Suntex Co., Ltd. List of Products and Services

Features ■ 24-port 10/100/1000BASE-T RJ45 copper ■ Redundant power supply with 100-240V AC or 30-60V DC (with polarity reverse protection) ■ IP30 metal case ■ 19-inch rack mount design ■ 6KV DC power and 6KV DC Ethernet ESD protection ■ Operating temperature: -10 to 60°C (AC power), -40 to 75°C (DC power)

Features ■ 10/100/1000BASE-T with 802.3bt Ultra PoE ports x 8 ■ 10/100/1000BASE-T ports x 2 ■ 1G/10G SFP+ ports x 2 ■ Supports up to 240 watts PoE/Remote PoE power protocol ■ Up to 75 watts per PoE port ■ 13-inch desktop size

Features ■ 4 x QSFP28 switch ports, each port supporting 1 x 199GbE and 1 x 40GbE ■ Private VLAN and GVRP for IEEE 802.1Q VLAN management ■ IP multicast features: IGMP snooping v1/v2/v3 and PIM DM/SM ■ IP routing protocols: Layer 3 IPv4/IPv6 routing, RIP, OSPF, BGP, PBR

Features ■ Hardware IPv6/IPv4 Layer 3 Static Routing ■ Supports Modbus TCP/IP protocol for factory automation ■ 2 slots for 10GBASE-SR/LR SFP compatible with 1000BASE-SX/LX/BX SFP ■ Redundant power design: 36–60V DC / 48–56V DC

Features ■ Built-in isolated 16-channel digital input ■ 2 x RJ45 bus interfaces ■ LED indicators for output status confirmation ■ Removable terminal block connector ■ Maximum distance between sites up to 100m (100BASE-TX) ■ Verified with EitherCAT compliance test tool

Features ■ Built-in insulated 16-channel digital output ■ 2 x RJ45 bus interfaces ■ LED indicators for output status confirmation ■ Removable terminal block connector ■ Inter-site distance of up to 100m (100BASE-TX) ■ Verified with EitherCAT compliance testing tool

Features ■ Capable of operating anywhere with a combination of battery, solar, wind, and hydro power ■ 4-port 10/100/1000BASE-T with 802.3at PoE ■ 24V DC output terminal block ■ Operating environment: -10 to 60°C ■ Web interface for remote management ■ USB backup & restore system ■ IP30 aluminum case ■ DIN rail and wall mount design ■ Supports operating temperature of -10 to 60°C ■ Supports ESD 6KV DC Ethernet protection ■ Redundant power design with wide power input of 24V to 45V DC

Features ■ Equipped with a 2.4-inch color LCD touch screen with management functions ■ IPv4/IPv6 VLAN routing ■ Power supply for each PoE port: supports up to 75 watts; total PoE budget (maximum) 400/600 watts ■ PoE schedule/power recycling schedule/PD (Powered Device) alive check function ■ 100–240V AC for switch/PoE, 36–60V DC for switch

Features ■ Equipped with a 2.4-inch color LCD touch screen with management functions ■ IPv4/IPv6 VLAN routing ■ PoE+ equipped with 4 ports of 10/100/1000BASE-T 802.3at ■ Firewall with 802.1Q VLAN security ■ Supports dynamic IP, static IP, PPPoE, L2TP, PPTP ■ USB backup & restore system

Features ■Interface Two RJ45 interfaces - 1 port for data + power output - 1 port for data input 1 DC 52-56V input power socket 1 PoE mode (standard/legacy) DIP switch ■PoE Compliant with IEEE 802.3af / at / bt PoE endspan/midspan PSE Supports up to 95 watts of PoE power on PoE ports Automatic detection of PoE IEEE 802.3af / at / bt devices and damage from improper installation Real-time monitoring of total PoE usage Automatic detection of DC input voltage Remote power supply up to 100m

Features ■ Equipped with passive PoE PD, BNC x 1 port ■ Equipped with 802.3bt Ultra PoE PSE, 10/100/1000T RJ45 x 1 port ■ Eliminates power cables by using PoE over coaxial/UTP/telephone lines ■ Power and Ethernet data transmission over coaxial up to 600m ■ Power and Ethernet data transmission over UTP/telephone lines up to 400m ■ Compliant with IEEE 802.3at/bt Power over Ethernet PD on RJ45 port ■ Supports up to 60 watts of PoE power (varies with power supply and cable distance) ■ Automatic detection of remote PD ■ Plug and play with no configuration required ■ LED indicators for power, SYS, PAIR, and PoE in use ■ IP30 slim type metal case

Features ■ Equipped with passive PoE PD, BNC x 1 port ■ Equipped with 802.3bt Ultra PoE PSE, 10/100/1000T RJ45 x 1 port ■ Eliminates power cables by using PoE over coaxial/UTP/telephone lines ■ Power and Ethernet data transmission over coaxial up to 600m ■ Power and Ethernet data transmission over UTP/telephone lines up to 400m ■ Compliant with IEEE 802.3at/bt Power over Ethernet PD on RJ45 port ■ Supports up to 60 watts of PoE power (varies with power supply and cable distance) ■ Automatic detection of remote PD ■ Plug and play with no configuration required ■ LED indicators for power, SYS, PAIR, and PoE in use ■ IP30 slim type metal case ■ Compact size; DIN rail or wall mount design ■ Supports 6KV DC Ethernet ESD protection

Features ■ Hardware-based 10/100Mbps, half/full duplex and 1000Mbps full duplex mode, flow control, auto-negotiation, auto MDI/MDI-X ■ Store-and-forward mode with wire-speed filtering and forwarding rate ■ IEEE 802.3x flow control for full duplex operation and backpressure for half duplex operation ■ Integrated address lookup engine, supporting 2K absolute MAC addresses ■ Supports 9K jumbo frames in 1000Mbps duplex mode ■ Automatic address learning and address aging ■ Supports CSMA/CD protocol ■ IP63 rated aluminum case ■ Wall mount design ■ Supports 2000 VDC Ethernet ESD protection ■ Operating temperature of -40 to 75°C ■ No external power cable required for installation ■ Plug and play installation

Features ■ IP30 metal case ■ DIN rail and wall mount design ■ Redundant power supply with 12-48V DC and reverse polarity protection ■ 24V AC power input ■ Supports 6000V DC Ethernet ESD protection ■ Operating temperature range of -40 to 75°C

Features ■ Equipped with a 2.4-inch color LCD touchscreen with management functions ■ IPv4/IPv6 VLAN routing ■ Power supply for each PoE port: supports up to 75 watts; total PoE budget (maximum) 400 watts ■ PoE schedule/power recycling schedule/PD (Powered Device) alive check function

Features ■ Equipped with a 2.4-inch color LCD touchscreen with management functions ■ IPv4/IPv6 VLAN routing ■ Power supply for each PoE port: supports up to 75 watts; total PoE budget (maximum) 400 watts ■ PoE scheduling/power recycling schedule/PD (Powered Device) alive check function ■ Redundant AC/DC power supply to ensure continuous operation: 100-240V AC for switch/PoE, 36-60V DC for switch

Features ■ IP30 metal case ■ DIN rail and wall mount design ■ Redundant power supply with 12-48V DC and polarity reverse protection ■ 24V AC power input ■ Supports 6000V DC Ethernet ESD protection ■ Operating temperature range of -40 to 75℃

Features ■ Redundant power design for 12-48V DC/24V AC ■ IPv6/IPv4 Web, Telnet/SNMP management ■ 802.1Q VLAN, MSTP/IGMP snooping ■ Static route support ■ ERPS ring support ■ PTP protocol transparent mode support ■ IP30 metal case ■ DIN rail and wall mount design ■ 24V AC power input available ■ 12-48V DC redundant power (with reverse polarity protection) ■ 5KV DC Ethernet ESD protection ■ Operating temperature -40 to 75°C

Features ■ Multi-gigabit Ethernet with high flexibility ■ 10/100/1000/2500BASE-T x 8 ports / 30W PoE + injector ■ PoE scheduling / power recycling schedule / PD (Powered Device) alive check function ■ IPv6/IPv4 Layer 3 static routing ■ ONVIF detection support ■ Compliant with IEEE 802.3at Power over Ethernet Plus / end-span PSE ■ Power supply for up to 8 IEEE 802.3af / 802.3at devices ■ Supports up to 36 watts of PoE power per PoE port ■ Automatic detection of powered devices (PD) ■ Circuit protection to prevent power interference between ports ■ Remote power supply up to 100m ■ IP30 aluminum case ■ DIN rail and wall mount design ■ Redundant power supply with 48-56V DC and reverse polarity protection ■ Supports 6000V DC Ethernet ESD protection ■ Operating temperature of -40 to 75°C

Features ■ Compliant with IEEE 802.3at Power over Ethernet Plus, endspan/midspan PSE ■ IEEE 802.3af PoE and backward compatibility ■ Up to 16 ports for IEEE 802.3af / IEEE 802.3at / ultra PoE devices ■ Supports a maximum of 75 watts of PoE power per PoE port ■ Automatic detection of powered devices (PD) ■ Circuit protection prevents power interference between ports ■ Remote power supply up to 100 meters

Features ■ Compliant with IEEE 802.3at Power over Ethernet Plus, endspan/midspan PSE ■ Backward compatibility with IEEE 802.3af PoE ■ Up to 16 ports for IEEE 802.3af / IEEE 802.3at / ultra PoE devices ■ Supports a maximum of 75 watts of PoE power per PoE port ■ Automatic detection of powered devices (PD) ■ Circuit protection prevents power interference between ports ■ Remote power supply up to 100 meters ■ Redundant 100–240V AC / 36–60V DC dual power supply ■ Active-active redundant power failure protection ■ Backup for critical power outages with a single power supply ■ Fault tolerance and resilience

Features ■ Compatible with IEEE 802.3ae 10 Gb Ethernet ■ Compact RJ45 connector ■ Compliant with SFP+ MSA ■ SFF-8472 optical transceiver diagnostic monitoring interface ■ Maximum transmission distance of 300m with 50/125μm multimode fiber optic cable ■ Maximum transmission distance of 60km with 9/125μm single-mode fiber optic cable ■ High cost efficiency up to 30m with UTP cable ■ 10Gb Ethernet communication with Cat6a/Cat7 cables ■ Plug-and-play installation

Features ■ IEEE 802.3ae 10 Gb Ethernet compatible ■ Compact RJ45 connector ■ SFP+ MSA compliant ■ SFF-8472 optical transceiver diagnostic monitoring interface ■ Maximum transmission distance of 300m with 50/125μm multimode fiber optic cable ■ Maximum transmission distance of 60km with 9/125μm single-mode fiber optic cable ■ High cost efficiency up to 30m with UTP cable ■ 10Gb Ethernet communication with Cat6a/Cat7 cables ■ Plug-and-play installation

Features ■Camera • 1 / 2.8" Sony Exmor progressive scan CMOS sensor • 3.6mm, F1.2 fixed lens • Minimum illumination: 0.01 lux (color) @ F1.2, 0 lux (B/W) @ IR on • Maximum resolution 1920 x 1080 • Built-in effective IR illumination up to 20-25m ■Video and Audio • H.264/H.265 video compression • Simultaneous multi-stream support • Up to 30fps frame rate at all resolutions • DNR to improve image quality in low light • WDR function • High-quality two-way audio ■Network and Configuration • Compliant with IEEE 802.3af PoE interface • Selectable RTSP, FTP, and PLANET DDNS protocols ■Easy Installation and Management • ONVIF compliant • IP66 waterproof and dustproof rating • Intelligent motion detection alarm • Windows-based utility or web interface

Features ■Camera • 1 / 2.8" Sony Exmor progressive scan CMOS sensor • 3.6mm, F1.2 fixed lens • Minimum illumination: 0.01 lux (color) @ F1.2, 0 lux (B/W) @ IR on • Maximum resolution 1920 x 1080 • Built-in effective IR illumination up to 15–20m ■Video and Audio • H.264/H.265 video compression • Simultaneous multi-stream support • Up to 30fps frame rate at all resolutions • DNR to enhance image quality in low light • WDR function • High-quality two-way audio ■Network and Configuration • Compliant with IEEE 802.3af PoE interface • Selectable RTSP, FTP, and PLANET DDNS protocols ■Easy Installation and Management • ONVIF compliant • IP66 waterproof and dustproof rating • Intelligent motion detection alarm • Windows-based utility or web interface

Features ■ 4-port 10/100/1000BASE-T ■ Dynamic IP support, Static IP, PPPoE, L2TP, PPTP ■ USB backup & restore system ■ IP30 metal case

Features ■ 4-Port Gigabit 802.3bt PoE+ ■ Compliant with 802.3bt ■ IP30 rated aluminum case ■ Wall mount and DIN rail ■ Supports 6000 VDC Ethernet ESD protection ■ Operating temperature -40 to 75℃ ■ No external power cable required for installation

Features ■ RJ45 TP connectors × 1 ■ Compliant with IEEE 802.3bt/at/af PoE ■ Compact size ■ Easy and quick to test ■ Operating temperature of 0 to 50°C

Features ■ Universal AC input/Full range ■ Effectively prevents short circuits, electrical circuit overloads, and overvoltage ■ Low power consumption < 0.75W ■ 100% full load burn-in (testing to ensure no defects in products before shipment)

Features ■ Universal AC input/Full range ■ Effectively prevents short circuits, electrical circuit overloads, overvoltage, and overheating ■ 100% full load burn-in (testing to confirm no defects in products before shipment)

Features ■ Gigabit managed Ethernet switch boasting high flexibility ■ PoE scheduling/power recycling schedule/PD (Powered Device) alive check function ■ IPv6/IPv4 Layer 3 static routing ■ ONVIF detection support ■ Compliant with IEEE 802.3at Power over Ethernet Plus/endspan PSE ■ Power supply for up to 8 IEEE 802.3at devices ■ Supports up to 36 watts of PoE power per PoE port ■ Automatic detection of powered devices (PD) ■ Circuit protection to prevent power interference between ports ■ Remote power supply up to 100m ■ IP30 aluminum case ■ DIN rail and wall mount design ■ Redundant power supply with 48-56V DC and reverse polarity protection ■ Supports 5000V DC Ethernet ESD protection ■ Operating temperature range of -40 to 75℃

Features ■ Gigabit Ethernet switch boasting high flexibility ■ Power supply for up to 4 IEEE 802.3at devices ■ Supports up to 95 watts of PoE power per PoE port ■ Automatic detection of powered devices (PD) ■ Circuit protection to prevent power interference between ports ■ Remote power supply up to 100m ■ IP30 aluminum case ■ DIN rail and wall mount design ■ Redundant power supply with 48-54V DC and reverse polarity protection ■ Operating temperature range of -40 to 75℃

Features ■ IP67 metal case ■ DIN rail and wall mount design ■ Redundant power supply with 12-56V DC and reverse polarity protection ■ Operating temperature range of -40 to 75℃

Features ■ IP30 metal case ■ DIN rail and wall mount design ■ Redundant power supply with 12-48V DC and reverse polarity protection ■ Operating temperature of -20 to 70℃

Features ■ Equipped with passive PoE PD, 1 BNC port ■ Equipped with 802.3bt Ultra PoE PSE, 1 10/100T port (RJ45) ■ Maximum transmission distance for PoC: 500m ■ Operating temperature: -20℃ to 70℃

Features ■ Hardware-based 10/100Mbps, half/full duplex and 1000Mbps full duplex mode, flow control, auto-negotiation, auto MDI/MDI-X ■ IEEE 802.3x flow control for full duplex operation and back pressure for half duplex operation ■ IP30 rated aluminum case ■ Wall mount and DIN rail ■ Supports 6000 VDC Ethernet ESD protection ■ Operating temperature of -40 to 75°C ■ No external power cable required for installation

Features ■ SFP module ■ Full-duplex operation with IEEE 802.3x flow control and half-duplex operation with backpressure ■ IP30 rated metal case ■ Wall mount and DIN rail ■ Supports 6000 VDC Ethernet ESD protection ■ Operating temperature -40 to 75°C ■ No external power cable required for installation

Features ■ Hardware-based 10/100Mbps, half/full duplex and 1000Mbps full duplex mode, flow control, auto-negotiation, auto MDI/MDI-X ■ IEEE 802.3x flow control for full duplex operation and back pressure for half duplex operation ■ IP30 rated aluminum case ■ Wall mount and DIN rail ■ Supports 6000 VDC Ethernet ESD protection ■ Operating temperature range of -40 to 75°C ■ No external power cable required for installation

Features ■ Hardware-based 10/100Mbps, half/full duplex and 1000Mbps full duplex mode, flow control, auto-negotiation, auto MDI/MDI-X ■ IEEE 802.3x flow control for full duplex operation and back pressure for half duplex operation ■ IP30 rated aluminum case ■ Wall mount and DIN rail ■ Supports 6000 VDC Ethernet ESD protection ■ Operating temperature of -40 to 75°C ■ No external power cable required for installation

Features ■ Hardware-based 10/100Mbps, half/full duplex and 1000Mbps full duplex mode, flow control, auto-negotiation, auto MDI/MDI-X ■ IEEE 802.3x flow control for full duplex operation and backpressure for half duplex operation ■ IP30 rated aluminum case ■ Wall mount and DIN rail ■ Supports 6000 VDC Ethernet ESD protection ■ Operating temperature range of -40 to 75°C

Features ■ Full-duplex operation with IEEE 802.3x flow control and half-duplex operation with back pressure ■ IP30 rated aluminum case ■ Wall mount and DIN rail ■ Supports 6000 VDC Ethernet ESD protection ■ Operating temperature from -30 to 75°C

Features ■ Compliant with IEEE 802.3, IEEE 802.3u 100Base-FX ■ Cost-efficient RS-232/422/485 Ethernet applications ■ IP30 metal case ■ Energy-saving operation

Features ■Interface 2-port RJ45 interface - 1 port data + power output - 1 port data input 1 AC100-240V input power socket ■Power over Ethernet 1 port gigabit high-power midspan PSE Compliant with IEEE 802.3at Power over Ethernet Plus Backward compatible with IEEE 802.3af Power over Ethernet Supports up to 30 watts of PoE power on PoE port Can accommodate up to one IEEE 802.3at device Supplies DC 50-54V power to devices with Ethernet ports via RJ45 Ethernet cable Automatic detection of PoE IEEE 802.3at/af equipment and devices that may be damaged by incorrect installation Remote powering up to 100m ■Hardware All-in-one design with internal power supply Compact size plastic case LED indicators for power LED and active LED (PoE capable)

Features ■Interface Two RJ45 interfaces - 1 port for data + power output - 1 port for data input - 1 AC100-240V input power socket ■Power over Ethernet Mid-span PSE for Power over Ethernet Compliant with IEEE 802.3at PoE Plus Backward compatible with IEEE 802.3af PD devices Supports up to 30 watts of PoE power on PoE+ port Automatically detects PoE IEEE 802.3at / 802.3af devices to prevent damage from incorrect installation Remote power supply up to 100m ■Hardware All-in-one compact size design Plastic case LED indicators for power LED and active LED (PoE available)

Features - Redundant power supply with dual power input and reverse polarity protection - DC 9-48V input or AC 24V input - Active-active redundant power failure protection - Backup for catastrophic power failure with a single power supply - Fault tolerance and resilience - IP30 metal case - Designed for DIN rail and wall mounting - Supports ESD 6KVDC Ethernet protection - Operating temperature range of -40 to 75°C - Industrial-grade free fall, shock resistance, and vibration resistance