Last Updated： Aggregation Period:Jul 15, 2026～Aug 11, 2026
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Jul 15, 2026～Aug 11, 2026
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Jul 15, 2026～Aug 11, 2026
This ranking is based on the number of page views on our site.
91～120 item / All 200 items
90% are custom-made products. We accommodate small lots, offer material selection, cost reduction, strength enhancement, and can suggest processing methods! Samples available. Prototyping possible.
【Features】 ■ High nut ■ Press ■ Riveting ■ Cut bolts ■ Prototyping We will use this for prototyping! We will combine the cut bolts and high nuts, and rivet them with a press.
If you have any requests for impellers or thin castings, please feel free to contact us!
Our company conducts casting of two types of materials: stainless steel castings related to pumps and copper alloy castings. Regarding stainless steel, we can accommodate JIS as well as ASTM materials. The casting is performed at two factories; the Gifu Hashima factory handles small items up to a maximum of 350 kg. Additionally, the Niigata Kounosu factory is capable of casting medium-sized items up to a maximum of 1,500 kg in both cast steel and stainless steel. 【Equipment (partial excerpt)】 ■ High-frequency induction furnace for SCS 600 kg x 1 unit, manufactured by Induct Japan, H19 ■ High-frequency induction furnace for SCS 300 kg x 1 unit, manufactured by Induct Japan, H14 ■ Tilting melting furnace for CAC 400 kg x 1 unit, manufactured by Yamashita Casting Store, H04 ■ Alkali sand regeneration and mixing equipment 1H/5t x 1 unit, manufactured by Shinto Industry, H14 ■ Sand mixer EMD2 type x 2 units, manufactured by Enshu Iron Works, S56 *For more details, please download the PDF or contact us.
Hydraulic piston pump with a fixed pressure of 35 MPa and a maximum discharge volume of 360 cm³/rev.
Parker's variable displacement axial piston pump is a compact hydraulic pump with low noise and high responsiveness.
A small piston pump with high pressure and high vacuum.
The small piston pump is an oil-free, maintenance-free pump. It features low operating noise and low vibration. The input voltage is DC 12 or 24V. There is also a BLDC motor model available.
An oil-free piston pump that can perform pressurization and vacuum extraction simultaneously with a single pump. It features a BLDC motor and weighs approximately 1 kg!
Special resin is used in the sliding parts, achieving long life and maintenance-free operation. It is widely adopted in medical devices. High-efficiency BLDC horizontally opposed piston pump (low power consumption model compatible with battery operation). PV (Pressure/Vacuum) specification that can perform both pressurization and depressurization with a single unit.
The 230 series is a piston pump equipped with a high-efficiency BLDC motor. It is portable and suitable for applications that require high pressure and low power consumption.
The flow rate is variable, with 10 LPM at 2,000 rpm, and the maximum pressure during continuous operation is 200 kPa.
![[Free Catalog] WOB-L Piston Pump Nexus Series](https://image.mono.ipros.com/public/product/image/24e/2000130607/IPROS20792623877744542952.jpeg?w=280&h=280)
We are currently offering a free catalog of our oil-less piston pumps with proven results in the medical field!
The "Nexus Series" is an embedded pump that can be customized according to customer specifications. Generally, performance requirements include flow rate, load pressure, vacuum level, current value, and power consumption. However, the "Nexus Series" offers many options for the cylinder diameter (piston diameter), piston stroke width, stator assembly, and rotor assembly, allowing for the rapid development of a pump that best matches customer specifications by combining these options. Additionally, customization is possible for the mounting position of fittings (port location), lead wire length and terminal processing, mounting position, and tap size. For more details, please download the catalog or contact us.
~The Scent of Success~
◆Challenge of difficult tasks ◆Solutions of the highest quality ◆Results with a sweet fragrance
Entry into a new market realized with the strongest partner providing high-quality solutions.
Please download the materials to see how Thomas's compressor entered the water purification equipment market. Thomas, which has achieved optimal pump supply, promises to continue contributing to the "water purification equipment market" in the future.
A wide range of liquid agents can be used, including biodegradable processing oils and quick-drying processing oils!
【Micro Dispensing Piston Pump】 A wide range of liquids can be used, including biodegradable processing oils and fast-drying processing oils. The pump can be controlled solely by air supply (when using a pulse oscillator), making it suitable for use in explosion-proof areas. 《Product Specifications》 Dispensing Volume: 0–0.07mL/shot Dispensing Cycle: 2 times/second (maximum) Pump Ratio: 1:5 (at air pressure of 0.3MPa, dispensing pressure of 1.5MPa, dispensing volume of 0.05mL/shot) Operating Air Pressure Range: 0.3–0.7MPa 0.4–0.7MPa (for pulse oscillator specification) Operating Viscosity Range: 2–180mm²/s Standard Number of Pump Circuits: 1.8L Tank: 3 circuits 3.0L Tank: 5 circuits Tank Capacity: 1.8L, 3L resin tank (standard) ● For more details, please download and view the catalog.
It is an air-driven pump that operates the piston by opening and closing a three-way solenoid valve.
The "PM type" is a quantitative valve system compatible with large machinery and a quantitative spraying pump for processing oil. It is an air-driven pump that operates the piston by opening and closing a three-way solenoid valve. 【Specifications】 ○ Pump ratio 1:5 (Air pressure 0.5MPa) ○ Discharge volume 8cc/shot (6cc, 7cc - made to order) For more details, please contact us or download the catalog.
It is a pump suitable for machines that require refueling several times a day, and it is integrated with the tank.
The "LT-S type" is a quantitative valve system compatible with large machinery, featuring a manual high-pressure intermittent discharge piston pump. It is suitable for machines that require oiling several times a day and is integrated with the tank. 【Pump Specifications】 ○ Discharge oil volume: 8ml/shot ○ Discharge pressure: 3.4MPa (set pressure of safety valve) For more details, please contact us or download the catalog.
It is a sister product of the MMXL type, suitable for compact machines with limited installation space.
The "MLZ type" is a low-cost, space-saving lubrication system for small machinery, featuring an electric intermittent discharge small piston pump. It is a sister product of the MMXL type and is suitable for small machines with limited installation space. Both standard and CE-compliant models are available. 【Pump Specifications】 ○ Discharge oil volume: 1.5 to 2.5 ml/stroke ○ Discharge pressure: 0.3 MPa For more details, please contact us or download the catalog.
High-pressure pump specialized for the supply of polyurethane raw materials! The supply amount of the raw materials can be easily adjusted.
The "A7VK Series" is a high-pressure variable displacement piston pump for polyurethane, designed with a compact structure that allows for a more compact overall line and easy replacement work. This model features special surface treatments and uses special materials for components and seals to enhance corrosion resistance. (The supply capacity and specifications are equivalent to those of the A2VK.) Additionally, the pump mounting bolt pitch, bolt size, and input shaft shape are the same as those of the A2VK, making it easy to replace the A2VK with the A7VK. (Some repositioning of the connecting piping may be necessary.) 【Features】 ■ Specially designed for the supply of polyurethane raw materials such as isocyanates and polyols ■ Compact design ■ The supply amount of raw materials can be easily adjusted with a variable handle *For more details, please refer to the PDF materials or feel free to contact us.
High-precision dispensing ceramic piston pump
- This is a ceramic piston pump driven by a stepping motor, equipped with a light sensor, achieving high repeatability accuracy (CV 0.5%). - It uses wear-resistant ceramics, achieving a lifespan of over 10 million cycles*. - The wetted materials are PVDF, PTFE, and Al2O3, which have excellent corrosion resistance. - The standard flow rates are set at 100 μL, 200 μL, and 300 μL/shot, but customization is possible upon request. * Based on our experimental conditions. * For more details, please contact us or download the PDF.
Wiring fixtures secure bundles of wires without using cable ties. They can be selected based on application, such as adhesive types, screw types, and materials.
The wiring fixture secures bundled wires without using cable ties. There are three types of fixing methods: the "adhesive fixing type," which can be secured with pre-attached adhesive tape; the "screw fixing type," which uses screws; and the "push-in fixing type," which can be secured without using screws or adhesive tape. For more details, please contact us or refer to the catalog.
Priming piston-type high-viscosity pump
■Stainless steel specifications suitable for water-based materials ■High durability severe duty specifications for rods and cylinders ■Large pump volume allows for high-capacity discharge ■Floating piston seal and priming plate improve pressure balance and performance
Pressure-balanced pump that enables uniform discharge.
■High durability severe duty specification rods and cylinders ■Large pump displacement allows for high-capacity discharge ■Floating piston seal and priming plate improve pressure balance and performance ■Maintains pressure balance over a wide viscosity range ■Minimal bead distortion enables accurate discharge of expensive materials
High-capacity high-pressure pump for transferring high-viscosity materials
- Prepared specifications in carbon steel and stainless steel for severe duty. - High discharge rate of 10.6L/min (60cpm). - For 200L drums or 20L pails. - Pressure ratios of King 65:1, Bulldog 31:1, and Senator 19:1 available. - High discharge and high pressure improve productivity. - Increased discharge per cycle reduces wear, extends lifespan, and saves on repair costs. - Floating piston seal and flow-through priming plate improve priming performance for high-viscosity materials.
The 4-ball circulating piston pump is ideal for low-pressure, high-flow applications with shear-sensitive materials due to its low pulsation. It provides high flow with low cycle reciprocating motion.
The Graco capacity transfer 4-ball piston design is engineered for longer operational periods and performs beyond expectations. It features energy efficiency and the advantages of a piston pump, minimizing fluctuations in outlet pressure with dual lower pumps. - Low noise - No freezing - Three times the efficiency of air drive - Process control, feedback - Slow and smooth switching
No temperature changes at the entrance/exit, and the raw material temperature is constant! Supports high inflow pressure of up to 2MPa.
The "C-RANGE" is an axial piston pump that boasts high discharge accuracy and allows for easy replacement of the shaft seal. It can handle high inflow pressures up to 2MPa, and there are no temperature changes at the inlet/outlet, ensuring a constant raw material temperature. It is specifically designed for polyurethane materials based on years of experience. Additionally, a magnetic coupling is available as an option. 【Features】 ■ Design specifically for polyurethane materials based on years of experience ■ High discharge accuracy ■ Easy replacement of the shaft seal ■ Magnetic coupling available as an option *For more details, please refer to the PDF document or feel free to contact us.
Just by moving the handle up and down, you can transfer high-viscosity liquids.
"Straight Series" S-L (for oil) S-LH-1 (for oil / with hose) ◎ Hand piston pump that requires no power source ◎ Suitable for high-viscosity liquids ◎ Continuous pumping possible with siphon function "Benefits" ● No power supply needed ● Compatible with high-viscosity liquids (up to 10,000 cP) with a specific gravity of 1.5 or less ● Can dispense winter oils that become thick (S-L series) ● Very useful in emergencies and disasters "Features" ● Designed specifically for JIS standard 200L closed drums (large cap G2) ● Continuous pumping possible ● Discharges when the piston is pulled up using an up-and-down piston mechanism * For high-viscosity liquids, please pull the handle up slowly ● Siphon works for low-viscosity liquids ● Discharge volume per stroke is 600cc "Mechanism of the piston pump" It is a mechanism that discharges simply by attaching it to a drum and moving the upper piston up and down. It discharges when the upper piston is pulled up. The discharge volume per stroke is 600cc. This pump is suitable for extracting small amounts of liquid from a drum. Its simple structure is characterized by low failure rates.
Just by moving the handle up and down, you can transfer high-viscosity liquids.
"Straight Series" S-L (for oil) S-LH-1 (for oil / with hose) ◎ Hand piston pump that requires no power source ◎ Compatible with high-viscosity liquids ◎ Continuous pumping possible with siphon function "Benefits" ● No power supply needed ● Suitable for high-viscosity liquids (below 10,000 cP) with a specific gravity (below 1.5) ● Can dispense oils that become hard in winter (S-L series) ● Very useful in emergencies and disasters "Features" ● Exclusively for JIS standard 200L closed drums (large cap G2) ● Continuous pumping possible ● Discharges when the piston is pulled up using an up-and-down piston mechanism * For high-viscosity liquids, please pull the handle up slowly ● Siphon works for low-viscosity liquids ● Discharge volume per stroke is 600cc "Mechanism of the piston pump" It is a mechanism that discharges simply by attaching it to a drum and moving the upper piston up and down. It discharges when the upper piston is pulled up. The discharge volume per stroke is 600cc. This pump is suitable for extracting small amounts of liquid from a drum. Its simple structure is characterized by low failure rates.
Just by moving the handle up and down, you can transfer high-viscosity liquids.
"Straight Series" S-LX (for solvents) S-LXHS (for solvents / with hose) ◎ Hand piston pump that does not require a power source ◎ Compatible with high-viscosity liquids ◎ Continuous pumping possible with siphon function "Benefits" ● No power supply needed ● Compatible with high-viscosity liquids (below 10,000 cP) with a specific gravity of 1.5 or less ● Can dispense oils that become hard in winter (S-L series) ● Very useful in emergencies and disasters "Features" ● Exclusively for JIS standard 200L closed drums (large cap G2) ● Continuous pumping possible ● Discharge occurs when the piston is lifted using an up-and-down piston mechanism * For high-viscosity liquids, please pull the handle up slowly ● Siphon effect works for low-viscosity liquids ● Discharge volume per stroke is 600 cc "Mechanism of the piston pump" It is a mechanism that discharges liquid simply by attaching it to a drum and moving the upper piston up and down. Discharge occurs when the upper piston is pulled up. The discharge volume per stroke is 600 cc. This pump is suitable for extracting small amounts of liquid from a drum. Its simple structure is characterized by low failure rates.
Reliable installation with adhesive tape that has minimal aging deterioration! Introducing our cord keep.
We would like to introduce our cable keeper, the "TS-G Series." It features a strong adhesive tape that allows for secure installation with minimal aging deterioration. The cable holding section is equipped with a foam insulator that does not damage the insulation of the wires. Please feel free to contact us if you have any inquiries. 【Specifications】 ■ Environmental Measures: Compliant with RoHS Directive *For more details, please refer to the PDF document or feel free to contact us.
