Perforated metal Product List and Ranking from 17 Manufacturers, Suppliers and Companies

Corner hole (parallel pattern) sample [punching processing example]

Material: A1100-SPV / Punching pattern: square holes / Hole diameter: 8 squares × 10P (parallel) / Open area ratio: 64% / Plate thickness: 2.0t

Sanwa Punching Industrial is a specialized manufacturer of punching metal, operating under advanced equipment. We provide a comprehensive range of services from punching (punching) processing to leveling and turret punching, and we also offer sales of standard punching metal products. We can accommodate various requirements such as material, thickness, hole diameter, open area ratio, and flatness, establishing a wide lineup including round holes, elongated holes, square holes, and decorative holes. 【Introduction of Punching Metal Processing Example】 ■ Material: A1100-SPV ■ Punching Pattern: Square Hole ■ Hole Diameter: 8 square × 10P (parallel) ■ Open Area Ratio: 64% ■ Plate Thickness: 2.0t ■ Industry: Design ■ Quantity: 1 ＜Request Details＞ The material should be aluminum with a thicker plate that can be processed. I would like to see a sample processed with the punching pattern of 8 square × 10P in parallel. Ideally, the edges of the outer perimeter should match the spacing between the holes. ＜Processing Details＞ We performed punching processing from the leftover material we have (A1100-SPV plate thickness 2.0t) and finished it with shearing (cutting). *For more details about our products and services, please refer to the catalog available for download below "PDF Download."

Company：三和打抜工業
Price：Other

Processing Contract

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Punching Metal <Decorative Pattern> [Punching Processing Example]

Material: AL (A1100) / Punching Pattern: Decorative Holes / Hole Diameter: Sanwa Punching Industry Catalog No. 71 / Plate Thickness: 1.0t

Sanwa Punching Industry, as a specialized manufacturer of punching metal, develops a comprehensive range of services from punching processing to leveling and turret punching, all under advanced equipment. We also offer sales of standard punching metal products. We can accommodate various requirements such as material, thickness, hole diameter, open area ratio, and flatness, establishing a wide lineup including round holes, elongated holes, square holes, and decorative holes. 【Introduction of Punching Metal Processing Examples】 ■ Material: AL (A1100) ■ Punching Pattern: Decorative Hole ■ Hole Diameter: Sanwa Punching Industry Catalog No. 71 ■ Plate Thickness: 2.0t ■ Industry: Construction Industry ■ Delivery Time: 1-2 weeks ＜Request Details＞ We would like to produce design punching for use in doors. ＜Processing Details＞ We processed punching from standard aluminum material (1250×2500) to specified dimensions (with four-sided edges) and performed stop hole processing on the outer perimeter. After the punching process, we further processed additional holes from the top and delivered it after passing through a leveling machine to ensure flatness. *For more details about our products and services, please refer to the catalog available for download below.

Company：三和打抜工業
Price：Other

Processing Contract

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Cross Sword (Decorative Punching) [Punching Processing Example]

Material: Iron - SPCC / Punching Pattern: Decorative Holes / Hole Diameter: 15mm Cross / Size: 1219×2438 / Plate Thickness: 1.6t

Sanwa Punching Industrial is a specialized manufacturer of punching metal, operating under advanced equipment. We provide a comprehensive range of services from punching (punching) processing to leveling and turret punching, and we also offer sales of standard punching metal products. We can accommodate various requirements such as material, thickness, hole diameter, open area ratio, and flatness, establishing a wide lineup including round holes, elongated holes, square holes, and decorative holes. 【Introduction of Punching Metal Processing Examples】 ■ Material: Steel - SPCC ■ Punching Pattern: Decorative Hole ■ Hole Diameter: 15mm Cross ■ Size: 1219×2438 ■ Plate Thickness: 1.6t ■ Quantity: 1 <Note> This is an introduction to punching metal with a decorative pattern. Our company possesses numerous molds and can accommodate punching processes like the one shown in the image. Pattern: Cross 15mm × 22P (Staggered) Material: Steel (SPCC) Plate Thickness: 1.6t Size: Standard material 4×8 (1219×2438) We can process not only standard materials but also custom dimensions, so please feel free to contact us. *For more details about our products and services, please refer to the catalog available for download below "PDF Download."

Company：三和打抜工業
Price：Other

Processing Contract

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

In-house equipment [Punching processing example]

Material: Zinc-coated steel plate / Punching pattern: Long hole / Hole diameter: 3×20 long hole / Size: 160×1700 / Plate thickness: 0.8t / Quantity: 2 pieces

Sanwa Punching Industrial, as a specialized manufacturer of punching metal, operates under advanced equipment to provide a comprehensive range of services from punching processing to leveling and turret punching. We also offer sales of standard punching metal products. We can accommodate various requirements such as material, thickness, hole diameter, open area ratio, and flatness, establishing a wide lineup including round holes, elongated holes, square holes, and decorative holes. 【Introduction of Punching Metal Processing Examples】 ■ Material: Zinc-coated steel plate ■ Punching Pattern: Elongated holes ■ Hole Diameter: 3×20 elongated holes ■ Size: 160×1700 ■ Plate Thickness: 0.8t ■ Quantity: 2 pieces <Processing Details> This time, we used leftover materials to create corner protectors to safeguard the edges of the material. Since we do not have a bending machine, we have punched elongated holes at positions that allow for manual bending. Widening the spacing between holes requires considerable force when bending, but by narrowing the spacing, we make it easier to bend. *For more details on our products and services, please refer to the catalog available for download below "PDF Download."

Company：三和打抜工業
Price：Other

Processing Contract

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Exhibit 2 (Partner Company) [Punching Processing Case Study]

Material: Aluminum / Punching Pattern: Decorative Holes / Hole Diameter: Decorative Holes / Size: Approximately 800 × Approximately 1700 / Plate Thickness: 2t / Delivery Time: Shortest

Sanwa Punching Industrial, as a specialized manufacturer of punching metal, operates under advanced equipment to provide a comprehensive range of services from punching (punching) processing to leveling and turret punching. We also offer sales of standard punching metal products. We accommodate various requirements such as material, thickness, hole diameter, open area ratio, and flatness, establishing a wide lineup including round holes, elongated holes, square holes, and decorative holes. 【Introduction of Punching Metal Processing Examples】 ■ Material: Aluminum ■ Punching Pattern: Decorative Holes ■ Hole Diameter: Decorative Holes ■ Size: Approximately 800 × approximately 1700 ■ Plate Thickness: 2t ■ Delivery Time: Shortest ＜Request Details＞ The item is to be used for an exhibition, and the final shape will be a cylinder made of aluminum. The hole pattern is special, and we need to ensure that the holes connect when arranged. ＜Processing Details＞ It was judged that responding to this pattern with punching processing would be difficult, so we requested processing from a partner company, similar to case 1. Although there were concerns about distortion compared to item 1, the final product turned out to be much less distorted and beautifully finished. ＜Note＞ Providing accurate data in advance will facilitate smooth production. *For more details about our products and services, please refer to the catalog available for download below "PDF Download."

Company：三和打抜工業
Price：Other

Processing Contract

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Punching Metal for Fixtures [Punching Processing Examples]

Material: Aluminum / Punching pattern: Decorative holes / Hole diameter: 20mm and 52mm / Size: 300×300 / Thickness: 2t / Quantity: 2 sheets

Sanwa Punching Industrial Co., Ltd. is a specialized manufacturer of punching metal, operating under advanced equipment. We provide a comprehensive range of services from punching (punching) processing to leveling and turret punching, and we also offer sales of standard punching metal products. We can accommodate various requirements regarding material, thickness, hole diameter, opening ratio, and flatness, establishing a wide lineup including round holes, elongated holes, square holes, and decorative holes. 【Introduction of Punching Metal Processing Examples】 ■ Material: Aluminum ■ Punching Pattern: Decorative Hole ■ Hole Diameter: 20mm, 52mm ■ Size: 300×300 ■ Plate Thickness: 2t ■ Quantity: 2 pieces ＜Request Details＞ Is it possible to perform punching processing for 50mm hexagons to be used at an event? ＜Processing Details＞ Our existing hexagonal punching mold has a maximum size of only 20mm, and creating a new mold would not meet the delivery deadline, so we combined irregular molds to produce hexagons exceeding 50mm through punching processing. ＜Note＞ The combination of irregular molds allowed for a clean punching process without any sense of discomfort, and comparisons could be made. *For more details on our products and services, please refer to the catalog available for download below "PDF Download."

Company：三和打抜工業
Price：Other

Processing Contract

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Stainless Steel Perforated Metal 1 [Punching Processing Example]

Material: SUS430-HL / Punching Pattern: Round Hole / Hole Diameter: 5Φ×8P60° Staggered / Open Area Ratio: 35.4% / Plate Thickness: 1t

Sanwa Punching Industrial, as a specialized manufacturer of punching metal, operates under advanced equipment to provide a comprehensive range of services from punching processing to leveling and turret punching. We also offer sales of standard punching metal products. We can accommodate various requirements such as material, thickness, hole diameter, open area ratio, and flatness, establishing a wide lineup including round holes, elongated holes, square holes, and decorative holes. 【Introduction of Punching Metal Processing Examples】 ■ Material: SUS430-HL ■ Punching Pattern: Round Hole ■ Hole Diameter: 5Φ×8P 60° Staggered ■ Open Area Ratio: 35.4% ■ Plate Thickness: 1t ■ Industry: Signage ■ Delivery Time: Shortest possible ＜Request Details＞ We would like to request bending processing for the punching metal to be used as a sign. Since it will be made of stainless steel that can attract magnets and will be handled by people, we would like to ensure careful finishing after the bending process. ＜Processing Details＞ Our company does not perform bending processing, so we will handle the processing up to the bending stage. We coordinated with our partner company, created a drawing, and processed the stop holes and outer perimeter cutting using a turret punch press. *For more details about our products and services, please refer to the catalog available for download below "PDF Download."

Company：三和打抜工業
Price：Other

Processing Contract

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Punching metal for trays [Examples of punching processing]

Material: Aluminum / Punching Pattern: Round Hole / Hole Diameter: 14Φ×20.5P / Open Area Ratio: 46.7% / Plate Thickness: 2t / Quantity: 1 sheet

Sanwa Punching Industrial is a specialized manufacturer of punching metal, operating under advanced equipment. We provide a comprehensive range of services from punching processing to leveling and turret punching, and we also offer sales of standard punching metal products. We can accommodate various requirements such as material, thickness, hole diameter, open area ratio, and flatness, establishing a wide lineup including round holes, elongated holes, square holes, and decorative holes. 【Introduction of Punching Metal Processing Example】 ■ Material: Aluminum ■ Punching Pattern: Round Hole ■ Hole Diameter: 14Φ×20.5P ■ Open Area Ratio: 46.7% ■ Plate Thickness: 2t ■ Quantity: 1 piece ■ Delivery Time: 1 week <Inquiry Details> I would like to create a prototype tray, but I want it to be something other than a standard pattern. Please pay attention to flatness and the burrs on the back side. <Processing Details> Since the specified hole diameter pitch was given, we processed the holes one by one using a turret punch press. After processing, we cut it to the specified dimensions using shearing and shipped it. <Special Notes> There were almost no burrs, and we were able to deliver two days ahead of schedule, and the customer was satisfied with the finish. *For more details about our products and services, please refer to the catalog available for download below "PDF Download."

Company：三和打抜工業
Price：Other

Processing Contract

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

2Φ Round Hole Parallel [Punching Processing Example]

Material: SPCC / Punching pattern: round hole / Hole diameter: 2Φ×6P / Size: 500×600 / Opening ratio: 8.7% / Plate thickness: 1.6t

Sanwa Punching Industrial is a specialized manufacturer of punching metal, operating with advanced equipment to provide a comprehensive range of services from punching processing to leveling and turret punching. We also offer sales of standard punching metal products. We can accommodate various requirements regarding material, thickness, hole diameter, open area ratio, and flatness, establishing a wide lineup including round holes, elongated holes, square holes, and decorative holes. 【Introduction of Punching Metal Processing Examples】 ■ Material: SPCC ■ Punching Pattern: Round Hole ■ Hole Diameter: 2Φ×6P ■ Size: 500×600 ■ Open Area Ratio: 8.7% ■ Plate Thickness: 1.6t ■ Industry: Punching Metal ■ Quantity: 1 piece ■ Delivery Time: Prototype ＜Request Details＞ Can you process SPCC 1.6t with 2Φ×6P in parallel? How much warping or burr will occur during this process? ＜Processing Details＞ Since this is a prototype, we cut the leftover material to 600×600 and processed each hole individually with a turret punch press. The photo shows the state before correction, but after correction, it became flat. *For more details about our products and services, please refer to the catalog available for download below.

Company：三和打抜工業
Price：Other

Processing Contract

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

4Φ×8P [Punching Processing Example]

Material: Aluminum / Punching Pattern: Round Hole / Hole Diameter: 4Φ×8P / Size: 250×600 / Plate Thickness: 3mm

Sanwa Punching Industrial is a specialized manufacturer of punching metal, operating under advanced equipment. We provide a comprehensive range of services from punching processing to leveling and turret punching, and we also offer standard products of punching metal for sale. We can accommodate various requirements such as material, thickness, hole diameter, open area ratio, and flatness, establishing a wide lineup including round holes, elongated holes, square holes, and decorative holes. 【Introduction of Punching Metal Processing Example】 ■ Material: Aluminum ■ Punching Pattern: Round Hole ■ Material Shape: Sheet ■ Hole Diameter: 4Φ×8P ■ Size: 250×600 ■ Open Area Ratio: 22.7% ■ Plate Thickness: 3mm ■ Industry: Interior Design ■ Quantity: 2 sheets ■ Delivery Time: Fastest shipping to Kyushu ＜Request Details＞ We would like the anodizing treatment to be completed urgently before delivery. ＜Processing Details＞ Processed 4Φ×8P on 3t aluminum with double-sided protection using a turret punch press, then cut it as is. After leveling processing, it was taken to a partner company for anodizing treatment. *For more details about our products and services, please refer to the catalog available for download below.

Company：三和打抜工業
Price：Other

Processing Contract

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

2Φ×3.5P [Punching Processing Example]

Material: Zinc-coated steel plate / Punching pattern: Round holes / Hole diameter: 2Φ×3.5P / Size: 130×1100 / Plate thickness: 0.6t

Sanwa Punching Industrial, as a specialized manufacturer of punching metal, operates under advanced equipment to provide a comprehensive range of services from punching processing to leveling and turret punching. We also offer the sale of standard punching metal products. We can accommodate various requirements such as material, thickness, hole diameter, open area ratio, and flatness, establishing a wide lineup including round holes, elongated holes, square holes, and decorative holes. 【Introduction of Punching Metal Processing Examples】 ■ Material: Zinc-coated steel sheet ■ Punching Pattern: Round holes ■ Material Shape: Sheet material ■ Hole Diameter: 2Φ×3.5P ■ Size: 130×1100 ■ Open Area Ratio: 29.6% ■ Plate Thickness: 0.6t ■ Quantity: 200 ■ Delivery Time: 2 weeks ＜Request Details＞ We would like you to arrange the material, perform punching processing, and ship after cutting. ＜Processing Details＞ Process the sheet material using a C-type press to obtain multiple pieces, apply correction, and then cut with shearing before packaging and shipping. ＜Note＞ Processing will be done carefully while inspecting to avoid dimensional errors. *For more details about our products and services, please refer to the catalog available for download below "PDF Download."

Company：三和打抜工業
Price：Other

Processing Contract

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Punching metal for fixtures <4×24 long holes> [Punching processing example]

Material: Aluminum / Punching Pattern: Long Hole / Hole Diameter: 4×24 Long Hole / Size: 400×400 / Plate Thickness: 2.0t

Sanwa Punching Industrial is a specialized manufacturer of punching metal, operating with advanced equipment to provide a comprehensive range of services from punching processing to leveling and turret punching. We also offer sales of standard punching metal products. We can accommodate various requirements regarding material, thickness, hole diameter, open area ratio, and flatness, establishing a wide lineup including round holes, elongated holes, square holes, and decorative holes. 【Introduction of Punching Metal Processing Examples】 ■ Material: Aluminum ■ Punching Pattern: Elongated Hole ■ Hole Diameter: 4×24 Long Hole ■ Size: 400×400 ■ Plate Thickness: 2.0t ■ Industry: Interior Design ＜Request Details＞ We want to create punching metal for fixtures in a pattern not listed in the catalog. ＜Processing Details＞ We processed 4×24 mm elongated holes one by one while changing the orientation using a turret punch press. *For more details about our products and services, please refer to the catalog available for download below.

Company：三和打抜工業
Price：Other

Processing Contract

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Design Punching <2Φ・3Φ> [Punching Processing Example]

Material: Aluminum / Punching Pattern: Design Punching / Hole Diameter: 2Φ, 3Φ / Size: 300×330 / Plate Thickness: 1.5t

Sanwa Punching Industry, as a specialized manufacturer of punching metal, operates under advanced equipment and offers a comprehensive range of services from punching processing to leveling and turret punching. We also provide sales of standard punching metal products. We accommodate various requirements such as material, thickness, hole diameter, opening ratio, and flatness, establishing a wide lineup including round holes, elongated holes, square holes, and decorative holes. 【Introduction of Punching Metal Processing Examples】 ■ Material: Aluminum ■ Punching Pattern: Design Punching ■ Hole Diameter: 2Φ・3Φ ■ Size: 300×330 ■ Plate Thickness: 1.5t ＜Processing Details＞ We created a program to enable punching of materials for design purposes and processed it using a turret punch press. ＜Note＞ This is a design punching of a sheep created for distribution to clients in the Year of the Sheep. *For more details on our products and services, please refer to the catalog available for download below.

Company：三和打抜工業
Price：Other

Processing Contract

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Punching metal for interior use [Examples of punching processing]

Material: AL1100-SPV/SG / Punching pattern: decorative holes / Hole diameter: decorative / Size: 140mm×480mm etc. / Plate thickness: 2t

Sanwa Punching Industrial is a specialized manufacturer of punching metal, operating with advanced equipment. We provide a comprehensive range of services from punching processing to leveling and turret punching, and we also offer standard products for sale. We can accommodate various requirements such as material, thickness, hole diameter, open area ratio, and flatness, establishing a wide lineup including round holes, elongated holes, square holes, and decorative holes. 【Introduction of Punching Metal Processing Example】 ■ Material: AL1100-SPV/SG ■ Punching Pattern: Decorative Holes ■ Material Shape: 1000mm × 2000mm ■ Hole Diameter: Decorative ■ Size: 140mm × 480mm, etc. ■ Plate Thickness: 2t ■ Industry: Interior ■ Delivery Time: 2 weeks ＜Request Details＞ We would like to produce aluminum punching metal to fit in the partitions of a residence. - Dimensions: Several types - Holes: Cross (not listed in the catalog) - Edges: Minimal - Attention to scratches and burrs - Shortest delivery time - Powder coating (white) included ＜Special Note＞ Powder coating will be outsourced to a partner company. *For more details on our products and services, please refer to the catalog available for download below.

Company：三和打抜工業
Price：Other

Processing Contract

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Design Punching <Using several types of round holes> [Punching Processing Example]

Material: AL / Punching pattern: Design punching / Hole diameter: Various round holes used / Size: 1000×1200 / Plate thickness: 1.5t

Sanwa Punching Industrial, as a specialized manufacturer of punching metal, operates under advanced equipment to provide a comprehensive range of services from punching processing to leveling and turret punching. We also offer sales of standard punching metal products. We can accommodate various requirements such as material, thickness, hole diameter, open area ratio, and flatness, establishing a wide lineup including round holes, elongated holes, square holes, and decorative holes. 【Introduction of Punching Metal Processing Examples】 ■ Material: AL ■ Punching Pattern: Design Punching ■ Material Shape: Sheet Material ■ Hole Diameter: Several types of round holes used ■ Size: 1000×1200 ■ Plate Thickness: 1.5t ■ Industry: In-house use ■ Quantity: 1 piece <Processing Details> Data was created and processed for the design punching of a person. <Note> From a distance, it looks like a photo or painting, but up close, you can see that there are indeed holes. *For more details about our products and services, please refer to the catalog available for download below "PDF Download."

Company：三和打抜工業
Price：Other

Processing Contract

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Perforated metal Product List and Ranking from 17 Manufacturers, Suppliers and Companies

Perforated metal Manufacturer, Suppliers and Company Rankings

Perforated metal Product ranking