共立合金製作所 / 総代理店　エバーロイ商事株式会社 List of Products and Services

The BN-type burner nozzle is a single-fluid nozzle with a hollow cone pattern that allows for a wide range of flow adjustment through the control of back pressure. It provides uniform spraying across the entire flow range and is suitable for applications such as combustion in oil heating systems, humidification, temperature control, and chemical spraying.

A rotating spray cleaning head for tank cleaning that can spray in a full 360°. Made from PTFE (resin) with excellent chemical resistance and corrosion resistance, it can handle both acidic and alkaline cleaning agents. By pressurizing the cleaning solution, the spray nozzle rotates, providing efficient cleaning power even at low pressure. It can be used for cleaning the inner walls of various filling machines and tanks in pharmaceuticals, food, and chemicals. 【Features】 ■ Capable of full 360° spraying! ■ Efficient cleaning power even at low pressure! ■ Excellent chemical resistance and corrosion resistance! ■ Suitable for both acidic and alkaline cleaning! 【Customizable Options Available】 We can accommodate requests for original nozzles tailored to your tank, beyond standard products (other than the 360° type). Customization is possible to fit specifications such as mounting on pipes or flanges and adjusting spray positions, so please feel free to consult with us. 【Rental Service Available!】 If you are considering implementation, please take advantage of our free demo unit rental service first. Quick performance evaluation is possible. Please apply through the link below: "Apply for Rental Service Here."

This is a nozzle capable of continuous laminar flow injection from extremely low pressure of 0.002 MPa to 0.01 MPa (maximum allowable pressure 0.1 MPa). Slit width: 100 to 3000 mm, slit thickness: 0.15 to 0.3 mm, allowing for a wide range of applications and product widths. ★Demo machine rental service available★ We are currently offering a demo machine rental service for the water knife. Please use it as a reference for performance verification and specification determination before introduction. For more details, please contact us using the form below!

The nozzle can create a fine and soft spray with small particles, achieving a fine particle diameter. It has a built-in clog-prevention filter. It is possible to disassemble and clean it, and only the nozzle tip can be replaced. There is also a type that has a built-in check valve in the nozzle body, which helps to suppress the discharge of residual liquid when turned off. It is widely used for applying deodorants, chemicals, rolling oils, rust preventives, and for cleaning purposes.

Even if the nozzle becomes clogged, by reducing the pressure, the orifice (nozzle opening) expands significantly, allowing foreign objects to be washed away without removing the nozzle. When the pressure is increased, it returns to the normal injection specifications. This nozzle is ideal for areas with poor water quality or where replacing or maintaining the nozzle is difficult.

The inner surface of the pipe can be cleaned with an even spray from a water curtain. It can be sprayed widely in a circular pattern. There are DNP...B type for rear spraying and DNP...F type for front spraying.

This is a spray nozzle that can lower the temperature by about 3°C during the summer due to the evaporative cooling effect, providing a natural refreshing sensation. The nozzle is equipped with a check valve to prevent liquid dripping, allowing for instant switching of the spray on and off.

By reducing the pressure, the orifice (nozzle) opens wide, allowing foreign objects to be washed away and resolving clogs. When the pressure is increased, it returns to a normal injection state. This nozzle is suitable for use in areas with poor water quality or where replacing or maintaining the nozzle is difficult. 【Examples of Use】 - Cleaning in equipment that is difficult to remove - Cleaning wire rolls and press rolls - Cleaning the wire and felt of a paper machine ★ A direct spray pattern type (SCJ type) is also available.

The standard full cone nozzle incorporates a component called a core, which imparts a swirling force to the fluid. The core has several grooves machined in a spiral shape, which reduces the passage path for the liquid. The KSFL type does not use this core, making it significantly less prone to clogging compared to a standard full cone nozzle (conical nozzle), and it is an ideal spray nozzle for clogging prevention.

The KSW type spiral nozzle is a spray nozzle that has no obstructions inside, making it ideal for preventing clogging. Applications: Gas humidification cooling, gas absorption, water cooling, dust prevention, foam suppression, defrosting, cleaning, flue gas desulfurization, chemical spraying Mounting thread: 1/4 to 4 inches Flow rate range: 4 to 2000 L/min (at 0.3 MPa) Spray angle: 80° and 90° (at 0.3 MPa)

A rotary spray cleaning head for tank cleaning that allows the spray nozzle rotating body to rotate and spray around the entire circumference by pressurizing the cleaning solution. It can be used for cleaning the inner walls of various filling machines, as well as the inner walls of tanks in pharmaceuticals, food, and chemicals. We can accommodate requests for original nozzles tailored to your tank, beyond standard products (other than the 360° type). Customization is possible to fit specifications, such as mounting on pipes or flanges and adjusting the spray position, so please feel free to consult with us. ★Demo unit rental service currently available★ We are offering a demo unit rental service for PTFE rotary nozzles. Please use it as a reference for performance verification and specification determination before introduction. For more details, please contact us using the form below. 【Features】 ■ Can spray around the entire circumference (360°) ■ Efficient cleaning power even at low pressure ■ Excellent chemical resistance and corrosion resistance ■ Suitable for both acidic and alkaline cleaning For more details, please contact us or download the catalog to view.

This is a very compact nozzle with an M5 screw for the mounting diameter. It is suitable for space-saving in various devices. By combining it with a dedicated swivel joint (BJM5), the spray direction can be adjusted as desired. The material used is stainless steel (standard SUS303), and it can be used at pressures up to 0.7 MPa. For more details, please feel free to contact us.

The combustion nozzles (oil burner nozzles) used in water heaters, grain dryers, and agricultural heating devices are one of our main products in our lineup. In particular, the kerosene burner nozzles used in oil water heaters have been supplied to many customers for over 30 years under a production system of tens of thousands of units per year and strict quality control. 〇 Simplex Burner Nozzle (KSN Type) This is a general nozzle for oil water heaters, heating devices, and dryers that adopts an ON-OFF control combustion method. Specifications are determined by the spray pattern, flow rate, and spread angle. Main Features: - Turn-down ratio of approximately 1:1 - Control method: ON-OFF control method 〇 Return Burner Nozzle (BN Type) This nozzle was developed for oil water heaters, oil heating devices, and dryers that adopt a proportional control combustion method. Unlike the simplex type, it allows for adjustment of the spray flow rate by providing a return flow path inside the nozzle. Main Features: - Turn-down ratio of approximately 4:1 - Control method: Proportional control method - The spray angle remains stable even when the spray flow rate changes, resulting in an even distribution of the spray - Since the spray flow rate can be controlled at a constant supply pressure, the particle size remains almost the same even when the spray flow rate changes.

The new pulse spray method allows for the effective application of minute amounts of press oil, which is difficult to achieve with dripping, sponge, or roller methods. **Benefits of Uniform Micro-Application** Enables uniform micro-application at a rate of 1mL/min. Expected cost reduction due to decreased oil usage. **Benefits of Improved Production Quality** Achieves a spray with minimal variation in application width even when changing the amount applied. Reduces product defects caused by uneven and unstable application amounts, extending mold lifespan. **Improvements in Work Environment and Efficiency** Realizes an airless spray with minimal overspray through a highly responsive ultra-fast valve. Made easier to handle with touch panel operation, error log management, digital control, and setting records. **We will exhibit at JIMTOF2024!** Live demonstrations will be conducted using demo units at the venue. Other two-fluid devices will also be on display. Please stop by! **[Exhibition Details]** Date: November 5 (Tuesday) to November 10 (Sunday), 2024, 9:00 AM to 5:00 PM (until 4:00 PM on the final day) Venue: Tokyo Big Sight Booth Number: West Hall 1 W1049 Kyoritsu Alloy Manufacturing Co., Ltd. / Everloy Trading Co., Ltd.