Last Updated： Aggregation Period:Apr 08, 2026～May 05, 2026
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Apr 08, 2026～May 05, 2026
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Apr 08, 2026～May 05, 2026
This ranking is based on the number of page views on our site.
271～300 item / All 466 items
High-pressure clamp hydraulic equipment clamping cylinder
This is a single-acting hydraulic cylinder. The plunger is hollow, making it easy to attach to fixtures. For more details, please contact us or refer to the catalog.
Equipment for lifting super-heavy objects to high places.
The high-quality opening and closing chuck mechanism and wire drive the hydraulic strand jack, allowing for the safe movement and installation of large and heavy tanks, as well as the lifting and installation of construction structures. With a graphic automatic control device, all aspects such as lifting stroke, speed, center of gravity, and load capacity are centrally managed and controlled.
Strong against shock during switching, operates smoothly! Intermediate cylinder and pressure retention are also possible!
The "G46-22 Series" is a hydraulic directional control valve with a poppet structure inside the valve, which operates smoothly without shock during switching or hydrostatic pressure during prolonged power supply. It features a built-in check valve in the body, allowing for intermediate pressure retention in the cylinder. The "screw-type residual pressure release" at the top of the valve enables pressure release even without power supply. 【Features】 ■ Flow rate: 20L/min ■ Standard voltage: DC24V (also compatible with AC100V/200V) ■ Bolt tightening torque: 23N·m ■ Includes DIN connector with pilot lamp ★ The latest comprehensive catalog is scheduled to be published in January 2016 ★ If you would like a copy, please apply through "Contact Us"! * You can view the catalog for this product from "Download."
Multi-stage telescopic with a tilt saddle that allows for an incline of up to 5 degrees.
The "Multi-stage Telescopic Hydraulic Cylinder Series" is a product equipped with a tilt saddle that allows for an inclination of up to 5 degrees. Additionally, it comes standard with two certified lifting eyes. 【Features of the RT Series】 ■ Maximum capacity: 137 - 309 kN ■ Stroke: 270 - 600 mm ■ Maximum operating pressure: 70 MPa *For more details, please refer to the PDF document or feel free to contact us.
The maximum operating pressure is 70MPa! Eccentric loads of up to 3% of the cylinder's maximum capacity are possible.
The "2-stage telescopic cylinder (load return)" is a hydraulic cylinder that incorporates two plungers. Compared to a single plunger cylinder, it allows for a longer stroke in a limited space. We also offer a "3-stage telescopic cylinder (load return)" that incorporates three plungers. 【Features】 <2-stage telescopic cylinder (load return)> ■ Improved wear resistance on both inner and outer surfaces due to nitro carburizing surface treatment ■ Prevents corrosion and damage to the inner surface of the cylinder ■ Ensures product lifespan and safety in harsh environments ■ Can withstand eccentric loads up to 3% of the maximum capacity of the cylinder ■ Can be used at maximum load capacity during the first stage stroke *For more details, please refer to the PDF document or feel free to contact us.
For connecting hydraulic equipment at construction and shipbuilding sites! The flat shape of the connection part prevents the intrusion of foreign substances.
This product is a "flat face one-touch coupler" that allows for secure connection of male and female couplers with a single touch operation, and easy disconnection. The flat shape of the connection part prevents the intrusion of foreign substances and facilitates cleaning of the coupler, making it suitable for connecting hydraulic equipment at construction and shipbuilding sites. Due to the flat shape of the connection part between the male and female couplers, there is no oil leakage during attachment and detachment. 【Features】 ■ The coupler is equipped with a rubber dust cap and a turn lock (anti-disconnection) mechanism at the coupling part. ■ The F-604 type coupler has been approved for safety and performance by HTMA. ■ Secure connection of male and female couplers with one-touch operation. ■ The flat shape of the connection part prevents the intrusion of foreign substances. ■ Suitable for connecting hydraulic equipment at construction and shipbuilding sites. *For more details, please refer to the PDF materials or feel free to contact us.
For the efficiency of bolt work! Improve operator safety with a hands-free solution.
This product is a backup wrench for torque wrenches that contributes to improving operator safety with a hands-free solution. It eliminates the need for impact wrenches and streamlines bolt work. It includes a quick-connect carabiner, a stainless steel strap, and a safety cable with an Allen key fixture. 【Features】 ■ Spark-free ■ Does not lock during operation ■ Eliminates the need for impact wrenches ■ Accommodates two hex sizes with one tool ■ Enhances operator safety *For more details, please refer to the PDF document or feel free to contact us.
Ideal for locking cylinders! A lineup of contact bolts and flange mounts available.
We would like to introduce the clamp cylinder accessories that we handle. Starting with the contact bolt "BS Series," which can be attached to the end screw of the cylinder and used as a workpiece pressing fixture, we also offer flange nuts "FN Series," flange mounts "MF Series," and more. In addition, we also handle clamp cylinder mounting blocks "MRS-100F, MRS-200F, MRS-300F." 【Features】 ■ Flange Nut "FN Series" - Suitable for locking the cylinder after mounting a body screw type cylinder at any desired position. ■ Flange Mount "MF Series" - Allows for the fixing of the cylinder using a square flange mount according to the application. *For more details, please refer to the PDF materials or feel free to contact us.
Due to its low height, it can be lifted and moved with minimal effort! Depending on the application, handles and connecting bars can be attached to the MLSR set.
The "MLS Series" is a wheeled road skate that allows for the safe movement of various heavy equipment. With the steerable skate from MLSF, you can easily operate it with a turntable that allows for smooth rotation even under load, making it suitable for general applications. Additionally, we offer products such as the "Nylon Wheel Kit," which is ideal for reducing wear resistance and increasing capacity, as well as the "SOH Series, Machine Lift" and "LW Series, Lifting Wedge." 【Features】 ■ Low profile allows for lifting and moving with minimal effort ■ MLSR rotating skate enables 360-degree directional changes, providing high versatility and suitability for tight spaces ■ Models equipped with nylon wheels are available upon request ■ Handles and connecting bars can be attached to the MLSR set according to application needs *For more details, please refer to the PDF materials or feel free to contact us.
The powerful blade (chisel) can be re-sharpened! It can be used for various applications such as track maintenance and structures.
The "NC Series" is a hydraulic nut cutter that has become easier to use due to its unique angled head design. It can be used for various applications such as railway maintenance, plumbing work, tank maintenance, petrochemical plants, steel materials, mining, and structures. The double-blade type splits the nut with a movable blade and expands it with a fixed blade, allowing the nut to be rotated and removed manually in one operation. 【Features】 - Easier to use due to the unique angled head design - The cylinder of the nut cutter is single-acting with a spring return type - Each nut cutter comes standard with a spare blade (chisel), screws and a wrench for fixing it, and a female coupler * All models require a hydraulic pump and hydraulic hose * For more details, please refer to the PDF materials or feel free to contact us.
One operator can work alone! Capable of operating in corners, areas with obstacles, and on slopes of 3%.
The "EMLS/EMV series" is a battery-operated machine skate designed for positioning heavy loads of up to 50 tons. It can be operated by a single operator, allowing for the execution of many projects with fewer resources and a quick return on initial investment. With a single charge, it operates for 3 hours and can move heavy loads over 1,200 meters without changing the 24V battery, while also traveling at a maximum speed of 8m/min even when loaded. 【Features】 ■ Two agile drive motors and a tilt saddle that rotates 360 degrees ■ Capable of working in corners, areas with obstacles, and on slopes of 3% ■ Safe remote operation by the operator without the need to push or pull manually ■ Easy adaptation to changing situations ■ Consistent performance every time *For more details, please refer to the PDF document or feel free to contact us.
Maintain recovery measures from displacement and wedges in bridge structures! A case of providing hydraulic solutions.
Minimizing the time that State Route 266 is closed was a primary objective when reconstructing the bridge over the Holbrook Canal. The new bridge was initially used as a detour while the defective bridge was being demolished, but once the old bridge was taken down, the new bridge needed to be slid into place at the original bridge's location. To achieve this, Enerpac provided a hydraulic solution that could push the new 44.5-foot bridge structure into position using a lateral sliding method with PTFE slide elements. The slide was completed in 52 minutes. **Case Summary** - Customer: Kiewit (United States) - Products: RR Series double-acting hydraulic cylinders, ZU Series hydraulic pumps - Result: The slide was completed in 52 minutes. *For more details, please refer to the PDF document or feel free to contact us.*
A case of designing and manufacturing a custom RR hydraulic cylinder that meets strict dimensional specifications!
The crawler transporter, built in 1965, has been transporting rockets and spacecraft to the launch pad at Kennedy Space Center for over 40 years. However, modifications were necessary to transport combinations of rockets and launch towers that are heavier than the rockets for which the crawler was designed, and considerable force was required to remove and install new bearings to attach the redesigned traction roller assembly to the crawler track. Enerpac designed and manufactured custom RR hydraulic cylinders that provide the appropriate amount of force and conform to strict dimensional specifications. The ZU hydraulic pump has been widely used in this demanding duty cycle application and has demonstrated excellent performance. *For more details, please refer to the PDF document or feel free to contact us.*
Positioning a 3,600-ton tunnel boring machine at the starting point! A case of a 2.5 km underground twin tunnel.
We would like to introduce a case study of the EVO synchronous lifting system and the CLRG series cylinders. The construction of the 4.5 km Waterview Connection highway includes the deployment of a ground pressure balance machine to excavate a 2.5 km underground twin tunnel. To initiate the tunnel excavation process, it was necessary to position a 3,600-ton tunnel boring machine at the starting point. Ten 600-ton cylinders equipped with internal stroke sensors controlled by the EVO synchronous lift system descend to tilt the tunnel boring machine into the starting position. Once the positioning is complete, tunnel excavation begins. After the first tunnel's length is completed, the system is redeployed to lift and tilt the machine to complete the other parallel lengths of the twin tunnels, ultimately returning to the starting point. *For more details, please refer to the PDF materials or feel free to contact us.*
Each cylinder was mounted on a steel stool connected to the building's foundation!
After a devastating earthquake, 2,800 tons of buildings in the city center fell from their foundations, requiring a lift of up to 300mm to level them. Using the EVO synchronized lifting system, we managed the lifting force and extension of 22 high-tonnage double-acting CLRG series hydraulic cylinders, safely and accurately raising the foundation and buildings to the required position. Draw wire stroke sensors were installed at each lifting position, providing displacement information to maintain synchronization accuracy of less than 1mm across all positions. By managing the lift operations from a single central control system, safety and operational productivity were improved. 【Case Overview】 ■Customer: Sync Lift Systems Ltd. (Christchurch, New Zealand) ■Product: EVO Synchronized Lifting System, CLRG Cylinders *For more details, please refer to the PDF document or feel free to contact us.
Provides clear feedback on movement distance, stroke, and load per point!
At Oyu Tolgoi, one of the largest known copper and gold deposits in the world, there was a need to install steel linings in vertical ore bodies with a maximum diameter of 3 meters and depths of 30 to 70 meters, and they were looking for a safe and reliable solution that provides precision and synchronized control. Enerpac strand jacks are powered by electric or diesel-driven hydraulic power packs and are fully controlled by the unique SCC-Smart Cylinder Control System for lifting operations. These are ideal for customers seeking accurate synchronized control with the capability to lift heavy loads in an economical, compact, and reliable installation footprint. The company used four "HSL7006 strand jacks" for the installation of the steel linings. With automatic lock/unlock operations, the system is controlled by one operator from a central location, enhancing safety. It not only strengthens synchronized control during descent but also allows for fine adjustments while descending to remove obstacles during installation. *For more details, please refer to the PDF document or feel free to contact us.*
A case where four double-acting aluminum hydraulic cylinders lowered the yacht by 100mm at once!
A luxurious sailing yacht worth millions of dollars was jacked up by 2 meters for renovations. After the modifications, it was necessary to lower the hull to return the yacht to the sea. Although the yacht was made of carbon fiber, it still weighed 80 tons, and the weight was not evenly distributed. The uneven weight distribution posed a serious challenge for safely lowering the yacht. Therefore, the "EVO-W Series Synchronous Lifting System" was used to safely lower the yacht with precise control. The stage lifting operation mode, featuring nine pre-set working modes, allows a single operator to monitor and control the stroke and center of gravity from a touchscreen display. *For more details, please refer to the PDF document or feel free to contact us.*
1,500 tons of pulling power! Used for loading utility, excavation, and process modules!
The ocean production facility is expected to be constructed in the Gulf of Mexico, positioned at a depth of over 5,000 feet. To build the tension leg platform, it was necessary to slide approximately 7,000 tons of modules into place. The "Enerpac strand jack" was used for loading utility, drilling, and process modules, providing a pulling force of 1,500 tons during the loading procedure. [Case Overview] ■ Client: Velard Transportation (Gulf of Mexico) ■ Product: Four HSL6500 strand jacks, 65kw hydraulic unit *For more details, please refer to the PDF document or feel free to contact us.
Design and manufacture of cylinders with hydraulic solenoid valves.
This is a product that uses a cartridge valve. 【Request】 We would like you to manufacture a solenoid valve for use with a forklift, assembled with a cylinder (provided by the customer). 【Proposal】 Based on the solenoid valves manufactured by our company, we designed a VE version that matches the specifications and proposed a compact and economical version, which was successfully adopted and appreciated. Since it is necessary to fill the valve and cylinder with oil before assembly, we created an assembly jig designed and manufactured in-house from the sequencer, leading to mass production. The hydraulic valves are managed with micron-level dimensional control, including air micro and digital micro, and are further inspected with hydraulic testing equipment, ensuring reliability. ● For other functions and details, please download the catalog.
Comprehensive catalog now available! Integrated filters and strainers for fluid equipment that achieve cost reduction.
The "High-Performance Filter & Strainer" is a filter integrated with fluid equipment, solving issues related to contamination and environmental impact in various fluid management systems, as well as challenges related to compactness. 【Features】 ◆ Cost reduction through integration of various components ◆ Compact equipment design ◆ Solutions for contamination issues and environmental impact 【For more details, please download the catalog or feel free to contact us】
![[Jung-A Hydraulic] Hydraulic Cylinder](https://image.mono.ipros.com/public/product/image/1ab/2000711690/IPROS5041377800246532219.png?w=280&h=280)
Hydraulic cylinder (construction machinery, agricultural machinery, commercial vehicles, industrial machinery)
[Business & Products] - Customized design to meet needs - Consistent quality, excellent cost performance - Export countries: Japan, USA, Europe - Abundant track record in Japan (Product examples: rock drills, forklifts, shovels, tractors, etc.) [Major Clients] Mitsubishi Heavy Industries, Furukawa, Kubota, MEC, Sunstream, Hitachi Zosen
![[Shin-Myong Hydraulic] Hydraulic Cylinder](https://image.mono.ipros.com/public/product/image/06c/2000711724/IPROS14978106463042396360.png?w=280&h=280)
Hydraulic cylinder (for agricultural use, industrial use, special vehicles)
[Business & Products] - Loaders, backhoes, harvesters, aerial work platforms, special purpose - Streamlined processes until shipment - Export to the United States, Japan, and Australia - Adherence to delivery dates and prompt response [Major Clients] KIOTI, IHI Agri Tech, Maruyama, Burder
![[CYSKO] Hydraulic Cylinder](https://image.mono.ipros.com/public/product/image/704/2001332291/IPROS2461879514293550697.jpg?w=280&h=280)
We can accommodate all types and standards, from standard types to mill types of cylinders, at low prices and high quality.
Hydraulic Cylinder At CYSKO, we mainly design, manufacture, and sell special hydraulic cylinders (large, long, with sensors, etc.). We can accommodate all types and standards, from standard types to mill-type cylinders, at low prices and high quality.
Ultra-high pressure 50MPa clamp cylinder
- This is a clamp cylinder that can be easily installed with just the processing of screw holes. - It enables space-saving design against large thrust. - Despite its small size, it features a spring return mechanism.
Shorten cycle time, reduce round-trip time.
From the forward limit to a certain stroke of the retreating travel, it operates with a large piston (large pulling force), and the remaining stroke operates with a small piston (small pulling force).
Hydraulic cylinders for industrial vehicles and machinery. We accommodate both custom and standard products.
We cater to a wide range of needs, from large cylinders and long lengths commonly used in construction machinery to custom-made products for specific applications and highly versatile standard products.
The Kyuro Filter is a vacuum cleaner for cleaning mobile coolant tanks.
The Kyuro Filter for grinding coolant filtration is compatible with any processing material. Sludge accumulates from the bottom, and the weight causes the filter element to extend. Rubber hoses are used on both the IN and OUT sides of the coolant, allowing for visual confirmation of changes in coolant cleanliness. Its simple structure enables one-touch replacement of the filter. Since the air in the factory serves as the power source, cleaning can be done for each tank. For more details, please contact us.
Introduction of hydraulic cylinders, hydraulic supply elements, and hydraulic vises for jigs.
We offer a variety of products as elements and systems for improving productivity, including "hydraulic cylinders" that use pipes in their housing, "universal cylinders" with a round housing, "screw-type cylinders" that screw directly into fixtures, "block cylinders" with rectangular bodies made of steel, aluminum, or bronze, and "hydraulic slides" that combine hydraulic cylinders with guide posts and front plates. For more details, please contact us or refer to our catalog.
Introduction of pipe coupling cylinders, universal cylinders, and more.
Rohmheld's hydraulic cylinders are cylinders for linear motion that operate using hydraulic power. We offer a lineup that includes pipe coupling cylinders, universal cylinders, threaded cylinders, block cylinders, hydraulic slides, and hollow piston cylinders. ■ Single-acting and double-acting Maximum operating pressure: 16 to 50 MPa Stroke: 4 to 1200 mm Piston diameter: 4 to 200 mm For more details, please contact us.
Large plate-shaped ferrite core for non-contact power supply applications.
Contactless power supply is expanding its applications from small-capacity devices like electric toothbrushes to automatic guided vehicles (AGVs) and electric vehicles (EVs) with the practical implementation of the new technology "electromagnetic resonance method." This technology requires ferrite cores, and with the expansion of applications and the need for larger capacities, there is a demand for materials that exhibit low loss and high magnetic flux density over a wide temperature range.
