ＩＢＳ List of Products and Services

The "ITOK Series" is a PSA oxygen gas generator that has evolved to be more multifunctional than conventional models through sequence control using PLC, while maintaining easy operation with a color touch panel display and comprehensive control. By incorporating a silencer box in the internal exhaust section of the package type, we have minimized noise during exhaust. Additionally, it is one of the smallest classes of PSA package types. 【Features】 ■ Compact ■ Touch panel operation ■ Purity over 90% ■ Generation rate of 0.8 to 12 Nm3/h *For more details, please refer to the PDF document or feel free to contact us.

• Gas Generator

The "ITOK Outdoor Series" is a compact touch panel-operated outdoor oxygen gas generation device. While maintaining easy operation and comprehensive control via a color touch panel display, it has evolved into a more multifunctional device compared to conventional models through sequence control using PLC. By incorporating a silencer box in the internal exhaust section of the package type, we have minimized noise during exhaust. 【Features】 ■ Drip-proof structure allows for outdoor installation ■ Usable for various purposes if an air source is available ■ Equipped with a 3.5-inch QVGA high-definition display touch panel ■ Low noise design ■ Outside the applicable range of second-class pressure vessels *For more details, please refer to the PDF materials or feel free to contact us.

• Gas Generator

The "ITOZ Outdoor Series" is a PSA oxygen gas generation system that allows for the control of the number of operating units based on the usage of O2 gas. By reducing the consumption of raw air, it decreases CP power consumption, resulting in significant energy savings and a reduction in CO2 emissions. Conventional two-tower PSA systems operate with two adsorption towers alternately adsorbing and desorbing, leading to intermittent O2 gas generation. The unit-controlled PSA shifts the adsorption and desorption timing with the combined units, achieving continuous O2 gas generation. As a result, the pressure within the O2 buffer tank is maintained constant, achieving a high discharge pressure of 0.3 to 0.35 MPa. Additionally, since the raw air is supplied sequentially from the air tank built into the main unit, it can protect the compressor without increasing tank capacity even when the generation amount increases. This allows for energy savings and space efficiency without the need for additional tanks when combined with an inverter-type compressor. 【Features】 ■ Outdoor installation type ■ High discharge pressure ■ Touch panel operation ■ Purity 90% ■ Generation amount 9–60 Nm3/h ■ Energy-saving operation function *For more details, please refer to the PDF document or feel free to contact us.

• Gas Generator

The "N2-DT604 Series" is a nitrogen gas generator that employs a unique membrane (membrane separation technology) for nitrogen gas generation. It requires no power supply or expensive, hazardous, and inconvenient nitrogen cylinders; it can be easily used by simply supplying compressed air. Inside the nitrogen gas generation device, there is a separation membrane called a membrane module, which consists of bundled hollow fibers. Compressed air passes through these hollow fibers to separate the gases and generate nitrogen gas (by separating it from other gases). Gas separation depends on the difference in gas separation rates, and the nitrogen concentration can be easily obtained at a high level by utilizing the dependence on the supply pressure of the compressed air. 【Features】 ■ Unique membrane separation technology for nitrogen gas generation ■ No sliding moving parts due to the membrane method ■ No need for expensive, hazardous, and inconvenient nitrogen cylinders ■ No power supply required ■ Compact design and lightweight, easy installation, saving valuable floor space ■ Usable for various applications *For more details, please refer to the PDF document or feel free to contact us.

• Nitrogen Gas Generator

The "CM[M] Series" is a general-purpose check valve designed to pursue stable operation. The centering function suppresses chattering, improving durability and reliability. Additionally, it employs O-ring seals and a metal-to-metal contact method to maintain a stable seal. A wide variety of seal materials are available. 【Features】 ■ Check valve (non-return valve) ■ Improved durability and reliability ■ Maintains a stable seal ■ Wide range of seal materials available ■ Standard nickel plating enhances corrosion resistance (brass products) *For more details, please refer to the PDF document or feel free to contact us.

• valve
• Water Hydraulic Equipment
• Pneumatic Equipment

The CF series is a versatile backflow prevention valve with a proven track record for gases, liquids, and special fluids. The double-touch method using O-rings and metal seals reduces the load on the sealing material. Its simple structure allows for a low price. A wide range of diameters and sealing materials are available. 【Features】 ■ Check valve (backflow valve, check valve, non-return valve) ■ Achieves low cost through simple structure ■ Reduces load on sealing material with double-touch method ■ Extensive lineup of diameters and sealing materials *For more details, please refer to the PDF document or feel free to contact us.

• valve
• Water Hydraulic Equipment
• Pneumatic Equipment

The "CH Series" is a check valve designed to prevent backflow of fluid when the pressure on the secondary side exceeds the pressure on the primary side. The SUS316 specification is suitable for high pressure applications up to 13MPa. With a double touch mechanism (O-ring + metal touch), the design reduces the load on the sealing material. 【Features】 ■ Check valve (backflow preventer, check valve, chack valve) ■ High pressure compatible ■ Reduced load on sealing material due to double touch mechanism ■ All stainless steel materials are made of SUS316 *For more details, please refer to the PDF document or feel free to contact us.

• valve
• Water Hydraulic Equipment
• Pneumatic Equipment

The "HVC Series" is a backflow prevention valve designed to handle high flow rates and high pressure. In addition to a design that reduces the load on the sealing material, it is a check valve that allows for flexible installation directions. It offers a wide range of diameters and sealing materials. The adoption of a new structure has achieved high flow rates (full bore design). 【Features】 ■ Check valve (backflow prevention valve) ■ Achieves high flow rates ■ Design that reduces the load on the sealing material ■ Wide range of diameters and sealing materials ■ Flexible installation direction *For more details, please refer to the PDF document or feel free to contact us.

• valve
• Water Hydraulic Equipment
• Pneumatic Equipment

The "C5 Series" is a backflow prevention valve that uses a special fluororesin spring. The resin in contact with the fluid is designed entirely with fluororesin. By selecting various sealing materials, it can be used with a wide range of fluids, including chemicals, solvents, and corrosive fluids. 【Features】 ■ Check valve (backflow prevention valve, check valve, chack valve) ■ The resin in contact with the fluid is designed entirely with fluororesin ■ Uses a special fluororesin spring ■ Usable with a wide range of fluids, including chemicals, solvents, and corrosive fluids *For more details, please refer to the PDF document or feel free to contact us.

• valve
• Water Hydraulic Equipment
• Pneumatic Equipment

The "CAM Series" is a backflow prevention valve that allows for arbitrary adjustment of cracking pressure. It is a check valve suitable for small-scale applications such as prototypes and research. It is designed to handle high pressure (maximum operating pressure: 20MPa) and is compact and lightweight. 【Features】 ■ Check valve (backflow prevention valve) ■ Arbitrary adjustment of cracking pressure is possible ■ High pressure compatible (maximum operating pressure: 20MPa) ■ Recommended for small-scale applications such as prototypes and research ■ Compact and lightweight design *For more details, please refer to the PDF document or feel free to contact us.

• valve
• Water Hydraulic Equipment
• Pneumatic Equipment

The "C8 Series" is a lightweight backflow prevention valve made of resin. It can be installed in any orientation. It is designed for low cracking and can accommodate various liquids in addition to tap water. 【Features】 ■ Check valve (backflow valve, check valve, chack valve) ■ Lightweight due to resin construction ■ Compatible with various liquids in addition to tap water ■ Flexible installation orientation ■ Low cracking specification *For more details, please refer to the PDF document or feel free to contact us.

• valve
• Water Hydraulic Equipment
• Pneumatic Equipment

The "CC Series" is a cartridge-type check valve suitable for integration into small devices, designed to prevent backflow. It is a lightweight and inexpensive check valve made of resin (spring SUS). It is also designed for low cracking, making it compatible with various liquids in addition to tap water. 【Features】 ■ Check valve (backflow prevention valve) ■ Recommended for integration into small devices due to its cartridge design ■ Lightweight and inexpensive due to its resin construction ■ Compatible with various liquids in addition to tap water ■ Low cracking specification *For more details, please refer to the PDF materials or feel free to contact us.

• valve
• Water Hydraulic Equipment
• Pneumatic Equipment

The "CP Series" is a backflow prevention valve made of PP (polypropylene). It standardly uses fluororubber. The body material is made of PP, which provides excellent corrosion resistance. It employs a spring mechanism, achieving stable sealing performance. 【Features】 ■ Check valve (backflow prevention valve, check valve, chack valve) ■ Made of resin, making it compact, lightweight, and inexpensive ■ The body material is made of PP, providing excellent corrosion resistance ■ Employs a spring mechanism for stable sealing performance ■ Standardly uses fluororubber *For more details, please refer to the PDF document or feel free to contact us.

• valve
• Water Hydraulic Equipment
• Pneumatic Equipment

The "CD Series" is a backflow prevention valve that uses a special spring made of fluororesin. The resin in contact with the fluid is composed of PFA and PTFE. Due to the tube outlet design, it does not require a specific fitting type. It is recommended for applications where chemical resistance is required. 【Features】 ■ Check valve (backflow prevention valve, check valve) ■ The resin in contact with the fluid is composed of PFA and PTFE ■ Due to the tube outlet design, it does not require a specific fitting type ■ Uses a special spring made of fluororesin ■ Recommended for applications where chemical resistance is required *For more details, please refer to the PDF materials or feel free to contact us.

• valve
• Water Hydraulic Equipment
• Pneumatic Equipment

The "RA Series" is a small pressure control valve that releases pressure to the atmosphere when the pressure inside the piping exceeds the set pressure. It is suitable for equipment used in low pressure and atmospheric release applications. 【Features】 ■ Atmospheric release type ■ High precision cracking performance and high sealing capability ■ Wide range of diameters available ■ Compact and lightweight ■ Cracking pressure set at the factory before shipment *For more details, please refer to the PDF document or feel free to contact us.

• valve
• Water Hydraulic Equipment
• Pneumatic Equipment

The "RL Series" is a small pressure control valve that releases pressure from the primary side to the secondary side when the pressure in the piping exceeds the set pressure. It is suitable for use with low-pressure, inline equipment (allowing piping on the secondary side). 【Features】 ■ Inline type (no external leakage) ■ High precision cracking performance and high sealing capability ■ Extensive range of diameters ■ Compact and lightweight ■ Cracking pressure set at the factory before shipment ■ Can accommodate perflo seals and is usable with organic solvents and corrosive gases *For more details, please refer to the PDF materials or feel free to contact us.

• valve
• Water Hydraulic Equipment
• Pneumatic Equipment

It is a small pressure control valve that releases pressure to the atmosphere when the pressure inside the piping exceeds the set pressure. The RHA series is ideal for small high-pressure devices. *For more details, please refer to the PDF document or feel free to contact us.

• valve

It is a small pressure control valve that releases pressure from the primary side to the secondary side when the pressure inside the piping exceeds the set pressure. The RHL series is ideal for compact high-pressure devices. ■ High-pressure compatible (maximum cracking pressure: 4.2 MPa) ■ By piping on the outlet side, it is optimal for collecting discharged liquid/gas after relief ■ Adjusted to the specified cracking pressure at the factory before shipment ■ Can be used with corrosive fluids by selecting the appropriate sealing material

• valve

It is a small pressure control valve that releases pressure from the primary side to the secondary side when the pressure inside the piping exceeds the set pressure. By installing an optional manual release mechanism, it is also possible to manually force a release. ■ The special packing suppresses valve oscillation. ■ The stainless steel body uses SCS14 (equivalent to SUS316), which has excellent corrosion resistance. ■ The cracking pressure can be adjusted arbitrarily from the outside (pressure adjusted at the time of factory shipment). ■ Suitable for liquids, inline type, and designed for high flow rates (compared to our products). *For more details, please refer to the PDF document or feel free to contact us.

• valve

The IBS "RM2 Series" is a compact pressure control valve that releases pressure from the primary side to the secondary side when the pressure inside the piping exceeds the set pressure. It can be used with chemicals, solvents, and corrosive fluids depending on the selection criteria. 【Features】 ■ Designed to reduce the risk of external leaks compared to the RM1 series ■ Sealing materials include EPDM and Kalrez, making it suitable for various fluids including chemicals and solvents ■ The set pressure can be easily adjusted externally, allowing for simple adjustments even after installation in the piping ■ Compact design with high flow specifications *For more details, please contact us or download the PDF.

• valve
• Water Hydraulic Equipment
• Pneumatic Equipment

The "RD Series" is a pressure control valve that releases pressure from the primary side to the secondary side when the pressure inside the piping exceeds the set pressure. It uses PFA fluoropolymer for the body, making it suitable for use with chemical solutions, solvents, and corrosive fluids. It does not require a specific fitting specification due to the tube outlet. 【Features】 - The cracking pressure can be easily adjusted as desired. - It does not require a specific fitting specification due to the tube outlet. - It employs a bellows system and Perfluoro sealing material, designed with consideration for corrosion and chemical resistance. *For more details, please refer to the PDF document or feel free to contact us.

• valve
• Water Hydraulic Equipment
• Pneumatic Equipment

It is a small pressure control valve that releases pressure to the atmosphere when the pressure inside the piping exceeds the set pressure. The RC series is ideal for equipment used in low-pressure, atmospheric venting applications. Additionally, the deflector cap prevents foreign objects from entering the valve interior in outdoor or exposed environments. ■ The deflector cap restricts the discharge direction during relief ■ Prevents foreign objects from entering the valve interior in outdoor or exposed environments ■ Achieves high precision cracking performance and high sealing capability ■ Cracking pressure is set at the factory before shipment

• valve

The "FMNV1 Series" is a micro needle valve that employs a non-rotating needle structure. Its smooth needle operation provides excellent reproducibility and achieves linear flow characteristics in relation to the rotation speed. Additionally, with a wide range of needle rotation speeds and a rich lineup of needle ranges and sealing materials, it is suitable for applications requiring flow adjustment of various fluids, as well as for applications needing very small flow rates or precise flow adjustments. 【Features】 ■ By adopting a non-rotating structure for the needle part, smooth and precise flow control is possible. ■ You can select a needle that meets your usage conditions from a wide range of needle options. ■ You can choose a body shape that fits your piping conditions from two types of body shapes. ■ A wide variety of sealing materials are available. *For more details, please refer to the PDF document or feel free to contact us.

• valve
• Water Hydraulic Equipment
• Pneumatic Equipment

The "FMNV2 Series" is a precision needle valve that employs a non-rotating needle structure. With a multi-dial display that constantly shows the needle rotation speed, it allows for more precise adjustment of the opening (flow rate) to be easily performed by anyone. It also supports panel mount installation, making it easy to install. 【Features】 ■ This product retains the needle function of the FMNV1 while adding a multi-dial display for rotation speed, enabling anyone to manage flow rates easily and reliably. ■ The multi-dial comes with a locking lever for one-touch locking. ■ It supports panel mount installation and is easy to install. ■ Like the FMNV1, a wide range of needle sizes and seal materials can be selected according to the fluid being used. *For more details, please refer to the PDF document or feel free to contact us.

• valve
• Water Hydraulic Equipment
• Pneumatic Equipment

The "Plastic Ejector (Injector)" is a fluid mixer made from PP and PVDF, materials that excel in corrosion resistance. Being made of plastic, it is lightweight and low-cost. It can also be used for mixing different fluids. 【Features】 ■ Lightweight and low-cost due to plastic construction ■ Body materials are PP and PVDF, which have excellent corrosion resistance ■ Over 80 models available ■ Usable for mixing different fluids *For more details, please refer to the PDF document or feel free to contact us.

• Water treatment equipment
• Water Hydraulic Equipment
• Special Pump

The "H2PD Series" is a super high-purity hydrogen gas generation device designed for alkaline electrolyte specifications. It can also be used as a carrier gas for gas chromatography. Additionally, the stored hydrogen gas inside the device is kept at 50cc or less at any pressure. Users can perform self-maintenance (electrolyte replacement) as well. We have overwhelming trust and a proven track record in the global market for gas generation devices for the analytical industry. 【Features】 ■ Purity of 99.99999% or higher, pressure of 0.4MPa ■ Two models available with maximum gas flow rates of 150cc/min and 300cc/min ■ Uses palladium in the electrolysis cell ■ Capable of generating pure and dry hydrogen gas *For more details, please refer to the PDF document or feel free to contact us.

• Gas Generator
• Analytical Equipment and Devices

The "H2PEM Series" is a high-purity hydrogen gas generation device capable of supplying combustion gas suitable for FID for up to 14 units. With an advanced purity management system and control circuitry, it allows for long hours of operation. The operating status is displayed through the color of the lighting, making it easy to check the water level and operational status. Additionally, we also offer the "H2PD Series" and "H2 Series," which can be used as carrier gases for gas chromatography. 【Features】 ■ Capable of supplying combustion gas suitable for FID for up to 14 units ■ Monitoring of operating status and remote control available via USB connection (optional) ■ CSA/UL/cUL/CE mark certified for research use ■ Compact design with a required bench area of only 0.09m² ■ No electrolyte required *For more details, please refer to the PDF materials or feel free to contact us.

• Gas Generator

The "Aera Transformer" is a digital mass flow controller suitable for various applications such as CAD, PVD, diffusion, and etching. The thin film growth and etching characteristics produced by this product boast excellent homogeneity and high reproducibility. With outstanding responsiveness, accuracy, and reproducibility, it enhances the productivity and yield of the equipment. 【Features】 ■ Multi-gas, multi-range ■ High-speed responsiveness ■ 100% metal seal, high-purity design ■ Compatible with DeviceNet, RS-485, and analog control *For more details, please refer to the PDF document or feel free to contact us.

• valve

The "Aera FC-R7700 Series" is a mass flow controller that performs well in various applications in the field. It demonstrates its capabilities in high-precision flow control and improves cost-effectiveness by adopting rubber seals. Additionally, it features a fast response time, stabilizing flow in less than 2 seconds after setting the value. 【Features】 ■ Elastomer (rubber) seals ■ Connections compliant with VCR, VCO, and Swagelok standards ■ Full-scale flow range from 10 sccm to 200 slm ■ Normally closed or normally open solenoid control valves ■ External leak rate of less than 1.0x10-7 Pa·m3/sec (He) *For more details, please refer to the PDF document or feel free to contact us.

• valve

The "Aera FC-R7800 Series" is a system that not only performs high-precision flow control but also features excellent airtightness due to its metal seals. It is suitable for major gas control applications. Thanks to advancements in technology, such as the incorporation of highly sensitive and fast-response small sensors, it demonstrates excellent controllability. 【Features】 ■ Corrosion-resistant design ■ Metal seal adoption ■ VCR and Swagelok compatible connections ■ Full-scale flow range from 10 sccm to 200 slm ■ Normally closed or normally open solenoid control valves *For more details, please refer to the PDF materials or feel free to contact us.

• valve

The "Aera PI-980" is a pressure-sensitive type mass flow controller developed in anticipation of the growing demand for next-generation semiconductor manufacturing processes. With excellent flow stability, it enhances process reproducibility between chambers and improves production yield. Additionally, it has been verified for accuracy with real gases and supports multi-gas and multi-range applications. 【Features】 - Capable of pressure-insensitive control (less affected by pressure) - High measurement accuracy and reproducibility - Compatible with IGS method - Verified for accuracy with real gases, supports multi-gas and multi-range - Programmable in the field *For more details, please refer to the PDF materials or feel free to contact us.

• valve

The "Aera FC-DR980" is a digital mass flow controller that offers excellent versatility and is compatible with many systems. With high-quality electronic components and a durable design, it withstands harsh operations and demonstrates outstanding long-term zero drift stability of less than 0.5% of full-scale flow even after more than a year. 【Features】 ■ Selectable modes: Analog, Analog/Digital, Digital ■ Piezo-controlled valve ■ Various alarm/diagnostic functions ■ Selectable gases and flow ranges 　※ Supported by multi-gas and multi-range specification models *For more details, please refer to the PDF documentation or feel free to contact us.

• valve