Ultra High Pressure Homogenizerのメーカーや取扱い企業、製品情報、参考価格、ランキングをまとめています。
イプロスは、 製造業 ・ BtoB における情報を集めた国内最大級の技術データベースサイトです。

Ultra High Pressure Homogenizer - メーカー・企業と製品の一覧

Ultra High Pressure Homogenizerの製品一覧

1～15 件を表示 ／ 全 30 件

表示件数
Ultra-high pressure homogenizer, Ranier type

Ultra-high pressure homogenizer, Ranier type

Ultra-high pressure homogenizer, Ranier type

Three-part cylinder block (R type): This unique structure is an example of our excellent technology. By dividing the suction section, discharge section, and plunger section within the cylinder block, we can minimize the risk of damage or cracking of the entire block during operation under adverse conditions and at high pressures exceeding 500 bar. Depending on the application, the pump valve can be changed to a ball valve or a poppet valve (the maximum pressure for poppet valve use is 600 bar). This structure demonstrates its maximum effectiveness when used under high viscosity and ultra-high pressure conditions. This cylinder can also be made in an aseptic specification.

  • Emulsifier/Disperser
  • Homogenizer

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Universal type! Ultra-high pressure homogenizer NAGS100

Universal type! Ultra-high pressure homogenizer NAGS100

The highest pressure in Japan! 250MPa!

Dispersing, emulsifying, and breaking down are performed at a high pressure of up to 250 MPa. Equipped with an H-type nozzle (for dispersing, emulsifying, and breaking down), the sample is pressurized by a high-pressure pump and passes through the H-type nozzle, allowing for efficient dispersion, emulsification, and breakdown of uniform fine particles. 【Features】 ○ Easy dispersion of nanoparticles ○ Minimal contamination ○ Difficult to reaggregate, stable for a long time ○ Surface condition of the sample remains unchanged ○ Can perform kneading *For details, please download the catalog from the link below.

  • Mixer/agitator

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Mass production type! Ultra-high pressure homogenizer NAGS1000

Mass production type! Ultra-high pressure homogenizer NAGS1000

Mass processing of 500 liters per hour! Ultra-high pressure homogenizer for micronizing slurry samples.

We perform dispersion, emulsification, and disintegration under high pressure. Equipped with our uniquely developed H-type nozzle, the sample pressurized by a high-pressure pump passes through the H-type nozzle, allowing for efficient dispersion, emulsification, and disintegration of uniform fine particles.

  • Mixer/agitator

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Contract Testing Case: Emulsification of Cosmetic Microparticles

Contract Testing Case: Emulsification of Cosmetic Microparticles

We are creating case studies within the company and making proposals.

The performance of equipment for powder processing (dispersion, emulsification, grinding) cannot be expressed in the catalog. The reason is that the processing methods change depending on the materials used and the intended purpose. So, what indicators should be used for selection? The best way is to look at actual processing examples. In our company, we create internal case studies to explain the technology of our equipment in an easy-to-understand manner for our customers. ● For more details, please download the catalog or contact us.

  • others

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Case of commissioned testing processing: Tricalcium phosphate (β-TCP)

Case of commissioned testing processing: Tricalcium phosphate (β-TCP)

Introducing the powder processing data materials of the NAGS series!

The performance of powder processing equipment (dispersion, emulsification, grinding) cannot be expressed in the catalog. The reason is that the processing method changes depending on the materials used and the purpose. So, what indicators should be used for selection? The best way is to look at actual processing examples. Tricalcium phosphate is actively used as a material for artificial bones and teeth, so it is necessary to create a material with high strength. An ultra-high-pressure homogenizer from Soko is effective for making particles finer. [Contents of Powder Processing Data Materials] - Comparison photos before and after processing - Particle size distribution data *Please download and view the data materials for processing examples from the link below.

  • others

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Case of entrusted testing processing: Escherichia coli

Case of entrusted testing processing: Escherichia coli

It plays an active role in the pretreatment of protein purification by grinding bacterial cells such as E. coli.

It can also be applied to the micronization of new compounds from pharmaceutical companies. From research models to mass production machines, by performing "processing condition output," it becomes possible to achieve highly reproducible results.

  • Chemicals

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Contracted Testing Case: Graphene

Contracted Testing Case: Graphene

Collaborated with overseas research institutions to develop materials and successfully achieved the exfoliation of graphite!

The utilization of the new material "graphene," which is strong and excels in conductivity and thermal dissipation, is gaining attention. However, there are still challenges regarding the production costs and mass production of single-phase graphene, making it difficult to widely deploy it as a material for manufacturing. In this context, research is being conducted to apply mechanical shear forces to inexpensive graphite bulk, efficiently peeling off layers to produce graphene. The Italian national research institute IIT (Istituto Italiano di Tecnologia) has focused on this manufacturing method early on and has adopted our ultra-high-pressure homogenizer (NAGS100) in the mechanical exfoliation process. Currently, multilayer graphene is being stably produced from graphite bulk and is being applied in various applications. In the future, mass production is being advanced, and inexpensive, high-quality graphene ink is expected to be sold worldwide.

  • スクリーンショット 0031-02-19 午後6.07.02.png
  • Secondary Cells/Batteries

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Contracted Test Processing Case: Fuel Cell

Contracted Test Processing Case: Fuel Cell

Achieving high output of PT catalysts!

Delivery to Tokai University. "CNTs, which have a large surface area and high electrical conductivity, are expected to be applied as supports. In our laboratory, we achieve high performance of Pt catalysts and high output of fuel cells by performing a pretreatment that uniformly disperses CNTs in water using an ultra-high-pressure homogenizer."

  • Lithium-ion battery

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Mechanism of the ultra-high pressure homogenizer

Mechanism of the ultra-high pressure homogenizer

Make it into a slurry and perform dispersion.

A "slurry" mixed with powder, solvent, and a dispersant to prevent re-agglomeration is injected into the sample tank. A pressure of up to 250 MPa is applied to the material within the device, and the materials are made to collide head-on using our unique "H-type nozzle" to achieve dispersion. We refer to passing the sample through the device once as a "pass." By repeating this "pass" multiple times, the materials are dispersed to sizes ranging from "microns to several tens of nanometers," and in a "uniform" manner.

  • Powder Molding Machine

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
I will explain about the H-type nozzle!

I will explain about the H-type nozzle!

Simultaneously achieving 'bringing out the quality of the materials' and 'easy maintenance'.

The "H-type nozzle" realizes the "three types of dispersion" unique to Joko! Within the "ultra-high pressure homogenizer" system, this part is made of "diamond." The material pushed through by a high-pressure pump passes through this specially crafted nozzle. And then, 1. Generation of jet flow Shearing occurs within the unit, resulting in a liquid phase jet flow. 2. Collision of materials When the sheared materials merge, they collide head-on. 3. Joko's unique vortex jet flow The vortex jet flow further enhances the effect. During depressurization, cavitation occurs while dispersing, efficiently extracting the effects of dispersants and other additives.

  • Powder Molding Machine

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
[Information] Explanation of the NAGS series mechanism.

[Information] Explanation of the NAGS series mechanism.

The characteristics of H-type nozzle dispersion processing are "damage-free" and the image of "loosening rather than crushing."

This document explains the mechanism of the "NAGS series." The general terms are "ultra-high pressure homogenizer" and "wet jet mill." It is a device that injects slurry materials at ultra-high pressure (up to 250 MPa) through a diamond processing nozzle to nano-size and nano-disperse various materials. Please take a moment to read it. [Contents] ■ What is Joko's nano-sizing device (NAGS series)? ■ Joko's unique design philosophy and H-type nozzle (NJP unit) *For more details, please refer to the PDF document or feel free to contact us.

  • Crusher

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Introducing Case Studies: What Nano-Micronization Involves with the NAGS Series

Introducing Case Studies: What Nano-Micronization Involves with the NAGS Series

The miniaturization and high performance of electronic devices such as batteries and MLCCs will rely on the nanomization of constituent materials as a key technology!

This document introduces processing examples related to nanomicroization involved in the NAGS series. Nanomicroization is a key technology for miniaturizing and enhancing the performance of electronic devices such as batteries and MLCCs (multi-layer ceramic capacitors) through the nanomicroization of constituent materials. Additionally, there is a demand for uniform particle processing that does not contain impurities. New processing examples from the industrial sector are also included. [Contents] ■ What is nanomicroization ■ New processing examples in the industrial sector *For more details, please refer to the PDF document or feel free to contact us.

  • Crusher

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
We are Joko, a manufacturer of wet dispersers. We also accept contract testing and contract manufacturing.

We are Joko, a manufacturer of wet dispersers. We also accept contract testing and contract manufacturing.

We support everything from elemental research of high-functional materials to contract manufacturing and production line establishment with our nano-micronization and nano-dispersion device "Joko NAGS"!

The NAGS series of ultra-high pressure homogenizers for wet-type nano-dispersion machines by Chokko is a highly versatile device capable of processing a wide range of materials, including ceramics, metals, high aspect ratio materials such as CNTs and CNFs, and emulsions. We also offer contract testing services and can assist your company in the development of high-performance materials. Please feel free to consult with us. 【Desktop Experimental Machine NAGS20 Features】 ■ Capable of handling a minimum of 8ml ■ Can accommodate high concentration and high viscosity samples ■ Electric desktop model achieving high-pressure processing at 200MPa ■ Extremely low contamination suitable for high-purity samples ■ Compatible with organic solvents (Most organic solvents, including acetone, toluene, and NMP, can be used) The "NAGS100" and "NAGS1000" are also equipped with our uniquely developed H-type nozzle, making scale-up from the "NAGS20" easy. Additionally, we accept requests for "CNT dispersion" and "contract testing and manufacturing." Detailed information is available in PDF and video format through the related links. *For more details, please refer to the PDF materials or feel free to contact us.

  • Homogenizer

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Numerous CNT dispersion achievements! The Joko dispersion machine NAGS series takes a step forward.

Numerous CNT dispersion achievements! The Joko dispersion machine NAGS series takes a step forward.

A must-see for those considering CNT (carbon nanotube) dispersion! We can create CNT dispersion solutions tailored to your needs. Please try it out with our contract testing first!

In recent years, CNTs have rapidly expanded their applications into various fields, including secondary batteries, semiconductors, and the enhancement of resin materials through mixing. On the other hand, CNTs are one of the difficult-to-disperse materials among high-performance materials. Using our years of experience, Joko will assist you in discovering the optimal conditions for generating dispersions tailored to your needs. 【Please feel free to contact us with the following concerns】 ■ CNT concentration → We will assist you in examining higher concentrations with an optimal equipment configuration for high viscosity. ■ Solvent types → We can conduct examinations with various solvents. Examples include water, NMP, IPA, ethyl acetate, and MEK. ■ Dispersant types → We can consult based on the compatibility with the type of CNT and solvent. (We have a small amount of various dispersants available, so preliminary discussions are also welcome.) ■ Pre-dispersion treatment → We can assist you with pre-dispersion before the main dispersion using NAGS, based on consultation. ■ Processing pressure and number of passes → We will work together to consider processing pressure and number of passes to achieve a dispersion state that minimizes damage to CNT fiber length, from a state of partial dispersion to complete dispersion. Please try our contract testing first.

  • Homogenizer

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Ultra-high pressure homogenizer LAB1000/2000

Ultra-high pressure homogenizer LAB1000/2000

The sample is refined by cavitation effects due to ultra-high pressure.

It is a device for testing, research, and experimentation that can emulsify, disperse, and crush small samples and expensive materials, as it is capable of handling small amounts of processing.

  • Emulsifier/Disperser
  • Homogenizer

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

Ultra High Pressure Homogenizerの関連カテゴリ

COPYRIGHT © 2001-2026 IPROS CORPORATION ALL RIGHTS RESERVED.