Fluorine coating agent Product List and Ranking from 10 Manufacturers, Suppliers and Companies

Fluorine coating agent case study: Strongly protects printed circuit boards from moisture and acids.

Fluorine coating is ideal for substrate coating. It has four times the moisture and water resistance of urethane and acrylic coatings when dried at room temperature. It is non-flammable and safe.

The fluorine coating agent (conformal coating) "FloroSurf FG-3650 series" is suitable for waterproofing and insulation protection of electronic components, as well as for moisture-proof and waterproof coatings on printed circuit boards. It exhibits protective functions such as moisture resistance, saltwater resistance, water resistance, acid resistance, resistance to lithium battery electrolyte, and water and oil repellency, all in a thin film. PFAS-regulated substances are not used. 【Features】 ■ Non-flammable and low-odor liquid, making it safe to use! Not classified as an organic solvent. → FloroSurf FG-3650 is safe due to its non-flammability and low toxicity. It is not subject to PRTR law or fire service law regulations. No explosion-proof equipment is required, and quantity management is unnecessary. ■ Not classified as an organic solvent under the Industrial Safety and Health Act. → This reduces management items such as environmental measurements and organic solvent health checks for workers. ■ Higher moisture and waterproofing performance compared to other resins! → It has four times the moisture-proof performance compared to urethane and acrylic-based moisture-proof coatings. ■ Resistant to acidic substances such as lithium battery electrolytes! → It can protect the circuit board during electrolyte leakage, preventing fire accidents. ■ Cures at room temperature in 5-20 minutes after application! → No special equipment like heating furnaces is required. ☆ Currently providing samples and a moisture-proof coating handbook exclusively for corporate clients.

Company：フロロテクノロジー
Price：Other

Coating Agent
Fluorine coating agent

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

[Case of Solvent-Free] Conformal Coating Agent Not Subject to Organic Solvents

Environmentally friendly (non-organic solvent + non-hazardous + low odor) room temperature drying moisture-proof coating agent for printed circuit boards (conformal coating agent).

The protective coating agent for electronic circuit boards (conformal coating) "FloroSurf FG-3650 series" is suitable for waterproofing and insulation protection of electronic components, as well as for moisture-proof and waterproof coatings of mounted circuit boards. It is non-flammable and does not fall under organic solvent regulations, making it free from fire safety and occupational health and safety law restrictions. Compared to urethane, acrylic, and silicone-based coatings, it offers 3 to 10 times better moisture resistance (at the same film thickness). It provides protective functions such as moisture resistance, saltwater resistance, water resistance, acid resistance, resistance to lithium battery electrolyte, and water and oil repellency, all in a thin film. 【Benefits in the Manufacturing Environment】 ■ Safe to use as it is a non-flammable, low-odor liquid. → FloroSurf FG-3650 is safe due to its non-flammability and low toxicity. It is not subject to PRTR law or fire safety regulations, eliminating the need for explosion-proof equipment and quantity management. ■ Not classified as an organic solvent under occupational health and safety law. → No need for environmental measurements in the workplace or organic solvent health checks for workers. ■ Cures at room temperature in 5-20 minutes after application. → No special equipment like heating furnaces is necessary. ■ Low viscosity makes it easy to handle, and it does not dirty the workplace. ■ The pot life is virtually permanent, resulting in zero waste. ■ Repairs can be made after coating. *If you would like a free sample, please contact us.

Company：フロロテクノロジー
Price：Other

Coating Agent
Fluorine coating agent

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Fingerprint-resistant agent

By applying it to the surfaces of glass display cases in jewelry stores and various shops, fingerprints are less likely to stick, and wiping them off becomes easy. The anti-soiling performance lasts for a long time.

It can be easily applied with a transparent coating, providing long-lasting (over 1 year) dirt-repellent properties to glass surfaces. ■ A durable dirt-repellent coating is needed without changing the appearance. ■ It is non-flammable and low-odor, making it safe to apply in stores. FluoroSurf FG-5084 is also used for dirt prevention on smartphone touch panels. *If you would like a free sample, please include "Sample Request" in your inquiry.

Company：フロロテクノロジー
Price：Other

Coating Agent
Fluorine coating agent

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

指紋付着低減コーティング剤　フロロサーフ

各種素材の指紋の付着を強力に抑制！　ふき取りが簡単になります。常温で簡単に施工可能。使用現場での再塗布も容易です。

防汚コーティングとは、製品を汚れから守る加工のことです。指紋の付着や油脂の汚れ、水垢などが簡単に除去できるようになります。日々のメンテナンスの手間を省くことができます。【こんなケースに威力を発揮します】 ■タッチパネル表面の指紋を簡単に除去できるようにしたい ■タッチパネルの滑り性をアップし、操作感を向上させたい ■指紋や汚れの清掃時間の短縮化を図りたい ■外観を変えずに、耐久性のある防汚コーティング剤が必要 ■金属表面にスケール（白シミ）が付着して取れなくなる。 ■ステンレス製の操作盤や内扉において指紋が目立つ。 ■ディスプレイに使用されるフィルムの透過率向上と指紋防止。 ■操作時の滑り性アップ。 ※無料サンプルご希望の方は、お問い合わせ内容に「サンプル希望」とご記載下さい。

Company：フロロテクノロジー
Price：Other

Coating Agent
Fluorine coating agent

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

防汚コーティング剤　フロロサーフ

各種素材の指紋や汚れの付着を強力に抑制！　ふき取りが簡単になります。常温で簡単に施工可能。使用現場での再塗布も容易です。

防汚コーティングとは、製品を汚れから守る加工のことです。指紋の付着や油脂の汚れ、水垢などが簡単に除去できるようになります。日々のメンテナンスの手間を省くことができます。【こんなケースに威力を発揮します】 ■タッチパネル表面の指紋を簡単に除去できるようにしたい ■タッチパネルの滑り性をアップし、操作感を向上させたい ■指紋や汚れの清掃時間の短縮化を図りたい ■外観を変えずに、耐久性のある防汚コーティング剤が必要 ■金属表面にスケール（白シミ）が付着して取れなくなる。 ■ステンレス製の操作盤や内扉において指紋が目立つ。 ■ディスプレイに使用されるフィルムの透過率向上と指紋防止。 ■操作時の滑り性アップ。 ※無料サンプルご希望の方は、お問い合わせ内容に「サンプル希望」とご記載下さい。

Company：フロロテクノロジー
Price：Other

Coating Agent
Fluorine coating agent

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Fingerprint-resistant coating agent, ideal for showcases.

By applying FluoroSurf FG-5084 to the surfaces of glass cases in jewelry stores and various shops, it becomes easy to wipe off fingerprints. The performance lasts for a long time.

A transparent fluororesin film forms on the glass surface, providing a long-lasting (over 1 year) effect in reducing fingerprint adhesion. ■ A durable anti-fouling coating that does not change the appearance ■ Just soak a cloth and wipe! ■ Non-flammable and low-odor, making it safe to apply in stores. ■ When the effect diminishes, simply wipe again as is. FluoroSurf FG-5084 is also used to prevent dirt on smartphone touch panels. *If you would like a free sample, please include "Sample Request" in your inquiry.

Company：フロロテクノロジー
Price：Other

Coating Agent
Fluorine coating agent

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

防汚コーティング剤　フロロサーフ

各種素材への指紋や汚れの付着を強力に抑制！　ふき取りが簡単になります。常温で簡単に施工可能。使用現場での再塗布も容易です。

防汚コーティングとは、製品を汚れから守る加工のことです。指紋の付着や油脂の汚れ、水垢などが簡単に除去できるようになります。日々のメンテナンスの手間を省くことができます。【こんなケースに威力を発揮します】 ■タッチパネル表面の指紋を簡単に除去できるようにしたい ■タッチパネルの滑り性をアップし、操作感を向上させたい ■指紋や汚れの清掃時間の短縮化を図りたい ■外観を変えずに、耐久性のある防汚コーティング剤が必要 ■金属表面にスケール（白シミ）が付着して取れなくなる。 ■ステンレス製の操作盤や内扉において指紋が目立つ。 ■ディスプレイに使用されるフィルムの透過率向上と指紋防止。 ■操作時の滑り性アップ。 ※無料サンプルご希望の方は、お問い合わせ内容に「サンプル希望」とご記載下さい。

Company：フロロテクノロジー
Price：Other

Coating Agent
Fluorine coating agent

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Anti-fouling agent makes it difficult for tape, band-aids, glue, and dirt to stick to metal blades.

When you apply FluoroSurf FG-5093 to scissors or metal blades, tape and glue will not stick, significantly improving work efficiency. It has dirt-repellent and non-stick properties.

When FluoroSurf FG-5093 is applied to metal, it imparts non-stick properties to the surface. Non-stick means that tape, adhesives, and other dirt are less likely to stick and can be easily removed. When applied to cutting tools such as scissors, utility knives, and cutting blades, it prevents adhesive materials from sticking to scissors during the cutting of adhesive tape or medical bandages, significantly improving work efficiency. Moreover, this performance is durable, allowing it to maintain its effectiveness over a long period. Additionally, the coating film is an extremely thin film of about 10 nanometers, so it does not affect the sharpness of the cutting tools. 【Reasons to Choose FluoroSurf FG-5093】 ■ The effect of fluorine makes it easy to remove dirt ■ Transparent thin film has minimal impact on appearance ■ Easy to apply on-site and air dries at room temperature ■ Durability of over one year ■ If the effect diminishes, reapplication is easy to restore performance Other examples are also included! *If you would like a free sample, please include "Sample Request" in your inquiry.

Company：フロロテクノロジー
Price：Other

Other polymer materials
Fluorine coating agent

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

指紋防止コーティング剤　フロロサーフ

各種素材への指紋の付着を強力に抑制！ふき取りも簡単になります。常温で簡単に施工可能。使用現場での再塗布も容易です。

防汚コーティングとは、製品を汚れから守る加工のことです。指紋の付着や油脂の汚れ、水垢などが簡単に除去できるようになります。日々のメンテナンスの手間を省くことができます。【こんなケースに威力を発揮します】 ■タッチパネル表面の指紋を簡単に除去できるようにしたい ■タッチパネルの滑り性をアップし、操作感を向上させたい ■指紋や汚れの清掃時間の短縮化を図りたい ■外観を変えずに、耐久性のある防汚コーティング剤が必要 ■金属表面にスケール（白シミ）が付着して取れなくなる。 ■ステンレス製の操作盤や内扉において指紋が目立つ。 ■ディスプレイに使用されるフィルムの透過率向上と指紋防止。 ■操作時の滑り性アップ。 ※無料サンプルご希望の方は、お問い合わせ内容に「サンプル希望」とご記載下さい。

Company：フロロテクノロジー
Price：Other

Coating Agent
Fluorine coating agent

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Non-stick coating to prevent adhesive and tape adhesion to metal blades.

Power of fluorine strongly prevents adhesion of adhesives and tapes! The surface treatment of the transparent thin film can be easily applied at room temperature. Reapplication on-site is also easy.

The simple fluorine coating exhibits strong non-stick properties. By applying the coating, it becomes difficult for adhesives to adhere, and it also reduces dirt such as fingerprints, grease, and water stains. Furthermore, it can be easily removed. This helps to eliminate the hassle of daily maintenance. 【It is effective in the following cases】 ■ Preventing adhesive from sticking to metal knives and scissors ■ Ensuring that tape does not stick to the blade when cutting adhesive tape ■ Making it easier to remove scale from faucet fixtures ■ Wanting to easily remove fingerprints from touch panel surfaces ■ Improving the slip properties of touch panels to enhance the user experience ■ Aiming to reduce cleaning time for fingerprints and dirt ■ Needing a durable anti-fouling coating that does not change the appearance ■ Scale (white stains) adhering to metal surfaces and becoming difficult to remove ■ Fingerprints being noticeable on stainless steel control panels and inner doors ■ Improving the light transmittance of films used on displays and preventing fingerprints ■ Enhancing slip properties during operation *If you would like a free sample, please include "Sample Request" in your inquiry.

Company：フロロテクノロジー
Price：Other

Coating Agent
Fluorine coating agent

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Fingerprint-resistant coating. Easy application. Just apply and let it air dry at room temperature!

Strongly suppresses the adhesion of fingerprints and dirt on various materials! Wiping off becomes easy. Can be easily applied at room temperature. Reapplication on-site is also simple.

By applying an anti-fouling coating, fingerprints, oils, and water stains become less likely to adhere and can be easily removed. This helps reduce the hassle of daily maintenance. 【This is effective in the following cases】 ■ Want to easily remove fingerprints from touch panel surfaces. ■ Want to improve the smoothness of the touch panel and enhance the user experience. ■ Aim to reduce the cleaning time for fingerprints and dirt. ■ Need a durable anti-fouling coating that does not change the appearance. ■ Scale (white stains) adheres to metal surfaces and becomes difficult to remove. ■ Fingerprints are noticeable on stainless steel control panels and inner doors. ■ Improve the light transmittance of films used on displays and prevent fingerprints. ■ Increase smoothness during operation. *If you would like a free sample, please include "Sample Request" in your inquiry.

Company：フロロテクノロジー
Price：Other

Coating Agent
Fluorine coating agent

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Substrate coating agent strongly protects the substrate from lithium battery electrolyte.

Forms a coating resistant to lithium battery electrolyte. Numerous achievements in mobile and automotive substrates. Only requires room temperature drying, no heating needed. Non-volatile organic solvents + non-hazardous materials.

Conformal Coating (Protective Coating for Electronic Circuit Boards) "Fluorosurf FG-3650 Series" is suitable for waterproofing and insulation protection of electronic components, as well as for moisture-proof and waterproof coatings of mounted circuit boards. It is non-flammable and does not contain organic solvents (VOC), making it free from fire safety laws, occupational safety and health laws, and VOC regulations. Furthermore, our products do not use PFOS or PFOA at all. 【Performance Features】 ■ High resistance to acidic substances such as the electrolyte of lithium batteries → Protects the circuit board in case of electrolyte leakage, preventing fire accidents. ■ Higher moisture-proof and waterproof properties compared to other resins → Provides four times the moisture-proof performance compared to urethane or acrylic moisture-proof coatings at the same film thickness! Exhibits more than ten times the moisture-proof performance compared to silicone-based coatings. The increase in weight due to the coating film is minimized, making it ideal for lightweight devices such as mobile equipment. ■ Exhibits strong protective effects against acidic gases, saline solutions, and corrosive liquids, also providing rust prevention effects. ■ Does not contain low molecular compounds like silicone, so it will not cause contact failure of electrical contacts after application. ■ A model with fluorescent dye for application confirmation is also available. *Please contact us if you would like a free sample.

Company：フロロテクノロジー
Price：Other

Coating Agent
Fluorine coating agent

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Moisture-proof coating agent, dries at room temperature in 3 minutes, non-flammable, free of regulated substances.

Numerous achievements in vehicle-mounted circuit boards. Environmentally friendly (non-organic solvent + non-hazardous + low odor) moisture-proof coating agent for printed circuit boards. Dries at room temperature without the need for heating.

The protective coating agent for electronic circuit boards (conformal coating) "Fluorosurf FG-3650 series" exhibits protective functions such as moisture resistance, gasoline resistance, saltwater resistance, water resistance, acid resistance, resistance to lithium battery electrolyte, and water and oil repellency with a thin film coating. It has numerous achievements in waterproofing and insulation protection of electronic components, as well as moisture and waterproof coatings for mounted circuit boards. It is non-flammable and does not fall under organic solvent regulations, making it free from fire safety and occupational safety regulations. Additionally, it does not contain any PFOS, PFOA, or PFHxS. 【Performance Features】 ■ High moisture and water resistance → Compared to urethane and acrylic-based moisture-proof coatings of the same film thickness, it has four times the moisture-proof performance! It exhibits more than ten times the moisture resistance compared to silicone-based coatings. The increase in weight due to the coating film is minimized, making it ideal for lightweight devices such as mobile equipment. ■ High resistance to acidic substances such as lithium battery electrolytes → It can protect the circuit board in the event of electrolyte leakage, preventing fire accidents. ■ It exhibits strong protective effects against acidic gases, saline solutions, and corrosive liquids, also providing rust prevention effects. ■ Since it does not contain low molecular compounds, it will not cause contact failure of electrical contacts after application. *If you would like a free sample, please contact us.

Company：フロロテクノロジー
Price：Other

Coating Agent
Fluorine coating agent

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Fluororesin coating agent for metal blades, simply apply on-site and air dry at room temperature.

Just by applying it to a metal blade, tape and glue will not stick. Easily processed on-site. The transparent thin film does not affect cutting performance. It is durable and easy to reapply.

When you apply FluoroSurf FG-5093 to cutting tools such as Thomson blades, scissors, utility knives, and push-cut blades, these adhesives do not stick during cutting, significantly improving work efficiency. Moreover, this performance is durable, allowing it to maintain its effectiveness over a long period. Additionally, the coating film is transparent and extremely thin, about 10 nanometers, which does not affect the sharpness of the cutting tools. 【Reasons to Choose FluoroSurf FG-5093】 ■ The effect of fluorine makes it difficult for adhesives and tapes to stick. ■ Transparent thin film (at the nanometer level) has minimal impact on appearance. ■ Can be easily applied in our own factory production sites and only requires room temperature drying. ■ When the effect diminishes, simple reapplication restores performance easily. ■ Non-flammable and safe, with low odor. ■ Completely free of regulated PFAS substances such as PFOS, PFOA, and PFHxS. *If you would like a free sample, please include "Sample Request" in your inquiry.

Company：フロロテクノロジー
Price：Other

Other polymer materials
Fluorine coating agent

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Acid-resistant coating agent that works just by applying it, free of regulated substances, transparent thin film.

Acid-resistant fluorine coating agent that provides strong protection against acids from fuel cells and lithium batteries. Can be applied in-house. Free of regulated substances.

The fluorine coating agent "Fluorosurf" forms a transparent fluororesin film at room temperature, providing various benefits such as acid protection, water and oil repellency, prevention of grease migration (diffusion), fingerprint adhesion prevention, dirt resistance, lubrication, and release properties. 【Effective for the following applications!】 ■ Prevention of metal sulfide and oxidation ■ Protection of metals and resins from acids generated in fuel cells and lithium batteries. ■ Rust prevention for metals around batteries ■ Coating resistant to lithium electrolyte ■ Prevention of fingerprint adhesion on displays and lenses ■ Prevention of oil leakage from miniature motors and spindle motor bearings ■ Stopping the flow of sealing resins ■ Insulating and moisture-proof coating for electrical circuits ■ Prevention of leaks in electrical circuits ■ Release agent for molds used in resin and elastomer molding 【Features】 ◯ A special fluororesin is dissolved in a non-flammable fluorine-based solvent to create a solution. ◯ Easy coating by brush or immersion. It dries in 5 seconds to 15 minutes at room temperature. ◯ After drying, a transparent thin film of fluororesin is formed, exhibiting properties such as dirt resistance, water repellency, and moisture resistance. 〇 PFAS regulated substances PFOS, PFOA, and PFHxS are not used at all. *If you would like a free sample, please include "Sample Request" in your inquiry.

Company：フロロテクノロジー
Price：Other

paint
Fluorine coating agent

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

自社施工可能なフッ素コーティング　PFAS規制対象外

常温型透明皮膜フッ素コ－ティング剤　塗るだけで撥水撥油や指紋付着防止、汚れ防止、防湿、非粘着、離型性、耐酸性を発揮。

フッ素コート剤「フロロサーフ」は、常温で形成されるフッ素樹脂皮膜が、撥水撥油、油脂類のはいあがり（拡散）防止・指紋付着防止・防汚：潤滑・離型など、さまざまなメリットを発揮します。【特長】〇PFAS規制物質　（PFOA PFOS PFHｘSなど）は不使用です。 ◯特殊なフッ素樹脂を不燃性のフッ素系溶剤に溶解し溶液化。 ◯刷毛や浸漬などで簡単コーティング。室温で5秒～15分で乾燥します。 ◯乾燥後は透明で薄膜のフッ素樹脂皮膜が形成され、防汚、撥水、防湿等の効力を発揮。【こんな用途に効果を発揮！】 ■金属の硫化や酸化防止 ■耐リチウム電解液コーティング ■樹脂やエラストマー成型の金型離型剤 ■ディスプレイやレンズの指紋付着防止 ■ミニチュアモーター・スピンドルモーターの軸受け油流出防止 ■封止樹脂流れ止め ■電気回路の絶縁防湿コーティングリーク防止 ※無料サンプルご希望の方は、お問い合わせ内容に「サンプル希望」とご記載下さい。 ※なお、弊社製品は工業用化学製品のため個人用途（法人格のない場合）、医療用途、食品に触れる用途につきましては、サンプル提供をいたしかねます。

Company：フロロテクノロジー
Price：Other

paint
Fluorine coating agent

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Surface treatment that easily forms a dirt-repellent, non-stick, water-repellent, and oil-repellent surface at room temperature.

Room temperature type fluorine coating agent. Easy to apply, and after drying, it exhibits effects such as water and oil repellency, fingerprint resistance, dirt resistance, and release properties! No regulated substances used.

The fluorine coating agent "FluoroSurf," which is a water and oil repellent treatment agent, exhibits water and oil repellency through the fluororesin film formed on the surface, effectively repelling water and oil. It offers various benefits such as preventing the rise of grease, diffusion prevention, adhesion prevention, and dirt resistance. 【Features】 ◯ A special fluororesin is dissolved in a non-flammable fluorine-based solvent or organic solvent to create a solution. ◯ Easy coating with a brush or immersion. Dries in 5 seconds to 15 minutes at room temperature. ◯ After drying, a fluororesin film is formed, exhibiting effects such as dirt resistance, water repellency, and moisture resistance. ◯ PFAS regulated substances are not used. 【Effective for the following applications!】 ■ Water and oil repellent treatment for shoes and clothing = waterproof spray concentrate… ■ Prevention of oil leakage from miniature motors and spindle motor bearings ■ Waterproof and moisture-proof protective coating for printed circuit boards ■ Coating for printed circuit boards resistant to lithium electrolyte ■ Fingerprint adhesion prevention for displays and lenses ■ Resin flow stop for capacitor sealing ■ Reduction of reflected light in optical components ■ Binder for dry lubricants *Free samples are currently available. *If you would like a free sample, please include "Sample Request" in your inquiry.

Company：フロロテクノロジー
Price：Other

paint
Fluorine coating agent

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

PFAS Measures: For Those Struggling with the Suspension of Fluorine Product Supply

We offer alternative products for those who are having trouble obtaining release agents, water-repellent and oil-repellent agents, and fluorine-based compounds due to supply discontinuation. Please feel free to consult with us.

The following PFASs are currently subject to regulation: Fully regulated: Precursors of PFOS, PFOA, and PFHXs are subject to regulation for almost all uses. Planned European Restrictions: PFHxA is prohibited for the following limited uses: Textiles, leather, paper, food packaging, shoes, etc. As there is no empirical evidence proving the harmfulness of other PFASs, and restricting them would have a significant impact on industries such as semiconductors and automobiles, the European Chemicals Agency announced on August 27th of this year that fluoropolymers for industrial use will be exempt from regulation. Several fluorochemical manufacturers have announced the discontinuation of their products; however, our products are currently not subject to regulation, so we do not plan to halt supply. If you are facing issues due to the discontinuation of products such as release agents or water- and oil-repellent treatments, we can provide information, suggestions, and samples of alternative products. Please feel free to contact us.

Company：フロロテクノロジー
Price：Other

paint
Fluorine coating agent

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Fluorine coating agent for automobiles that can be applied easily.

Ensure visibility during rainy weather! For automotive water-repellent coating.

In the automotive industry, ensuring visibility during rainy weather is extremely important for safe driving. When water droplets adhere to the windshield or body, visibility decreases, increasing the risk of accidents. High-performance water-repellent coatings are essential for repelling rainwater and maintaining clear visibility. Our fluorine-based coating exhibits excellent water-repellent properties, supporting safe driving. 【Usage Scenarios】 - Water-repellent coating for windshields - Water-repellent coating for the body - Water-repellent coating for mirrors 【Benefits of Implementation】 - Improved visibility during rainy weather, enhancing safety - Easier removal of dirt during car washes - Long-lasting coating effects

Company：フロロテクノロジー
Price：Other

paint
Fluorine coating agent

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Fluorine coating agent for semiconductor manufacturing that can be simply applied.

Maintain a cleanroom environment! Improve yield with dirt resistance, water repellency, and moisture resistance.

In the semiconductor manufacturing industry, maintaining a cleanroom environment is extremely important. Fine dust and particles can significantly degrade product quality, so thorough contamination control measures are required. Additionally, the effects of humidity and chemicals during the manufacturing process can also undermine product reliability. Our fluorine coating agents address these challenges by providing anti-contamination, water-repellent, and moisture-proof properties, helping to maintain the cleanroom environment and contribute to yield improvement. 【Application Scenarios】 - Contamination control measures for equipment and parts within cleanrooms - Water-repellent and moisture-proof protection for semiconductor manufacturing equipment - Dirt prevention for wafer transport fixtures 【Benefits of Implementation】 - Reduction in defect rates due to foreign material adhesion - Decreased frequency of equipment maintenance - Improvement in product quality

Company：フロロテクノロジー
Price：Other

paint
Fluorine coating agent

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Conformal coating agent, environmentally friendly, room temperature drying, SDGs.

Environmentally friendly (non-organic solvent + non-hazardous + low odor) room temperature drying moisture-proof coating agent for printed circuit boards (conformal coating agent).

The protective coating agent for electronic substrates (conformal coating) "FloroSurf FG-3650 series" is suitable for waterproofing and insulation protection of electronic components, as well as for moisture-proof and waterproof coatings of mounted substrates. It is non-flammable and does not fall under the category of organic solvents, making it free from regulations under the Fire Service Act and the Industrial Safety and Health Act. Compared to urethane-based, acrylic-based, and silicone-based coatings, its moisture resistance is more than 3 to 10 times greater (at the same film thickness)! It exhibits protective functions such as moisture resistance, saltwater resistance, water resistance, acid resistance, resistance to lithium battery electrolyte, and water and oil repellency, all in a thin film. 【Benefits in Manufacturing Environments】 Perfectly aligned with SDGs ■ Non-flammable and low-odor liquid, making it safe to use → Safe due to its non-flammability and low toxicity. Not subject to PRTR law or Fire Service Act regulations. No need for explosion-proof equipment or quantity management. ■ Not classified as an organic solvent under the Industrial Safety and Health Act → Eliminates the need for environmental measurements in the workplace and organic solvent health checks for workers. ■ Cures at room temperature in just 5-20 minutes after application! → No special equipment or processes, such as heating furnaces, are required. ■ Low viscosity makes it easy to handle. The workplace remains clean. ■ Pot life is virtually indefinite. Zero waste. ■ Repairs are possible after coating. *If you would like a free sample, please contact us.

Company：フロロテクノロジー
Price：Other

Coating Agent
Fluorine coating agent

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Conformal coating agent <Free sample available> Non-hazardous material

Safe and secure with non-organic solvents. The "FluoroSurf FG-3650 Series" is suitable for conformal coating for waterproofing and insulation of electronic components.

The protective coating agent for electronic substrates, "Fluorosurf FG-3650 Series," is suitable for waterproofing and insulation protection of electronic components, as well as for moisture-proof and waterproof coating (conformal coating) of mounted substrates. Although it is fluorine-based, it is not subject to PFAS regulations. ▼ Excellent performance of Fluorosurf FG-3650 Series High moisture and waterproof properties / Resistance to lithium battery electrolyte / Acid resistance and resistance to oxidative gases High insulation resistance and low dielectric constant / Non-flammable and non-hazardous ~ We are offering free samples exclusively for corporate clients! ~ Please select "Request Sample" from the [Contact Button] below.

Company：フロロテクノロジー
Price：Other

Coating Agent
Fluorine coating agent

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Substrate protection coating agent, significant reduction in management, non-flammable, solvent-free.

Moisture-proof coating agent for room temperature drying type printed circuit boards (conformal coating agent) considering safety, workplace environment, and performance.

The electronic substrate protective coating agent (conformal coating) "Fluorosurf FG-3650 Series" is suitable for waterproofing and insulation protection of electronic components, as well as for moisture-proof and waterproof coatings on mounted substrates. It is non-flammable and does not fall under the category of organic solvents, making it exempt from regulations under the Fire Service Act and the Industrial Safety and Health Act. Additionally, it does not use PFAS regulated substances, significantly reducing management items in the workplace. Furthermore, compared to urethane, acrylic, and silicone-based coatings, it exhibits 3 to 10 times greater moisture resistance (at the same film thickness) while providing protective functions such as moisture resistance, saltwater resistance, water resistance, acid resistance, resistance to lithium battery electrolyte, and water and oil repellency. 【Benefits in the Manufacturing Field】 ■ Non-flammable and low-odor liquid, allowing for safe use → It is safe as it is non-flammable. Exempt from Fire Service Act regulations. No need for hazardous material storage, hazardous material handling manuals, or explosion-proof equipment, and quantity management is unnecessary. ■ Not classified as an organic solvent under the Industrial Safety and Health Act → No need for environmental measurements in the workplace or organic solvent health checks for workers. ■ Cures at room temperature in 5-20 minutes after application → No special equipment such as heating furnaces is required. ■ Low viscosity makes it easy to handle. The workplace remains clean. ■ Pot life is virtually permanent. Zero waste. ■ Repairs are possible after coating.

Company：フロロテクノロジー
Price：Other

Coating Agent
Fluorine coating agent

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Moisture-proof coating agent, significant reduction in management items, non-flammable, solvent-free.

Moisture-proof coating agent for room temperature drying type printed circuit boards (conformal coating agent) that takes into account safety, workplace environment, and performance.

The protective coating agent for electronic substrates (conformal coating) "FloroSurf FG-3650 series" is suitable for waterproofing and insulation protection of electronic components, as well as for moisture-proof and waterproof coatings of mounted substrates. It is non-flammable and does not fall under the category of organic solvents, thus exempt from regulations under the Fire Service Act and the Industrial Safety and Health Act. Additionally, it does not use PFAS regulated substances, significantly reducing management items in the workplace. Furthermore, compared to urethane, acrylic, and silicone-based coatings, it exhibits 3 to 10 times greater moisture resistance (at the same film thickness) while providing protective functions such as moisture resistance, saltwater resistance, water resistance, acid resistance, resistance to lithium battery electrolyte, and water and oil repellency. 【Benefits in the Manufacturing Site】 ■ Safe to use as it is a non-flammable, low-odor liquid → It is safe as it is non-flammable. Exempt from Fire Service Act regulations. No need for hazardous material storage, hazardous material handling manuals, or explosion-proof equipment, and quantity management is unnecessary. ■ Not classified as an organic solvent under the Industrial Safety and Health Act → Management items such as workplace environmental measurements and organic solvent health checks for workers are no longer necessary. ■ Completes drying at room temperature in 5-20 minutes after application → No special equipment such as heating furnaces is required. ■ Low viscosity makes it easy to handle. The workplace remains clean. ■ The pot life is semi-permanent. Zero waste. ■ Repairs are possible after coating.

Company：フロロテクノロジー
Price：Other

Coating Agent
Fluorine coating agent

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Insulating coating agent, high insulation properties, high moisture resistance, high safety.

Insulation coating agent. High insulation properties that strongly prevent leaks. Room temperature drying type. SDGs compliant (non-organic solvent + non-hazardous + low odor).

The insulating coating agent (conformal coating) "Fluorosurf FG-3650 series" is suitable for insulating protection of electronic components, waterproofing, leak prevention, and moisture-proof and waterproof coatings for mounted circuit boards. It is non-flammable and does not fall under organic solvent regulations, making it free from fire safety and occupational health and safety law regulations. Additionally, PFOS, PFOA, and PFHxS are not used at all. 【Performance Features】 It exhibits protective functions such as high insulation, high moisture resistance, saltwater resistance, water resistance, acid resistance, high resistance to lithium battery electrolyte, and water and oil repellency, all in a thin film. ■ Compared to other resins, it has high moisture and waterproof properties. → It has 4 times the moisture resistance compared to urethane or acrylic-based moisture-proof coatings at the same film thickness! It exhibits more than 10 times the moisture resistance compared to silicone-based coatings. The increase in weight due to the coating film is minimal, making it ideal for lightweight mobile devices. ■ High resistance to acidic substances such as lithium battery electrolytes. → It can protect the circuit board in the event of electrolyte leakage, preventing fire accidents. ■ It exhibits strong protective effects against acidic gases, saline solutions, and corrosive liquids, also providing rust prevention. ■ It does not contain low molecular compounds like silicone, which can cause contact failure of electrical contacts after application. *If you would like a free sample, please contact us.

Company：フロロテクノロジー
Price：Other

Coating Agent
Fluorine coating agent

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Insulating coating agent with over 4 times high performance, non-flammable and safe.

More than four times the moisture resistance and high insulation compared to urethane and acrylic. Non-hazardous and non-organic solvents, no need for explosion-proof equipment or management. Just room temperature drying is sufficient!

The insulation coating agent, FluoroSurf FG-3650 series, is ideal for insulating protection of electronic components, as well as waterproof and moisture-proof coatings. Compared to urethane-based, acrylic-based, and silicone-based coatings, its moisture resistance is more than 3 to 10 times greater (at the same film thickness)! It demonstrates insulation protection functions such as moisture resistance, saltwater resistance, water resistance, acid resistance, resistance to lithium battery electrolyte, and water and oil repellency, all in a thin film. 【Benefits in the manufacturing environment】 ■ Non-flammable and free from fire safety regulations → No need for explosion-proof equipment, hazardous material storage, or quantity management. ■ Not classified as an organic solvent under the Industrial Safety and Health Act → No need for workplace environmental measurements or organic solvent health checks for workers. ■ Cures at room temperature in just 5-20 minutes after application! → No special equipment like heating furnaces is necessary. ■ Low viscosity makes it easy to handle. The workplace remains clean. ■ Pot life is virtually permanent. Zero waste. ■ Repairs are possible after coating.

Company：フロロテクノロジー
Price：Other

Coating Agent
Fluorine coating agent

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

[Case Study] Optimal for Connector Moisture-Proofing and Water-Repellent Treatment

It is also possible to impart conductivity by adjusting the film thickness. It is used as a moisture-proof and water-repellent treatment agent for connector components where conductivity is required.

The "INT Series" is a fluorine coating agent that easily forms a high-performance fluorine film with room temperature quick-drying properties, effectively repelling both water and oil. It forms a fluorine film that strongly repels not only water but also oil. Due to its water and oil repellency, it is effective in preventing oil diffusion. Furthermore, it maintains high oil repellency for an extended period against motor oil. 【Features】 ■ Water and oil repellency ■ Oil barrier properties ■ Oil resistance ■ Acid resistance ■ Chemical resistance *Our products comply with the new REACH PFOA regulations and can be used without any issues. Please feel free to contact us, as we have 10 years of experience and proven results in PFOA countermeasures.

Company：NODASCREEN CO.,LTD.
Price：Other

Coating Agent
Fluorine coating agent

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Water and oil repellent fluorosurf FG-5040 for dirt prevention.

High safety, low toxicity non-flammable solvent type *Sample available.

A fluorosurfactant that forms a water-repellent and oil-repellent film with a pencil hardness of 3H, capable of reducing dirt adhesion. 【Features】 ■ Forms a water-repellent and oil-repellent film with a pencil hardness of 3H, capable of reducing dirt adhesion. ■ Also functions as a moisture-proof and rust-proof coating. ■ The film has a low refractive index (1.41). By controlling the film thickness to about 0.1μ, it can also be used as a low-reflective surface coat. ■ When applied to transparent plates or lenses, light transmittance increases by 3-4%. ■ The effect is particularly enhanced when stacking multiple lenses. *If you would like a free sample, please include "Sample Request" in your inquiry.

Company：フロロテクノロジー
Price：Other

Coating Agent
Fluorine coating agent

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

[Example] Providing anti-fouling properties (fingerprint reduction) to optical films.

By adding a small amount to UV-curable acrylic hard coat agents, you can impart functionalities such as anti-fouling (fingerprint reduction), low refractive index, and slip properties.

FluoroSurf FS-702X series is a fluorine-based additive for UV-curable hard coatings. When processing UV-curable hard coatings on optical films, simply adding a small amount of FluoroSurf FS-702X to the hard coating can impart functionalities such as anti-soiling (fingerprint reduction), low refractive index, and slip properties. After addition, the fluorine component rises to the surface of the hard coating and exhibits its functions, and during UV irradiation, it co-polymerizes with the components of the hard coating to become integrated. By integrating, this product's functionality possesses abrasion resistance. *If you would like a free sample, please include "Sample Request" in your inquiry.

Company：フロロテクノロジー
Price：Other

others
Fluorine coating agent

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Low reflection and anti-reflective coating example: FluoroSurf FS-702X

Introducing examples of how we have met the needs of customers from various industries with the UV-curable hard coat agent additive "FS-702X series."

The "FloroSurf FS-702X Series" is a product that can impart functionalities such as anti-fouling, low refractive index, slip resistance, and water and oil repellency by adding just a small amount to UV-curable acrylic hard coat agents. During drying, the fluorine component rises to the surface of the hard coat agent to exhibit its functions, and an addition amount of about 1-3% is sufficient. It offers good cost performance. When exposed to UV light, it co-polymerizes with the components of the hard coat agent, enhancing wear resistance as well. [Introduction to Background] ■ We want to impart anti-fouling and anti-reflective functions to optical films. *If you would like a free sample, please include "Sample Request" in your inquiry.

Company：フロロテクノロジー
Price：Other

others
Fluorine coating agent

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Fluorine coating agent Product List and Ranking from 10 Manufacturers, Suppliers and Companies | IPROS GMS

Fluorine coating agent Manufacturer, Suppliers and Company Rankings

Fluorine coating agent Product ranking