Last Updated： Aggregation Period:May 13, 2026～Jun 09, 2026
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:May 13, 2026～Jun 09, 2026
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:May 13, 2026～Jun 09, 2026
This ranking is based on the number of page views on our site.
31～60 item / All 68 items
Simple, low wiring, space-saving, ultra-compact gripper controller.
By using Atom-G1, a robot hand can be simply created. ○Features○ ≪Ultra-compact gripper controller≫ ・Simple, low wiring, space-saving ・With encoder feedback ≪Multi-axis control via high-speed serial RS485 communication≫ ・MAX: 625Kbps high-speed communication ・Up to 31 axes can be connected ≪Smooth control with S-curve acceleration and deceleration control≫
Data protection is thorough! Positioning controller compatible with AC servo motors from various manufacturers.
The "BMC2XH Series" is a positioning controller for two or more axes. It integrates two axes with the high-speed serial communication type positioning controller "Fics Series" or "LMC Series" and the AC servo positioning driver "Atom Series." With RS485 serial communication control, it is possible to expand motor control to 16 axes. Additionally, data management can be performed using a USB memory via a programmable terminal. 【Features】 ■ Low-cost 2-axis AC servo controller ■ Digital I/O: Standard equipped with 38DI/32DO ■ Compatible with various AC servo motors ■ RS485 serial communication control: Supports 2 to 16 axes ■ SRing serial communication control: Supports 2 to 8 axes *For more details, please refer to the PDF materials or feel free to contact us.
USB2.0 compatible notebook PC can control motors; a compact yet high-performance motor controller (with API mode).
This is a high-performance motor controller equipped with the motor control LSI "PMC842SR." It is capable of linear interpolation and arc interpolation control for up to 2 axes. 【New Feature: "API Mode"】 - Online soft landing function that minimizes impact on the workpiece. - Timing output function that can be used as a trigger for camera shooting or other operations. - Arch motion that can be applied to coating control and vertical movements. - Gantry control utilizing interpolation control (sample function available). 【Features】 - A high-function motor controller that realizes linear/automatic S-curve acceleration and deceleration, as well as linear/arc interpolation control. - Synchronous start for 2 axes is possible. - The USB 2.0 standard allows the motor controller to be handled in tight spaces such as with laptops. - Command settings can automatically calculate the number of pulses required for interpolation drive. - An application for operation verification allows for easy testing operations. *For more details, please download the PDF or feel free to contact us.
A motor controller capable of controlling up to 16 axes with a single board.
PCPG-168 is a 16-axis motor control board equipped with the high-performance LSI "PMC842SR." By directly controlling functions such as interpolation and synchronous control from the PCI bus, it can be applied to various devices. 【Features】 - Speed and movement amount can be changed during operation (override function). - Supports linear acceleration/deceleration and S-curve acceleration/deceleration, with asymmetric settings possible. - By combining linear interpolation and arc interpolation, various trajectories and synchronous operations can be achieved. - Capable of 16-axis synchronous start control. - The automatic pulse count calculation function simplifies complex calculations necessary for operation. - Compatible with pulse input type stepping drivers and servo amplifiers. *For more details, please download the PDF or feel free to contact us.
A 16-axis motion controller that adopts Realtime Express (RTEX) and enables motor control such as trajectory control.
A hybrid motion controller compatible with RealTimeExpress (RTEX) that also supports pulse train output. It can be connected to Panasonic Corporation's MINAS series RTEX amplifiers, enabling reduced wiring and improved efficiency in motor control. Additionally, it allows for switching 4 out of 16 axes to pulse train output, making it possible to use servo drivers and stepping drivers that cannot be connected to the network. For control, we utilize our motor control LSI PMC842SR, allowing for motor control with the same image as pulse train control. *For more details, please download the PDF or feel free to contact us.
Added 16 input points and 16 output points to the minimum size motor controller for the PCI bus.
The PCPG-28/IO is a motor and I/O controller board capable of controlling 2-axis motors and 16 input/16 output points. We provide software for operation verification, so you can perform operation checks immediately after product setup. *For more details, please download the PDF or feel free to contact us.
It is capable of high-speed processing of complex controls without depending on PCs or operating systems, with no waiting time. Acceleration and deceleration settings can also be made in units of 1 millisecond.
The 『PXRP-3216CN』 is a multifunctional motion control board compatible with Realtime Express (RTEX) that can control up to 36 axes. Equipped with Cosmotex's proprietary pulse generation software "PGS," it enables computational processing within the board, allowing for high-speed processing of complex motor control without relying on a PC or OS. In addition to individual settings for start/stop speeds, it allows for overrides of acceleration/deceleration times, target speeds, and movement amounts during operation. It also supports control for changing interpolation data, modifying/correcting target positions, and temporary pauses during operation. 【Features】 ■ Supports RTEX control for up to 32 axes and pulse sequence control for 4 axes ■ Acceleration and deceleration settings can be configured in 1 msec increments between 1pps and 400Mpps ■ Compatible with devices that cannot connect to a network (pulse sequences, I/O) ■ Capable of various interpolation controls, including linear and circular interpolation *For more details, please refer to the PDF documentation or feel free to contact us. *Realtime Express and RTEX are registered trademarks of Panasonic Holdings Corporation.
Positioning motor controller compatible with various software development environments.
This product is a motor control board that can be attached to a computer and is compatible with Windows and Linux. It allows for the control of up to 16 axes of stepper motors, servo motors, and linear motors, with the option to select control boards based on the required number of axes. It is a must-see for those using high-spec software. Experience the functions condensed into a single line! 【Various Application Examples】 - Small devices with a few axes - Multi-axis devices where synchronization is emphasized - Devices that require control speed/feedback, etc. *For more details, please download the PDF or feel free to contact us.
Motor controller for axles that can electrify transport vehicles in construction and logistics sites.
Advanced Motion Control Inc. has developed the 'M/V' series of motor controllers for electric vehicles and various electric vehicles. The 'M/V' series has been designed and developed with both digital and analog models for the latest electric vehicle platforms. It includes inputs necessary for vehicle operation, such as key switches, and the digital model comes standard with CAN-Open communication for easier tuning. For example, the AB200A100 supports a rated current of 125A and a maximum power supply voltage of 80V, enabling high power supply from the battery to the motor. Additionally, it complies with the IP65 dust and water resistance standard, ensuring driving safety even in harsh environments that vehicles may encounter outdoors.
One board can independently control the positioning of eight axes of servo motors or stepping motors!
The MC8082P board is a PCI bus-compatible circuit board equipped with two general-purpose 4-axis motor control ICs, the MCX304. It can independently control the positioning or speed of up to eight servo motors or stepping motors on a single board. 【Features】 ■ PCI half-size with 8-axis independent control ■ Equipped with automatic origin return function for all axes ■ Smooth drive with S-curve acceleration and deceleration *For more details, please request documentation or view the PDF data available for download.
RoHS directive and PCI Express bus compatible! General-purpose 8-axis motor control board.
The "MC8082Pe" is a circuit board compatible with PCI Express ×1 that is equipped with two general-purpose 4-axis motor control ICs, "MCX304." With one board, you can independently control the positioning or speed of 8-axis servo motors or stepping motors. It can also replace the PCI bus compatible board "MC8082P." 【Features】 ■ Independent control of 8 axes ■ Equipped with automatic origin return function for all axes ■ Smooth drive with S-curve acceleration and deceleration ■ Can replace the MC8082P *For more details, please download the PDF or contact us.
PCI bus compatible! General-purpose 2-axis/4-axis motor control board
The "MC8022P/MC8042P" is a PCI bus-compatible circuit board equipped with the general-purpose 4-axis motor control IC "MCX304." With a single board, you can independently control the positioning or speed of 2-axis/4-axis servo motors or stepping motors. 【Features】 ■ Equipped with automatic origin return function for all axes ■ Smooth drive with S-curve acceleration and deceleration ■ Common device driver (can be used in a mixed configuration) ■ Evaluation tools (easy operation confirmation) *For more details, please download the PDF or contact us.
PCI bus and PCI-Express bus compatible! 8-axis motor control board with arc/linear interpolation function.
The "MC8581P" supports PCI bus, while the "MC8581Pe" supports PCI-Express ×1. It is a circuit board equipped with two interpolation function 4-axis motor control ICs, "MCX514." Each unit can independently control the positioning or speed of 8-axis servo motors or stepping motors. The interpolation function has been enhanced compared to previous models, allowing for linear interpolation of up to 8 axes. It also features CW/CCW arc interpolation, 2 to 4-axis bit pattern interpolation, and CW/CCW helical interpolation. 【Features】 ■ Maximum 8-axis linear interpolation ■ Simultaneous operation of two interpolations ■ Helical interpolation ■ Speed range free ■ 8-stage pre-buffer for continuous interpolation *For more details, please download the PDF or contact us.
PCI bus and PCI-Express bus compatible! 4-axis motor control board with arc/linear interpolation function.
The "MC8541P" supports the PCI bus, while the "MC8541Pe" supports PCI-Express ×1, and is a circuit board equipped with the 4-axis motor control IC "MCX514" that features interpolation functionality. With a single board, you can independently control the positioning or speed of 4-axis servo motors or stepping motors. The interpolation functionality has been enhanced compared to previous models, allowing for linear interpolation of up to 4 axes. It also includes CW/CCW arc interpolation, bit pattern interpolation for 2 to 4 axes, and CW/CCW helical interpolation. 【Features】 ■ Speed range free ■ Helical interpolation ■ 8-stage pre-buffer for continuous interpolation ■ Diverse interpolation functions *For more details, please download the PDF or contact us.
PCI Express bus compatible! 4-axis motor control board with arc/linear interpolation function.
The "MC8043Pe" is a circuit board compatible with PCI Express×1, equipped with the 4-axis motor control IC "MCX314As" featuring interpolation functionality. With a single board, you can independently control the positioning or speed of 4-axis servo motors or stepping motors. Additionally, you can select any 2 or 3 axes out of the 4 axes to perform 2-axis/3-axis linear interpolation, CW/CCW circular interpolation, and 2-axis/3-axis bit pattern interpolation (interpolation based on bit data from the CPU). 【Features】 ■ Arc/linear interpolation functionality ■ Capable of high-speed drive ■ Smooth drive with S-curve acceleration and deceleration ■ Can be replaced with MC8043P *For more details, please download the PDF or contact us.
We offer a variety of sensors, including induction sensors, address sensors, and even magnetic tape.
At NA Corporation, we offer a variety of sensors for unmanned transport vehicles. The "Guidance Sensor" detects guidance tape installed on the floor and directs the unmanned transport vehicle to its destination. The "Address Sensor" detects marker magnets placed on the floor and controls the position information (address information) of the unmanned transport vehicle, as well as actions such as stopping and slowing down. The "Guidance Tape" is installed along the travel line of the unmanned transport vehicle, allowing it to move along the tape. The "Marker Magnet" is installed at deceleration and stopping points, as well as at each station, and is used to obtain control signals and position information for the unmanned transport vehicle. 【Product Lineup】 ○ Guidance Sensors (Analog Voltage Output Type, Digital Output Type) ○ Address Sensors (Marker Sensors, Count Sensors) ○ Guidance Tape (Magnetic Tape, Magnetic Rod) ○ Marker Magnets For more details, please contact us or download the catalog.
A manufacturer specializing in the production of geared motors for over 30 years.
We provide gear motors, induction motors, micro brushless motors, gear heads, speed control units, and more.
Precision positioning unit
**Features** ● High Performance With flexible design capabilities and extensive production experience, we propose the most suitable positioning unit for your company. ● Short Delivery Time From design to parts processing and assembly, everything is handled by our in-house staff and equipment. Our integrated system minimizes unnecessary time, allowing us to respond to your requests. ● Low Cost Since it is a custom design, we eliminate all unnecessary functions. Additionally, our in-house production system allows us to meet cost requests.
Digital motion controller for PIMag voice coil drive. Equipped with a wide range of support features.
The PIMag Linear Motor Controller 'C-413' is a digital motion controller for PIMag voice coil drive. It supports one motor channel and two sensor channels, compatible with the V-275 and V-275 linear actuators. It is equipped with a wide range of support functions, including a data recorder that logs movement data such as motor current, speed, position, and position error. Additionally, the PIMag Linear Motor Controller also includes the "C-891" type, which has a maximum average current consumption of 3A. 【Features】 ■ Up to 4 sensor channels with force x2 and position x2 sensors ■ TCP/IP or USB interface for configuration and command transmission (depending on the version) ■ Real-time SPI interface for command transmission (depending on the version) ■ Optional analog input/output ■ Automatic zero function for holding current For more details, please refer to the catalog or feel free to contact us.
Smooth setup and operation with USB control and multi-language support.
The C-891 is a high-performance motion controller specifically designed for PI's PIMag® linear motors. With a maximum control frequency of 20 kHz and an output of 5 A, it enables high-speed and high-precision positioning. Safety features are also ensured with limit switches and protection against temperature and overcurrent. In addition to USB and RS-232, it is equipped with analog inputs and TTL I/O, making it easy to integrate with external sensors. Compact yet highly functional, it excels in various settings such as research and development and production environments.
Motor Controller "One Board Controller" OBC-01
OBC-01 (Motor Controller "One Board Controller") adaptable to development environments using C language 【Features】 ○ Equipped with RISC CPU (SH2) ○ H-UDI interface included ○ SRAM (256k×16) ○ SRAM with no need for power backup ○ 2 pulse or signed 1 pulse output, max 8 channels ○ Servo ON (o), Alarm (i), PG (i) signals ○ USB 1 channel ○ RS232 1 channel ○ RS422 1 channel ○ Parallel In × 24 (direct connection to PLC) ○ Parallel Out × 24 (direct connection to PLC) ○ LCD, LED, 20 KEY interface included ○ Flash memory considerate design ○ Dedicated power supply (stand-alone board) ● For other functions and details, please download the catalog.
A variety of products, including EtherNet/IP direct input types, are available!
We would like to introduce our stepper motor controller, the 'JXC Series.' We offer a variety of products, including the step data input type "JXC51/61 Series" and the PROFINET direct input type "JXCP1 Series." Please feel free to contact us when you need assistance. 【Features of the Step Data Input Type】 ■ Parallel Input/Output ■ Stepper Motor (Servo DC24V) ■ Number of Step Data: 64 points *For more details, please download the PDF or feel free to contact us.
UC900 G7 Controller (with built-in microcontroller) Urawa Industrial
Equipped with a high-performance microcontroller The high-performance microcontroller determines which motor is connected and manages the optimal torque for each motor, maximizing their performance. Auto-cruise function During operation with the foot controller, it can be fixed to a constant rotation speed. (Press the handpiece's hand switch or the controller's START/STOP switch while using the foot controller.) Self-diagnosis function To ensure safety, it monitors the status of the motor and controller. If the controller overheats due to operation in summer or high temperatures, the internal cooling fan will activate. Load level meter The motor's load status is clearly displayed with 8 LEDs. In case of overload, the level meter will light up completely, accompanied by a warning sound. This helps prevent a decrease in motor lifespan due to harsh usage. Digital rotation speed display The rotation speed is displayed digitally. (When the motor is stopped, the set rotation speed is displayed.) Working at the appropriate rotation speed extends the lifespan of the bits.
![[Lineup and Selection] Motor Controllers for DC Brushless Motors](https://image.mono.ipros.com/public/product/image/41a/2000465374/IPROS21887840307563231667.png?w=280&h=280)
Easily implement line tracing functionality. It can be checked and adjusted with free simulation software.
With the "Magnetic Induction Sensor / Motor Controller for AGV," you can easily implement line tracing functionality without complex programming. The controller offers a lineup suitable for systems ranging from 12 to 120V and 10 to 500A. The sensor accurately measures deviations from the center of the track and can also detect magnetic markers. You can observe the magnetic field conditions on the course in real-time with the free dedicated software, contributing to trouble prevention and enabling faster product development. 【Features】 ■ Implement line tracing functionality simply by directly connecting the controller and sensor ■ The sensor ensures a horizontal resolution of 1mm and a detection distance of 10 to 60mm ■ Recognizes course branching and merging ■ Products are available that can control two motors with one controller ■ Ideal for AGV and robot development 【NEW】■ Easily supports remote control operation *For more details, please refer to the materials. Feel free to contact us with any inquiries.
![Dedicated motor controller for mobile robots [Compact and affordable]](https://image.mono.ipros.com/public/product/image/75d/2000465409/IPROS20586664578039978909.png?w=280&h=280)
Suitable for AGVs (Automated Guided Vehicles), electric vehicles, etc.! One motor controller can control two motors.
Control system for AC induction motors with brush, brushless. Ideal for systems from 12V to 120V and 10 to 500A. A rich lineup of single and dual channel options. 【Features】 ■ Built-in battery voltage and temperature sensors ■ Compatible with all rotor sensors including Hall sensors, encoders, resolvers, Sin/Cos, and SSI ■ Automatic setup for brushless motors ■ Supports CANopen and serial communication ■ Field-oriented control (FOC) in sine wave mode
Can control two motors with one unit. Eliminates the need for a fan, contributing to design simplification and cost reduction.
We provide 'motor controllers' suitable for AGVs, mobile robots, and personal mobility devices. With a single controller capable of controlling two motors, it simplifies design and contributes to reducing maintenance effort and costs. We offer a wide variety of types, compatible with brushed, brushless, and AC induction motors. (A 1-channel type is also available.) 【Features】 ■ Control both drive and steering motors with a single controller ■ Free software available for setting adjustments and script creation ■ Supports serial communication such as CAN, enabling integration with external devices ■ Compact design with high heat dissipation performance, eliminating the need for a fan ■ Suitable for systems ranging from 12 to 120V and 10 to 500A *For more details, please refer to the PDF document. Feel free to contact us with any inquiries.
![[Information] How to Choose a Motor Controller <Brushless Motor Version>](https://image.mono.ipros.com/public/product/image/165/2000761513/IPROS97504525975714313716.png?w=280&h=280)
Supports CAN communication! We introduce the lineup of motor controllers and how to choose them!
This document introduces how to choose a "motor controller." This product supports many rotor position detection sensors such as Hall sensors and encoders. It allows for the control of two motors with a single controller, contributing to space-saving. It can help shorten the development time for motor control and makes motor control easier by using PC utility software and scripts. For a product lineup tailored to your application, ranging from a few watts to a maximum of 11 kW, single/dual channel, please refer to the PDF download for more details. [Contents] ■ Choose from motor output ■ Angle sensors ■ External dimensions ■ Video introduction *For more details, please refer to the PDF document or feel free to contact us.
Improved vehicle control and achieved a 20% reduction in power consumption! We propose a product design suitable for electric vehicles.
This product is a motor controller for electric vehicles. The cooling method is heat dissipation to the vehicle counterweight / forced air cooling. Based on our track record with various electric vehicle drive systems, we will propose a suitable system for your vehicle. 【Features】 ■ Control modes: Speed, torque control ■ Protection structure: IP54 ■ Cooling method: Heat dissipation to the vehicle counterweight / forced air cooling ■ Communication: CAN-BUS, RS232C ■ Standards: Compliant with UL583, EN1175-1 (however, obtained not as a standalone but as part of the vehicle) *For more details, please refer to the PDF document or feel free to contact us.
Controller that can control up to 6 axes of motors! Utilizing MTmate.
"KImaster" is a controller that takes advantage of the benefits of the motor amplifier "MTmate." By directly controlling the motors with "MTmate," it enables coordinated movements between each motor, similar to a robotic arm. This product connects to a higher-level host via a Modbus network using RS232C, and no special hardware is required. Major PLC manufacturers provide Modbus interfaces. [Features] ■ Utilizes the motor amplifier "MTmate" ■ Enables coordinated movements between each motor like a robotic arm ■ Capable of controlling up to 6 axes of motors *For more details, please refer to the PDF document or feel free to contact us.
