We have compiled a list of manufacturers, distributors, product information, reference prices, and rankings for IP Transceiver.
ipros is IPROS GMS ・ IPROS One of the largest technical database sites in Japan that collects information on.

IP Transceiver Product List and Ranking from 44 Manufacturers, Suppliers and Companies

Last Updated： Aggregation Period:Sep 17, 2025～Oct 14, 2025
This ranking is based on the number of page views on our site.

IP Transceiver Manufacturer, Suppliers and Company Rankings

Last Updated： Aggregation Period:Sep 17, 2025～Oct 14, 2025
This ranking is based on the number of page views on our site.

  1. エクセリ Tokyo//IT/Telecommunications
  2. ファルタ・マイクロバッテリー・ジャパン Tokyo//Testing, Analysis and Measurement
  3. 東京通信機 Tokyo//IT/Telecommunications
  4. 4 ウェッジ Kyoto//IT/Telecommunications
  5. 4 テムコジャパン Tokyo//Industrial Electrical Equipment
Go to Company Ranking

IP Transceiver Product ranking

Last Updated： Aggregation Period:Sep 17, 2025～Oct 14, 2025
This ranking is based on the number of page views on our site.

  1. Introduction to the very famous battery manufacturer in Europe, VARTA. ファルタ・マイクロバッテリー・ジャパン
  2. Have you seen it? A very small lithium-ion rechargeable battery. ファルタ・マイクロバッテリー・ジャパン
  3. Bone conduction headset "HG70" テムコジャパン
  4. 4 Lightweight and compact professional earphone microphone SSM-514CSC エクセリ
  5. 5 Simultaneous call operation specific low-power wireless system AT-7000 東京通信機

IP Transceiver Product List

316～330 item / All 461 items

Displayed results
[BbTALKIN] CS2 Rental Set

[BbTALKIN] CS2 Rental Set

Rental set of Bluetooth intercom BbTALKIN CS2 that allows hands-free simultaneous calls for up to 6 people.

The 『BbTALKIN CS2』 is a Bluetooth intercom manufactured by ON'S COMPANY. ● It is a Bluetooth intercom that can be easily attached and detached from a helmet with one touch, allowing hands-free simultaneous communication for up to 6 people. ● The communication range varies depending on the location, but it can reach up to 1.6 km (when used with 2 units in an open field). ● It is particularly recommended for situations that require precise timing and rapid communication, such as heavy machinery, bridge construction, civil engineering, surveying, demolition work, construction sites, sewer and plumbing work, electrical and air conditioning work, high-pressure washing, and drones. ● It operates on the 2.4GHz Bluetooth band, so it can be used without affecting medical devices. ● For rentals, we provide a waterproof headset B199110a, waterproof case B199041, clip mount B199055, USB charging cable, and numbering stickers as basic rental components for free. ● When placed in the waterproof case, all components including the speaker, microphone, and main unit are completely waterproof (IPX8) and have excellent dustproof performance (IP6X) (IP68).

  • Other safety equipment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Mobile station vehicle-mounted antenna HMG-260-09EL

Mobile station vehicle-mounted antenna HMG-260-09EL

A capacity-grounded 3λ/4 whip antenna for use in municipal digital mobile communications and fire emergency digital mobile communications in the 260 MHz band.

The HMG-260-09EL (HMG26009EL) is a high-gain element (MP type) for vehicles manufactured by Nippon Antenna, designed for the 260MHz band. It is an antenna for mobile stations in digital public radio systems, used for municipal digital mobile communications and fire and emergency digital mobile communications. It is a capacitive grounded 3λ/4 whip antenna for the 260MHz band. * A whip antenna is one that has no directivity and can receive and transmit signals from any angle. * It is used in combination with a separately sold base. - When combined with base MG-BA3-MJ-2, it becomes a high-gain magnetic antenna for vehicles in the 260MHz band (5D-2V) HMG-260B-09 F=260-275 (set). - When combined with base MG-BA5-MJ-2, it also becomes a high-gain magnetic antenna for vehicles in the 260MHz band (5D-2V) HMG-260B-09 F=260-275 (set). * The compatible frequency range is 260 to 275MHz. * The connector is MP. * Included accessories: Instruction manual. * For more details, please feel free to contact our company.

  • Other network tools

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Antenna for 150MHz band radio equipment WH-150-3HA-09

Antenna for 150MHz band radio equipment WH-150-3HA-09

Antenna for a 150MHz band radio device with hole-mount installation.

The WH-150-3HA-09 (WH1503HA09) is a rooftop whip antenna (hole-mount type) manufactured by Nippon Antenna for the 150MHz band. It is an antenna for radios operating in the 150MHz band. The element is bent, with a 65-degree angle in the middle of the element. It is a whip antenna that is mounted by drilling a hole, suitable for a vehicle body mounting hole of φ23mm and a mounting plate thickness of 15mm or less. The installation location is on the vehicle's rooftop. *A whip antenna is one that has no directivity and can receive and transmit signals from any angle. It features an NJ connector. It is designed for a specified frequency within the 150MHz range; please specify the center frequency (fo) in MHz when placing your order. This product complies with safety standards. It is made to order; please inquire about the delivery time. Included accessories: one instruction manual. There are also straight NJ connector versions of WH-150-3H-09 with a straight element and WH-150-2H-09 with an L-shaped NJ connector. *For more details, please feel free to contact us.

  • Other network tools

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Antenna for 150MHz band radio equipment WH-150-3H-09

Antenna for 150MHz band radio equipment WH-150-3H-09

Antenna for a 150MHz band radio device with hole-mounting installation.

The WH-150-3H-09 (WH1503H09) is a whip antenna (hole-mount type) for rooftop use in the 150MHz band, manufactured by Nippon Antenna. It is an antenna for radios operating in the 150MHz band. This is a whip antenna that is mounted by drilling a hole. The mounting hole on the vehicle is φ23mm, and the thickness of the mounting plate is 15mm or less. The installation location is the car's rooftop. * A whip antenna is one that has no directionality and can receive and transmit signals from any angle. It uses an NJ connector. It is for a specified frequency within the 150MHz band. Please specify the fo (center frequency) in MHz when placing your order. This product complies with safety standards. It is made to order. Please inquire about the delivery time. Included: One instruction manual. There are also models available with a straight NJ connector bent at a 60-degree angle (WH-150-3HA-09) and an L-shaped NJ connector (WH-150-2H-09). * For more details, please feel free to contact us.

  • Other network tools

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
[Designated frequency in the 150MHz band] HGW-150-1PN-09

[Designated frequency in the 150MHz band] HGW-150-1PN-09

150MHz band λ/2 non-radial type antenna with N-P type connector specifications

●HGW-150-1PN-09 (HGW1501PN09) is a 150MHz 1/2λ element (NP type) manufactured by Nippon Antenna. ●It is a λ/2 non-radial type antenna for radio equipment in the 150MHz band. ●Please use it in combination with the separately sold NJ type base for installation. ●Since it is a specified frequency in the 150MHz band, please specify the fo (center frequency) MHz when placing an order. ●The model number changes based on the frequency. - HGW-150-1PN-09 140-143: Frequency 140-143MHz - HGW-150-1PN-09 143-146: Frequency 143-146MHz - HGW-150-1PN-09 146-150: Frequency 146-150MHz - HGW-150-1PN-09 150-155: Frequency 150-155MHz - HGW-150-1PN-09 155-160: Frequency 155-160MHz - HGW-150-1PN-09 160-165: Frequency 160-165MHz - HGW-150-1PN-09 165-170: Frequency 165-170MHz *For more details, please feel free to contact us.

  • Other network tools

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Designated frequency in the 150 MHz band: HGB-150-2-09EL

Designated frequency in the 150 MHz band: HGB-150-2-09EL

Garter-mounted 150MHz band vehicle high-gain element.

The HGB-150-2-09EL is a 150MHz band vehicle-mounted high-gain element (MP type) manufactured by Japan Antenna. It is an antenna for vehicle-mounted radios. It is an element of a 150MHz band 5λ/8 whip antenna with a garter mount. Since the HGB-150-2-09EL is a specified frequency in the 150MHz band, please specify the fo (center frequency) in MHz when placing your order. Due to the fixed frequency of the HGB-150-2-09EL, there are also products with the following model numbers. These are not made to order. - HGB-150-2-09EL 150-153: Frequency 150-153MHz - HGB-150-2-09EL 153-156: Frequency 153-156MHz - HGB-150-2-09EL 156-160: Frequency 156-160MHz There are also sets available, such as HGB-150-2A-09, which includes the HGB-150-2-09EL and RSB-BA3-MJ, and HGB-150-2B-09, which includes the HGB-150-2-09EL and RSB-BA5-MJ. *For more details, please feel free to contact us.

  • Other network tools

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
[No license or qualifications required] Wideband handheld receiver IC-R15

[No license or qualifications required] Wideband handheld receiver IC-R15

A wideband handheld receiver that does not require a license or qualifications, is highly versatile, and can be easily used by beginners.

● The IC-R15 is a wideband handheld receiver made by Icom. ● It covers a wide frequency range from 108 to 500 MHz. ● It features an easy mode for beginners, allowing users to simply select registered reception targets categorized in advance to listen. Additionally, it has a favorites function that enables quicker selection of frequently listened memory channels. ● It can receive and record two signals simultaneously, allowing for the collection of more information. ● Recorded audio can be saved as WAV files on a microSD card, enabling data playback at any time without the worry of missing anything. Furthermore, it can record while audio is being played back, and information such as frequency, mode, S-meter, and time (user-set) can also be recorded along with the audio. ● It is equipped with Bluetooth functionality, allowing the use of devices like VS-3 and S9 IJKP. ● The scan speed is approximately 150 channels per second (in VFO mode). *For more details, please refer to the PDF document or feel free to contact us.*

  • Other safety equipment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
[New Wave Support] Hybrid IP Transceiver IP700 PLUS

[New Wave Support] Hybrid IP Transceiver IP700 PLUS

A hybrid IP transceiver that combines an IP transceiver usable nationwide in Japan within mobile phone call areas and a digital simple radio.

● The IP700 PLUS is a hybrid IP transceiver manufactured by Icom. ● The IP700 PLUS is compatible with the new wave. It increases the existing digital simple radio registered station (3R) from 30 channels to 82 channels by adding 52 channels for the new wave. The existing air channels increase from 5 channels to 15 channels by adding 10 channels for the new wave. *Note: Air channels are receive-only. The existing digital simple radio licensed station (3B) increases from 65 channels to 95 channels by adding 30 channels for the new wave (3C/3D). *Note: 20 channels for relay (3D) are planned to be supported. ● It has two functions: LTE communication via IP and direct communication via digital simple radio, allowing for communication even when out of mobile phone network coverage or during LTE line troubles. ● Normally, it switches between LTE mode for communication with IP radios and DCR mode for communication with digital simple radios. ● In LTE mode, simultaneous calls can be made without a limit on the number of participants. In DUAL mode, only alternating calls are possible. *For more details, please refer to the PDF document or feel free to contact us.

  • Other safety equipment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
[New Wave Support] Digital Simple Radio License Station IC-DU75 PLUS

[New Wave Support] Digital Simple Radio License Station IC-DU75 PLUS

Digital simple radio licensed station with GPS location information and Bluetooth communication support, increased to 30 channels for digital simple radio registered stations (3C/3D).

The IC-DU75 PLUS is a new wave-compatible digital simple radio licensed station manufactured by Icom. The differences from the IC-DU75 are as follows: It increases the existing digital simple radio licensed station (3B) 65 channels by adding 30 channels for the new wave-compatible digital simple radio registered station (3C/3D), bringing the total to 95 channels. *The relay (3D) 20 channels are planned to be supported. *There are no changes to functions or performance other than for the new wave. It is equipped with a Bluetooth unit. It has GPS functionality that can be transmitted to the other station. It features a sub-channel PTT function that allows for sending and receiving across up to 3 channels without the need to switch channels. It has ruggedness that meets the U.S. Department of Defense procurement standards (MIL-STD-810G) tests. It has dust and water resistance ratings of IP67/66/55/54, making it safe to use in rain and sandy conditions. It is equipped with a loudspeaker of 800mW that is easy to hear even in noisy environments. The antenna connector on the radio side is SMA-J. The manufacturer offers a free warranty period of 3 years. *For more details, please refer to the PDF document or feel free to contact us.

  • Other safety equipment
  • Other network tools

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
[No license or qualifications required] Relay device for specific low-power transceivers FC-R3

[No license or qualifications required] Relay device for specific low-power transceivers FC-R3

A relay device for specific low-power transceivers that can be powered ON/OFF and reset with an infrared remote control, and can be installed indoors and outdoors due to its waterproof performance of IPX7.

● The FC-R3 is a relay device for specific low-power transceivers manufactured by FRC Corporation. ● It has relay functionality for specific low-power transceivers, theoretically doubling the communication area. ● It is a recommended relay device when using the B-EAR BRIDGECOM R2 Field Receiver with the transmitter set to the specific low-power transceiver FC-ZXPRO. ● It uses a half-duplex method with two frequencies: a receiving frequency of 421 MHz and a transmitting frequency of 440 MHz. ● It supports 18 business channels (1ch to 18ch) and 9 leisure channels (19ch to 27ch), for a total of 27 channels. ● It has a 38-group mode. ● SQL (squelch) sensitivity can be set to five levels. ● The settings and control of the relay device can be done using the included infrared remote control. ● It has a strong waterproof rating of IPX7. ● It features a robust body case made of aluminum die-cast. ● It operates on household power AC100V using the included AC adapter FC-R3AC. ● It has an all-reset function that allows all settings to be returned to the initial factory state with simple operation. *For more details, please refer to the PDF document or feel free to contact us.*

  • Other network tools

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
IPX4 Splash-proof Ear-hook Type Professional Headset Microphone EME-914MA

IPX4 Splash-proof Ear-hook Type Professional Headset Microphone EME-914MA

IPX4 splash-proof, ear-hook type professional earphone microphone compatible with all Alinco transceivers using a 4-pole screw-in plug.

The EME-914MA (EME914MA) is a splash-proof, ear-hook type professional headset microphone made by Alinco (ALINCO) with an IPX4 rating. It can be used with various Alinco 4-pole screw-type plug radios. This is a professional-grade headset microphone. The microphone part is water-resistant for everyday use with an IPX4 rating, which helps prevent water ingress from the switch area. The headset features an ear-hook design with large ear caps, making it less likely to cause ear pain even during prolonged use, and the cable is a durable twisted cord. The headset connection connector is φ2.5mm. The microphone comes with a windscreen to reduce wind noise. There is a rotating clip on the back of the microphone part that allows it to be attached to the chest. The PTT has a locking function. There is no microphone gain switch. Individual parts can also be purchased: - Twisted cable headset: EZ0041 - Ear pads (black): 5-piece set AD012 / 20-piece set AD013 - Microphone windscreen (with windscreen and plastic parts for fixing): FG0898 For more details, please feel free to contact our company.

  • Other network tools

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
260MHz Band Wideband 5-Element Yagi Antenna 5BD-2502

260MHz Band Wideband 5-Element Yagi Antenna 5BD-2502

The arm, element, and bracket are made of stainless steel, making it a high-strength wideband 5-element Yagi antenna for municipal digital mobile communication system fixed stations.

The 5BD-2502 (5BD2502) is a wideband 5-element Yagi antenna manufactured by Nippon Antenna, designed for the 260 MHz band. *The Yagi antenna consists of three rods of different lengths that form a single antenna, with the shorter rod serving as a director, the middle rod as a driven element, and the longest rod as a reflector, resulting in a highly directional antenna. It was invented in 1926. *This is a wideband 5-element Yagi antenna for fixed stations in municipal digital mobile communication systems. *The operating frequency range is 260 to 275 MHz. *When placing an order, please specify ft (transmission frequency, MHz) and fr (reception frequency, MHz). *The arms, elements, and brackets are made of stainless steel, providing excellent weather resistance and strength. *The feed point is highly waterproof, ensuring stable performance. *The recommended antenna mounting bracket is C-30. *It comes with an NJ connector, which can be connected if the connector on the radio side is NP. For extremely low-priced sales of earphone microphones and batteries, please leave it to Excelli. *For more details, please feel free to contact us.

  • Other network tools

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Cover-equipped wideband 5-element Yagi antenna 5BD-930A

Cover-equipped wideband 5-element Yagi antenna 5BD-930A

Cover-type wideband 5-element Yagi antenna compatible with the new frequency band of 850MHz to 940MHz.

The 5BD-930A is a cover-equipped wideband 5-element Yagi antenna manufactured by Japan Antenna. *The Yagi antenna is a type of antenna consisting of three rods of different lengths that form a single antenna, with the shorter rod serving as a director, the radiating element, and the reflector, making it a highly directional antenna. It was invented in 1926. *The supported frequency range is 850MHz to 940MHz. This antenna is compatible with the new frequency band of MCA after the MCA frequency transition. *The antenna part is fully covered, making it resistant to rain and wind, and it has excellent weather resistance. *As this is a directional antenna that only receives radio waves from a specific direction, please install it according to the direction of the incoming radio waves. *It has a high gain of 10.15dBi. *Please use it in combination with the separately sold MCA Advance connection cable (24m) 5D2V-NP-SMAP-24. *Note: When using outdoors, please waterproof the connector part with tape or similar methods. *The terminal shape is N-J type. For extremely low-priced sales of earphone microphones and batteries, please leave it to Excelli. *For more details, please feel free to contact us.

  • Other network tools

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
3-element Yagi antenna 3BD-930 (18MSMA-P) set

3-element Yagi antenna 3BD-930 (18MSMA-P) set

SMAP type 3-element for MCA system advance that can be used for transmission and reception corresponding to 850MHz to 945MHz.

The 3BD-930 (18MSMA-P) set is a 3-element MCA Advance SMAP type antenna manufactured by Nippon Antenna. It is a set product that includes the wideband 3-element Yagi antenna (without cover) 3BD-930 and the connection cable for MCA Advance (18m) 5D2V-NP-SMAP-18. Please be sure to connect the included cable 5D2V-NP-SMAP-18 for use. This is a 3-element Yagi antenna mainly used for transmission and reception with MCA Advance. It supports frequencies from 850MHz to 945MHz. The internal part of the feeding section is completely sealed and waterproof. This antenna is a single-directional Yagi antenna with wideband radiating elements, reflecting elements, and guiding elements, offering high gain and sharp directivity. Included accessories: - Feeding cable (30cm) ×1 - Connection cable for MCA Advance (18m) 5D2V-NP-SMAP-18 ×1. For extremely low-priced sales of earphone microphones and batteries, please leave it to Excelli. For more details, please feel free to contact us.

  • Other network tools

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
[Mobile Station Vehicle-Mounted Magnet Type Base] MG-BA5-09(7M)

[Mobile Station Vehicle-Mounted Magnet Type Base] MG-BA5-09(7M)

Mobile station vehicle-mounted magnetic type base (5D-2V 7m) made by Nippon Antenna.

● The MG-BA5-09(7M) is a magnet-type base station for mobile units manufactured by Nippon Antenna. ● It is an antenna base for vehicle-mounted radios. ● It can be used by combining it with separately sold antenna elements and installing the base on the vehicle's rooftop or similar locations using the included strong magnet. ● The antenna part of the base has a screw-type connector. The antenna element can be attached by turning it clockwise. ● Please use it in combination with separately sold capacity installation type 3/4λ whip antennas HMG-450-1-09EL, HMG-450-3B-09, vehicle-mounted antenna element EL480 for the 148-157 MHz band, and vehicle-mounted element EL458 for the 150 MHz band. ● The radio connection side has an attachment connector, and you can choose from the following connectors according to the radio used: - M-P connector M・P-TA2 - N-P connector N・P-TA - BNC-P connector BNC・P-TA - TNC-P connector TNC・P-TA For extremely low-priced sales of earphone microphones and batteries, please leave it to Excelli. * For more details, please feel free to contact us.

  • Other network tools

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
COPYRIGHT © 2001-2025 IPROS CORPORATION ALL RIGHTS RESERVED.