Pressure Regulator Product List and Ranking from 51 Manufacturers, Suppliers and Companies

[Camper/RV Supplies] Parmax 3HD 12V

A standard pressure pump that operates with a pressure switch! Equipped with a quick port.

We would like to introduce the "Parmax 3 HD 12V 11.3L/min" that we handle. With the adoption of an internal bypass, it achieves a smooth water flow without pulsation, eliminating the need for an accumulator. All bolts and screws are made of stainless steel with high rust resistance. It has become a standard pressure pump that operates with a pressure switch. 【Features】 ■ A robust and reliable body that withstands short periods of dry running without damage ■ Easy piping with a quick port for one-touch connection (includes a 12mm hose and snap-in port) *For more details, please refer to the PDF document or feel free to contact us.

Company：ニュージャパンヨット
Price：Other

Other pumps
Pressure Regulator

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Parmax 1 - [Ultra Compact Type] 3.8L/min

It is a pressure pump with a pressure switch, compact model with the smallest size in the series, yet it has sufficient discharge capacity.

● This is a pressure pump with sufficient discharge capacity, despite being the smallest compact model in the series, and it comes with a pressure switch. ● All bolts and screws are made of stainless steel for high rust resistance. ● While it has similar capabilities to the same model "Flojet LFP pump," this one can accommodate a 12mm inner diameter hose simply by covering the hose outlet with the included rubber fitting. ● It can be installed both horizontally and vertically (with the head down/motor up). * It is not suitable for long continuous operation. When the motor heats up, wear increases significantly, so if you run it for 10 minutes ON, please use it with a 10-minute OFF cooldown period.

Company：ニュージャパンヨット
Price：Other

Other Auto Parts
Pressure Regulator

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

DK-LOK UHP Pressure Regulator

A diverse lineup ranging from small sizes, medium flow, to large flow.

We would like to introduce the "UHP Bellows Valve" that we handle. It is equivalent to the VCR fittings manufactured by DK-LOK. With high quality and low price, the material used is SUS316L, which is sourced from Japan. We offer a lineup of small to medium flow and large flow types for integrated gas units. There are also dome-shaped products with preset secondary pressure. Please feel free to contact us if you have any requests. 【Our Features】 ■ High-quality products with excellent cost performance ■ Specialists in LOK fittings, pressure sensors, and pressure gauges ■ A wide range of product lineup *For more details, please download the PDF (English version) or feel free to contact us.

Company：ロックフィット
Price：Other

valve
Pressure Control
Other semiconductor manufacturing equipment
Pressure Regulator

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Commercial Power Supply Automatic Switch AS-001

Commercial Power Supply Automatic Switch AS-001 ■□■Features■□■ ■ The AC100V supplied through the inverter, generated by eco-power (wind power and solar power), may become unavailable to the electrical devices in use if the protection circuit of the power controller activates or if the power supplied from the battery decreases. ■ This device switches to commercial power supply when the power supply from eco-power stops, and automatically returns to eco-power supply when it becomes available again. ■ The input power in use is indicated by a red or green indicator. ■ For other functions and details, please contact us.

Company：エムエスイー
Price：Other

Converters and Transducers
Pressure Regulator

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Leave high differential pressure and large flow rates to Burkert's MFC!

The Burkert MFC can handle high differential pressure (2.2 MPa) and high flow rates (2500 lN/min). It is compatible with air and various other gases!

For over 70 years, we have cultivated technology and achievements as a long-established manufacturer of fluid control devices specializing in electromagnetic valves and flow control valves. We realize mass flow control of gases with MFC even under high differential pressure and high flow rates. 【One unit performs multiple roles, reducing total costs!】 ● By accommodating high differential pressure (2.2 MPa), there is no need for pressure-reducing valves or regulators that were previously required. ● By supporting high flow rates (2500 lN/min (N2)), multiple MFCs can be consolidated into one unit. ● Capable of controlling flow rates from low to high (for example, 50 to 2500 lN/min (N2)) with a single unit. ● Models compatible with ammonia are also available. ● Equipped with inline sensors to achieve smooth control even at low differential pressures. ● Complete shut-off is achieved with resin seals and shut-off functions. 【Easy to introduce & ready for immediate use!】 ● Shipped calibrated, so no setup or adjustments are needed for immediate use. ● No dedicated power supply is required (operates on DC24V), making it easy to implement. 【Unique to Bürkert & IoT generation】 ● Compatible with communication methods such as OpenCAN, fieldbus, and RS485. ● Proposals focusing on maintenance and space-saving features are also possible!

Company：ビュルケルトジャパン
Price：Other

Flow Control
Pressure Regulator

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Flow meter with one-piece pressure regulator "FR-I Series"

FR-I Series RoHS Compliant Product One-Stage Pressure Regulator with Flow Meter

The one-piece pressure regulator with flow meter, "FR-I Series," is compliant with the RoHS directive. Crown pressure regulators, flow meters, and gas supply devices are used for all types of gases, from ultra-high pressure to low pressure, and from high flow to low flow, including industrial gases, standard gases for scientific use, and medical gases. They are manufactured in our own factory equipped with the latest facilities, covering everything from parts processing to assembly, inspection, and final packaging. Yutaka designs, manufactures, and sells various gas control devices, including pressure regulators, under the ISO 9001 quality management system and ISO 14001 environmental management system. 【Main Material Specifications】 ○ Regulator Body: C3604BD ○ Regulator Cover: ZDC ○ Valve Seat: C3604BD ○ Valve Seat: NBR ○ Diaphragm: NBR For more details, please contact us or download the catalog.

Company：ユタカ
Price：Other

Pressure Control
Flow Meter
Pressure Regulator

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Cylinder-mounted two-stage pressure regulator "FR-IIS-OP Series"

RoHS directive compliant! Two-stage pressure regulator with a cylinder mount made of main material C3604BD.

The "FR-IIS-OP series" is a two-stage pressure regulator with a cylinder mounting type, made from the main material C3604BD and compliant with the RoHS directive. Crown pressure regulators, flow meters, and gas supply devices can be used for all types of gases, from ultra-high pressure to low pressure, and from large flow rates to small flow rates, including general industrial gases, standard gases for scientific use, and medical gases. They are manufactured in our own factory equipped with the latest facilities, covering everything from parts processing to assembly, inspection, and final packaging. Yutaka designs, manufactures, and sells various gas control devices, including pressure regulators, under the ISO9001 quality management system and ISO14001 environmental management system. 【Main Materials】 ○ Regulator body: C3604BD ○ Regulator cover: ZDC ○ Valve seat: C3604BD ○ Valve seat/diaphragm/safety valve seat: NBR For more details, please contact us or download the catalog.

Company：ユタカ
Price：Other

Pressure Control
Pressure Regulator

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Single-stage pressure regulator "FR-I0 Series"

RoHS directive compliant! This is a single-stage pressure regulator made of primary material C3604BD.

The "FR-I0 series" is a single-stage pressure regulator made of primary material C3604BD and compliant with the RoHS directive. Crown pressure regulators, flow meters, and gas supply devices are used for all types of gases, from ultra-high pressure to low pressure, and from high flow to low flow, including industrial gases, standard gases for scientific use, and medical gases. They are manufactured in our own factory equipped with the latest facilities, covering everything from parts processing to assembly, inspection, and final packaging. Yutaka designs, manufactures, and sells various gas control devices, including pressure regulators, under the ISO 9001 quality management system and ISO 14001 environmental management system. 【Main Materials】 ○ Regulator Body: C3604BD ○ Regulator Cover: ZDC ○ Valve Seat: C3604BD ○ Valve Seat/Diaphragm/Safety Valve Seat: NBR For more details, please contact us or download the catalog.

Company：ユタカ
Price：Other

Pressure Control
Pressure Regulator

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

FCR-N Series Pressure Regulator with Built-in Heater and Flow Meter for Carbon Dioxide Gas

It is a pressure regulator with a built-in heater for carbon dioxide flow meters made of main material C3771BE.

The "FCR-N Series" is a pressure regulator with a built-in flow meter for carbon dioxide, made from the main material C3771BE. Crown pressure regulators, flow meters, and gas supply devices are used for all types of gases, from ultra-high pressure to low pressure, and from high flow to low flow, including general industrial gases, standard gases for scientific use, and medical gases. They are manufactured in our own factory equipped with the latest facilities, covering everything from parts processing to assembly, inspection, and final packaging. Yutaka designs, manufactures, and sells various gas control devices, including pressure regulators, under the ISO9001 Quality Management System and ISO14001 Environmental Management System. 【Main Material】 ○ Regulator Body: C3771BE ○ Regulator Cover: ADC12 ○ Valve Seat: C3604BD ○ Valve Seat: PCTFE ○ Diaphragm/Safety Valve Seat: NBR For more details, please contact us or download the catalog.

Company：ユタカ
Price：Other

Pressure Control
Flow Meter
Pressure Regulator

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Gas Saver for Welding Machines "ECORE Series"

It can reduce unnecessary gas emissions and the negative impact on welding quality.

The gas saver for welding machines, the "ECORE series," reduces the gas peak phenomenon that occurs at the start of arc welding (the maximum release phenomenon at the moment the torch switch is pressed), thereby minimizing unnecessary gas release and negative impacts on welding quality. Crown pressure regulators, flow meters, and gas supply devices can be used for all types of gases, from ultra-high pressure to low pressure, and from high flow to low flow, including general industrial gases, standard gases for scientific use, and medical gases. They are manufactured in our own factory equipped with the latest facilities, covering everything from parts processing to assembly, inspection, and final packaging. Yutaka designs, manufactures, and sells various gas control devices, including pressure regulators, under the ISO 9001 quality management system and ISO 14001 environmental management system. 【Main Material Specifications】 ○ Saver body: C3604BD ○ Cover: C3604BD ○ Housing: C3604BD ○ Valve seat: NBR For more details, please contact us or download the catalog.

Company：ユタカ
Price：Other

Other process controls
Pressure Regulator

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Brass outlet valve equipped two-stage precision pressure regulator GF2-4-V series

RoHS compliant product! Brass outlet valve with two-stage precision pressure regulator.

The "GF2-4-V series" is a two-stage precision pressure regulator with a brass outlet valve. It is a RoHS compliant product. We offer a lineup including the "GF2-2503-RX-V" with a low-pressure gauge of 0.3MPa, as well as the "GF2-2510-RS2-V." Our company designs, manufactures, and sells various gas control devices, including pressure regulators, under the ISO9001 quality management system and ISO14000 environmental management system. 【Standard Specifications (Partial)】 ■ High-pressure gauge: 25MPa ■ Low-pressure gauge: 1MPa ■ Inlet pressure (P1): 14.8MPa or less ■ Regulated pressure (P2): 0 to 0.99MPa ■ Weight: 1.7kg *For more details, please refer to the PDF document or feel free to contact us.

Company：ユタカ
Price：Other

Pressure
Other measurement, recording and measuring instruments
Pressure Regulator

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Pressure Regulator for Physical and Chemical Science Standard Gases 'e-science'

A wide range of products, including "brass precision pressure regulators" and "compact two-stage pressure regulators for analysis," is available from ultra-high pressure to low pressure! *Catalog available upon request.

The "e-science" series introduces precision pressure regulators with brass outlet valves, such as the "GF series," and those with stainless steel outlet valves, like the "GSN series." Our pressure regulators are used for a variety of gases, including general industrial gases, scientific standard gases, medical gases, and gases for semiconductor manufacturing processes, ranging from ultra-high pressure to low pressure, and from large flow rates to small flow rates! 【Product List by Type (Partial)】 ■ Brass Single Stage Type: GF1-3 / GF1-4-V / GF1-4-VPV ■ Brass Two Stage Type: GF2-4-V / GF2-4-VPV / GF2-4-F ■ Stainless Steel Single Stage Type: GSN1-3 / GSN1-4-V / GSN1-4-VP ■ Stainless Steel Two Stage Type: GSN2-4-V / GSN2-4-VP / GSN2-4-F ■ Screw Connection: Twist-Free Connector for Cylinders ■ Compact Two Stage Type for Analysis: MBR2 ■ Angular Type for Piping: BF1 / BS1 / BFM / BSM ■ Compact Type for Scientific Use: GFM / GSM ■ For Standard Gas Push Cans: CR-10-2 *Please view the "e-science" catalog from the PDF download button below.

Company：ユタカ
Price：Other

Pressure
Other physicochemical equipment
Pressure Regulator

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

High pressure low flow valve, manufactured by Tescom, VJ series.

Multipurpose ultra-high pressure valve

■ Select angle and glove pattern ■ Maximum operating pressure of 68.9 MPa with stainless steel 316 body

Company：テクメイション
Price：Other

valve
Pressure Regulator

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

UE Corporation Precision Sensor Micro Differential Pressure Monitor Eco Line

The only differential pressure gauge in the world that meets the UL991 and S2 safety standards! Please consider the EcoLine, the ideal micro differential pressure monitor for safety management.

Obtained the stringent UL991 and SEMI-S2 certifications that cannot be acquired by other companies. A structure that eliminates malfunctions caused by runaway or potential bugs without using a microcontroller. Compact and integrated design. We can accommodate various requests (such as corrosion-resistant types). Various optional settings are available for safety and ease of use.

Company：テクメイション
Price：Other

Sensors
Pressure Regulator

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Air Pressure Pump APD-20/APD-25

A pump that uses compressed air to transfer liquids by utilizing internal pressure! Minimizes residual liquid, energy-efficient, and suitable for safely dispensing highly flammable liquids.

◎ Explosion-proof design that does not use electricity ◎ Double safety structure for peace of mind ◎ Can be stored in a sealed manner ◎ Compatible with high-viscosity liquids ◎ Low failure rate ◎ Efficient liquid discharge without waste ◎ Discharge method can also be selected ≪Advantages≫ ● Minimal residual liquid (approximately 200cc), can discharge without waste ● Safe transfer of volatile and flammable liquids ● Quiet operation driven by a 1 horsepower compressor ● Low air consumption and energy-efficient ● Acceptable for small amounts of foreign matter contamination ● Continuous operation possible ≪Features≫ ● Dedicated for JIS standard 200L closed drums (large cap G2) ● Sealed pressurized type for discharge only, not for recovery ● Double pressure reduction with regulator and safety valve for safety ● Equipped with an anti-static grounding wire (only for G, AS, SUS types) ≪Mechanism of Air Pressure Pump≫ This pump inserts depressurized compressed air into the drum, changing the internal pressure of the drum to discharge and draw in liquid. There are no obstacles in the flow path, so it can handle liquids with foreign matter contamination and viscosity (up to 3,000 cP) without failure. Additionally, since it is air-operated, it can be used with liquids and environments that pose a risk of ignition or explosion. *Flow meter and gun nozzle included; foreign matter contamination not allowed.

Company：AQUASYSTEM head office・Sugoshi Factory・Overseas Subsidiary（CHINA・THAILAND・VIETNAM）
Price：Other

Other pumps
Pressure Regulator

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Air Pressure Pump APD-20N/APD-25N

A pump that uses compressed air to utilize internal pressure for transfer, equipped with an oil gun nozzle! Minimizes residual liquid, energy-saving, and suitable for safely dispensing highly flammable liquids in small quantities.

◎ Explosion-proof design that does not use electricity ◎ Double safety structure for peace of mind ◎ Can be stored in a sealed manner ◎ Compatible with high-viscosity liquids ◎ Low failure rate ◎ Efficient liquid discharge without waste ◎ Discharge method can also be selected ≪Advantages≫ ● Minimal residual liquid (approximately 200cc), can discharge without waste ● Safe transfer of volatile and flammable liquids ● Quiet operation driven by a 1 horsepower compressor ● Low air consumption and energy-efficient ● Acceptable for small amounts of foreign matter contamination ● Continuous operation possible ≪Features≫ ● Dedicated for JIS standard 200L closed drums (large cap G2) ● Sealed pressurized drum for discharge only, not for recovery ● Double pressure reduction with regulator and safety valve for safety ● Equipped with an anti-static grounding wire (only for G, AS, SUS types) ≪Mechanism of Air Pressure Pump≫ This pump inserts depressurized compressed air into the drum, changing the internal pressure of the drum to discharge and inhale liquid. Since there are no obstacles in the flow path, it can handle liquids with foreign matter contamination and viscosity (up to 3,000 cP) without failure. Additionally, because it is air-operated, it can be used with liquids and environments that pose a risk of ignition or explosion. *Flow meter and gun nozzle included; foreign matter contamination is not acceptable.

Company：AQUASYSTEM head office・Sugoshi Factory・Overseas Subsidiary（CHINA・THAILAND・VIETNAM）
Price：Other

Other pumps
Pressure Regulator

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Air Pressure Pump APD-20G/APD-25G

A pump that uses compressed air to transfer liquids such as kerosene, light oil, and gasoline! It minimizes residual liquid, is energy-efficient, and safely dispenses highly flammable liquids in small quantities.

◎ Explosion-proof design that does not use electricity ◎ Double safety structure for peace of mind ◎ Can be stored in a sealed manner ◎ Compatible with high-viscosity liquids ◎ Low failure rate ◎ Efficient liquid discharge without waste ◎ Discharge method can also be selected ≪Advantages≫ ● Minimal residual liquid (approximately 200cc), can discharge without waste ● Safe transfer of volatile and flammable liquids ● Quiet operation with a 1 horsepower compressor ● Low air consumption and energy-efficient ● Acceptable with small amounts of foreign matter contamination ● Continuous operation possible ≪Features≫ ● Dedicated for JIS standard 200L closed drums (large cap G2) ● Sealed pressurized drum for discharge only, not for recovery ● Double pressure reduction with regulator and safety valve for safety ● Equipped with an anti-static grounding wire (only for G, AS, SUS types) ≪Mechanism of Air Pressure Pump≫ This pump inserts depressurized compressed air into the drum, changing the internal pressure of the drum to discharge and draw in liquid. Since there are no obstacles in the flow path, it can handle liquids with foreign matter contamination and viscosity (up to 3,000 cP) without failure. Additionally, being air-operated, it can be used with liquids and environments that pose a risk of ignition or explosion. *Flow meter and gun nozzle included; foreign matter contamination is not acceptable.

Company：AQUASYSTEM head office・Sugoshi Factory・Overseas Subsidiary（CHINA・THAILAND・VIETNAM）
Price：Other

Other pumps
Pressure Regulator

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Air Pressure Pump APD-20ASN/APD-25ASN

A pump that uses internal pressure with compressed air for transferring liquids, equipped with a solvent nozzle! Minimizes residual liquid, energy-efficient, and suitable for safely dispensing highly flammable liquids.

◎ Explosion-proof design that does not use electricity ◎ Double safety structure for peace of mind ◎ Can be stored in a sealed manner ◎ Compatible with high-viscosity liquids ◎ Low failure rate ◎ Efficient liquid discharge without waste ◎ Discharge method can also be selected 《Advantages》 ● Minimal residual liquid (approximately 200cc), can discharge without waste ● Safe transfer of volatile and flammable liquids ● Quiet operation with a 1 horsepower compressor ● Low air consumption and energy-saving ● Acceptable for small amounts of foreign matter contamination ● Continuous operation possible 《Features》 ● Dedicated to JIS standard 200L closed drums (large cap G2) ● Sealed pressurized drum for discharge only, not for recovery ● Double pressure reduction with regulator and safety valve for safety ● Equipped with an anti-static grounding wire (only for G, AS, SUS types) 《Air Pressure Pump Mechanism》 This pump inserts depressurized compressed air into the drum, changing the internal pressure of the drum to discharge and draw in liquid. Since there are no obstacles in the flow path, it can handle liquids with foreign matter contamination and viscosity (up to 3,000 cP) without failure. Additionally, because it is air-operated, it can be used with liquids and environments that pose a risk of ignition or explosion. *Flow meter and gun nozzle included; foreign matter contamination is not acceptable.

Company：AQUASYSTEM head office・Sugoshi Factory・Overseas Subsidiary（CHINA・THAILAND・VIETNAM）
Price：Other

Other pumps
Pressure Regulator

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Air Pressure Pump APD-20SUS/APD-20SUSN

A pump that uses compressed air to transfer liquids by utilizing internal pressure! It minimizes residual liquid, is energy-efficient, and is suitable for safely dispensing highly flammable liquids in small quantities.

◎Explosion-proof design that does not use electricity ◎Double safety structure for peace of mind ◎Can be stored in a sealed manner ◎Compatible with high-viscosity liquids ◎Low failure rate ◎Efficient liquid discharge ◎Discharge method can also be selected 《Benefits》 ●Minimal residual liquid (approximately 200cc), capable of efficient discharge ●Safe transfer of volatile and flammable liquids ●Quiet operation with a 1 horsepower compressor ●Low air consumption and energy-saving ●Acceptable for small amounts of foreign matter contamination ●Continuous operation possible 《Features》 ●Dedicated to JIS standard 200L closed drums (large cap G2) ●Designed for discharge only with sealed pressurized drums, not for recovery ●Double pressure reduction with a regulator and safety valve for added safety ●Equipped with an anti-static grounding wire (only for G, AS, SUS types) 《Mechanism of the Air Pressure Pump》 This pump inserts depressurized compressed air into the drum, changing the internal pressure of the drum to discharge and draw in liquid. Since there are no obstacles in the flow path, it can handle liquids with foreign matter contamination and viscosity (up to 3,000 cP) without failure. Additionally, being air-operated, it can be used with liquids and environments that pose a risk of ignition or explosion. *Flow meter and gun nozzle included; foreign matter contamination not allowed.

Company：AQUASYSTEM head office・Sugoshi Factory・Overseas Subsidiary（CHINA・THAILAND・VIETNAM）
Price：Other

Other pumps
Pressure Regulator

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Separate Type Air Pressure Pump APDS-1s/1.5s

[Sanitary product / Heloor joint specification] For large-volume transfer of high-viscosity liquids! It is a separable air pressure pump that can be disassembled for cleaning.

◎Explosion-proof design without electricity ◎Double safety structure for peace of mind ◎Compatible with high-viscosity liquids ◎Can be stored sealed ◎Low failure rate ◎Can be used for both discharge and suction 《Advantages》 ●Minimal residual liquid (approximately 200cc), no waste in discharge ●Safe transfer of volatile and flammable liquids ●Quiet operation with a 1 horsepower compressor ●Low air consumption and energy-efficient ●Acceptable with small amounts of foreign matter contamination ●Continuous operation possible ●Easy to clean due to a structure that allows disassembly ●Available in sanitary-grade hygienic fittings ●Sanitary type has a proven track record in food applications (APDS-1s, 1.5s) *Does not comply with the Food Sanitation Act. 《Features》 ●Dedicated to JIS standard 200L closed drums (large cap G2) ●Sealed pressurized drum for discharge only, not for recovery ●Double pressure reduction with regulator and safety valve for peace of mind ●Pressure section (G3/4) and discharge section (G2) are separate

Company：AQUASYSTEM head office・Sugoshi Factory・Overseas Subsidiary（CHINA・THAILAND・VIETNAM）
Price：Other

Other pumps
Pressure Regulator

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Air Pressure Pump APD-20GATNB

Industry first! Medium viscosity oil can also be auto-stopped!

"Battery-operated sensor auto-stop nozzle air pressure pump" APD-20GATNB (for diesel, kerosene, and medium viscosity oil) <Description of the main unit> - Ideal for refueling and dispensing operations of kerosene, diesel, and medium viscosity oil. - The nozzle is equipped with a built-in sensor that automatically stops when it detects liquid. - The auto-stop function prevents spills that occur when transferring liquid to a container, contributing to cost reduction and environmental improvement by eliminating oil stains and odors. - Operates on three AA lithium batteries, allowing for approximately 200 uses under normal conditions. *Please pay attention to the operating pressure and flow range.

Company：AQUASYSTEM head office・Sugoshi Factory・Overseas Subsidiary（CHINA・THAILAND・VIETNAM）
Price：Other

nozzle
Pressure Regulator

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Air Pressure Pump APD-20ATNB

Auto-stop gun nozzle specification compatible with medium viscosity oil!

"Battery-operated sensor auto-stop nozzle air pressure pump" APD-20ATNB (for diesel and kerosene) <Main Description> - Ideal for refueling and dispensing operations of kerosene and diesel. - The nozzle is equipped with a built-in sensor that automatically stops when it detects liquid. - The auto-stop function prevents spills that occur when transferring liquid to a container, helping to eliminate oil stains and odors, thereby contributing to cost reduction and environmental improvement. - Operates on three AA lithium batteries, allowing for approximately 200 uses under normal conditions. *Please pay attention to the operating pressure and flow range.

Company：AQUASYSTEM head office・Sugoshi Factory・Overseas Subsidiary（CHINA・THAILAND・VIETNAM）
Price：Other

nozzle
Pressure Regulator

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Steam Energy-Saving Pressure Regulator "Bison Cyclone"

Dren is unlikely to occur! Achieving an ideal throttling pressure reduction with extremely low nozzle loss!

The "Bison Cyclone" is a pressure regulator manufactured by the special engineering company In-Nai, which converts steam sent from the boiler side into dry steam and can send it to factory equipment. After the moist steam, which contains a lot of moisture, is squeezed by 16 nozzles that create the steam cyclone, it is rapidly expelled and expanded, producing steam with an increased dryness level due to the "throttling and decompression effect." The stable high-temperature steam sent to the secondary steam header is less likely to condense during transport to the factory, and is supplied to steam-using equipment and machinery in very good condition. 【Features】 ■ Achieves energy savings of 10-20% ■ Mist completely evaporates, increasing steam volume ■ Transforms into superheated steam that is less likely to produce condensate ■ Reduces steam loss due to condensate ■ Achieves a 7% reduction in steam generation (fuel consumption) *For more details, please refer to the catalog or feel free to contact us.

Company：サカノシタ
Price：Other

Pressure Control
others
Pressure Regulator

View product details

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Light Beam Heater Controller BC Series

【Overview】 The BC series light beam heater controller (power supply for halogen lamp heaters) can be used with lamp voltages of 12V and 24V, as well as 100V and 200V interchangeably. 【Features】 ● Soft start with phase control output to prevent disconnection during startup ● Compact and lightweight (up to 6kW possible (BC-2)) ● Easy transition from the first setting to the second setting (auto shift function for heater ON-OFF and transition from preheating to heating) ● This power supply is classified according to the ratings of each lamp (switching SW) ● Power supply voltage 85-245V (compatible with global power sources, with stabilization circuit) ● Digital display of voltage output ● External control available as an option ★ For more details, please request materials or download the catalog ★

Company：インフリッヂ工業
Price：Other

Other heaters
Pressure Regulator

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

First Gate Co., Ltd. General Catalog

Quickly provide technological innovations in semiconductor manufacturing equipment as an import trading company.

The "First Gate Corporation Comprehensive Catalog" is the comprehensive catalog of First Gate Corporation, which engages in the import and export sales of semiconductor manufacturing equipment and inspection equipment, as well as technical support. This catalog introduces products such as semiconductor manufacturing components including "Teflon flow meters," "flow controllers," "Teflon chemical supply pumps," and "various heaters." [Contents] ■ Company Overview ■ History ■ Product Lineup *For more details, please contact us or download the catalog.

Company：ファーストゲート本社、大阪オフィス、笹目倉庫
Price：Other

Ion implantation equipment
Pressure Regulator

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Helium-specific general high-pressure gas pressure regulator CMH-B515-CV

For helium gas only

A pressure regulator for general high-pressure gases, widely usable from industrial gases to balloon production.

Company：川口液化ケミカル川口事業所
Price：Other

Other physicochemical equipment
Pressure Regulator

View product details

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

General high-pressure gas regulator (oxygen, nitrogen, argon, standard gas)

Widely usable from general high-pressure gases (oxygen, nitrogen, argon) to standard gases.

Introducing pressure regulators for general high-pressure gases handled by Kawaguchi Liquefied Chemical Co., specializing in gas, vacuum, and low-temperature equipment supply R&D.

Company：川口液化ケミカル川口事業所
Price：Other

Other physicochemical equipment
Pressure Regulator

View product details

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

High-pressure high-purity gas pressure regulator

Widely usable from high-purity gases and high-precision standard gases to semiconductor material gases.

This is an introduction to pressure regulators for high-purity gases, handled by Kawaguchi Liquefied Chemical Co., specializing in the supply of gas, vacuum, and low-temperature equipment R&D.

Company：川口液化ケミカル川口事業所
Price：Other

Other physicochemical equipment
Pressure Regulator

View product details

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

All-in-One Automatic Programming System PAL-2V

Complete all-in-one solution from ROM writing to laser stamping and appearance inspection!

The PAL-2V is a fully automatic programming system with 32 sockets, featuring two ultra-fast gang programmers, the 'MODEL516', with 16 sockets each. It allows for IC programming while simultaneously performing laser marking on devices and visual inspection. 【Details】 ○ Installed Programmers: MODEL516 (16 sockets, USB 3.0 compatible) x 2 ○ Target Devices: eMMC, NAND, Flash embedded microcontrollers, NOR Flash, Serial Flash, etc. ○ Device Handling Capacity: 800 [UPH] UPH = Units per Hour ○ Device Control: Windows 7 Ultimate 64-bit ○ User Interface: LCD panel (with touch panel functionality), keyboard, mouse *For more details, please contact us or download the PDF materials.

Company：ミナト・アドバンスト・テクノロジーズ株式会社
Price：Other

Semiconductor inspection/test equipment
Pressure Regulator

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Pressure Regulator Product List and Ranking from 51 Manufacturers, Suppliers and Companies | IPROS GMS

Pressure Regulator Manufacturer, Suppliers and Company Rankings

Pressure Regulator Product ranking