共立合金製作所 / 総代理店　エバーロイ商事株式会社 List of Products and Services

The Everloy air nozzle maximizes the use of compressed air. In pursuit of this philosophy, we devise various internal structures for nozzles and design the optimal air nozzle. To optimize the air nozzle, we believe it is important to ensure that it can perform effectively with minimal air volume while also maintaining an even distribution of the air velocity (impact force) that is ejected. At Everloy, we use cutting-edge fluid analysis to repeatedly simulate the uniformity of the impact force distribution, prototype based on these simulations, and verify the results through actual measurements before commercialization. Additionally, fluid analysis is also applied to compare different shapes. By comparing them, we analyze and understand the characteristics of various air nozzles, verifying which type is most suitable for energy saving, high impact force, low noise, and high efficiency, and we have published a number of developed nozzles. For more details, please contact us or refer to our catalog.

This is an air knife nozzle designed to maximize the uniform distribution of impact force in the nozzle width direction, allowing for powerful impact with low pressure loss. 【Features】 - Incredible uniformity across the entire spray width. - Complete water drainage capability. - Compatible with ultra-fine slits from 0.05 to 0.3 mm. - Supports lengths of over 2 meters. ★Demo unit rental service currently available★ We are offering a demo unit rental service for the slit air nozzle. Please use it as a reference for performance verification and specification determination before introduction. You can apply through the link below: "AK Type Slit Air Nozzle Rental Service Here."

The design was made to ensure an even velocity distribution through fluid analysis. The product is available in single-side supply and double-side supply types. 【Features】 - Dedicated for blower air - Compatible slit width (injection range) 100 to 4000 mm - Air supply ports can also be made with a threaded design ★Demo unit rental service currently available★ We are currently offering a demo unit rental service for the slit air nozzle. Please use it as a reference for performance verification and specification determination before introduction.

By reducing the unevenness of air blowing, we can decrease the total air consumption and further enhance noise reduction effectiveness. Optimizing factory air nozzles, when done properly, not only leads to lower noise levels but also contributes to energy savings. The air blaster is an air nozzle developed to meet such needs. Please feel free to contact us regarding optimization. 【Features】 - Unique internal design enables low noise operation. - The impact force distribution of the air is uniform across the spray width. - Due to the uniform distribution, it allows for even cooling and consistent blowing. - The spray thickness is thin, enabling high-impact and efficient blowing.

The blower-compatible type from the Air Blaster series is now available! This product was developed based on customer feedback requesting a "nozzle that can spray flat with a blower" as an energy-saving measure. 【Features】 - Made of PPS resin, which has excellent heat and chemical resistance. (Heat resistance temperature: 130℃) - More affordable and lighter compared to aluminum. - An energy-saving flat air nozzle compatible with blower air, which can significantly reduce energy costs compared to compressor air. - Capable of spraying a large volume of air from the blower at a width of 50mm. 【Applications】 - For draining water and oil from products and parts, blowing away during sorting, foreign object removal, and cleaning. - For cooling and drying boards, films, cotton materials, pipes, cans, etc., as well as draining and drying surfaces and interiors, and dust removal. - Various applications such as blocking outside air, dust, insects, and foreign objects (air curtains).

It concentrates the spray in a conical shape, providing a high impact. This nozzle is ideal for draining, drying, dust removal, and cooling of products and workpieces. 【Features】 - Energy-saving with the use of a blower. - High impact. 【Applications】 Draining, drying, cooling, dust removal, foreign object removal, cleaning of products and workpieces. *For more details, please contact us or download the catalog to view.

The orifice has a circular cross-section, and after the gas is contracted in the throat section, it passes through an outlet designed in a flared shape, jetting at a speed greater than the speed of sound at an angle of approximately 16°, achieving effective spot spraying. 【Features】 - High jet velocity can be achieved. - Excellent straightness.

With a simple internal structure, you can specify the width as needed, allowing for optimization tailored to the target object. (Please contact us as it may not be possible depending on the conditions.) We can accommodate requests such as needing a bit more width, wanting to increase the flow rate, or wanting to reduce the flow rate.

This is an air nozzle developed for the purpose of optimizing spot blowing, featuring low noise and uniform straightness, making it ideal for dust removal, water drainage, drying of products and parts, as well as for the removal of oil, dirt, and cooling.

A compact type from the Air Blaster series has arrived! This flat-type air nozzle has been developed with the concept of being "the most compact" to meet our customers' space-saving design needs. 【Features】 - Compact design with dimensions of 25mm in length, 30mm in width, and 10mm in thickness, weighing 5g, making it ideal for use in tight spaces. - Saves space during equipment design. - Made of PPS resin, which has excellent heat resistance and chemical resistance (heat resistance temperature: 130°C). 【Applications】 - For draining water and oil from products and parts, blowing away during sorting, removing foreign substances, and cleaning. - For cooling and drying plates, films, cotton materials, pipes, cans, etc., as well as draining and drying surfaces and interiors, and removing dust. - For various applications such as blocking outside air, dust, insects, and foreign substances (air curtains).

Air knife nozzle with a thin slit-shaped outlet. Designed for low pressure loss, it allows for strong impact and uniform air blow across the entire length of the slit. It is suitable for water removal, foreign object removal, drying, air curtains, etc., for wide products and parts lines! The nozzle can be manufactured in any width. (The KAK type can accommodate up to 2.4m, while the AK type and TAK type can accommodate up to 4m.) A product lineup compatible with compressors and blowers is available. Currently, we are offering a demo unit rental service! Please make use of it for performance evaluation and specification confirmation before implementation. *For detailed specifications and performance materials, please download the catalog for confirmation.

This nozzle is a slit air nozzle primarily used for draining and drying glass substrates. Unlike conventional slit air nozzles, it features two slits along the length, which enhances the water drainage and drying capabilities at each stage. Compared to arranging multiple nozzles, it contributes to a more compact equipment design and reduces air volume, while also improving the water drainage and drying capabilities of a single nozzle, leading to increased transport speeds and enhanced productivity. ★Demo unit rental service available★ Please use it as a reference for performance verification and specification determination before introduction. The slit length of the demo unit is 600mm. For more details, please contact us using the form below. *For detailed specifications and performance materials of the product, please download the catalog and check.

If you are a facility manager or designer struggling to select an air nozzle, please take a look! - I don't know which air nozzle is appropriate... - I want to easily compare the features of each... - I want to know if the selected air nozzle is suitable for its application... ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ We will guide you through the selection process using an easy-to-understand flowchart. In addition to our standard lineup, Everloy Group, a top manufacturer of custom nozzles, solves your challenges and requests with our spray nozzles and evaluation technology. If you have any concerns, please feel free to consult us.