Spray Dryer Product List and Ranking from 23 Manufacturers, Suppliers and Companies

MDL-015(C)MGC-S Micro Mist Spray Dryer

MMSD MDL-015（C）MGC-S

GF Corporation's "MMSD Micro Mist Spray Dryer MDL-015 (C) MGC-S" is a small-scale spray drying device suitable for laboratories that can handle organic solvents. Among our original MMSD series, it particularly excels in validating small sample sizes by instantly generating liquids as fine particles of less than 10 microns. # Main Features of MDL-015 (C) MGC-S - Compatible with organic solvents Safe spray drying of organic solvents can be performed under a nitrogen atmosphere. It also accommodates low-boiling-point solvents, making it useful for a wide range of research and development. - Generation of single micron fine powders Equipped with a "four-fluid nozzle" that can spray the smallest droplet diameter in the industry, it produces sharp particles of single microns (up to 10um) in the dried powder. - Capable of experimental validation with small samples Suitable for validation on a small scale, allowing efficient experimentation even with small amounts of valuable samples.

Company：GF
Price：Other

Granulating Equipment
Other powder equipment
Drying Equipment
Spray Dryer

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Gas dryer

Portable hair dryer the size of a cigarette pack.

A structure that combines a NAFION® gas dryer and a desiccant canister. The gas sample flowing through the dryer only comes into contact with the NAFION tube, selectively removing moisture while preserving the gas components in the sample gas.

Company：ジャパンコントロールス「Japan Controls Co. Ltd.」東京本社
Price：10,000 yen-100,000 yen

Analytical Equipment and Devices
Spray Dryer

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Flash dryer

A drying device suitable for all powdered and granular drying!

A flash dryer is a device that performs instantaneous drying by introducing moist materials into rapidly flowing hot air, causing them to collide with the hot air while being suspended in a floating state within the drying tube. It is suitable for drying all powdery and granular materials, excluding those with adhesive properties. Due to the extremely fast drying speed of the materials, it can also be easily used for drying heat-sensitive materials. To enhance thermal conduction efficiency during the drying process, the equipment is equipped with crushing and grinding facilities, allowing for simultaneous drying and grinding. 【Features】 ■ Fast drying speed ■ Compact equipment footprint with three-dimensional arrangement possible ■ The drying process is connected by ducts, making handling during operation easy ■ Good thermal efficiency ■ Reduction in labor costs *For more details, please contact us or download the catalog.

Company：中部熱工業
Price：Other

Hot air dryer
Other drying equipment
Spray Dryer

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Disc-type spray dryer

Disc-type spray dryer suitable for various dairy products and starches!

The disk-type spray dryer does not dry the raw liquid through contact with the heated surface; instead, most of the moisture evaporates and dries within the chamber space. This particularly affects the solubility of products such as powdered milk and effectively demonstrates drying efficiency regarding raw materials and protein changes. It is possible to bring the dried product closer to the desired values to some extent. Additionally, the desired values can be achieved through concentration and formulation in the pretreatment process. The sprayed raw materials are simultaneously granulated, resulting in granulated raw materials that achieve the necessary final moisture content and bulk density. 【Features】 ■ Effective against protein changes ■ Capable of bringing dried products closer to desired values to some extent ■ Sprayed raw materials are granulated simultaneously *For more details, please contact us or download the catalog.

Company：中部熱工業
Price：Other

Other drying equipment
Spray Dryer

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Spray Dryers: SPRAY DRYER - D

Extensive Track Record: Maximize your profit with high yield & energy saving

Accumulated experience With our extensive track record and experience in installing large-scale plants with a maximum capacity of 18t/h, we are capable of realizing processes with high yield and low material loss. Energy saving & Small footprint Energy can be saved by exhaust heat circulation system. A variety of our original technologies are available to save your footprint without compromising the capacity. Atomization system Rotary atomizers, Two-fluid nozzles, S-type two-fluid nozzles, Pressure nozzles, and Ultrasonic nozzles are available. System selection Open-cycle systems, Closed-cycle systems and Dual systems are available. Flexible design A wide variety of options are available including powder collection, heat sources, cleaning systems, and controls. Global network We carry out projects globally by collaborating with our official engineering partners in each region under our quality management system.

Company：PRECI Co., Ltd.
Price：Other

others
Spray Dryer

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Research and development use / small-scale production compatible spray dryer

A spray dryer that instantly turns liquid raw materials into powder. We offer a wide range of small and medium dryers for research and development, as well as small-scale production.

Particles dried by a spray dryer are nearly spherical and have excellent flowability, making them easy to dissolve in water for applications such as food and pharmaceuticals, while also allowing for the production of high-density molded products in electronic materials, powder metallurgy, and fine ceramics. ~Features~ 〇 Over 75 years of trust and achievements Since 1950, more than 3,000 units have been sold worldwide. We supply various universities, research institutions, powder manufacturing facilities, and factories. 〇 Ability to choose spraying methods according to purpose Three types of methods can be selected: 1. Rotary atomizer Optimal for producing particles of 5–25μm. 2. Two-fluid nozzle (co-current or fountain type) Optimal for producing heat-sensitive particles of 5–25μm. Can also be used for high-viscosity materials. 3. Pressure nozzle Suitable for products with larger particle sizes (15–80μm) that require heat resistance. 〇 Support for future mass production systems We offer a wide range of products to meet diverse needs.

Company：GEAジャパン本社　
Price：Other

Other physicochemical equipment
Spray Dryer

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Spray Dryer "Spray Dryer for Pharmaceutical Manufacturing"

Expertise and extensive experience in process design.

GEA Niro has been supplying spray dryers to the pharmaceutical manufacturing industry worldwide for over 75 years. The expertise of GEA Niro in drying equipment plants and processes is based on extensive experience and high research and development capabilities. The equipment supplied so far ranges from spray dryers for research and development to production equipment that meets cGMP standards and continuous production facilities. Based on a proven track record of delivering numerous plants around the world and conducting over 20,000 tests, we have established a solid foundation of specialized technology and know-how that meets the needs of the pharmaceutical manufacturing industry. 【Features】 ○ Improvement of bioavailability ○ Control of release time and masking of taste ○ Manufacturing in an aseptic environment ○ Production of inhalation agents For more details, please contact us or download the catalog.

Company：GEAジャパン本社　
Price：Other

Drying Equipment
Spray Dryer

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Okawahara Manufacturing Co., Ltd. Company Profile

Contributing to society with engineering skills that leverage know-how! Expanding into Asia and Europe.

Okawara Manufacturing Co., Ltd. has contributed to the food and chemical industries with a focus on drying technology since its establishment, and in recent years, it has been active in even broader fields, including the environmental sector. Our efforts to strengthen engineering based on manufacturing know-how are advancing not only in the domestic market but also in overseas markets, particularly in Europe and Asia. 【Business Activities】 ■ Drying ■ Resource Recovery ■ Sterilization ■ Containment ■ Concentration, etc. *For more details, please refer to the PDF materials or feel free to contact us.

Company：大川原製作所東京営業所
Price：Other

Drying Equipment
Spray Dryer

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Multi-Stage Spray Dryer "PJ-MiniMax"

Space-saving! High functionality! A multi-stage spray dryer that solves various issues.

The multi-stage spray dryer "PJ-MiniMax" is a multi-stage spray dryer developed to solve various issues associated with conventional spray dryers. A spray dryer is a device that dries liquids and turns them into powder, but we also offer drying equipment for solids such as beer lees and okara. By adopting a rectangular ductless structure for the chamber shape, we have achieved significant space savings. The use of a dual hot air method enables delicate drying control that was difficult with conventional dryers. Compared to traditional spray dryers, it features a compact design and can be offered at an unbeatable low price. Please feel free to contact us if you have any inquiries regarding drying equipment or technology. 【Features】 ■ Compatible with small lots and a variety of products ■ Secondary drying mechanism that can operate with a single-stage feel ■ An astonishing evaporation capacity 4 to 5 times greater than conventional machines ■ Powder control through a dual hot air control device ■ Fully automatic CIP system included as standard, etc. *For more details, please refer to the catalog or feel free to contact us.

Company：パウダリングジャパン
Price：Other

Other machine tools
Powder Supply Device
Spray Dryer

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

【Equipment Introduction】Spray Dryer

Minimized quality degradation due to heating! Thorough management of hygiene! Dedicated clean room for powdered products (cleanliness: Class 100,000)!

Our company has a dedicated clean room for powder products adjacent to the spray dryer, allowing for hygienic filling of powder products. 【Features】 - Dedicated clean room for powder products - Minimal quality degradation due to heating through rapid drying and powdering - One-stop support from condition examination, test production, to extraction, concentration, and drying We are also focusing on the development of ethical products and supporting food waste reduction, so we can assist with customer requests and concerns such as: ■ I don't know how to utilize surplus non-standard raw materials in large quantities... ■ I want to reduce food waste! ■ I want to reduce waste generated from food factories, but where should I consult? Please feel free to reach out to us for the concentration and drying of liquid raw materials.

Company：Hamari Nutritional Sciences Corporation Food Ingredients Department
Price：Other

Food ingredients (powder)
Spray Dryer

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Spray Dryer [Contract Processing] *Proven track record with 300 companies!

Attention companies without a spray dryer and those wanting to try small quantities! We also respond to requests for sample production for sales activities!

We have been engaged in the development, manufacturing, processing, and sales of various powders through the production of inorganic pigments. In particular, since the introduction of our equipment in 1987, we have provided contract processing for powdering and granulating chemical products using a spray dryer, serving over 200 customers and responding to diverse requests. Our company strives to achieve a quality that satisfies our customers through liquid preparation and granulation technology with spray dryers, making daily efforts. 【For customers with the following challenges or concerns】 ■ No spray dryer in-house ■ Want to test what kind of powder can be produced with a spray dryer in small quantities ■ Need to accommodate a variety of products in small quantities ■ Production volume is insufficient for in-house manufacturing ■ Cleaning of equipment and factory is cumbersome ■ Need samples for sales activities immediately Over 300 types of manufacturing achievements. Zero contamination complaints since the start of operations in 1987! *For more details, please download the materials or contact us.

Company：日華化成
Price：Other

Chemicals
Other powder equipment
Ceramics
Spray Dryer

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Nichiwa Chemical's spray drying technology

Stable production of granules around 50μm in a single process! We can handle cyclodextrin encapsulation.

"Spray drying" is a technology that instantly dries a liquid by spraying it in a drying chamber to create fine droplets, utilizing the surface tension of water to produce spherical, highly flowable granules. In a spray dryer, slurry is directly pumped into the drying chamber and atomized, allowing for the stable production of granules with an average size of around 50μm in a single process. This method stabilizes moisture, particle size, and bulk density, while also reducing dust generation. Additionally, it is possible to microencapsulate liquids using the inclusion effect of cyclodextrin, turning them into powder. [Features] - Spherical and highly flowable, making handling easy and reducing dust generation. - Short drying time allows for the drying of heat-sensitive raw materials. - By preparing a slurry with cyclodextrin (CD) encapsulating the liquid in water and drying it with a spray dryer (SD), powder can be produced in a single process. - Heat-sensitive liquids, such as fragrances, can retain their aromatic components through the inclusion effect of CD and the low-temperature drying of SD. *For more details, please refer to the PDF document or feel free to contact us.*

Company：日華化成
Price：Other

Processing Contract
Other processing machines
Spray Dryer

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

[Case Study of Problem Solving] Small-quantity, Diverse Production of Ceramic Granules

Just prepare the raw powder and additives! We can handle everything from formulation to granulation and classification in a one-stop service.

At Nichika Chemical Co., Ltd., we manufacture small quantities of a wide variety of ceramic granules for press molding. We can handle production from several dozen kilograms to several tons using medium-sized machines and mass production equipment. We can also take on tasks from ball mill mixing. In the past, we faced challenges such as "we manufacture in-house but have dedicated machines that do not allow for diversification" and "we can develop prototypes in small quantities but lack equipment for mass production." Our company can provide a one-stop service from slurry preparation with a nylon barrel mill to drying granulation with a spray dryer (SD) and screening classification. Customers only need to prepare the raw powder and additives. 【Benefits】 ■ Quick diversification into a wide variety of products without incurring additional equipment costs ■ We have spray dryer testing machines and small mills for rapid development *For more details, please refer to the PDF document or feel free to contact us.

Company：日華化成
Price：Other

Processing Contract
Other powder equipment
Other processing machines
Spray Dryer

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Basic Knowledge of Spray Drying Special Edition Frequently Asked Questions [Technical Materials Provided]

"What is spray drying? What is the difference from freeze drying?" Answers to many such questions!

This document is a "Basic Knowledge of Spray Drying - Special Edition." It includes various questions such as "What kind of company is it?", "Can you conduct tests?", "I would like to purchase spray-dried powder," and "Can you do spray drying for food?" Nikka Chemical Co., Ltd. has been operating with five spray dryers in Osaka and three in Fukui since July 2022. If you have any concerns about spray drying, please feel free to contact us. [Contents (partial)] - Are you a manufacturer of equipment? - Can you perform spray drying with organic solvent systems? - Can I receive test data? - I would like to enter into a confidentiality agreement for information disclosure; is that possible? - Is it possible to accept contracts for a limited period? Even as a temporary solution until we install our own equipment? *For more details, please refer to the PDF document or feel free to contact us.

Company：日華化成
Price：Other

Drying Equipment
Spray Dryer

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Organic solvent-compatible spray dryer lab equipment is now operational!

Introducing the organic solvent-compatible spray dryer "Lab Machine CL-8"! Information on contract testing to meet pre-production testing needs!

We have started the operation of the lab equipment "CL-8 (manufactured by Okawara Kako Ki)" that can safely spray-dry organic solvent-based liquids under a nitrogen gas flow! The specifications of the device indicate an ethanol evaporation rate of 4 kg/h at a hot air temperature of 140°C. While there is a strong demand for organic solvents, there are extremely limited places where testing, the first step in production, can be conducted, leading to difficulties in development. We have received feedback regarding this issue through inquiries on our website and during exhibitions every year. To respond to this persistent need, we will begin operations in late January 2025. 【Solving these challenges and concerns】 ■ We want to safely dry raw materials that cannot be processed with water-based methods. ■ We lack spray-drying equipment and know-how, making testing and prototyping impossible. ■ We want to test what kind of powders can be produced with a spray dryer in small quantities. We are anticipating drying and granulating non-aqueous ceramics (such as aluminum nitride and silicon carbide), battery materials, resins, etc., but we will accept a wide range of materials and applications without imposing strict limitations. *For more details, please refer to the PDF document or feel free to contact us.

Company：日華化成
Price：Other

others
Spray Dryer

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

SD Scientific Equipment

We have various "testing equipment" and "purification equipment" for conducting different types of tests!

We would like to introduce the production equipment we have. We possess a "spray dryer" that can continuously dry, as well as "testing equipment" for conducting various tests, and "purification equipment" that filters wastewater generated during equipment cleaning over time before discharging it. Please feel free to contact us when needed. 【Equipment Owned】 ■ Spray Dryer (for production) - Sprays the raw liquid into a hot air stream using a micronization device for continuous drying. ■ Testing Equipment - Conducts various tests. ■ Purification Equipment - Filters wastewater generated during equipment cleaning over time before discharging. *For more details, please refer to the PDF document or feel free to contact us.

Company：SD科学東京事務所
Price：Other

Drying Equipment
Testing Equipment and Devices
Wastewater/wastewater treatment equipment
Spray Dryer

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

About SD science spray dryers

We adopt the 'rotary atomizer method' and the 'two-point collection method'.

Here is a brief introduction to the "spray dryer" used in SD science. We adopt the "rotary atomizer method" as the spraying method. Compared to other spraying methods, it is easier to control the particle size, allowing us to obtain products with uniform particle sizes. Additionally, we use a "two-point collection method" for product collection, recovering from both below the drying chamber and below the cyclone. This results in a good overall product recovery rate and eliminates the need for mixing in subsequent processes, thereby increasing production efficiency. We also welcome factory tours, so please feel free to reach out to us. 【Adopted Methods】 ■ Rotary Atomizer Method ■ Two-Point Collection Method *For more details, please refer to the PDF materials or feel free to contact us.

Company：SD科学東京事務所
Price：Other

Drying Equipment
Processing Contract
Spray Dryer

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

FGA Series Fluid Granulation Spray Dryer for the Feed Industry

A special model that applies spray dryer technology to respond to changes in the types and physical properties of liquid raw materials!

This device is equipped with a fluidized bed granulator with a stirring mechanism built into the bottom of the spray dryer drying chamber, and further combines a fluidized bed drying and cooling unit for finishing drying and cooling of the product, allowing for the continuous granulation (pellet) of products directly from liquid raw materials. ● For more details, please contact us or download the catalog to view.

Company：大川原化工機
Price：Other

Granulating Equipment
Drying Equipment
Spray Dryer

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

FGA Series Fluid Granulation Spray Dryer

Continuous production of granulated products directly from liquid raw materials is possible! A spray dryer equipped with a fluidized bed and stirring mechanism.

This device is equipped with a fluidized bed granulator with a stirring mechanism built into the bottom of the spray dryer drying chamber, and further combines a fluidized bed drying and cooling device for finishing drying and cooling of the product, allowing for the continuous granulation (pellet) of products directly from liquid raw materials. ● For more details, please contact us or download the catalog to view.

Company：大川原化工機
Price：Other

Granulating Equipment
Drying Equipment
Spray Dryer

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

L/OC Series General-purpose Spray Dryer for the Food Industry

For research and development or production! Liquid raw materials are sprayed into hot air to instantly produce flowable powder products.

The L/OC series is our most basic spray dryer. It has a wide lineup ranging from test machines to small-scale production machines. For more details, please contact us or download and view the catalog.

Company：大川原化工機
Price：Other

Drying Equipment
Granulating Equipment
Spray Dryer

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

L/OC Series General-purpose Spray Dryer for the Ceramics Industry

Ideal for food, ceramics, chemical products, and pharmaceuticals! We have developed a series for both research and production use.

The L/OC series is our most basic spray dryer. It has a wide lineup ranging from test machines to small-scale production machines. For more details, please contact us or download the catalog to take a look.

Company：大川原化工機
Price：Other

Drying Equipment
Granulating Equipment
Spray Dryer

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Closed Spread Dryer CL/COC Series

Since it is a sealed type, spray drying with organic solvents is also safe! A closed-type spray dryer that circulates nitrogen gas.

Spray drying/cooling is possible in an inert atmosphere. Instead of the normally used air atmosphere, nitrogen gas is circulated for spray drying (or cooling) in an inert atmosphere. Not only can the product be processed, but solvent recovery can also be performed. For more details, please contact us or download and view the catalog.

Company：大川原化工機
Price：Other

Drying Equipment
Granulating Equipment
Spray Dryer

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

For the electronics-related industry: "Spray Dryer" for the production of particles in the sub-micron class.

Capable of continuously producing a large amount of fine particles! From research and development twin jetters to production micro granulators.

This is a spray dryer equipped with a "twin jet nozzle" developed by our company, which produces fine particles of 10 micrometers or less with a small amount of air. In conventional spray dryers, producing fine particles of 10 micrometers or less could only be achieved by reducing the processing volume or lowering the solid concentration, but we have resolved these constraints, enabling the mass production of fine particles in the few micrometer range. ● For more details, please contact us or download and view the catalog.

Company：大川原化工機
Price：Other

others
Other laboratory equipment and containers
Spray Dryer

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Nitrogen Gas Sealed Circulation Type 'CNL-3' for the Pharmaceutical Industry

Ideal for screening in the early stages of material development! Closed-loop spray dryer suitable for small sample production.

The nitrogen gas sealed circulation type "Spray Dryer CNL-3" has miniaturized the closed system technology of Okawara Kako. It is suitable for screening in the early stages of material development. ● For more details, please contact us or download the catalog to view.

Company：大川原化工機
Price：Other

Drying Equipment
Granulating Equipment
Spray Dryer

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Nitrogen Gas Sealed Recirculation Type 'CNL-3' for the Electronics Industry

A closed-loop spray dryer ideal for small-scale sample production for the electronics-related industry.

The nitrogen gas sealed circulation type "Spray Dryer CNL-3" has miniaturized the closed system technology of Okawara Kako. It is suitable for screening in the early stages of material development. ● For more details, please contact us or download the catalog to view.

Company：大川原化工機
Price：Other

Drying Equipment
Granulating Equipment
Spray Dryer

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Nitrogen Gas Sealed Circulation Type for Research and Development "CNL-3"

A closed-loop spray dryer that is ideal for small-scale sample production for research and development purposes.

The nitrogen gas sealed circulation type "Spray Dryer CNL-3" has miniaturized the closed system technology of Okawara Kako. It is suitable for screening in the early stages of material development. ● For more details, please contact us or download the catalog to view.

Company：大川原化工機
Price：Other

Drying Equipment
Granulating Equipment
Spray Dryer

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Spray cooler for those who want to manufacture spherical particles.

For creating spherical particles from solid materials! A spray cooling granulation device that can set product sizes from a few microns to several thousand microns.

When a solid is heated above its melting point, it melts and becomes liquid. By spraying this, it is transformed into many fine particles. By applying cold air to these particles and solidifying them, spherical products are obtained. By selecting the spray conditions, the product size can be set in the range of several microns to several thousand microns. Additionally, by mixing another substance that serves as a core into the melted material and applying the same process, microencapsulation can also be achieved. ● For more details, please contact us or download and view the catalog.

Company：大川原化工機
Price：Other

Granulating Equipment
Other physicochemical equipment
Spray Dryer

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Spray dryer for microparticle production

For the production of fine particles such as battery materials, ceramics, chemical products, and new materials! Spray dryer equipped with a twin jet nozzle.

The RL series is a reasonably priced and user-friendly spray dryer developed for widespread use in the field of new materials (secondary battery materials, fine ceramics, fine chemicals) for the production of fine particles. For more details, please contact us or download the catalog to view.

Company：大川原化工機
Price：Other

Drying Equipment
Granulating Equipment
Spray Dryer

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Spray Dryer Product List and Ranking from 23 Manufacturers, Suppliers and Companies | IPROS GMS

Spray Dryer Manufacturer, Suppliers and Company Rankings

Spray Dryer Product ranking