Thermal spraying - メーカー・企業62社の業務用製品ランキング

[Technical Introduction] Surface Modification Supporting Power Generation Equipment

We will introduce our achievements in factory construction and on-site work for large boiler panels.

In power generation facilities, we primarily perform overlay welding and thermal spraying on boiler tubes. For factory construction, we provide high-quality products through automatic welding and automatic thermal spraying. In particular, we are capable of large-scale thermal spraying. With automatic thermal spraying, we can accurately trace shapes like pipes using robots. In on-site thermal spraying work, we have introduced large dust collectors, which improve the furnace environment and significantly shorten construction time through continuous work. There are many applications for power generation facilities, including pulverized coal-fired boilers and heavy oil-fired boilers, so please feel free to contact us when needed. 【Features of Thermal Spraying】 ■ Capability for large-scale work ■ Automatic thermal spraying ■ Introduction of large dust collectors *For more details, please refer to the PDF materials or feel free to contact us.

企業：大阪富士工業
価格：Other

Processing Contract
Thermal spraying

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

Surface modification technology: thermal spraying

Applicable to large products as well as small products! Introduction of a surface modification technology with few dimensional shape constraints.

"Thermal spraying" is a surface modification technology that creates a coating by accelerating and colliding material particles that have been heated to a molten or semi-molten state. Compared to plating and vapor deposition, the film formation speed is fast, and it is possible to spray a variety of materials (metals, cermets, ceramics, etc.). Our company offers surface modification tailored to the operating conditions of manufacturing sites, such as for corrosive environments, wear environments, and heat resistance purposes. If you have any concerns, please feel free to contact us. 【Features】 ■ Capable of spraying a variety of materials (metals, cermets, ceramics, etc.) ■ Capable of spraying diverse materials (metals, ceramics, carbon materials, etc.) ■ Applicable to both large and small products, with few dimensional shape constraints ■ Low heat input to the product during spraying (approximately below 200°C) ■ Faster film formation speed compared to plating and vapor deposition *For more details, please refer to the PDF document or feel free to contact us.

企業：大阪富士工業
価格：Other

Processing Contract
Thermal spraying

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

Thermal spraying method "Arc spraying"

It has excellent adhesion to the substrate because it is melted at high temperatures.

Thermal Spraying Method "Arc Spraying" is a process that generates an arc discharge between two metal wires, melting the wires with the discharge energy, and spraying atomized materials onto the substrate using compressed air to form a coating. The thermal spray materials are limited to those with excellent electrical conductivity, but they have superior adhesion to the substrate due to being melted at high temperatures. 【Features】 ○ Can perform thermal spraying on a wide range of substrates, allowing for a broad selection of thermal spray materials ○ Does not affect the heat of the substrate ○ No dimensional restrictions on the substrate ○ Processing is possible only in the required areas ○ On-site construction is possible For more details, please contact us or download the catalog.

企業：シンコーメタリコン
価格：Other

Processing Contract
Thermal spraying

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

Shinko Metalicon Co., Ltd. Thermal Spray Method Comprehensive Catalog

Shinko Metallico has all the thermal spraying processes.

Various industrial machines and systems need to be designed to withstand extremely harsh environments and conditions. In this sense, "thermal spraying" is an indispensable surface modification technology for product performance. Thermal spraying technology can be categorized into two types: one aimed at protecting substrates such as steel structures against corrosion and environmental barriers for chemical equipment, and the other focused on functional thermal spraying for wear resistance, thermal insulation, and electrical insulation in various industrial fields. Thermal spraying is a surface modification technology that involves melting and spraying materials such as metals, ceramics, and cermets using various heat sources to form functional coatings on the substrate surface. 【Features】 - Capable of thermal spraying on a wide range of substrates with a broad selection of spraying materials. - Does not affect the heat of the substrate. - No dimensional limitations on the substrate. - Processing is possible only in the required areas. - On-site construction is possible. For more details, please contact us or download the catalog.

企業：シンコーメタリコン
価格：Other

Processing Contract
Thermal spraying

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

[Spraying Case] Wear Resistance

There are various types of wear, including abrasive wear and adhesive wear.

Thermal spraying is a surface modification technology that uses various heat sources to melt and spray materials such as metals, ceramics, and cermets onto a substrate surface to form functional coatings. There are various types of wear, including "abrasive wear," where the surface is worn away; "adhesive wear," which occurs when two identical materials rub against each other, causing molecular bonding and shear, resulting in wear particles that detach; "fatigue wear," which arises from repeated application of load and friction; and "corrosive wear," which occurs in steel when oxygen adheres to the surface, triggering oxidation reactions that produce rust, leading to wear. [Types] ○ Abrasive wear ○ Adhesive wear ○ Fatigue wear ○ Corrosive wear For more details, please contact us.

企業：シンコーメタリコン
価格：Other

Processing Contract
Thermal spraying

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

No worries about thermal distortion at processing temperatures around 100℃! Leave the thermal spraying issues to us!

We will propose the best plan that matches the customer's challenges and needs.

Thermal spraying is a surface modification technology that uses various heat sources to melt and spray materials such as metals, ceramics, and cermets onto a substrate surface to form functional coatings. For anything related to thermal spraying and surface treatment, please consult Shinko Metallicon. Our sales staff will listen to your challenges and needs and propose the best plan in response. We analyze the purpose of machine use and the operating environment in detail to design the future of that machine. Shinko Metallicon will continue to strive to solve various problems. 【Features】 ○ Listening ability: Wide, deep, and persistent inquiry ○ Planning ability: Designing the optimal plan ○ On-site capability: Never say no. Follow through. ○ Deadline responsiveness: All employees commit to meeting deadlines ○ Service capability: Engaging with a spirit of hospitality For more details, please contact us.

企業：シンコーメタリコン
価格：Other

Processing Contract
Thermal spraying

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

For information on thermal spraying, visit "thermal-spraying.com".

A group of specialists in thermal spraying. We handle various processing from pre-treatment to finishing!

At the thermal spraying processing website, we cater to the applications and purposes of thermal spraying, including wear resistance, buildup, hardness enhancement, corrosion protection, weather resistance, chemical resistance, heat resistance, thermal insulation, heat shielding, imparting electrical properties, infrared, cost reduction, and restoration of repairs and dimensional recovery.

企業：新潟メタリコン工業
価格：Other

Surface treatment contract service
Thermal spraying

製品を詳しく見る

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

Wear-resistant super-hard thermal spray material 'SURPREX W2007'

It is a cermet thermal spray material that excels in corrosion resistance and wear resistance, particularly in slurry erosion resistance.

This is a thermal spray material made of WC/20wt%CrC/7wt%Ni produced by the granulation and sintering method. By strictly managing particle size and granule strength, it achieves spitting prevention and excellent adhesion efficiency, resulting in a thermal spray coating that is resistant to corrosion and has outstanding wear resistance. W2007 has excellent wear resistance and wet abrasion resistance (slurry erosion resistance). Additionally, it has superior oxidation resistance compared to other WC cermets. However, its toughness is lower than that of other cermet materials, so caution is needed when used in environments subjected to mechanical impact. [Application Examples] Leveraging its high corrosion resistance and wear resistance, it is used in chemical plant components and other applications. Application examples: - Petrochemical plant components - Film rolls - Paper-making rolls - Steel plate transport rolls - Calendar rolls - Pump components, etc. [Message] At Fujimi, we manufacture and sell many cermet materials in addition to W2007, and we can also prototype powders with adjusted WC particle size and composition according to customer requests. If you have any questions or requests regarding cermet materials, please feel free to contact us. *For more details about the products, please refer to the catalog.

企業：フジミインコーポレーテッド
価格：Other

roller
Thermal spraying

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

Wear-resistant, abrasion-resistant super-hard thermal spray material 'SURPREX W1004'

It is a cermet thermal spray material with excellent balance of corrosion resistance, wear resistance, and toughness.

This is a WC/10wt%Co/4wt%Cr thermal spray material produced by the granulation-sintering method. By strictly controlling particle size and granule strength, it achieves spitting prevention and excellent adhesion efficiency, while obtaining a thermal spray coating with a superior balance of wear resistance, corrosion resistance, and toughness. W1004 has excellent wear resistance and wet wear characteristics (slurry erosion resistance), as well as outstanding cavitation erosion resistance. In terms of coating properties, it exhibits characteristics intermediate between 'SURPREX W12' and 'SURPREX W2007'. [Application Examples] Leveraging its high corrosion resistance, wear resistance, slurry erosion resistance, and cavitation erosion resistance, it is used in a wide range of fields such as steelmaking, papermaking, and hydraulic machinery. Application examples include: - Turbine blades - Water turbine blades - Pump components - Plungers - Papermaking coating rolls, etc. [Message] At Fujimi, we manufacture and sell many cermet materials in addition to W1004, and we can also prototype powders with adjusted WC particle size and composition according to customer requests. If you have any questions or requests, please feel free to contact us. *For product details, please refer to the catalog.

企業：フジミインコーポレーテッド
価格：Other

roller
Thermal spraying

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

Shock-resistant super-hard thermal spray material 'SURPREX W2000X Series'

It is a cermet thermal spray material with excellent wear resistance and impact resistance.

This is a WC/CrC/Ni-based cermet thermal spray material produced by the granulation and sintering method. By strictly controlling particle size and granule strength, we achieve spitting prevention and excellent adhesion efficiency, resulting in a thermal spray coating with outstanding wear resistance and impact resistance. The W2000X series is highly tough compared to conventional cermet thermal spray materials and possesses extremely excellent impact resistance. When compared to typical WC/12wt%Co coatings, it has demonstrated more than double the durability in steel ball drop impact tests. [Application Examples] Leveraging its high impact resistance and toughness, it is used in a wide range of fields including construction, civil engineering, and machinery. Application examples: - Cutting bits - Construction machinery parts - Various rollers - Crusher parts - Various screws - Coater blades, etc. [Message] At Fujimi, we manufacture and sell many cermet materials beyond the W2000X series, and we can also prototype powders with adjusted WC particle size and composition according to customer requests. If you have any questions or requests regarding cermet materials, please feel free to contact us. *For product details, please refer to the catalog.

企業：フジミインコーポレーテッド
価格：Other

roller
Thermal spraying

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

Laser Engraved Ceramic Roll

Worldwide common quality control! Suitable for high line counts and special engravings.

The "Laser Engraved Ceramic Roll" has a cross-sectional hardness of Hv300 1150 or higher, making it highly hard, resistant to acids and alkalis, and excellent in corrosion resistance. With thorough quality control in film formation, it offers excellent reproducibility and allows for engraving in areas that can only be achieved with a dense film. Additionally, it can accommodate hard fillers and ensures stable production with water-based coatings. 【Features】 ■ Dense ceramic thermal spray coating ■ Suitable for high line counts and special engravings ■ Worldwide common quality control ■ Excellent wear resistance ■ Superior maintainability *For more details, please refer to the PDF document or feel free to contact us.

企業：Linde AMT Japan
価格：Other

Coating Agent
Processing Contract
Surface treatment contract service
Thermal spraying

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

Maintenance & Relocation

Keep your T-Dai's lip and manifold as good as new! Regular maintenance is essential!

We would like to introduce the "Maintenance & Relocation" services provided by Axmolding Co., Ltd. The lips and manifolds of T-dies can develop scratches and dents with prolonged use. Regular maintenance is necessary to maintain the quality and precision of film products. Services include "lip polishing," "die resin cleaning," "heater replacement," and "control panel PLC updates," among others. We restore the lips and manifolds of T-dies to like-new condition. [Overview (excerpt)] ■ Lip polishing ■ Polishing ■ Replating ■ Partial plating ■ Rust removal *For more details, please refer to the PDF document or feel free to contact us.

企業：アクスモールディング
価格：Other

Other contract services
Thermal spraying

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

AeroTech Corporation Business Introduction

Leave thermal spraying and grinding processing to us!

AeroTech Co., Ltd. is a company that develops a wide range of businesses, starting with contract work for thermal spraying and grinding processing. Through meticulous marketing, we grasp market needs in real-time and deliver high-quality products to the world as much as possible. We will continue to challenge new possibilities with our technological capabilities backed by extensive experience. 【Business Activities】 ■ Contract work for thermal spraying and grinding processing ■ Contract work for build-up welding and metal surface treatment processing (hard chrome plating, etc.) ■ Contract work for thermal spraying technology guidance ■ Sales of thermal spraying powder materials ■ Contract work for evaluation testing of thermal spray coatings, etc. *For more details, please refer to our catalog or feel free to contact us.

企業：エアロテック
価格：Other

Other contract services
Thermal spraying

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

Alumina + tungsten coating for [improved thermal efficiency] <processing example>

We have ultra-high temperature heat treatment furnaces! We will address your challenges with our years of heat treatment technology. Leave the coating and brazing of metals and ceramics to us!

We would like to introduce some coating examples. This one is tungsten coated with alumina (Al2O3). To enhance thermal efficiency, we have further coated the alumina coating with (alumina + tungsten). This is a component inside the cathode used in electric propulsion systems for small satellites, but it seems to be used in other applications as well. Our company has a well-equipped heat treatment furnace, and in addition to coating, we respond to various requests such as brazing and material development. We also accept commissioned processing from research and development, so if you have any concerns, please feel free to consult us first. ◆ We will propose solutions utilizing our heat treatment furnace tailored to your needs: - Coating - Brazing - Functional material development - Sintering - Residual stress removal - Crystal grain size control - Oxide removal - Contamination removal - Degassing - De-greasing ...and more.

企業：岳石電気
価格：Other

Contract manufacturing
Thermal spraying

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

Surface Treatment Technology: Five Features and Seven Effects of Kodama's Thermal Spraying Technology

Extending the lifespan of production equipment parts! Cost reduction! Extending the lifespan of parts! Proposing the highest level of coating to achieve better results!

At Kodama Co., Ltd.'s thermal spraying department, we rapidly form coatings on various substrate materials. There is minimal distortion of product materials due to thermal effects, and we can impart many functions through <5 features and 7 effects>, leading to cost reduction and improved productivity. <Features> 1. Coating formation on various substrate materials 2. A wide variety of coating types (metals, ceramics, etc.) 3. Coating formation limited to specific areas of the substrate 4. Minimal distortion of product substrates due to thermal effects 5. Fast coating formation speed <Spraying Effects> ■ Wear resistance ■ Heat resistance ■ Corrosion resistance ■ Weather resistance ■ Electrical insulation ■ Electrical conductivity ■ Generation of far-infrared rays *For more details, please refer to the PDF or feel free to contact us.

企業：コダマ
価格：Other

Surface treatment contract service
Processing Contract
Thermal spraying

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

HVOF thermal spraying (High Velocity Oxygen Fuel spraying)

It is a super hard coating technology that possesses a dense film characteristic with strong adhesion to the substrate, resulting in extremely high wear resistance and corrosion resistance.

"HVOF thermal spraying (High Velocity Oxygen Fuel spraying)" is a super hard thermal spray coating adapted for wear and corrosion resistance. Due to the smooth surface of the coating, it is easy to achieve a super mirror finish, and a thick film formation is also realized. The extremely high particle velocity (500–800 m/s) produces a coating with very high density and low porosity. Additionally, because the material is fed at ultra-high speed, the time it is exposed to the flame is minimized, allowing for the reduction of oxidation and alteration to a minimum. 【Features】 ■ High density ■ High adhesion ■ Oxidation and alteration suppression ■ Surface smoothness *For more details, please refer to the PDF document or feel free to contact us.

企業：コダマ
価格：Other

Surface treatment contract service
Processing Contract
Thermal spraying

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

[Product Example] Wear-resistant and restorative coating for equipment and parts

By performing thermal spray coating, it is possible to extend the lifespan, allowing for parts replacement and cost reduction!

The thermal spraying technology, a type of surface treatment, is expected to create added value through cost reduction by extending the lifespan of production equipment parts and restoring shapes, as well as by providing new functionalities. Our company has numerous achievements in enhancing the wear resistance of components such as pouring cups and sand conveying screws, as well as in restoring dimensions of motor shafts. We offer custom specifications tailored to product needs, accommodating various materials, dimensions, shapes, and applications, so please feel free to contact us. 【Product Examples】 ■ Pouring Cups ■ Shot Blades ■ Sand Conveying Screws ■ Casting Sand Mixing Mixer Blades ■ Paddles *For more details, please refer to the PDF document or feel free to contact us.

企業：コダマ
価格：Other

Surface treatment contract service
Processing Contract
Thermal spraying

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

Thermal spray coating (wear resistance, shape restoration, creation of new functions)

This is a surface treatment technology that addresses issues related to machinery and production equipment through a variety of parameters involving heat sources (thermal spray devices), thermal spray materials, thermal spray coatings, and substrates.

"Thermal spraying" is a type of surface treatment technology that involves melting or softening a spray material (such as metals or ceramics) adjusted according to the purpose, using a heat source like electricity or gas, and then atomizing it into fine particles that collide with the surface of the target object. This process causes the flattened particles to solidify and accumulate, forming a coating. It is possible to impart many functions, such as extending the lifespan of production equipment parts, reducing costs through shape restoration, and improving productivity by modifying the surface of materials. We have numerous examples of how our thermal spraying technology has proposed and solved various challenges faced by our customers. Please start by requesting a prototype. [Features] - High degree of freedom in material selection - High degree of freedom in coating design - Ability to choose thermal spraying processes according to material and coating design - Capability to form coatings on various substrates and shapes - Custom specifications tailored to product needs *For more details, please refer to the PDF materials or feel free to contact us.

企業：コダマ
価格：Other

Surface treatment contract service
Processing Contract
Thermal spraying

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

[Data] Thermal Spray Case Photos

Effective for extending the lifespan of parts such as wear resistance, corrosion resistance, and dimensional restoration! We will introduce various thermal spraying examples with photos.

At Kodama Co., Ltd., we conduct "thermal spraying," which is expected to achieve cost reductions through "prolonging the lifespan" and "shape restoration" of production equipment, as well as "value creation" by adding new functionalities. In this document, we introduce examples of various products that have been coated, including V pulleys, bearing supports, flanges, and soldering pots. The effects obtained through thermal spraying technology are diverse, including wear resistance, dimensional restoration, and corrosion protection. [Featured Examples (Excerpt)] - V Pulley - Bearing Support - Flange - Drum Thermal Spraying - Swivel Joint *For more details, please refer to the PDF document or feel free to contact us.

企業：コダマ
価格：Other

Surface treatment contract service
Processing Contract
Thermal spraying

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

Digest Edition: Thermal Spray Coating Technology Handbook, 1st Edition

A comprehensive overview of thermal spraying technology (surface treatment methods) that you can’t ask about now!

This is a technical handbook about thermal spraying. - I've heard of thermal spraying but don't know much about it. - What are the differences compared to other surface treatments? - What applications can it be used for? I want to design something like this; can thermal spraying solve it? We introduce a wealth of basic knowledge about thermal spraying and the services our company offers! We hope you find it useful for your future projects!

企業：コダマ
価格：Other

Other machine elements
Thermal spraying

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

Simultaneously achieving low-frequency noise reduction and lightweight, compact design [Low-frequency magnetic shielding thermal spraying]

Coating the resin housing prevents low-frequency noise! It features a thermal spray coating that is also resistant to impact and thermal shock!

There are sheet materials and paints for low-frequency magnetic countermeasures, but with thermal spraying, you can achieve complete coverage without concerns about peeling or noise leakage! This thermal spray coating is specialized for low-frequency magnetic shielding and is also resistant to impact and thermal shock. We will provide the optimal coating by making specification changes based on product needs, including cost and effectiveness. ■ To prevent malfunctions caused by low-frequency magnetic fields from motors ■ For resin housings of automotive equipment ■ For electromagnetic wave countermeasures in medical devices ■ To enhance the efficiency of wireless power transmission systems ■ To improve the communication distance of RFID tags It exhibits a magnetic shielding effect of approximately 10 to 50 dB in the frequency range of 500 Hz to 100 kHz (magnetic shielding results based on the KEC method). 【Coating Features】 - Spray coating method allows for film formation on complex-shaped products. - There are no concerns about peeling or electromagnetic wave leakage like with sheet materials. - By applying a coating to resin, it simultaneously achieves low-frequency noise reduction and lightweight, compact design. ★ For a limited time, we are offering a free handbook on low-frequency magnetic shielding coatings! ★ → For details, please download the PDF data from the link below.

企業：コダマ
価格：Other

Anti-static products
IC tag
Other machine elements
Thermal spraying

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

Arc Spray Device "ARC-150/S500"

An arc spraying device boasting high productivity, simplicity, and reliability!

The "ARC-150/S500" is an arc spraying device that provides a very balanced control with flexible operation for discharge. It is designed for anti-corrosion applications and can spray zinc, aluminum, and zinc-aluminum alloys. Additionally, it is capable of spraying other materials commonly used in larger applications, such as high-temperature alloys. 【Features】 ■ 500A capacity = high productivity ■ Closed-loop current = simplicity and reliability ■ Use of 2.3mm and 2.5mm anti-corrosion wires (also 1.6mm cored materials) ■ Air-cooled cables ■ Flexible operability of the gun *For more details, please refer to the catalog or feel free to contact us.

企業：澤村溶射センター
価格：Other

Other semiconductor manufacturing equipment
Thermal spraying

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

Frame thermal spray device 'MK73'

Ideal for use in the configuration of long supply packages! Provides a fast spraying speed.

This product is a flame spraying device that uses oxygen and propane as fuel to provide a corrosion-resistant coating. The lightweight and well-balanced sturdy gun offers a fast spraying speed, saving both time and costs. By using additional extensions, it becomes possible to spray at right angles, allowing work in areas where conventional equipment finds it difficult to spray, such as between pipes. 【Features】 ■ Fast spraying gun in the market (up to 50 kg/hour for zinc continuous) ■ Wide range of wire diameters (1.5 to 4.76 mm) suitable for many applications and coating requirements ■ Suitable for not only corrosion-resistant wires but also some steel, copper, and bronze wires ■ Sturdy construction that combines lightweight and ease of handling with good balance ■ Various hose lengths available to suit each application *For more details, please refer to the external link page or feel free to contact us.

企業：澤村溶射センター
価格：Other

Other semiconductor manufacturing equipment
Thermal spraying

製品を詳しく見る

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

Frame thermal spray device "MK66E-PC"

It is possible to stop production in conjunction with external automatic devices! PC control with distributed I/O.

The "MK66E-PC" is a fully automatic flame spraying device equipped with mass flow control. The defective sensors check for flame misfires, wire stoppages, and wire breaks, and can stop production in conjunction with external automatic devices. These features ensure continuous operation, improved coating quality, and minimal downtime. 【Features】 ■ User-friendly intuitive operator interface ■ PC control with touch panel ■ Infinite recording of manufacturing methods and parameters ■ Manual or fully continuous start, operation, and stop ■ Interlock to prevent operation without nozzle air *For more details, please refer to the external link page or feel free to contact us.

企業：澤村溶射センター
価格：Other

Other semiconductor manufacturing equipment
Thermal spraying

製品を詳しく見る

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

Arc spraying device "ARC145/S245"

Easy setting of the thermal spray current! Using the patented "coaxial drive" system for metallization!

The "ARC145/S245" is a two-wire arc spraying gun system that allows for spraying either manually or with a robot, making it suitable for small job shops. It enables ultra-stable continuous spraying over lengths of up to 20 meters from the wire spool to the gun. With a longer reach, it is lightweight and flexible, making the spraying process more comfortable for the operator. 【Features】 ■ Utilizes the patented "coaxial drive" system for metallization ■ Features a hermetically sealed power supply for high reliability ■ Offers a wide range of wire diameters (1.6 to 2.5 mm) to suit various applications and coating requirements ■ Power cable employs an air cooling method, making it lightweight ■ Easy handling of the gun *For more details, please refer to the external link page or feel free to contact us.

企業：澤村溶射センター
価格：Other

Other semiconductor manufacturing equipment
Thermal spraying

製品を詳しく見る

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

Laser Cladding Processing Device "MED-CLAD"

A high-purity coating enhances the corrosion resistance, wear resistance, and impact resistance of metal components!

"MED-CLAD" is a standalone product, a laser cladding processing device used for applying laser-clad coatings. The control panel box provides mass flow control for laser shield gas and powder feed gas for repeatable cladding. All processes of cladding are controlled through a touchscreen panel, and the operator interface is operated with a Windows interface. 【Features】 ■ High-density, high-quality coatings with low dilution ■ Mass flow control of process gas and powder supply gas ■ User-friendly, intuitive operator interface ■ 3kW diode laser suitable for most cladding processes ■ PC control with a touchscreen ■ Pre-set manufacturing methods or manual parameter settings ■ Manual or automatic operation *For more details, please refer to the PDF document or feel free to contact us.

企業：澤村溶射センター
価格：Other

Other semiconductor manufacturing equipment
Thermal spraying

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

Plasma Spray System 'Met-PCC(PLAS)'

Adopting all the features of the conventional plasma and HVOF equipment's concise control and operator interface!

The "Met-PCC(PLAS)" is the latest development in the atmospheric plasma spraying (APS) equipment from Metralization Inc. The company's latest PLC operates the equipment, and devices communicate through a reliable Ethernet protocol, resulting in a processor that excels in operability, integration, and communication. 【Features】 ■ Mass flow control of primary gas, secondary gas, and carrier gas = high repeatability accuracy ■ User-friendly intuitive operator interface ■ Inverter power supply = stability ■ PC control with a touch panel operator interface ■ Option for keyboard control or operator interface device *For more details, please refer to the PDF document or feel free to contact us.

企業：澤村溶射センター
価格：Other

Other semiconductor manufacturing equipment
Thermal spraying

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

Frame Thermal Spray System 'MK73-FS'

Corrosion-resistant coating: Save time and costs! Flame spraying equipment using oxygen and propane as fuel.

The "MK73-FS" is a flame spraying device that uses oxygen and propane as fuel, providing excellent corrosion-resistant coatings. The lightweight and well-balanced sturdy gun offers a fast spraying speed, saving both time and costs. By using additional extensions, it is also possible to spray at right angles, allowing work in areas where conventional equipment finds it difficult to spray, such as between pipes. 【Features】 ■ The stop-start mechanism allows the operator to stop spraying while keeping the flame ignited (for example, during inspections or while moving workpieces). ■ A wide range of wire diameters (1.5 to 4.76 mm) is suitable for many applications and coating requirements. ■ Available in versions with diffused and non-diffused jets, allowing for detailed processing or efficient spraying of large areas. ■ Wire speed control is variable. *For more details, please refer to the PDF document or feel free to contact us.

企業：澤村溶射センター
価格：Other

Other semiconductor manufacturing equipment
Thermal spraying

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

[Data] POLYFUSION Chemical Resistance Data Sheet

Results of representative selected chemicals! Such as acetaldehyde, bleach, hydrofluoric acid, etc.

This document introduces the "chemical resistance of POLYFUSION" when continuously immersed in chemicals for up to 12 months. Various chemicals are used, including "acetaldehyde (40%)", "bleach", "diethylene glycol", and "hydrofluoric acid (40%)". Results for "splash", "occasional short-term contact", and "long/continuous contact" are included. Please take a look. [Items Included] ■ Chemicals ■ Maximum Usage Temperature (°C) ■ POLYFUSION ・ Splash ・ Occasional Short-term Contact ・ Long/Continuous Contact *For more details, please refer to the PDF document or feel free to contact us.

企業：澤村溶射センター
価格：Other

Chemicals
Thermal spraying

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

[Information] About the Polyfusion Waterproof Test

Description of the test subject with photos! The testing method is also explained in detail, and a schematic diagram of the testing equipment is included.

This document explains the results of testing the water permeability of a specimen treated with the protective coating "IBIX POLYFUSION" under pressure. It includes descriptions of the specimen, actual photographs, referenced standards, and equipment, as well as detailed methods and schematic diagrams of the testing apparatus. In addition to the results, photographs of the specimen after testing are also included, so please take a moment to read through it. [Contents] ■ Test Report ■ Description of the Specimen ■ Referenced Standards ■ Equipment ■ Method ■ Results *For more details, please refer to the PDF document or feel free to contact us.

企業：澤村溶射センター
価格：Other

Other polymer materials
Thermal spraying

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

Thermal spraying - メーカー・企業62社の業務用製品ランキング | イプロスものづくり

Thermal sprayingのメーカー・企業ランキング

Thermal sprayingの製品ランキング

Thermal sprayingの製品一覧

[Technical Introduction] Surface Modification Supporting Power Generation Equipment

Surface modification technology: thermal spraying

Thermal spraying method "Arc spraying"

Shinko Metalicon Co., Ltd. Thermal Spray Method Comprehensive Catalog

[Spraying Case] Wear Resistance

No worries about thermal distortion at processing temperatures around 100℃! Leave the thermal spraying issues to us!

For information on thermal spraying, visit "thermal-spraying.com".

Wear-resistant super-hard thermal spray material 'SURPREX W2007'

Wear-resistant, abrasion-resistant super-hard thermal spray material 'SURPREX W1004'

Shock-resistant super-hard thermal spray material 'SURPREX W2000X Series'

Laser Engraved Ceramic Roll

Maintenance & Relocation

AeroTech Corporation Business Introduction

Alumina + tungsten coating for [improved thermal efficiency] <processing example>

Surface Treatment Technology: Five Features and Seven Effects of Kodama's Thermal Spraying Technology

HVOF thermal spraying (High Velocity Oxygen Fuel spraying)

[Product Example] Wear-resistant and restorative coating for equipment and parts

Thermal spray coating (wear resistance, shape restoration, creation of new functions)

[Data] Thermal Spray Case Photos

Digest Edition: Thermal Spray Coating Technology Handbook, 1st Edition

Simultaneously achieving low-frequency noise reduction and lightweight, compact design [Low-frequency magnetic shielding thermal spraying]

Arc Spray Device "ARC-150/S500"

Frame thermal spray device 'MK73'

Frame thermal spray device "MK66E-PC"

Arc spraying device "ARC145/S245"

Laser Cladding Processing Device "MED-CLAD"

Plasma Spray System 'Met-PCC(PLAS)'

Frame Thermal Spray System 'MK73-FS'

[Data] POLYFUSION Chemical Resistance Data Sheet

[Information] About the Polyfusion Waterproof Test

Thermal sprayingの関連カテゴリ