ティー・アイ・トレーディング List of Products and Services

We would like to introduce the AHD fixed lens camera 'ADE-BB56A' that we handle. It is a 4in1 WDA fixed dome type, strong against backlight and performs well in dark places. It is equipped with 18 surface-mounted infrared LEDs and can switch to analog output. Additionally, the minimum illumination is 0.001Lux, and it has an IP65 waterproof rating. 【Features】 ■ 4in1 WDA fixed dome type ■ Strong against backlight and performs well in dark places ■ High sensitivity of 0.001Lux ■ Waterproof rating of IP65 ■ Dimensions are φ120×H86.5mm

• Color camera

We would like to introduce our AHD autofocus camera, the 'ADA-BB95XA'. It allows zooming and focusing via DVR, smartphone, and PC. The connector specifications support AHD and analog 2 outputs, and it has an IP65 waterproof rating. Additionally, it is equipped with 18 surface-mounted infrared LEDs. 【Features】 ■ Full HD resolution (1920×1080) ■ High sensitivity 0.01Lux ■ Connector specifications for AHD and analog 2 outputs ■ Waterproof rating of IP65 ■ Equipped with 18 surface-mounted infrared LEDs

• Color camera

We would like to introduce the AHD varifocal camera 'ABV-Z56EA' that we handle. It is strong against backlight, can see in dark places, and can switch to analog output. It has an IP66 waterproof rating and is equipped with 20 surface-mounted infrared LEDs. Additionally, the minimum illumination is 0.001 Lux with full HD resolution (1920×1080). 【Features】 ■ Equipped with 20 surface-mounted infrared LEDs ■ Full HD resolution (1920×1080) ■ High sensitivity 0.001 Lux ■ Waterproof rating of IP66 ■ Lens is a varifocal lens 2.8–12mm

• Color camera

The minimum illumination is 0.001 Lux, and the full HD resolution is 1920×1080. It has an IP66 waterproof rating, and it uses a 3.6mm F1.0 fixed starlight lens. It can also be switched to analog output. 【Features】 ■ Color images in starlight ■ No infrared LEDs ■ Switchable to analog output ■ IP66 waterproof rating ■ Dimensions are φ75×L262mm

• Color camera
• Surveillance Cameras
• Surveillance Camera System

We would like to introduce the AHD PTZ camera 'ABP-4XV3' that we handle. It allows you to control zoom and lens rotation via DVR or smartphone, and can switch to analog output. The full HD resolution is 1920×1080, and it is equipped with six surface-mounted infrared LEDs. 【Features】 ■ Rotation angle: Horizontal 0–180° Vertical 0–55° ■ Drip-proof performance is IP65 rated ■ High sensitivity 0.01Lux ■ Can switch to analog output ■ Suitable for wall mounting

• Color camera
• Surveillance Cameras
• Surveillance Camera System

We would like to introduce our AHD fixed-focus camera, the 'ABE-Z37EA'. It is a 4in1 WDR bullet type camera that performs well against backlighting and can switch to analog output, making it suitable for low-light conditions. It features full HD resolution (1920×1080) and is equipped with 12 surface-mounted infrared LEDs. 【Features】 ■ 4in1 WDR bullet type ■ Switchable to analog output ■ Full HD resolution (1920×1080) ■ Equipped with 12 surface-mounted infrared LEDs ■ IP66 waterproof rating ■ High sensitivity of 0.001Lux

• Color camera

"Lad-Saf" is a safety system that permanently installs galvanized cables along factory monkey ladders, wind power generation equipment, and transmission and radio towers. It connects a safety device (slider) that slides along the cable to the harness of workers ascending and descending the ladder, preventing fall accidents. The safety device (slider) slides smoothly along the cable during normal ascent and descent, but in the event of a fall, its locking mechanism activates, limiting the fall distance to within 1 meter and minimizing the impact of the fall, ensuring the safety of the worker. It is widely used to protect workers from fall accidents in newly constructed and existing factory monkey ladders, wind power generation equipment, and transmission and radio towers around the world.

• Other safety and hygiene products

This product is a permanent horizontal fall prevention system that contributes to preventing worker falls and improving work efficiency at heights. A cable or rail is installed horizontally as a permanent lifeline, and a safety device (slider) that slides along the cable or rail is connected to the worker's harness. We offer a cable type "Uni8" and a rail type "Unirail," both manufactured by Capital Safety, which boasts high sales in the fall protection equipment industry.

• Other safety equipment

The black smoke purification device has been certified by the Ministry of Land, Infrastructure, Transport and Tourism as a type of black smoke purification device for third-stage emission control. It removes 100% of black smoke, making it invisible and reducing its impact on the human body. Self-regeneration (self-regeneration starting exhaust temperature is 300 to 360 degrees) prevents filter clogging. It is reusable and reduces maintenance burden.

• Ventilation and Exhaust

The "Generator Condition Monitor (GCM)" is a device that detects hot spots (abnormal overheating) in the insulation materials of hydrogen-cooled generators at an early stage. Each type of insulation material has a specific thermal degradation onset temperature, and the epoxy-based insulation used in hydrogen-cooled generators begins to degrade when heated to 200-210°C, releasing a large amount of fine particles sized between 0.001 and 0.1 microns into the circulating hydrogen. It helps prevent major accidents in the important equipment of hydrogen-cooled generators and contributes to improving the reliability of the equipment. 【Features】 - Prevents major accidents in the important equipment of hydrogen-cooled generators before they occur. - Quickly detects changes in the concentration of fine particles and issues alarms. - Also responds to fine particles generated by arcs. - Manufactured since the early 1960s, with a track record of approximately 1,000 units delivered worldwide for hydrogen-cooled generators. - Releases a large amount of fine particles sized between 0.001 and 0.1 microns into the circulating hydrogen. *For more details, please refer to the PDF document or feel free to contact us.

• Other measurement, recording and measuring instruments

The "Hydrogen Purity Meter for Generators (GGA)" is a hydrogen gas purity meter that measures purity by monitoring the thermal conductivity of the gas. Equipped with a 3-range measurement sensor/analyzer, it can measure not only the hydrogen gas purity during normal operation but also the hydrogen gas concentration in CO2 gas and the air concentration in CO2 gas during gas replacement without the need for additional equipment. E/One provides the GGA not only as an independent sensor/analyzer but also in various system configurations tailored to customer requirements. 【Features】 ■ Equipped with a 3-range measurement sensor/analyzer ■ Capable of measuring hydrogen gas concentration in CO2 gas and air concentration in CO2 gas during gas replacement without the need for additional equipment ■ Customizable to fit on-site conditions, contributing to maximizing the efficiency of power generation facilities ■ The portable small hydrogen purity meter (PGA) can be used flexibly during maintenance and other operations *For more details, please refer to the PDF document or feel free to contact us.

• Other electronic measuring instruments

The "Hydrogen Gas Dryer (GGD)" is a two-tower, open reactivation type hydrogen gas dryer. It uses a GMPU-controlled system to monitor the efficiency of the dryer using measurements from dew point meters installed at the inlet and outlet of the hydrogen gas, determining when reactivation is necessary. Due to its two-tower design with two drying agent containers, while one is operating in drying mode, the other can be in standby or reactivation mode. 【Features】 ■ If the reactivation cycle time exceeds the set range, a timer controls the reactivation time. ■ Hydrogen from the generator system is used for reactivation and released into the atmosphere. ■ The amount of hydrogen used for a single reactivation is approximately 2 scfm for an average reactivation time of 2 to 3 hours. ■ Molecular Sieve is used as the drying agent.

• Drying Equipment

The manufacturer of this product has a history of over 70 years in producing tube cleaning equipment, and this tube cleaning machine is a highly reliable product with many achievements in North America. It features three main advantages, including reduced working time, decreased workload, and lower environmental impact. It can be used to clean the inner surfaces of tubes in general shell-and-tube heat exchangers that use turbo chillers, hot and cold water generators, absorption chillers, and cooling water. 【Features】 - The dirt removed by the brush is continuously washed away by water supplied to the brush rotation area, reducing the need for washing work. - There is significantly less water splatter, eliminating the need for extensive water splash prevention measures. - The brush rotation direction can be changed during the forward and return strokes, allowing for effective cleaning of tubes with internal grooves. - The brush operates at over 700 revolutions per minute, effectively cleaning the tubes.

• Other cleaning machines

The permanent fall protection vertical lifeline system "Lad-Saf" connects a cable sleeve that slides along a cable to the harness of a worker ascending or descending a ladder, preventing fall accidents. It installs wire cables permanently on ladders within factory buildings, ladders for tanks within factories, and ladders for supports of lifts and cable cars. It is recommended for preventing fall accidents for workers on vertical ladders and stairways. 【Features】 - Complies with U.S. fall protection standards (ANSI Z359.16) - Costs a fraction of that of ladders with back baskets or rail-type fall protection systems - Product lifespan of up to 10 years or more - Usable in harsh environments - Limits fall distance to within 1 meter during a fall - Can be installed on existing monkey ladders

• Other safety equipment

This product assists with the ascent and descent in wind power plants and tower cranes. It dramatically improves the working environment in wind power plants and tower cranes where workers must climb dozens of meters. By preventing fatigue accumulation, workers can focus on their primary tasks. 【Features】 ■ Manufactured by Capital Safety, a company with high sales in the fall protection equipment industry ■ The lifting power of the motor can be adjusted according to the user's weight ■ Powered by a 100V outlet, compatible with 50-60Hz ■ The motor weighs 9kg and is easy to remove ■ Only one motor is needed even when multiple systems are installed ■ Can be attached to existing monkey ladders

• Other safety equipment

Fall prevention equipment is used to prevent the body from falling during a "fall or drop" using ropes or straps. A full harness has multiple points to secure the body, which helps to distribute the impact when a fall occurs. It is a fall arrest device that reduces the burden on the body. 【Value Provided】 ■Preventing falls for workers ■Mitigating impact during a fall

• Other safety equipment

A lanyard is a fall protection device made of synthetic fiber rope or wire rope, consisting of hooks, D-rings, and retractors. We offer various types, including those specifically for positioning, restraint use, rope types, wire rope types, single and double attachments, and retractable types. By connecting body support (full harness, which is a fall arrest device) and anchors (safety blocks, vertical lifelines, horizontal lifelines, Flexiguard), it prevents the worker from falling.

• Other safety equipment

This system eliminates the risk of falls when working at heights, such as in corridors or on rooftops. The permanently installed fall prevention lifeline system HLL, made of stainless steel wire cables and implemented worldwide, significantly enhances safety when working at heights. The permanent fall prevention horizontal lifeline system 'HLL' involves installing wire cables or rails on walls, at foot level, or overhead, allowing users to connect their lanyards to sliders that run along the cables or rails, thereby preventing falls. With a design that reduces safety risks and the load on the structures where it is installed, it can be implemented not only in new buildings but also in existing ones. Developed specifically for fall prevention, this system is designed to meet European and American safety standards regarding fall distance, impact on the human body during a fall, and impact on the roof, contributing to user safety, work efficiency, and shock mitigation upon falling onto the roof.

• Other safety equipment

"Roll Grease" is a product designed for rapid emergency rescue from high places such as wind power plants, transmission towers, and commercial facilities. Generally, lifts or buckets are used for rescue from high places. However, rescues from high places without lifts or buckets are extremely difficult. Moreover, in situations where rescue is needed, time can be a matter of life and death. In urgent situations, one cannot wait for the rescue team to arrive for several tens of minutes. Our Roll Grease excels in situations where rescue is difficult and time is critical. 【Features】 ■ Easy to operate ■ Used for emergency rescue from high places ■ Lightweight and compact for easy portability ■ Descent speed is automatically controlled ■ Equipped with a wheel for winding up, used when detaching the person in need of rescue from the fall prevention system they are connected to.

• Other safety equipment

The anchor system is a system that provides anchor points for fall prevention in locations where it is difficult to install anchors for safety blocks and other equipment. It prevents falls by connecting the safety block installed on the anchor to the worker's full harness. We can propose products that meet customer requirements, such as portable and height-adjustable options.

• Other safety equipment

The "Flow Ice Generator" is an ice-making machine for the fishing industry, born in Germany. It rapidly cools seafood with extremely small ice particles of 0.1mm, maintaining freshness. Due to its effectiveness, the introduction of freezing systems using this product is progressing throughout Japan. Because the ice particles are very fine, they preserve freshness without damaging the fish, and those who have adopted it have evaluated it as beneficial for improving the quality of fresh fish. 【Features】 - The 0.1mm ice particles cover the surface of seafood without gaps, enabling rapid cooling and achieving freshness maintenance. - The smooth, round particles do not harm seafood, preserving quality. - Uniformly cools seafood. - A reliable product that has been loved by European fishing industry professionals for over 20 years.

• Other processing machines

This product is a negative pressure dust removal device made of polyethylene. It boasts very high durability. We offer three models: "Novair 700," "Novair 1000," and "Novair 2000."

• Dust collector

【Achievements are increasing in the Kanto region, including Tokyo】 'Rotopin' removes old coatings while simultaneously forming a surface roughness of over 25μm. A tungsten carbide peening head is attached to six flaps in the circumferential direction, which is then rotated at high speed to impact the substrate. In the case of thick coatings, the Rotopin flap can be replaced with a rotary cutter (removal width 50mm, weight 6kg). 【Features】 ■ Removal width: 60mm (with Rotopin flap) ■ Processing capacity: 2-3m²/H (typical example) - varies depending on the type and thickness of the coating.

• Other machine elements

The "Needle Scaler - Vibration Suppression Type" is a product designed to reduce vibration load on the operator through its vibration suppression mechanism. The 3mm diameter needle moves back and forth at high speed using compressed air, efficiently removing old paint from narrow areas and bolts. The needle features a unique chisel-shaped tip that demonstrates high stripping capability. 【Features】 ■ 3mm diameter needle moves back and forth at high speed using compressed air ■ Efficiently removes old paint from narrow areas and bolts ■ Needle has a unique chisel-shaped tip ■ Demonstrates high stripping capability ■ Reduces vibration load on the operator

• Other machine elements

The "Vacuum Suction and Collection Device" is a product designed for dustless painting and stripping tools equipped with an air filter. It can be carried on the back and can be suspended from the pipes of temporary scaffolding using the carrying belt. By combining it with commercially available disc grinders, "dustless work" becomes possible. 【Features】 ■ Can be carried on the back ■ Can be suspended from the pipes of temporary scaffolding using the carrying belt ■ Can be placed on the floor when the carrying device is removed ■ Equipped with an air filter ■ Enables dustless work when used in combination with commercially available disc grinders

• Dust collector

The "IFD Cyrus Pro" is an excellent early fire detection system with no false alarms. It is widely used in harsh installation environments such as coal conveyor systems, cable tunnels, power plants, refrigerated storage rooms, and facilities handling powdered materials, protecting equipment that could cause significant damage if operations are halted due to fire.

• Other safety equipment
• Other environmental equipment

Our company handles negative pressure dust collection devices that can be used for asbestos removal and the removal of harmful dust at construction sites. It is capable of removing 99.97% or more of 0.3μm particles with a HEPA filter. There are instances where it was used in large quantities for air purification to prevent mold growth in flood-damaged homes during Hurricane Katrina in the United States.

• Other air conditioning equipment
• Dust collector
• Air purifiers

Air purifiers with HEPA filters are used as simple negative pressure devices during emergencies such as infectious disease pandemics. They can be utilized in response to infectious diseases (such as COVID-19, influenza, tuberculosis, SARS, and measles) in situations requiring rapid action, such as negative pressure tents, infectious disease outpatient medical facilities, and elderly care facilities. As simple negative pressure devices, they can be widely used to convert existing rooms and spaces (such as patient rooms, examination rooms, and hallways) into negative pressure rooms at a low cost.

• Other air conditioning equipment
• Air purifiers
• Other safety and hygiene products

The manhole fall prevention and rescue system is a suitable product for enhancing safety during work in manholes and tanks. It consists of a "safety block with a winding function" that freely extends and contracts, and activates an internal locking mechanism to stop falls when an incident occurs, along with a "tripod" that can be adjusted to a maximum height of 2 meters. Please utilize it for fall prevention during manhole ascents and for emergency rescue operations when a worker loses consciousness.

• Other safety and hygiene products

Ultraviolet curing FRP sheets are a revolutionary product that does not require the impregnation of glass fibers. They can be cut to the desired size and adhered to metal or concrete that has been prepared with surface treatment, then cured using sunlight or UV lamps. This significantly simplifies on-site work for FRP lining and provides stable construction quality without variation due to environmental conditions or the skill level of workers. With properties such as rust resistance, weather resistance, abrasion resistance, impact resistance, and fire resistance, it protects valuable equipment from corrosion and erosion caused by the impact of airborne sand and gravel, which is difficult to achieve with paint. 【Features】 ■ Easy-to-install, strong FRP lining method ■ Protects metal and concrete with a 1.5mm thick FRP lining layer ■ Excellent impact resistance due to internal fiber structure, making it less prone to cracking ■ Over 30 years of proven performance in the Middle East ■ Highly resistant to acidic and alkaline environments

• Other safety and hygiene products
• Other consumables

The TIT-928 is a thermal camera that combines high-precision temperature measurement with surveillance capabilities, allowing for non-contact and rapid detection of the body temperature of multiple individuals up to 3 meters away (recommended range is 1 to 2.5 meters) using AI technology. It can operate as a standalone device with a one-to-one connection to a PC, and it is also capable of temperature measurement via LAN connection. By utilizing the alarm function, it can notify you with a warning sound when the detected temperature exceeds the specified value, even if you are not constantly monitoring the detection area. It can be used in public areas such as hospitals, schools, and terminals, as well as in warehouses and buildings where fire prevention is necessary. 【Features】 ■ Non-contact and rapid detection of the body temperature of multiple individuals up to 3 meters away ■ Alerts with a warning sound when the temperature exceeds the specified value ■ Facial recognition using surveillance cameras and AI ■ Temperature measurement with a thermal module ■ Easy temperature settings and alarm adjustments through a menu in Japanese

• Surveillance Cameras

We would like to introduce our video modem system, the 'VDS2100/2200'. With just one video signal cable, you can transmit both video signals and power (DC12). It can be extended up to 500 meters using coaxial cable. This is recommended when there is no power source near the camera. 【Features】 ■ Can be extended up to 500 meters using coaxial cable ■ Transmits both video signals and power (DC12) with one video signal cable ■ Includes VDS transmitter and receiver ■ Comes with a dedicated AC adapter ■ Power cable included

• Other image-related equipment

TI Trading provides excellent products from around the world that solve challenges that cannot be addressed by domestic products in Japan. We offer peripheral equipment for analog cameras, including "fixed focal length," "varifocal auto iris lenses," and "megapixel" options. The fixed focal length lens is of the "C mount" type, while all other lenses are of the "CS mount" type. Please feel free to contact us with any inquiries regarding our products. 【Product Lineup】 ■ Fixed Focal Length ■ Varifocal Auto Iris Lenses ■ Megapixel

• lens
• Surveillance Camera System

The "HS2" is an outdoor housing made of aluminum (with some parts made of resin). Its dimensions are L388×W101×H110 (mm), and it weighs approximately 1.0 kg. Our company provides excellent products from around the world to solve challenges that cannot be addressed by domestic products in Japan.

• Other machine elements

The "BR4" is a bracket for aluminum housing. Its dimensions are L295×W86×H99 (mm) and it weighs approximately 0.6 kg.

• bracket

The various connectors for analog cameras that we handle include "BNC-RCA conversion connectors," as well as solder-type "BNC connectors" and "extension connectors."

• Surveillance Camera System
• Other Connectors
• connector

TI Trading provides excellent products from around the world that solve challenges that cannot be addressed by domestic products in Japan. We offer the '3C-2V coaxial cable' for analog cameras, available in lengths of 50cm, 1m, 5m, 10m, and 20m.

• cable
• Surveillance Camera System