Infrared Sensor Product List and Ranking from 14 Manufacturers, Suppliers and Companies

Infrared sensor Near-infrared beam interruption type PH-600SE

Outdoor long-range infrared sensor ideal for perimeter security of vast areas.

■External Environment Diagnosis Function By connecting the optional S.E.C circuit board (sold separately) to the receiver, environmental conditions can be checked separately from intrusion alerts. If the infrared light reception falls below a certain level due to bad weather, it will notify the receiving unit of the environmental deterioration. ■Malfunction Prevention Circuit A full safety system that mitigates the effects of heat haze, atmospheric fluctuations, temperature changes, and lighting ensures safe operation at all times. ■Powerful Beam Essential for Outdoor Security To accommodate attenuation from external light and adverse weather conditions such as rain, snow, and fog, the distance margin is set to more than ten times the warning distance. ■Easy and Reliable Optical Axis Adjustment With the built-in aiming device and the included sensitivity checker, optical axis adjustment can be performed easily and reliably. (The PH-600SE is equipped with a rifle scope to enhance adjustment accuracy.) Additionally, it features a monitor jack for checking sensitivity levels with the optional (sold separately) level checker "EL-01." ■Outstanding Durability and Environmental Resistance The double drip-proof structure and stainless steel plate provide exceptional durability and environmental resistance. ■Flexible Security Network Setup By synchronizing infrared signals, mutual interference is eliminated, allowing for a flexible security network setup.

Company：セキュリティハウス
Price：Other

Other security and surveillance systems
Infrared Sensor

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Housing storage type infrared sensor PXB-50HF-KH

Evolved high-function PXB series housing storage type.

■Housing Storage Type This is a dedicated product for housing cases, so it can be directly mounted onto the case. *Installing it directly outdoors may cause malfunctions. ■Significantly Reduced Malfunctions (Dual Modulation Method, Wide Pitch) By adopting our unique dual modulation method for the infrared beam, we enhance the ability to distinguish between ambient light (such as sunlight and car headlights) and achieve reliable outdoor monitoring. (It is not affected by changes in illumination of up to 50,000 lux.) Additionally, by widening the beam pitch compared to the conventional PB-F/HF series, we significantly reduce malfunctions caused by small animals like birds, resulting in even more stable operation. ■Easy-to-See Aiming Mechanism (Double Ring Aiming Mechanism) [Patent] The aiming device employs a double ring to improve visibility during optical axis adjustments. It provides appropriate visibility when the eye is brought close or moved away. ■Strong Against Lightning (Enhanced Lightning Protection) To reduce damage from induced lightning, we have strengthened the surge resistance performance. It has approximately 10 times the surge resistance compared to the conventional PB-IN-HF series, allowing for safe use. (Compared to our previous models)

Company：セキュリティハウス
Price：Other

Other security and surveillance systems
Infrared Sensor

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

(Manufacturing thermal camera modules in-house) SSC Corporation

We take care of the thermal camera module! Since we develop and manufacture it in-house, we can accommodate custom requests.

SSC Corporation is a company that primarily provides non-contact thermometers. It receives infrared signals with sensors, enabling temperature measurements in a very short time. Since it is non-contact, measurements can be taken regardless of the distance between the thermometer and the subject being measured, expanding its application range into various fields, including safety and environmental sectors. We strive daily to ensure that many people can use our products conveniently and with peace of mind. If you are considering measurement, analysis, or management using infrared sensors, please feel free to consult us. We are also the sole domestic agent for Germany's Heiman Sensor Company. 【Product Line】 ■ Thermopile-type infrared sensors ■ Sensor application products (temperature sensors, carbon dioxide sensors) ■ Development, design, manufacturing, and sales of electronic measuring instruments using various sensors *For more details, please refer to our catalog or feel free to contact us.

Company：エスエスシー
Price：Other

Sensors
Infrared Sensor

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Vehicle speed monitoring infrared sensor

Easy installation on a single pipe; easy to set up with a digital timer.

Prevent accidents on site. It is a safety system using infrared sensors and direction detectors. It monitors vehicle speed, and vehicles exceeding the speed limit are warned with a patrol light.

Company：東京通信機
Price：Other

Other measurement, recording and measuring instruments
Rental/lease
Other safety equipment
Infrared Sensor

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Automatic door infrared sensor / doorway monitoring, no installation required HA-430

A design that suppresses protrusions and minimizes presence! An automatic door sensor that enables safe and comfortable passage even with tall doors.

The "HA-430" is an infrared sensor designed to be installed under automatic doors. Its design minimizes protrusion and presence, allowing for an ideal entrance that feels open. It supports installation up to 4.0 meters for the under-mount type, maintaining a stable high-density area of 60 spots even with tall doors. Additionally, it allows for adjustments in width and depth by one row each, enabling precise detection ranges tailored to the site while maintaining high density. It also features a doorway monitoring function, making it suitable for entrances in industrial facilities. For more details, please contact us or download the catalog.

Company：ホトロン
Price：Other

Sensors
switch
Sensors
Infrared Sensor

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Explosion-proof infrared sensor PXH-200EXL

Infrared sensors that can be used in hazardous locations such as oil refineries, oil storage facilities, gas holders, and chemical factories.

■This is a high-performance outdoor long-range infrared sensor that combines intrinsic safety explosion-proof structure and pressure-resistant explosion-proof structure. ■High-performance explosion-proof sensor with a wide range of applications This product is an explosion-proof infrared sensor that complies with the "Explosion Protection Guidelines for Factory Electrical Equipment (Gas Vapor Explosion 2006)" by the Japan Industrial Safety and Health Association. It features an explosion-proof structure of 'iad2G4' that combines "intrinsic safety explosion-proof (ia)" and "pressure-resistant explosion-proof (d)", making it suitable for use in Class I and Class II hazardous locations. It has a wide application range for target gases, covering explosion grades 1 to 2 and ignition grades G1 to G4, accommodating most explosive gases. ■Dual modulation method By adopting our unique dual modulation method for the infrared beam, we enhance the distinguishability from stray light (such as sunlight and car headlights), achieving highly reliable outdoor surveillance. ■Two types: "L" type and "H" type To prevent mutual interference, we offer two types with different frequencies: "L" type and "H" type, allowing for multi-stage surveillance and long-distance linear span monitoring. ■Equipped with a light reception sensitivity indicator The light reception sensitivity indicator allows for easy adjustment of the optical axis.

Company：セキュリティハウス
Price：Other

Other security and surveillance systems
Infrared Sensor

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Explosion-proof infrared sensor PXH-400EXH

Infrared sensors that can be used in hazardous locations such as oil refineries, oil storage facilities, gas holders, and chemical plants.

This is a high-performance outdoor long-range infrared sensor that combines intrinsic safety explosion-proof construction and pressure-resistant explosion-proof construction. ■ High-performance explosion-proof sensor with a wide application range This product is an explosion-proof infrared sensor that complies with the "Guidelines for Explosion Protection of Electrical Equipment in Factories (Gas and Vapor Explosion Protection 2006)" by the Japan Industrial Safety and Health Association. It features an explosion-proof structure of 'iad2G4' that combines "intrinsic safety explosion-proof (ia)" and "pressure-resistant explosion-proof (d)", making it suitable for use in Class I and Class II hazardous locations. It has a wide application range for target gases, covering explosion grades 1 to 2 and ignition grades G1 to G4, accommodating most explosive gases. ■ Dual modulation method By adopting our unique dual modulation method for the infrared beam, we enhance the distinguishability from stray light (such as sunlight and car headlights), achieving reliable outdoor surveillance. ■ Two types: "L" type and "H" type To prevent mutual interference, we offer two types with different frequencies: "L" type and "H" type, allowing for multi-stage surveillance and long-distance linear span monitoring. ■ Equipped with a light reception sensitivity indicator The light reception sensitivity indicator allows for easy adjustment of the optical axis.

Company：セキュリティハウス
Price：Other

Other security and surveillance systems
Infrared Sensor

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Passive Sensor Surface Surveillance Type PA-6820WA

Wide-base passive sensor with built-in anti-blind function.

■Anti-Blind Function This function detects interference applied to the front of the sensor. If an obstruction is attached to the front, it will issue a warning through a trouble alarm output and the illumination of the trouble indicator light. Once the obstruction or prank is removed, the output will stop, but if a trouble alarm has been triggered, please immediately check the operation of the sensor. ● As a warm-up, the trouble alarm will not be output for about 2 seconds after power is turned on. * Transparent sprays or items with low near-infrared reflectivity may not be detectable. ■Wide Base Design ● By widening the base (Φ150mm), the issue of noticeable dirt marks on the ceiling surface during sensor replacement is resolved. ■Auto Reset Memory Function When multiple sensors are connected, it is possible to confirm which sensor triggered the alarm through the flashing and illumination of the memory indicator light (yellow) during the alert state. ● The memory indicator light will flash for 3 minutes after the alarm is triggered, then continue to illuminate for 47 minutes before automatically turning off. ● This function can be disabled via the mode selector.

Company：セキュリティハウス
Price：Other

Other security and surveillance systems
Infrared Sensor

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Passive Sensor PA-6810B(BL)

Basic sensors with energy-saving and compact design!! The black (BL) version is now available for all models.

■Energy-saving Design 1 (Low Current Consumption) Reduces current consumption to about one-third (8mA) compared to our conventional products. Allows the use of smaller power supplies, leading to cost reductions. ■Energy-saving Design 2 (Low Voltage) Operating voltage is DC 7–30V. Enables the selection of wiring materials and long-distance wiring without much concern for voltage drop due to wiring resistance. Suitable for renewals as well. ■Black Color Available for All Warning Models We have introduced a black version that considers harmony with ceilings in temples, museums, art galleries, and stores. This allows the sensor to blend into the background and remain inconspicuous (does not compromise aesthetics). Additionally, the visibility and sensitivity of the LED are equivalent to the white models. ■Unique Warning Area Configuration Our unique optical technology creates a sharp warning area, providing effective detection performance regardless of area settings, using a movable mirror. ■Improved Installation and Maintenance We have adopted a snap-in method for attaching and detaching the sensor unit and base unit, allowing for one-touch operation and smooth work.

Company：セキュリティハウス
Price：Other

Other security and surveillance systems
Infrared Sensor

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Passive Sensor Surface Surveillance Type for 30m PA-8030

Passive sensors that intelligently control various functions.

■Optimal for use under specific installation conditions Even when phenomena that are likely to cause malfunctions occur, such as small animals (mice, dogs, cats), stray light, drafts, and external noise, the dual twin effect ensures minimal impact. ■SC (Automatic Sensitivity Adjustment) Circuit Equipped with an ASC circuit that automatically sets the appropriate sensitivity based on the balance between room temperature and the intruder's body temperature. ■Reliable design resistant to radio interference By adopting a unique N.E. (Noise Eliminator) in circuit and mechanical design, effective measures against electrical noise entering from the line and noise propagating through the air are implemented. ■Alarm Memory Function By adding control contacts outside the sensor, it is possible to confirm the activated sensor through the illumination of a display light. ■Alarm Indicator Light Control By adding control contacts outside the sensor, the ON/OFF of the indicator light can be remotely operated. *It can also be controlled by a switch inside the sensor. ■Trustworthy and user-friendly design ● Low power consumption of 15mA when using DC12V. ● Equipped with a targeting area adjustment function that allows visual confirmation of the area.

Company：セキュリティハウス
Price：Other

Other security and surveillance systems
Infrared Sensor

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Ultra-compact infrared sensor Near-infrared type (opposite type) PB-6Sb

A super compact infrared sensor with a miniaturized amplifier section and freely detachable connection cable.

■Ideal for security at CD and ATM corners, windows, and corridors The PB-6Sa/6Sb is an ultra-compact opposing infrared sensor with a separated amplifier section, and since the exposed part is only the sensor head (diameter 15mm), security for CD and ATM machines can be conducted discreetly. It can also be used for a wide range of applications such as detecting passing objects at windows, corridors, and doors, as well as for integration into HA devices. ■Realization of compact amplifier section The amplifier section has been miniaturized to W:45mm H:94mm D:29mm. Additionally, the volume has been reduced by 40% (compared to our conventional products), allowing for flexible installation locations. ■Cuttable connection cables Depending on the installation location, both the transmitter and receiver connection cables can be cut to the required length, eliminating the need to bundle them near the amplifier section and allowing for neat wiring. ■User-friendly design ● The sensor head can be easily installed using a one-touch mounting method by simply drilling a 12mm hole and pushing it in. ● It features a built-in sensitivity adjustment volume that allows for optimal sensitivity adjustment according to the installation distance.

Company：セキュリティハウス
Price：Other

Other security and surveillance systems
Infrared Sensor

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Infrared Sensor Near-Infrared Type (Direct Reflection Type) Indoor 1m Use PR-1B

Direct reflection type infrared sensor capable of motion detection.

■Direct Reflection Type Without Reflector Since it adopts a direct reflection method, a reflector is not required. ■Convenient Sensitivity Adjustment Volume Equipped with a sensitivity adjustment volume that allows you to adjust sensitivity according to the installation location. (It is set at the factory to detect a human body at 1 meter.) ■Wide Range of Applications It can accommodate a wide range of applications that require stationary detection. ■Easy Installation This is a reflection-type sensor with an integrated light-emitting and light-receiving unit, so installation and wiring can be done with just the main unit. ■User-Friendly Design ● It has a thin and compact size of 23.5mm in thickness. ● It has terminal connections, making wiring connections easy. ● It can be used as an embedded type by using an embedded plate (BP-5B, BP-5D: sold separately). ● Using L brackets (BL-5: sold separately) further expands its applications. ■Cautions for Using This Sensor Please note that this sensor may not detect the following types of objects due to its operating principle: ● Objects with a shiny surface close to a mirror finish. ● Objects with an extremely low light reflectance. 【Examples】 Clothing made of black wool, black shiny suits or scarves, leather products, laser-coated items.

Company：セキュリティハウス
Price：Other

Other security and surveillance systems
Infrared Sensor

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Infrared Sensor PXB-60TE

The dual-beam opposing infrared sensor has evolved into a new era! An infrared sensor packed with patented technology creates safety and trust!

■Strong against stray light (Dual modulation method) Our unique dual modulation method and photoelectric conversion circuit [patented technology] enhance the ability to distinguish between stray light (such as sunlight and car headlights), achieving highly reliable outdoor surveillance. ■Strong in harsh environments (2-stage high-power beam) By adopting a high-power beam with 100 times sensitivity margin and 10 times distance margin, we reduce malfunctions during adverse weather conditions such as fog, snow, and heavy rain. ■Energy-saving design (low current consumption) Compared to conventional products (PB-TE series), current consumption is reduced by over 40%. It can be supported by a smaller power supply than before. ■Green design (compliant with RoHS directive) It complies with the environmentally friendly RoHS directive. (Eliminates lead, mercury, cadmium, hexavalent chromium, polybrominated biphenyls, polybrominated diphenyl ethers, bisphthalates, butyl benzyl phthalate, dibutyl phthalate, and diisobutyl phthalate.) ■Structure resistant to insect intrusion (insect-proof and drip-proof design) With insect-proof bushings that envelop the wires and a waterproof structure, we achieve dustproof, drip-proof, and insect-proof measures equivalent to IP55. The structure is designed to be less susceptible to insects and water (compared to our conventional products).

Company：セキュリティハウス
Price：Other

Other security and surveillance systems
Infrared Sensor

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Infrared sensor Near-infrared beam interruption type PXB-100HFA

The highest quality infrared sensor that connects stability and trust, compatible with environmental and eco-friendly needs. The pole cover that came with the PXB-HF has been removed.

■Dual Modulation Method By adopting our unique dual modulation method for the infrared beam, we enhance the ability to distinguish between ambient light (such as sunlight and car headlights) and achieve highly reliable outdoor surveillance. (It is not affected by changes in illumination of up to 50,000 lux.) ■Four-Stage High-Power Beam By employing a four-stage high-power beam with a sensitivity margin of 100 times and a distance margin of 10 times, we reduce the risk of malfunction in adverse weather conditions such as fog, snow, and heavy rain. ■Wide Pitch By expanding the vertical and horizontal dimensions of the beam compared to conventional models, and in conjunction with the four-stage beam simultaneous blocking method, we significantly reduce malfunctions caused by birds and fallen leaves. ■Energy-Saving Design We have significantly reduced the current consumption. (Less than 50% compared to our previous models) This allows for the use of a smaller power supply than before, eliminating the need for thick wiring even for long-distance connections, thereby greatly reducing wiring material costs. ■Green Design We comply with the environmentally conscious RoHS directive. (We eliminate lead, mercury, cadmium, hexavalent chromium, polybrominated biphenyls, and polybrominated diphenyl ethers.) *RoHS: A directive established by EU member states that restricts the use of specific hazardous substances in electrical and electronic equipment.

Company：セキュリティハウス
Price：Other

Other security and surveillance systems
Infrared Sensor

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Infrared Sensor Near Infrared Beam Blocking Method PXB-200HFA

The highest quality infrared sensor connecting stability and trust, compatible with environmental and eco-friendly standards. The pole cover that came with the PXB-HF has been removed.

■Dual Modulation Method By adopting our unique dual modulation method for the infrared beam, we enhance the distinguishability from ambient light (such as sunlight and car headlights), achieving highly reliable outdoor surveillance. (It is not affected by changes in illumination of up to 50,000 lux.) ■Four-Stage High-Power Beam By employing a four-stage high-power beam with 100 times sensitivity margin and 10 times distance margin, we reduce false triggering in adverse environmental conditions such as fog, snow, and heavy rain. ■Wide Pitch By expanding the vertical and horizontal dimensions of the beam compared to conventional models, and in conjunction with the four-stage beam simultaneous blocking method, we significantly reduce false triggering caused by birds and fallen leaves. ■Energy-Saving Design We have significantly reduced the current consumption (to less than 50% of our previous models). This allows for the use of a smaller power supply than before, eliminating the need for thick wiring even in long-distance installations, thereby greatly reducing wiring material costs. ■Green Design We comply with the RoHS directive, which considers environmental impact. (We eliminate lead, mercury, cadmium, hexavalent chromium, polybrominated biphenyls, and polybrominated diphenyl ethers.) *RoHS: A directive established by EU member states that restricts the use of specific hazardous substances in electrical and electronic equipment.

Company：セキュリティハウス
Price：Other

Other security and surveillance systems
Infrared Sensor

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Infrared sensor, near-infrared beam interruption type, PXB-50F

With evolved performance and workability, connecting safety and trust: 4-stage high-power beam infrared sensor.

■Strong against lightning (Enhanced lightning protection) To reduce damage from induced lightning, surge resistance performance has been strengthened. *This does not guarantee protection against failures or malfunctions caused by lightning strikes. ■Structure that prevents entry of ants and other pests (Insect and drip-proof design) By using insect-proof bushings that envelop the wires and dedicated gaskets, we achieve high dust, drip, and insect protection (equivalent to IP65). The insect-proof bushing can be cut to fit the size of the wire, preventing the entry of insects and water through the wire entry point and protecting the circuit board from corrosion. ■Energy-saving design (Reduced power consumption) Power consumption has been significantly reduced (to less than 50% compared to our conventional models). This allows for the use of smaller power supplies than before, eliminating the need for thick wiring even over long distances, which greatly reduces wiring material costs. ■Strong against ambient light (Dual modulation method) By adopting our unique dual modulation method for the infrared beam, we enhance the ability to distinguish between ambient light (such as sunlight and car headlights) and achieve reliable outdoor monitoring. ■Improved pole mounting (Back-to-back mounting) The adoption of a new pole mounting bracket has improved the workability when mounting back-to-back on a pole.

Company：セキュリティハウス
Price：Other

Other security and surveillance systems
Infrared Sensor

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Housing storage type infrared sensor PXB-100HF-KH

Evolved high-function PXB series housing storage type

■Housing Storage Type This is a dedicated product for housing cases, so it can be directly mounted onto the case. *Installing it directly outdoors may cause malfunctions. ■Significantly Reduced Malfunctions (Dual Modulation Method, Wide Pitch) By adopting our unique dual modulation method for the infrared beam, we enhance the distinguishability from stray light (such as sunlight and car headlights), achieving reliable outdoor surveillance. (It is not affected by changes in illumination of up to 50,000 lux.) Additionally, by widening the beam pitch compared to the conventional PB-F/HF series, we significantly reduce malfunctions caused by small animals like birds, resulting in even more stable operation. ■Easy-to-See Aiming Mechanism (Double Ring Aiming Mechanism) [Patent] The aiming device employs a double ring to improve visibility during optical axis adjustment. It provides an appropriate view when the eye is brought close or moved away. ■Strong Against Lightning (Enhanced Lightning Protection) To reduce damage from induced lightning, we have strengthened the surge resistance performance. It has approximately 10 times the surge resistance compared to the conventional PB-IN-HF series, allowing for safe use. (Compared to our previous models)

Company：セキュリティハウス
Price：Other

Other security and surveillance systems
Infrared Sensor

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Low power consumption infrared sensor PXB-100SW

Low power consumption and capable of wireless operation, 4-stage high-power beam infrared sensor.

■Solar Power Compatible By combining the floodlight with a separately sold solar power unit, it can be used with single-sided wiring only on the receiver side, even in locations where dual-sided wiring is difficult. Additionally, by adding a solar power unit and a contact input unit to the receiver side, it can support full wireless operation. Therefore, it is possible to maintain surveillance up to 100 meters even in locations where wiring work is challenging. ■Strong Against Lightning (Enhanced Lightning Protection) To reduce damage from induced lightning, surge resistance performance has been strengthened. *This does not guarantee against failures or malfunctions caused by lightning strikes. ■Structure Preventing Insects (Insect and Drip Proof Design) Using insect-proof bushings that wrap around the wires and dedicated gaskets, it achieves dustproof, drip-proof, and insect-proof measures equivalent to IP65. The insect-proof bushing can be cut to match the size of the wire, preventing the entry of insects and water from the wire entry point and protecting the circuit board from corrosion. ■Strong Against Ambient Light (Dual Modulation Method) By adopting our unique dual modulation method for the infrared beam, it enhances the ability to distinguish between ambient light (such as sunlight and car headlights) and ensures reliable outdoor surveillance.

Company：セキュリティハウス
Price：Other

Other security and surveillance systems
Infrared Sensor

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Pioneer of Thermopile Sensors: Hyman Sensor Company

Introducing products from Hyman Sensor, a company based in Germany (Agency: SSC).

Heimann Sensor is a German thermopile manufacturer. They produce and sell "thermopile sensors" used for non-contact temperature measurement and measuring various gas concentrations, as well as "thermopile modules" for easy use of these thermopile sensors. SSCI Co., Ltd. is the only domestic distributor. *For more details, please refer to the catalog or feel free to contact us.

Company：エスエスシー
Price：Other

Radiation thermometer
Infrared Sensor

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Products of SSC Corporation (sensors and cameras for thermography)

Leave thermography to us! We are a manufacturer of thermography modules.

SSC Co., Ltd. is a company that primarily provides non-contact thermometers. By receiving infrared rays with sensors, we achieve temperature measurements in a very short time. Since it is non-contact, measurements can be taken regardless of the distance between the thermometer and the measurement target, expanding our application range into various fields, including safety and environmental sectors. We strive daily to ensure that many people can use our products conveniently and with peace of mind. If you are considering measurement, analysis, or management using infrared sensors, please feel free to consult us. We are also the sole domestic agent for Germany's Heiman Sensor. 【Product Line】 ■ Thermopile-type infrared sensors ■ Sensor application products (temperature sensors, carbon dioxide sensors) ■ Development, design, manufacturing, and sales of electronic measuring instruments using various sensors *For more details, please refer to our catalog or feel free to contact us.

Company：エスエスシー
Price：Other

Sensors
Infrared Sensor

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Outdoor/Indoor Passive Sensor MS-100(BL)

Indoor and outdoor motion sensor switch. Select from four detection patterns in a variable multi-area!

■Adoption of Variable Multi-Area By combining variable multi-area with extensive adjustment functions, it allows for the selection of various mounting locations and four types of detection patterns with a single unit. ■As a switch for lighting and surveillance cameras It can be used for turning indoor and outdoor lighting on and off as an energy-saving and convenient lighting solution, and simultaneously serves as a switch to activate surveillance cameras. 【No-voltage relay contact output (a contact) + no-voltage relay contact output (a contact/b contact switching)】 ■All-weather switch With a rainproof structure, it can be installed not only indoors but also outdoors and semi-outdoors. Moreover, it can be mounted on ceilings, walls, poles, etc., allowing for flexible installation locations. *The rainproof structure is only applicable when mounted vertically: equivalent to IP43. When mounted horizontally, it is not rainproof.

Company：セキュリティハウス
Price：Other

Other security and surveillance systems
Infrared Sensor

View product details

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Explosion-proof infrared sensor PXH-100EXH

Infrared sensors that can be used in hazardous locations such as oil refineries, oil storage bases, gas holders, and chemical factories.

This is a high-performance outdoor long-range infrared sensor that combines intrinsic safety explosion-proof construction and pressure-resistant explosion-proof construction. ■ High-performance explosion-proof sensor with a wide application range This product is an explosion-proof infrared sensor that complies with the "Guidelines for Explosion Protection of Electrical Equipment in Factories (Gas Vapor Explosion 2006)" by the Japan Industrial Safety and Health Association. It features an explosion-proof structure of 'iad2G4' that combines "intrinsic safety explosion-proof (ia)" and "pressure-resistant explosion-proof (d)", making it suitable for use in Class I and Class II hazardous locations. It has a wide application range for target gases, covering explosion grades 1 to 2 and ignition grades G1 to G4, accommodating most explosive gases. ■ Dual modulation method By adopting our unique dual modulation method for the infrared beam, we enhance the distinguishability from stray light (such as sunlight and car headlights), achieving highly reliable outdoor surveillance. ■ Two types: "L" type and "H" type To prevent mutual interference, we offer two types with different frequencies: "L" type and "H" type, allowing for multi-stage surveillance and long-distance linear span monitoring. ■ Equipped with a light reception sensitivity indicator The light reception sensitivity indicator allows for easy adjustment of the optical axis.

Company：セキュリティハウス
Price：Other

Other security and surveillance systems
Infrared Sensor

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Explosion-proof infrared sensor PXH-200EXH

Infrared sensors that can be used in hazardous locations such as oil refineries, oil storage bases, gas holders, and chemical factories.

This is a high-performance outdoor long-range infrared sensor that combines intrinsic safety explosion-proof structure and pressure-resistant explosion-proof structure. ■ High-performance explosion-proof sensor with a wide range of applications This product is an explosion-proof infrared sensor that complies with the "Guidelines for Explosion Protection of Electrical Equipment in Factories (Gas and Vapor Explosion Protection 2006)" by the Japan Industrial Safety and Health Association. It features an explosion-proof structure of 'iad2G4' that combines "intrinsic safety explosion-proof (ia)" and "pressure-resistant explosion-proof (d)", making it suitable for use in Class I and Class II hazardous locations. It has a wide application range for target gases, covering explosion grades 1 to 2 and ignition grades G1 to G4, accommodating most explosive gases. ■ Dual modulation method By adopting our unique dual modulation method for the infrared beam, we enhance the ability to distinguish between external light (such as sunlight and car headlights), achieving reliable outdoor surveillance. ■ Two types: "L" type and "H" type To prevent mutual interference, we offer two types with different frequencies: "L" type and "H" type, allowing for multi-stage surveillance and long-distance linear span monitoring. ■ Equipped with a light reception sensitivity indicator The light reception sensitivity indicator allows for easy adjustment of the optical axis.

Company：セキュリティハウス
Price：Other

Other security and surveillance systems
Infrared Sensor

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Explosion-proof infrared sensor PXH-400EXL

Infrared sensors that can be used in hazardous locations such as oil refineries, oil storage bases, gas holders, and chemical factories.

This is a high-performance outdoor long-range infrared sensor that combines intrinsic safety explosion-proof structure and pressure-resistant explosion-proof structure. ■ High-performance explosion-proof sensor with a wide application range This product is an explosion-proof infrared sensor that complies with the "Guidelines for Explosion Protection of Electrical Equipment in Factories (Gas Vapor Explosion 2006)" by the Japan Industrial Safety and Health Association. It features an explosion-proof structure of 'iad2G4' that combines "intrinsic safety explosion-proof (ia)" and "pressure-resistant explosion-proof (d)", making it suitable for use in Class I and Class II hazardous locations. It has a wide application range for target gases, covering explosion grades 1 to 2 and ignition grades G1 to G4, accommodating most explosive gases. ■ Dual modulation method By adopting our unique dual modulation method for the infrared beam, it enhances the distinguishability from stray light (such as sunlight and car headlights), achieving highly reliable outdoor surveillance. ■ Two types: "L" type and "H" type To prevent mutual interference, we offer two types with different frequencies: "L" type and "H" type, enabling multi-stage surveillance and long-distance linear span monitoring. ■ Equipped with a light reception sensitivity indicator The light reception sensitivity indicator allows for easy adjustment of the optical axis.

Company：セキュリティハウス
Price：Other

Other security and surveillance systems
Infrared Sensor

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Passive Sensor Round Surveillance Type PA-6810B

Basic sensors with energy-saving and compact design!! Black (BL) specifications are now available for all models.

■Energy-saving Design 1 (Low Current Consumption) Reduces current consumption to about one-third (8mA) compared to our conventional products. This allows for the use of smaller power supplies, leading to cost reductions. ■Energy-saving Design 2 (Low Voltage) Operating voltage is DC 7 to 30V. It enables the selection of wiring materials and long-distance wiring without much concern for voltage drop due to wiring resistance. It is also suitable for renovations. ■Black Color Available for All Warning Type Models We have introduced a black version that considers harmony with ceilings in temples, shrines, museums, art galleries, and stores. This allows the sensor to blend into the background and remain inconspicuous (without compromising aesthetics). The visibility and sensitivity of the LED are equivalent to the white models. ■Unique Warning Area Configuration Thanks to our unique optical technology that creates a sharp warning area, effective detection performance is achieved regardless of area settings using a movable mirror. ■Improved Installation and Maintenance We have adopted a snap-in method for attaching and detaching the sensor unit and base unit, allowing for one-touch operation and smooth work.

Company：セキュリティハウス
Price：Other

Other security and surveillance systems
Infrared Sensor

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Passive Sensor Spot Surveillance Type PA-6805B

Basic sensors with energy-saving and compact design!! The black (BL) version is now available for all models.

■Energy-saving Design 1 (Low Current Consumption) The current consumption is reduced to about one-third (8mA) compared to our conventional products. This allows for the use of smaller power supplies, leading to cost reductions. ■Energy-saving Design 2 (Low Voltage) The operating voltage is DC 7 to 30V. This enables the selection of wiring materials and long-distance wiring without much concern for voltage drop due to wiring resistance. It is also suitable for renovations. ■Black Color Available for All Caution-type Models We have introduced a black version that considers harmony with the ceilings of temples, museums/art galleries, stores, etc. This allows the sensor to blend into the background and remain inconspicuous (without compromising aesthetics). Furthermore, the visibility and sensitivity of the LED are equivalent to the white version. ■Unique Caution Area Configuration Thanks to our unique optical technology that creates a sharp caution area, effective detection performance is achieved regardless of area settings with a movable mirror. ■Improved Installation and Maintenance We have adopted a snap-in method for attaching and detaching the sensor unit and base unit, allowing for one-touch operation and smooth work.

Company：セキュリティハウス
Price：Other

Other security and surveillance systems
Infrared Sensor

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Infrared Sensor Near Infrared Type (Reflective) Indoor 1m Use PR-1BU

Indoor embedded infrared sensor available in two types: reflector reflection type (for 5m) and direct reflection type (for 1m).

■Adoption of two types of reflection methods The infrared beam is reflected by the human body passing through the area, and the light entering the main unit is detected, triggering an alarm using the infrared beam light entry method. ■Can be installed discreetly and neatly It is compatible with a single switch box, allowing for a neat installation. Additionally, the ultra-thin design with a protrusion of only 7mm during installation enables unobtrusive security monitoring. ■Easy installation Thanks to the integrated reflection method that combines the light-emitting and light-receiving parts, it can be used with wiring only to the main unit. This allows the infrared sensor to be used even in locations where wiring cannot be routed due to the building's structure. Furthermore, despite being a built-in type, it includes an optical axis adjustment function (±15° horizontally), making post-installation adjustments easy. ■Can detect stationary objects It can detect both moving and stationary objects, making it suitable for various applications, including security. ■User-friendly design ● Contact switching function that can be set according to the operating system (a contact/b contact) ● Tamper function to prevent vandalism ● Alarm indicator light for convenient operation confirmation (red LED: lights up during alarm) ● Sensitivity adjustment available according to the installation location

Company：セキュリティハウス
Price：Other

Other security and surveillance systems
Infrared Sensor

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Infrared Sensor PXB-40TE

The dual-beam opposing infrared sensor has evolved into a new era! An infrared sensor packed with patented technology creates safety and trust!

■Strong against stray light (Dual modulation method) Our unique dual modulation method and photoelectric conversion circuit [patented technology] enhance the ability to distinguish between stray light (such as sunlight and car headlights), achieving highly reliable outdoor surveillance. ■Strong in harsh environments (Two-stage high-power beam) By adopting a high-power beam with 100 times sensitivity margin and 10 times distance margin, we reduce malfunctions during adverse weather conditions such as fog, snow, and heavy rain. ■Energy-saving design (Low power consumption) Compared to conventional products (PB-TE series), power consumption is reduced by over 40%. It can be supported by a smaller power supply than before. ■Green design (Compliance with RoHS directive) Complies with the environmentally conscious RoHS directive. (Eliminates lead, mercury, cadmium, hexavalent chromium, polybrominated biphenyls, polybrominated diphenyl ethers, bisphthalates, butyl benzyl phthalate, dibutyl phthalate, and diisobutyl phthalate.) ■Structure resistant to insect intrusion (Insect-proof and drip-proof design) With insect-proof bushings that encase the wires and a watertight structure, we achieve dustproof, drip-proof, and insect-proof measures equivalent to IP55. The structure is designed to be less susceptible to insects and water intrusion compared to our conventional products.

Company：セキュリティハウス
Price：Other

Other security and surveillance systems
Infrared Sensor

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Infrared sensor, near-infrared beam interruption type, PXB-100F

With evolved performance and workability, connecting safety and trust: 4-stage high-power beam infrared sensor.

■Strong against lightning (Enhanced lightning protection) We have strengthened the surge resistance performance to reduce damage caused by induced lightning. *This does not guarantee protection against failures or malfunctions due to lightning strikes. ■Structure that prevents entry of ants and other pests (Insect and drip-proof design) By using insect-proof bushings and dedicated gaskets that envelop the wires, we achieve high dust, drip, and insect prevention measures (equivalent to IP65). The insect-proof bushing can be cut to fit the size of the wire, preventing the entry of insects and water from the wire entry point and protecting the circuit board from corrosion. ■Energy-saving design (Reduced power consumption) We have significantly reduced power consumption (to less than 50% compared to our previous models). This allows for the use of smaller power supplies than before, eliminating the need for thick wiring even for long-distance connections, thereby greatly reducing wiring material costs. ■Strong against ambient light (Dual modulation method) By adopting our unique dual modulation method for the infrared beam, we enhance the ability to distinguish between ambient light (such as sunlight and car headlights), achieving reliable outdoor surveillance. ■Improved pole mounting (Back-to-back mounting) The adoption of a new pole mounting bracket has improved the workability when mounting back-to-back on a pole.

Company：セキュリティハウス
Price：Other

Other security and surveillance systems
Infrared Sensor

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Infrared sensor, near-infrared beam interruption method, PXB-200F

With evolved performance and workability, connecting safety and trust: 4-stage high-power beam infrared sensor.

■Strong against lightning (Enhanced lightning protection) We have strengthened the surge resistance to reduce damage caused by induced lightning. *This does not guarantee protection against failures or malfunctions due to lightning strikes. ■Structure that prevents entry of ants and other pests (Insect and drip-proof design) By using insect-proof bushings and dedicated gaskets that envelop the wires, we achieve high dust, drip, and insect prevention measures (equivalent to IP65). The insect-proof bushing can be cut to fit the size of the wire, preventing the entry of insects and water from the wire entry point, thus protecting the circuit board from corrosion. ■Energy-saving design (Reduced current consumption) We have significantly reduced current consumption (to less than 50% compared to our conventional models). This allows for the use of smaller power supplies than before, eliminating the need for thick wiring even over long distances, which greatly reduces wiring material costs. ■Strong against ambient light (Dual modulation method) By adopting our unique dual modulation method for the infrared beam, we enhance the ability to distinguish between ambient light (such as sunlight and car headlights) and achieve reliable outdoor monitoring. ■Improved pole mounting (Back-to-back mounting) The adoption of a new pole mounting bracket has improved the workability when mounting back-to-back on poles. As a result, back-to-back mounting has become easier even at high altitudes.

Company：セキュリティハウス
Price：Other

Other security and surveillance systems
Infrared Sensor

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Infrared Sensor Product List and Ranking from 14 Manufacturers, Suppliers and Companies | IPROS GMS

Infrared Sensor Manufacturer, Suppliers and Company Rankings

Infrared Sensor Product ranking