Suntex Co., Ltd. List of Products and Services

Features ■ Compliant with PCI Express [x4] ■ Supports PoCL (Camera Link Power Over) automatic detection ■ Supports 2-CH Camera Link based configuration ■ Acquisition pixel clock rate of 85MHz (per CH) ■ Equipped with 128MB DDR SDRAM at 200MHz ■ 4 TTL digital inputs/outputs and 2 trigger inputs ■ Supports 64-bit addressing memory ■ 2 serial communication ports

Features - PCI Express [x1] interface - 32-CH TTL digital input & 32-CH TTL digital output - Transfer speed: up to 12MB/s - Programmable timer pacer clock on board - Supports handshake transfer mode for digital I/O - Bus mastering DMA for both digital input and output - 5V power available via connector - Compact half-size PCB

Features ■ Four-color video digitizer operating in parallel ■ Supports 120fps, PCI Express x1 bus compatible ■ Compatible with color (PAL/NTSC) and monochrome (CCIR/EIA) cameras ■ Expandable up to 16 channels ■ Onboard TTL I/O lines ■ Built-in watchdog timer ■ User-friendly view creator utility ■ Software trigger support

Features ■ Four-color video digitizer operating in parallel ■ Supports 120fps (up to 32-bit), 33MHz/66MHz PCI bus ■ Compatible with color (PAL/NTSC) and monochrome (CCIR/EIA) cameras ■ Expandable up to 16 channels ■ Onboard TTL I/O lines ■ Built-in watchdog timer ■ User-friendly view creator utility ■ Software trigger support

■Compliant with PXI 2.0 ■3U Eurocard form factor, compliant with CompactPCI ■12 bit A/D resolution ■Maximum simultaneous update rate of 1MS/s ■4-CH x analog output (PXI-2501) ■8-CH x analog output (PXI-2502) ■Hardware-based arbitrary waveform generation ■Onboard 8k-sample D/A FIFO (PXI-2501)

■PXI 2.0 compliant ■3U Eurocard form factor, CompactPCI compliant ■64-CH single-ended or 32-CH differential analog input ■Maximum 3MS/s sampling rate (PXI-2204) ■12 bit A/D resolution (PXI-2204) ■16 bit A/D resolution (PXI-2205 & PXI-2206) ■Onboard 1K-sample A/D FIFO (PXI-2010) ■Bipolar or unipolar analog input

■PXI 2.0 compliant ■3U Eurocard form factor, CompactPCI compliant ■4-channel differential analog input ■14 bit A/D resolution (PXI-2010) ■16 bit A/D resolution (PXI-2005 & PXI-2006) ■Onboard 8 K-sample A/D FIFO (PXI-2010) ■Analog input bipolar

- PXI-based control - Direct control of PXI systems - Supports 32-bit/66MHz PCI interface - Maximum extension distance of 7 meters (with 1M extension cable, 3M, and 7M) - Comprehensive hardware and software transparency

Features - 24-bit sigma-delta ADC and DAC - 2-channel simultaneous analog input & 2-channel simultaneous analog output - 2-channel simultaneous update analog output - Software sampling rate up to 432KS/s - Programmable input range: ±40 V, ±10 V, ±3.16 V, ±1 V, ±0.316 V - Programmable output range: ±10 V, ±1 V, ±0.1 V - AC or DC input coupling, software selectable - Trigger I/O connector for external digital trigger signals - Multi-module synchronized 10MHz clock, PXI start trigger & PXI trigger bus

◾Maximum sampling rate of 100 MS/s ◾High-resolution 14-bit ADC ◾Analog input (maximum 100 MHz bandwidth) ◾512MB onboard storage memory ◾High-speed PXI Express bus interface ◾Scatter-Gather DMA data transfer for high-speed data streaming ◾Digital trigger input terminal

Features - 32-bit CompactPCI, PICMG2.0 Rev2.1 - Plug and play, IRQ & I/O addresses are automatically assigned by PCI BIOS. - 4 asynchronous communication ports (intelligent buffer) - 4 RS-422/485 ports - 2500 VRMS isolation voltage - Supports multiple operating systems. - Surge protector - Rugged DB37 connector

Features - PICMG 2.0 Revision 2.1 - 16-bit D/A resolution - 16-channel voltage (6216V) - 8-channel voltage output (6208A and 6208V) - 8-channel current output (6208A) - Bipolar analog output range - 4-channel TTL DI and 4-channel TTL DO - Rear I/O available

Features ■ 32-bit PCI bus (3.3V/5V) support ■ Hardware-based waveform generation ■ DNL less than 1 LSB ■ Trigger for digital waveform generation ■ 16-CH isolated digital input & 16-CH isolated digital output ■ 8-CH TTL DI and 8-CH TTL DO ■ 2-CH timer/counter, base clock: 40MHz ■ 4-CH PWM output ■ 3-CH encoder input supporting AB phase and CW/CCW ■ Supports synchronization of multiple cards via SSI bus (system synchronization interface)

Features ■ PC control from CompactPCI systems ■ Multi-chassis configuration for CompactPCI ■ Supports up to 2 PCI segments with PCI-8570 alone ■ Compliant with PCI Local Bus Specification Revision 2.2 ■ Compliant with PCI Bridge Architecture Specification Revision 1.1 ■ PCI bus expansion (up to 64bit, 66MHz) ■ StarFabric link: supports up to 528MB/s (64bit, 66MHz PCI) / up to 132MB/s (32bit, 33MHz PCI)

Features ■ PC control from PXI system ■ Multi-chassis configuration ■ Supports up to 2 PCI segments with a single PXI-8570 ■ Compliant with PXI specification Rev 2.0

Features - PICMG 2.0 Revision 2.1 - 8-CH SPDT relay - Non-latching relay - Onboard relay drive circuit - Relay output state feedback - 16-CH, isolated DI - Onboard DI low-pass filter processing - 2 external interrupt sources

- PICMG 2.0 Revision 2.1 support - Configuration of multiple I/O ports: 16-CH DI & 16-CH DO, 32-CH DI, or 32-CH DO - Maximum transfer speed: 80 MB/s - Scatter-gather DMA - Onboard 32K word FIFO - Onboard programmable timer pace clock for clock-driven DIO - Supports handshake DIO transfer mode

◾Hi-Speed USB 2.0 interface ◾16-CH 250 kS/s voltage input (USB-1901/1902) ◾8-CH 250 kS/s current input (USB-1903) ◾2-CH 1 MS/s voltage output (USB-1902/1903) ◾Equipped with analog and digital triggers ◾Includes test application

◾Maximum sampling rate of 2kS/s ◾High-resolution 24-bit 4-channel simultaneous sampling analog input ◾Hi-Speed USB 2.0 interface ◾Built-in signal conditioning circuit for high voltage/current/thermocouple/RTD/strain gauge/load cell measurements ◾Includes test application

◾Maximum sampling rate of 128kS/s ◾High-resolution 24-bit Sigma-Delta ADC ◾4-channel simultaneous sampling analog input ◾Hi-Speed USB 2.0 interface ◾Supports 2mA excitation output on each analog input channel for IEPE sensor measurement ◾Full auto-calibration

Features - USB 2.0 High Speed, USB bus-powered - 4-channel simultaneous sampling analog input (up to 2MS/s per channel) - 500VDC Isolation & 256M samples FIFO - Analog and digital trigger support - Removable screw terminal for module - USB cable with locking feature for secure connection - Comes with ready-to-use test application (U-Test) - Supported operating systems: Windows 7/8, Linux, and MAC

Features - Equipped with Intel Atom Quad-Core Processor E3845 1.91GHz - 2MP, 120FPS, monochrome global shutter CMOS sensor - Dustproof and waterproof structure with IP67 rated housing and M12 connector specifications - Supports advanced image processing - Supports additional GigE Vision 1 slave cameras, reducing TCO - Built-in PWM lighting control - Compatible with software such as STEMMER Common Vision Blox, MVTec HALCON, COGNEX VisionPro, Teledyne Dalsa Sherlock, Adaptive Vision Studio, Euresys Open eVision, etc. - Compatible with image acquisition standards such as GeniCam, GenTL, OpenCV, and OpenCL

Features - Equipped with Intel Atom Quad-Core Processor E3845 1.91GHz - 4MP, 60FPS, monochrome global shutter CMOS sensor - Dustproof and waterproof structure with IP67 rated housing and M12 connector specifications - Supports advanced image processing - Supports additional GigE Vision 1 slave cameras, reducing TCO - Built-in PWM lighting control - Compatible with software such as STEMMER Common Vision Blox, MVTec HALCON, COGNEX VisionPro, Teledyne Dalsa Sherlock, Adaptive Vision Studio, Euresys Open eVision, etc. - Compatible with image acquisition standards such as GeniCam, GenTL, OpenCV, and OpenCL

Features - Supported video signals: 2-CH 3G/HD/SD-SDI (1920x1080P/60fps) - Low latency, uncompressed video streaming support - High precision color format support: 12bit 4:4:4 1080i/60fps, 10bit 4:2:2 1080P/60fps - Supports cable lengths up to 100M (coaxial cable 75Ω) - Compatible with DirectShow, RS-485, and digital I/O - Compliant with PCI Express [x4] - Equipped with connection status LED

◾Simple GPIB connectivity for laptop computers ◾API support with NI-488.2 driver software ◾Full compliance with IEEE 488.1 and 488.2 ◾Fully compatible with the industrial standard VISA library ◾No GPIB cable required ◾Plug & Play compatible interface; GPIB cable required for device connection ◾USB 2.0 compatible ◾Maximum GPIB transfer speed: 1.2 MB/s

◾Hi-Speed USB 2.0 interface ◾Programmable digital filter removes unexpected glitches from input channels ◾Programmable DO/Relay initial status ◾32CH isolated digital input & 2CH counter (USB-7230) ◾8CH relay output & 8CH isolated digital input & 2CH counter (USB-7250) ◾2-CH frequency/event counters (USB-7230/7250) ◾Up to 2500 VRMS isolation voltage ◾Includes test application (U-Test)

◾Supports USB 1.1 interface ◾12-bit A/D resolution ◾Maximum sampling rate of 500 kS/s ◾8-channel differential input ◾4-CH simultaneous sampling capability ◾Onboard 4 K-sample A/D FIFO ◾Bipolar and unipolar analog input range ◾Programmable gain of 0.5x, 1x, 2x, 4x, 8x

◾Supports 16 DI channels and 16 DO channels ◾Transmission speed: 3/6/12 Mbps ◾Equipped with RJ-45 phone jack for easy installation ◾Compact single-board design that meets space constraints and cost-effective requirements ◾Fuse design to protect against overcurrent in digital output channels

◾Supports 16 DI channels and 16 DO channels ◾Transmission speed: 3/6/12 Mbps ◾Equipped with RJ-45 phone jack for easy installation ◾Compact single-board design that meets space constraints and cost-effective requirements

■Compliant with PXI 2.0 (PXI series) ■32 bit 3.3 V or 5 V PCI bus (DAQ series) ■PCI Express x1 interface (DAQe series) ■4-CH differential analog input ■Maximum 2 MS/s simultaneous sampling rate (PXI/DAQ/DAQe-2010) ■14 bit A/D resolution (PXI/DAQ/DAQe-2010) ■16 bit A/D resolution (PXI/DAQ/DAQe-2005, PXI/DAQ/DAQe-2006, PXI/DAQ/DAQe-2016) ■Maximum 8 K-sample A/D FIFO (PXI/DAQ/DAQe-2010) ■Analog input bipolar/unipolar ■Programmable gain x1, x2, x4, x8

■32 bit 3.3V or 5V PCI bus (DAQ series) ■PCI Express x1 interface (DAQe series) ■Compliant with PXI Rev2.2 (PXI series) ■64-CH single-ended / 32-CH differential analog input ■Maximum 3 MS/s sampling rate (PXI/DAQ/DAQe-2204) ■12-bit A/D resolution (PXI/DAQ/DAQe-2204) ■16-bit A/D resolution (PXI/DAQ/DAQe-2206, PXI/DAQ/DAQe-2205) ■Onboard 1K sample A/D FIFO ■Analog input range bipolar/unipolar ■Programmable gain x1, x2, x4, x5, x8, x10, x20, x40, x50, x200 (PXI/DAQ/DAQe-2204) x1, x2, x4, x8 (PXI/DAQ/DAQe-2206 & PXI/DAQ/DAQe-2205)

■32 bit 3.3V or 5V PCI bus (DAQ series) ■PCI Express x1 interface (DAQe series) ■PXI Rev2.2 compliant (PXI series) ■Analog input 96-CH single-ended / 48-CH differential input ■Maximum 3 Ms/s sampling rate ■12 bit A/D resolution ■Analog/digital trigger ■Bus mastering DMA ■Auto calibration ■Multiple card synchronization

■32 bit 3.3 V or 5 V PCI bus (DAQ series) ■PCI Express x1 interface (DAQe series) ■16-CH single-ended / 8-CH differential input ■16 bit A/D resolution with a maximum sampling rate of 250kS/second ■Analog/Digital trigger ■2-CH 12bit 1MS/s analog output with waveform generation function (PXI/DAQ/DAQe-2214) ■Bus mastering DMA ■Auto calibration ■Multiple card synchronization

■32 bit 3.3V or 5V PCI bus (DAQ series) ■PCI Express x1 interface (DAQe series) ■PXI Rev2.2 compliant (PXI series) ■12-bit multiplying D/A resolution ■Maximum continuous update rate of 1 MS/s ■4 CH analog output (PXI/DAQ/DAQe-2501) ■8 CH analog output (PXI/DAQ/DAQe-2502) ■Hardware arbitrary waveform generation ■Onboard 8 K sample D/A FIFO (PXI/DAQ/DAQe-2501) ■Onboard 16 K sample D/A FIFO (PXI/DAQ/DAQe-2502)

■PXI 2.2 compliant ■8/16-channel differential analog input ■Synchronize PXI trigger bus with multiple cards ■16-bit A/D resolution ■Programmable gain x1, x4 ■Analog input bipolar ■Onboard 8 K-sample memory data storage (16 KB) ■4-channel TTL digital input/output

■ Independent network operation in single/dual mode ■ Programmable timer interrupt ■ Equipped with RJ-45 phone jack for easy installation ■ Software-selectable transmission speed and mode ■ Support for HSL-HUB3 and HSL repeater ■ DI data transmission interrupt ■ Any channel of all IDs can be set for interrupt

■32 bit 5V PCI bus (PCI series) ■Compliant with PXI PICMG2.0 Rev2.1 (cPCI-8554) ■16-CH isolated input & 16-CH isolated output (PCI-7230, LPCIe-7230, cPCI-7230) ■32-CH isolated input (PCI-7233) ■32-CH isolated output (PCI-7234) ■Input section isolation withstand voltage 5000VRMS (PCI-7230, PCI-7233) ■Output section maximum sink current 500mA (PCI-7230, PCI-7234)

■32 bit 5V PCI bus (PCI series) ■16-CH isolated input & 16-CH isolated output (PCI-7230, LPCIe-7230, cPCI-7230) ■32-CH isolated input (PCI-7233) ■32-CH isolated output (PCI-7234) ■Input section: isolation withstand voltage 5000VRMS (PCI-7230, PCI-7233) ■Output section: maximum sink current 500mA (PCI-7230, PCI-7234)

■PXI PICMG2.0 Rev2.1 compliant (cPCI-7248) ■16-CH isolated input & 16-CH isolated output (PCI-7230, LPCIe-7230, cPCI-7230) ■32-CH isolated input (PCI-7233) ■32-CH isolated output (PCI-7234) ■Input section isolation withstand voltage 5000VRMS (PCI-7230, PCI-7233) ■Output section maximum sink current 500mA (PCI-7230, PCI-7234)

■32 bit 3.3V or 5V PCI bus (DAQ series) ■PCI Express x1 interface (DAQe series) ■Compliant with PXI Rev2.2 (PXI series) ■64-CH single-ended / 32-CH differential analog input ■Maximum 3 MS/s sampling rate (PXI/DAQ/DAQe-2204) ■12-bit A/D resolution (PXI/DAQ/DAQe-2204) ■16-bit A/D resolution (PXI/DAQ/DAQe-2206, PXI/DAQ/DAQe-2205) ■Onboard 1K sample A/D FIFO ■Analog input range bipolar/unipolar ■Programmable gain x1, x2, x4, x5, x8, x10, x20, x40, x50, x200 (PXI/DAQ/DAQe-2204) x1, x2, x4, x8 (PXI/DAQ/DAQe-2206 & PXI/DAQ/DAQe-2205)

■32bit 3.3V or 5V PCI bus ■14-bit A/D maximum 65MS/S sampling rate (external clock) ■Maximum 130MS/s sampling rate (external clock, ping-pong method) ■2 CH single-ended bipolar input ■Onboard SDRAM up to 512 MB ■Analog and digital trigger ■Fully automatic calibration ■Multiple card synchronization

■32 bit 3.3V & 5V PCI bus ■64-CH isolated input & 64-CH isolated output (PCI-7442) ■128-CH isolated input (PCI-7443) ■128-CH isolated output (PCI-7444) ■Input section: isolation withstand voltage 1250VRMS ■Output section: maximum sink current 300mA

Features - Compliant with PCI Express [x4] - Supports four independent gigabit Ethernet ports - IEEE 1588 support, PTP technology - Supports PoE compliant with IEEE802.3af (Power over Ethernet) - Jumbo frame support (9KB) - Link aggregation support - Automatic detection and classification of powered devices (PD)

Features - Compliant with PCI Express [x4] - Supports two independent Gigabit Ethernet ports - Jumbo frame support (9KB) - Link aggregation support - Automatic detection and classification of powered devices (PD)

Features - PCI Express [x4] - Supports 2 Gigabit Ethernet ports - IEEE802.3at PoE+ compliant - Compatible with multiple cards and cameras in a single system - Extended temperature support (0 to 70°C without frame drops) - PoE protection (overcurrent, overvoltage, automatic power supply adjustment) - User-friendly PoE power management utility and API