are two methods for the quantitative evaluation of fine powders: evaluating them as fine powders and evaluating them after dispersion in a solution. In the "evaluation as fine powders," agglomerate-prone powders are assessed based on primary particle size. The proportion of their presence is analyzed through multi-channel measurements. In the "evaluation after dispersion in a solution," particle size distribution measurement from 2.5 nm allows for the evaluation not only of primary particle size but also of agglomeration states and particle classification. [Content Summary (Excerpt)] ■ Quantitative evaluation methods for fine powder samples ■ Fine powder evaluation using a high-dispersion powder generation device - RBG1000 ■ Generation mechanism of RBG1000 ■ Fine powder particle size distribution evaluation ■ Fine powder evaluation methods (100-1000 nm range) *For more details, please refer to the PDF document or feel free to contact us.
High-speed scanning
High-speed scanning of the magnetic flux trap states between electromagnets and superconductors controlled by a computer.
User-friendly design! It is possible to obtain sample-specific fingerprints.
The "LUMiSizer," developed by LUM GmbH using STEP technology, allows for real-time acquisition of the transmission light profile of samples. By analyzing the transmission light profile with the dedicated software "SEPView," it is easy to assess dispersion stability, particle size distribution, wettability evaluation, and more. Additionally, it can evaluate up to 12 samples simultaneously across a wide temperature range of 4 to 60°C and a maximum of 2300G, making it suitable for various applications. 【Features】 ■ Simultaneous measurement of up to 12 samples ■ Ability to obtain sample-specific fingerprints ■ Rapid and direct evaluation of dispersion stability ■ Measurement of particle size distribution for high-concentration samples ■ Measurement of particle density *For more details, please refer to the PDF document or feel free to contact us.
Local vector magnetic sensor equipped with probe method and H-coil method! Measurement is possible not only for motors but also for transformers and other devices.
The "VMPVS-1000 Series" is a two-dimensional magnetic property visualization device capable of measuring the magnetic characteristics of actual objects. It recognizes the shape of the measurement target using a built-in small video camera and sets the measurement position using mesh data utilized in numerical analysis. Comparing numerical analysis results with measurement results is easy, and manual measurements are also possible. 【Features】 ■ Capable of measuring in narrow areas with complex shapes of motors ■ Measurement locations are automatically set based on mesh data ■ Equipped with local vector magnetic sensors using probe and H-coil methods ■ Developed ultra-small local two-dimensional magnetic sensors using fine wire processing technology ■ Received the Kyushu Bureau of Economy, Trade and Industry Director's Award at the 6th Monozukuri Nippon Grand Award *For more details, please refer to the PDF materials or feel free to contact us.
High-speed waveform control realized with FPGA! Controlling the magnetic flux density waveform is essential for accurate evaluation.
The "Bcon-01" is a magnetic flux density waveform control device capable of high-precision magnetic property measurements with a 0.01T step. It employs an FPGA (field-programmable gate array) for waveform control, enabling high-speed measurements. By using this device, you can control the magnetic flux density waveform to a sine wave. 【Features】 ■ High-precision magnetic property measurements with a 0.01T step ■ Measurement frequency ranges from 50Hz to 1kHz ■ Input considerations for B coil, H coil, and shunt resistor connections ■ One auxiliary input channel available for signals you want to measure synchronously ■ Distortion rate and amplitude of the control waveform (sine wave) can be set arbitrarily *For more details, please refer to the PDF document or feel free to contact us.
We accept commissioned measurements using this device! Please feel free to contact us.
We would like to introduce our iron loss visualization device, the 'LVSFM Series'. It enables the visualization of iron loss distribution using a thermal imaging camera, allowing for measurement of iron loss in its original shape. Additionally, we offer contract measurements using this device. Please feel free to contact us. 【Features】 ■ Visualization of iron loss distribution using a thermal imaging camera ■ Measurement of iron loss in its original shape ■ Developed with support from the Ministry of Economy, Trade and Industry's Strategic Base Technology Advancement Support Program for the fiscal year 2017 ■ Main application is the measurement of iron loss in motor cores *For more details, please refer to the PDF document or feel free to contact us.
Film for dose measurement in the fields of radiological diagnosis, radiation therapy, and industrial applications.
"GAFCHROMIC Film" is a film that does not require development for dose detection. It is broadly categorized into three types: radiation therapy, radiation diagnosis, and industrial use, with a rich lineup available. Please feel free to contact us if you have any requests. 【Features】 ■ Does not require development processing ■ Real-time image generation by radiation ■ Usable underwater ■ Easy handling and cutting in a bright room *For more details, please download the PDF or contact us.
Compact and easy to carry! Improved maintainability with detachable charging system!
"PAMS" is a portable particle size distribution measuring device with improved maintainability due to its detachable charge feature. It is compact and easy to carry, as it is battery-operated and does not require a PC. It can measure particle size distribution in two ranges: wide range and high resolution. The adoption of a neutralizer using a bipolar charging method eliminates the need for radioactive materials. 【Features】 ■ Detachable charge feature ■ Improved maintainability ■ Compact and easy to carry ■ Capable of measuring particle size distribution in two ranges *For more details, please refer to the PDF document or feel free to contact us.
