電子磁気工業 List of Products and Services

The "Light Check LCR/LCP/LCD-450" is a dye penetrant used to inspect fine surface opening defects that cannot be detected by the naked eye on the surface of inspected items. The defect detection accuracy meets inspection results in accordance with MIL standards, ASME standards, and others. It is ideal for inspecting opening defects in rolled metal products, cast parts, forged parts, welded areas, as well as opening defects in non-metal materials such as synthetic resins, ceramics, and glass. 【Features】 ■ Inspects fine surface opening defects ■ Dye penetrant ■ Defect detection accuracy complies with MIL standards, ASME standards, etc. ■ General-purpose aerosol type For more details, please refer to the catalog or feel free to contact us.

• Flaw detection testing

The "Tesla Gauge GT-301" is a compact residual magnetic measurement device ideal for measuring the residual magnetic flux density of magnetic materials and for simple measurements of permanent magnets. It has three measurement ranges: 30mT, 300mT, and 1000mT. It features an auto-zero function, peak hold function, DC/AC function, and auto power-off function. The dimensions are W77×D27×H140mm, and the weight is approximately 300g (including battery). 【Features】 ■ 4-digit display, 3 ranges ■ Auto-zero function, peak hold function ■ DC/AC function ■ Auto power-off function ■ Polarity indication For more details, please refer to the catalog or feel free to contact us.

• Flaw detection testing
• Other measurement, recording and measuring instruments

The "FY-8100" is a fluorescent magnetic powder that uses a high-brightness type of fluorescent pigment. Our magnetic powder is versatile, suitable for both precision inspection and rough material inspection, eliminating the need to stock multiple types of magnetic powders. 【Features】 ■ Versatile for both precision inspection and rough material inspection ■ Uses a high-brightness type of fluorescent pigment ■ Reduces eye fatigue during inspection work For more details, please refer to the catalog or feel free to contact us.

• Flaw detection testing

"Plus Light PRC-04" is a water-based magnetic powder dispersant with excellent dispersion properties for magnetic powder. It improves wettability on the workpiece and contributes to enhanced inspection accuracy. At a low concentration of 0.5%, it achieves dispersion and rust prevention effects, leading to reduced usage and costs. 【Features】 ■ Excellent magnetic powder dispersion ■ Improved wettability on the workpiece ■ Enhanced inspection accuracy ■ Reduced usage and costs For more details, please refer to the catalog or feel free to contact us.

• Flaw detection testing

"WP-1" is a water-soluble rust inhibitor that is used by mixing it with water at a concentration of about 2-5% when using inspection liquids. "WP-1 type" is an ideal rust inhibitor for magnetic particle testing as the rust-inhibiting components do not absorb ultraviolet light. 【Features】 ■ Water-soluble rust inhibitor ■ Rust-inhibiting components do not absorb ultraviolet light ■ Ideal rust inhibitor for magnetic particle testing For more details, please refer to the catalog or feel free to contact us.

• Flaw detection testing
• Rust Inhibitor

The "Light Eleven MRS-18/200" is a magnetic powder dispersant for oil dispersion that emphasizes safety regarding volatility, odor, and flammability as an alternative inspection liquid to kerosene. Please use it to improve the working environment, addressing issues such as hand irritation and odor caused by kerosene. 【Features】 ■ Inspection liquid alternative to kerosene ■ Focus on safety ■ Magnetic powder dispersant for oil dispersion ■ Improvement of the working environment For more details, please refer to the catalog or feel free to contact us.

• Flaw detection testing

"MIP-18/MIP-200" is a magnetic powder dispersant for oil dispersion that emphasizes safety aspects such as volatility, odor, and flammability as an inspection liquid alternative to kerosene. With a flash point of over 80°C, it poses a lower risk of ignition compared to kerosene, and with a flow point below -60°C, it can be used in low-temperature environments. It also reduces skin irritation and odor associated with kerosene, contributing to an improved working environment. 【Features】 ■ Low risk of ignition ■ Excellent dispersibility of magnetic powder ■ Less odor compared to conventional products ■ Superior fluidity at low temperatures For more details, please refer to the catalog or feel free to contact us.

• Flaw detection testing

The "NEO MAGNALITE FY-500C" is a concentrated fluorescent magnetic powder liquid that can be easily created by simply adding it to the magnetic powder tank. You can achieve the appropriate concentration of magnetic powder liquid without the need for dispersant and kneading, which improves workability. Even with increased brightness, it has a color tone that is gentle on the eyes. It is easy to manage and store. 【Features】 ■ Easy to create magnetic powder liquid ■ No need for dispersant and kneading ■ Improved workability ■ Eye-friendly color tone ■ Easy to manage and store For more details, please refer to the catalog or feel free to contact us.

• Flaw detection testing

The "MSM-1025S" is a measuring device capable of measuring magnetic saturation induction values. It can quickly and accurately measure the magnetic saturation point of magnetic materials. The magnetic field generator uses neodymium magnets and is one-third the size of conventional models. 【Features】 ■ Capable of measuring magnetic saturation induction values ■ Accurately measures the magnetic saturation point of magnetic materials ■ Uses neodymium magnets for the magnetic field generator ■ Ideal for quality control of superhard tools and more For more details, please refer to the catalog or feel free to contact us.

• Other measurement, recording and measuring instruments

The "Flux Meter FM-2000" is a flux meter equipped with a CR integration circuit using a high-gain IC amplifier. With its comparator function, it can display sorting for Hi, Go, and Lo, and automatic measurement can be performed through external control of DRIFT/MEAS and RESET. Thanks to the standard "RS-232C" interface, measurement data management on a computer is possible. It can accommodate input power of AC100V to 240V without the need for switching due to its wide design. 【Features】 ■ Standard equipped with three types of measurement modes ■ Measurement operations can be controlled via control input, enabling automation ■ Measurement data management on a computer is possible ■ Wide design of input power allows for compatibility without switching For more details, please refer to the catalog or feel free to contact us.

• Other measurement, recording and measuring instruments

The "High-Performance Flux Meter FMI-2000R" can stably measure magnetic flux changes from 1μWb to 2000mWb. With the peak hold function, you can easily measure the maximum value of the N pole or S pole. The peak-to-peak function allows for easy measurement of the sum of the maximum values of the N pole and S pole. By setting upper and lower limits through the comparison judgment function based on the values obtained from the peak hold and peak-to-peak functions, it outputs Hi, Pass, and Lo judgments. Additionally, the external control function allows for easy integration into automated inspection lines. 【Features】 ■ Simple operation with one function per key ■ Measurement values and judgment results are stored on a microSD card ■ Measurement operations can be controlled via control input, enabling automation ■ Power input supports AC100V to 240V ■ External control function allows for RESET and MEAS control from outside For more details, please refer to the catalog or feel free to contact us.

• Other measurement, recording and measuring instruments

As a best-selling model of the extreme gap magnetic flaw detector, it has been adopted in various flaw detection scenes. Its flaw detection capability clears the JIS test piece 7/50, and its lifting power also meets the American standard (ASTM E1444), demonstrating performance that exceeds catalog specifications.

• Flaw detection testing

The automatic flaw detection system comes standard with a vector display monitor, variable noise filter, and comparator unit, allowing for easy configuration of an automatic flaw detection system by integrating it into the inspection work transport line. <Features> - Vector LCD display suitable for automatic flaw detection - Equipped with various condition setting displays; easy condition setting via direct key switch - Easy configuration of the automatic flaw detection system by integrating it into existing inspection transport lines - Equipped with functionality for multi-channel operation with multiple units - Optional feature allows for selection of pre-set conditions from external sources for flaw detection For more details, please contact us or download the catalog.

• Flaw detection testing

**Features** GM-5122 Low Magnetic Field Gaussmeter - Measures the Earth's magnetic field at one ten-thousandth of its strength. - Accurately detects ultra-low magnetic fields that could not be measured before. LP-141A Low Permeability μ Meter - Can measure low permeability materials accurately in a short time. - Simplifies quality control of materials. MSM-1025S Magnetic Saturation Induction Measurement Device - Quickly and accurately measures the magnetic saturation point of magnetic materials. - The magnetic field generator uses neodymium magnets and is one-third the size of conventional models. For more details, please download the catalog or contact us.

• Other FA equipment

This device measures the surface of a magnetized cylindrical magnet (primarily the rotor or stator of a motor) using a Gauss meter to evaluate its magnetization state. The analysis data displays numerical values such as the maximum, minimum, and average peak values of each pole, as well as the angles and areas of each pole. It also provides a two-dimensional display with the X-axis representing angle (Deg) and the Y-axis representing magnetic flux density (Tesla), as well as a three-dimensional display with the X-axis for angle (Deg), the Y-axis for position along the rotation axis, and the Z-axis for magnetic flux density (Tesla). 【Features】 - Measures and evaluates the surface magnetic flux density of the magnetized magnet using a probe. - The Gauss meter and Hall probe support measurements in three axes, allowing for simultaneous evaluation of magnetic flux density in the X, Y, and Z directions (only for MA-7315). - Measurement data is output in CSV format, making it compatible with general-purpose spreadsheet software. - Available in two types: one for cylindrical evaluation and one for planar evaluation. ● For other functions and details, please download the catalog or contact us.

• Analytical Equipment and Devices