サンワ・エンタープライズ Product Lineup

The LQ6 series (for liquid cooling applications) features a sleek metal design and covers a temperature range up to 115°C, making it applicable for various liquid cooling uses, from device installation to on-site equipment. Additionally, the main unit adopts a well-established thumb latch (button type) that allows for easy and quick one-handed operation.

• Pipe Fittings

The "BAC series" is a coupling manufactured by the American company CPC, designed to disconnect by pulling with a certain force without operating the thumb latch, and to connect by inserting with a consistent force. This structure makes it ideal for scenes requiring speed, such as disconnecting hydration bags in sports fields including motorsports.

• Pipe Fittings

The PEEK coupling "PKC1" is a coupling designed for ultra-fine tubes, made primarily from the super engineering plastic "PEEK." Thanks to advanced molding technology, the PKC1 achieves excellent cost performance while maintaining high functionality, making it suitable for applications that require corrosion resistance and durability, which were previously only achievable with stainless steel or fluororesin. The coupling accommodates semi-rigid to rigid tubes with an outer diameter ranging from 1.6mm (1/16") to 3.2mm (1/8"). Considering its use with liquids, it is equipped with a standard shut-off valve that blocks the fluid passage when the coupling is disengaged. Operating pressure range: 0 to 1.0 MPa (at room temperature) Applicable temperature range: -20 to 130℃

• Piping Materials

By simply inserting the cut tube into the fitting, it simultaneously locks the tube in place and seals to prevent leaks. It is widely used in the fields of beverage dispensers, including beer and juice, as well as water purifiers.

• Pipe Fittings

One-touch connection for gas to liquid piping. Simply insert the tube to complete the connection. No special tools are required. Certified with the trusted NSF mark from the USA, it is suitable for various water treatment equipment and beverage/food piping. There are over 1,500 items in the lineup, compatible with inch and millimeter-sized tubes, as well as R and Rc threads.

• Pipe Fittings

The "Diba fitting" is a PEEK adapter designed to expand the variations of the micro-tubing system. It supports screw standards, tube sizes, conversions between semi-rigid and flexible tubes, and branching.

• Piping Materials

It can be used without flange processing, from semi-rigid tubes like Teflon to PEEK tubes. Additionally, a variety of adapters such as different diameters, T-shaped, and cross types are available, enabling various piping layouts.

• Pipe Fittings

In addition to basic shapes such as straight, L, T, Y, and cross types, we also offer JIS/ISO compatible screw adapters. Furthermore, for each shape, we provide multiple materials such as nylon, polypropylene, polyethylene, fluorine-based materials, and stainless steel, allowing you to freely choose the material according to the usage environment.

• Pipe Fittings

JACO fittings are plastic compression fittings for semi-rigid tubes. By block-forming a unique ferrule and compression nut, they enable simple and speedy tube connections. Additionally, since they do not use metal, they are lightweight and free from concerns about rust. They are ideal for liquid and air piping in applications such as beverage dispensers, water purifiers, medical devices, and general industrial equipment.

• Pipe Fittings

The "Needle Valve MNV Series" is an all-plastic needle valve from MARQUEST. It is available in four materials: versatile PVC and C-PVC, glass fiber reinforced polypropylene, and highly corrosion-resistant PVDF. These options allow for differentiation based on the fluid and application.

• valve

This is a pinch valve that is mounted on the flexible outer circumference of a tube, allowing for flow control without coming into contact with the fluid. The scale engraved on the body makes it easy to reproduce settings.

• valve

Small, lightweight plastic ball valve.

• valve

The "Needle Valve" is an all-plastic needle valve manufactured by MARQUEST. It is available in four materials: versatile PVC and C-PVC, glass fiber reinforced polypropylene, and highly corrosion-resistant PVDF. These options allow for differentiation based on the fluid and application.

• valve

The filter section can be selected from two types: SUS mesh and polyethylene sheet.

• filter

The "PIS system" is a small plastic strainer. The built-in stainless steel or resin element reduces problems caused by foreign matter entering the piping system. Its compact design makes it ideal for use in the limited space of smaller devices and equipment.

• filter

The "cabinet cooler" reduces overheating inside NC or CNC cabinets, electrical control panels, motor boxes, surveillance cameras, various measuring instruments, etc., protecting precision machinery and measuring instruments from malfunction or damage due to overheating. Additionally, the automatic exhaust mechanism of the cabinet cooler keeps the inside of the cabinet in a pressurized state with cooling air at all times, preventing the intrusion of dust and mist from outside the cabinet and protecting electronic devices from contamination. By using a thermostat and solenoid valve, it is possible to regulate the temperature inside the box and reduce the amount of compressed air consumed.

• Other environmental equipment

The "Line Blow" is an air tool that generates a uniform curtain-like airflow simply by connecting compressed air. It is available in a lineup ranging from 150mm to 900mm in width, depending on the usage conditions for tasks such as draining, drying, and blowing away. ◆ Are you having trouble selecting piping components? ◆ >>> Product selection is available at the Satellite Showroom <<< In April 2018, we opened a Satellite Showroom in Odaiba displaying approximately 2,500 items as a new initiative to improve customer satisfaction in industrial piping components. [See]・[Touch]・[Sit]・[Choose] Our specialized staff will assist you in product selection. Please feel free to contact us. For those coming by train: Get off at Yurikamome "Telecom Center" Station and walk about 2 minutes. 【Contact Information】 TEL: 048-871-0501 Satellite Showroom Weekdays: Monday to Friday 10:00 AM to 5:00 PM

• Hydraulic Equipment

The air amplification air blow nozzle "Round Blow" uses compressed air as its power source, sucking in a large amount of surrounding air and expelling it. The "Round Blow" can be used in two roles: as a vacuum system or as a powerful air blow device.

• nozzle

The cylindrical airflow generator "Circle Blow" is an air nozzle that emits a cylindrical stream of air at high speed from a thin slit, attracting and amplifying a large amount of surrounding air to create a powerful annular amplification flow. The amplified flow, which blows evenly and uniformly in 360°, is effective for draining, cleaning, drying, and cooling long products such as pipes, cables, and extrusion rods. The hole diameter ranges from 25mm to 180mm.

• Pneumatic Equipment

The jet blower is a palm-sized air volume amplifier that generates a powerful vacuum pressure by blowing compressed air from slits provided along the inner wall of the main body, attracting a large amount of surrounding air from one side while expelling a large volume of amplified air from the other side. With a duct hose, it can be used for dust collection and recovery of debris, smoke, and particulate or fibrous materials, as well as for pneumatic conveying. Without a duct hose, it can be used for draining water after cleaning products or parts, as well as for drying, cooling, and blowing away cutting chips and debris.

• Pneumatic Equipment

The conveyor back is a device that enables air transport through a powerful vacuum pressure generated by compressed air as the power source. It has no moving parts and does not require a power supply, making it effective in environments where explosion-proof measures are required, as well as for the transport and exhaust of gas and mist.

• Pneumatic Equipment

By installing it between the fluid and the pressure gauge, it protects the pressure gauge from corrosive or highly viscous fluids and prevents contamination of the fluid from the pressure gauge.

• Piping Materials

This is a blow nozzle that ranges from air volume amplification type to high thrust type. Air volume focused type Equivalent to direct injection into pipes with a diameter of 2 to 4 mm Material: Made of aluminum, stainless steel Thrust focused type Equivalent to direct injection into pipes with a diameter of 2 to 4 mm Material: Made of stainless steel

• nozzle

The compact and easy-to-operate Sanwa pneumatic equipment, including the ultra-low temperature air generator "Kolder," which boasts nearly 40 years of experience, contributes to environmental improvement and productivity enhancement in various manufacturing sites.

• Pneumatic Equipment

"CPC Couplings," a top brand for fluid piping couplings. The SNS1 series is categorized as "Micro Fittings," specifically designed for extremely thin tubes. Despite being the smallest size in the world for plastic couplings, it features the unique thumb latch mechanism that is synonymous with CPC Couplings, allowing for intuitive attachment and detachment. Its non-spill design prevents liquid drips and air contamination, making it ideal for handling high-purity fluids. Additionally, it helps prevent equipment failure and skin contact caused by liquid drips from chemical solutions.

• Pipe Fittings

"Smart Fitting" is an ultra-fine tube fitting that enables speedy and uniform tightening. The built-in ratchet mechanism produces a "clicking" sound, allowing for consistent tightening torque regardless of the operator. It is effective in preventing issues commonly associated with traditional fittings, such as tube disconnection due to over-tightening and fluid leakage due to insufficient tightening. Compatible tube sizes: 1/16" (1.6mm) to 1/8" (3.2mm)

• Pipe Fittings

Regardless of experience, it achieves reliable torque management for tightening through sound. The built-in ratchet mechanism ensures uniform tightening torque without selecting operators, indicated by a "clicking" sound. It is effective in preventing issues commonly associated with conventional fittings for microtubes, such as tube disconnection due to over-tightening and fluid leakage due to insufficient tightening.

• Pipe Fittings

"Quick Line" is a set product that assembles innovative compression fittings called "Smart Fittings" on standardized length tubes at both ends.

• tube

"PEEK Springs" are springs made from PEEK resin, which excels in strength, heat resistance, and chemical resistance. The method using PEEK wire achieves characteristics close to those of metal springs while providing high economic efficiency, and customization according to customer requirements is also easily possible.

• Spring

This is a small, lightweight plastic ball valve with a simple structure that allows for direct connection of tubes. Depending on the fluid and application, you can choose between two materials: glass fiber reinforced polypropylene and PVC, as well as the number of ports in 2WAY and 3WAY configurations.

• valve

This catalog clearly introduces the features and specifications of the high-quality fitting products "AVS Fittings" manufactured by the German company AVS Romer. You can choose from one-touch (push-in) types and ferrule types according to your application. The one-touch type offers over 30 different shapes, and materials used include PVDF, which has excellent chemical resistance; PPSU, known for its toughness and heat resistance; POM, which has high mechanical properties and oil resistance; and SUS316L, which excels in corrosion resistance. There are also auxiliary function products such as filters and valves that incorporate fittings. [Contents (excerpt)] ■ About AVS products ■ Introduction to product structure/materials ■ Introduction to fitting product specifications ■ Introduction to specifications of filter, valve, and coupling products *The catalog can be viewed via "PDF Download." Please feel free to contact us with any inquiries.

• Pipe Fittings