Last Updated： Aggregation Period:Dec 10, 2025～Jan 06, 2026
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Dec 10, 2025～Jan 06, 2026
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Dec 10, 2025～Jan 06, 2026
This ranking is based on the number of page views on our site.
166～180 item / All 341 items
Birth of a release and non-stick coating for thin films
A non-stick coating has been developed that combines release properties and water repellency comparable to fluoropolymer processing (polytetrafluoroethylene resin). It is effective against adhesion of adhesives, glues, and molten plastics.
Powder ceramic coating roller with an environmentally friendly coating treatment.
◆ Since it is a dry method, no volatile organic solvents are used at all, making it an environmentally friendly coating roller. ◆ It has excellent wear resistance and durability. ◆ The grip can be adjusted by changing the particle size of the ceramic powder.
A lineup of five types of coating rollers: "urethane," "beads," "powder ceramic," "ceramic," and "silicone"!
It is possible to change the coating material according to the intended use. You can vary it for different purposes such as wear resistance, durability, adjusting grip strength, ensuring precise feeding accuracy, and preventing ink and paper dust adhesion. It is suitable for feeding rollers and drive rollers of OA equipment such as printers, copiers, FAX machines, and plotters. ◇◆◆◇◆━━━━━━━━━━━━━━━━━━━━━━━━━ For more details, please download the catalog and take a look. Alternatively, feel free to contact us. ━━━━━━━━━━━━━━━━━━━━━━━━━◇◆◆◇◆
It is a coating roller that excels in wear resistance, durability, and is environmentally friendly.
Conventional ceramic coatings were processed using spraying or adhesion, but with powder, we can utilize the performance of traditional ceramic coating rollers while also providing an environmentally friendly coating process. Since it uses a dry method, it does not use any volatile organic solvents, making it an eco-friendly coating roller. It excels in wear resistance and durability. Additionally, by changing the particle size of the ceramic powder, the grip can be adjusted. For more details, please contact us or refer to the catalog.
![[Information] Choosing a Disappointing Surface Treatment: Film Type Selection Edition](https://image.mono.ipros.com/public/product/image/1e7/2000542187/IPROS44149742731303779490.png?w=280&h=280)
Various methods and types of surface treatment are available. A correlation chart showing the characteristics of each type of film is included. Free coating is currently being offered.
"Is the surface treatment we are currently using suitable?" "Is there a better surface treatment available?" "Which surface treatment is best for this issue?" For those who are considering these questions, we offer recommendations for the appropriate surface treatment based on (purpose-specific categories such as release, wear resistance, sliding, corrosion resistance, etc.) and (correlation diagrams of various film types). Please download and take a look. [Contents] ■ Purpose of surface treatments ■ Correlation diagrams of various film types ■ Summary ■ Proposal for ASF films *For more details, please refer to the PDF document or feel free to contact us.
To companies using medical devices, pharmaceutical manufacturing machines, and plating! AS-F coating for stable and safe operations.
Medical devices and pharmaceutical manufacturing equipment are often used in environments where corrosion and adhesion occur, leading to issues such as equipment components not functioning properly and the devices themselves becoming unstable. Our developed film, 'AS-F', has received rigorous evaluations from customers and has been proven to solve these problems, being adopted in many jigs and molds. Improved release properties, durability, and corrosion resistance. There are numerous case studies of trouble resolution. Companies using medical devices, pharmaceutical manufacturing equipment, and plating are encouraged to consider our solution. Additionally, inquiries made by October 20, 2021, will receive a free prototype. For more details, please refer to the PDF materials. [Features] - Adhesion prevention - Improved release properties - Increased durability - Enhanced corrosion resistance - Safe components *For more information, please refer to the PDF materials or feel free to contact us.
UV coating agent 'UFH Coat' ideal for chemical flooring and flooring.
Daily maintenance is just cleaning! The optimal UV coating agent for chemical flooring and hardwood floors, 'UFH Coat'. ■□■ Features ■□■ ■ Heel marks and dirt are hard to adhere, and even if they do, they can be easily wiped off. ■ A clean and aesthetically pleasing floor is expected, with high hardness that is resistant to scratches. ■ No need for waxing or stripping work, thus preventing environmental damage from wastewater treatment by not using stripping agents. ■ No discoloration of the coating film, and it prevents fading of the flooring material. ■ Daily management requires only dust control and damp mopping. ■ The initial installation time, including the stripping of existing wax, is no different from the time required for conventional cleaning tasks. Additionally, monthly maintenance only involves regular cleaning, and even including the restoration work when gloss decreases, the annual work time is halved. ■ Recoating maintenance due to wear can be easily performed. Since the wear condition varies depending on the frequency of foot traffic and environment, the timing for recoating maintenance will be judged separately (typically about once every six months to three years). ■ Cost reduction for floor maintenance is expected. ■ For more details, please contact us.
Prevent loss due to parts falling off during tape component storage! Can be easily reattached without hassle! Compatible with all carrier tape widths with just one type.
When storing taping components, we prevent losses caused by parts falling off due to the cover tape being peeled off. The use of cellophane tape eliminates the hassle of peeling it off when resetting and prevents issues caused by adhesive residue. During reinstallation, it can be attached as is without the need for peeling. This is recommended for sites that implement small quantities of various types or use supplied components! ■ This is a tape for securing the cover tape (top tape) when removing and storing the taping reel from the tape feeder. ■ There is no hassle of peeling off the tape again when reattaching to the feeder or during implementation. ■ The tape has perforations, allowing it to accommodate all carrier tape widths with just one type of tape. ■ The risk of wasting expensive components is reduced, making it effective for long-term storage as well. ■ If you contact us, we can provide samples. * For more details, please request documentation or view the PDF data from the download.
8-inch wafer compatible nano coater (release agent application device)
This device is designed to apply a release agent to a maximum 8-inch wafer through the processes of coating, rinsing, and drying, thereby fixing the release agent to the work surface. The processing is done one workpiece at a time. It is a dip coater-type device that reflects the dip coating technology owned by SDI. *For more details, please download the catalog or contact us.*
Dip coating equipment for printed circuit boards and ceramic materials.
This device is an automatic dip coater that picks up three printed circuit boards set in a dedicated cassette simultaneously, dip coats them with a specialized dip coating liquid, and after drying, stores them back in the dedicated cassette.
![[Free Comprehensive Catalog Gift] Dip Coater, Nano Coater](https://image.mono.ipros.com/public/product/image/018/2000136875/IPROS8384174272242060304.jpg?w=280&h=280)
Desktop dip coater for experiments and development (dip coating device), nano coater (release agent application device), prototypes, mass production, and many others listed!
◆◆Right now, we are offering a free comprehensive catalog.◆◆ We offer a wide range of dip coating technologies for uniform thin film coating at low cost, including dip coaters that can easily (with variable speed) apply coatings and nano coaters that fix release agents. These technologies can be selected according to various applications across many fields. We have a 3D type nano speed dip coater that accommodates various processes, a micro speed dip coater that can form thin films on both sides simultaneously, an integrated device with a BOX that has a gas replacement function with nitrogen and a nano coater, a nano coater (compatible with cylindrical shapes) that fixes release agents on work surfaces, and a cleaning device with an ultrasonic cleaning tank that is ideal for those requiring high cleanliness specifications. We also offer a fully automatic dip coating device that continuously applies, dries, and cools pattern resist as a substitute for dry film on flat copper plates in the printed circuit board manufacturing process. For more details, please download the catalog or contact us.
Hard coat material coating device
This device is a semi-automatic dip coater (dip coating) designed for the automation of cleaning polycarbonate sheets after injection molding, dip coating with hard coat material, hot air drying, and UV curing.
Gas replacement box integrated nano coater (release agent application device)
This device is an integrated unit consisting of a BOX with a gas replacement function using nitrogen and a nano coater (release agent application device). It processes quartz glass with dimensions up to 152mm × 152mm and a thickness of 6.0mm through ultrasonic cleaning, release agent application, rinse cleaning, and fixation drying, thereby applying the release agent to the work surface. The processing is done one workpiece at a time. It is a dip coater-type device that reflects the dip coating technology owned by SDI. The nano coater is a trademark of SDI. For more details, please contact us.
A coating device that applies a release agent to the roll material, followed by rinsing, washing, and drying processes to fix the release agent on the surface of the roll.
This device is designed to apply a release agent to roll material, followed by rinsing and drying processes, thereby fixing the release agent onto the surface of the roll. All release agents and rinsing liquids are automatically supplied.
Manufactured in the requested size! Also produces tungsten, tantalum, Inconel, and more.
At Imtech Co., Ltd., we manufacture molybdenum bolts, nuts, and washers in the sizes you require. We can also produce items in tungsten, tantalum, Inconel, titanium, and other materials, so please feel free to consult with us. Additionally, we can manufacture nuts in shapes other than hex nuts, such as two-faced nuts, according to your preferences. 【Standard Products】 ○ Molybdenum Bolts → Sizes: M2, M3, M4, M5, M6, M8, M10 → Pitch: 0.4, 0.5, 0.7, 0.8, 1, 1.25, 1.5 ○ Molybdenum Nuts → Sizes: M2, M3, M4, M5, M6, M8, M10 → Pitch: 0.4, 0.5, 0.7, 0.8, 1, 1.25, 1.5 ○ Molybdenum Washers → Sizes: M2, M3, M4, M5, M6, M8 For more details, please contact us or download the catalog.
