ジョー・プリンス竹下 List of Products and Services

The glass stairs commonly seen in hotels and stores not only provide a sophisticated impression but also make the space feel more open. The OT-G280-SUS bracket that supports the handrail of such glass stairs features a stainless steel mirror finish that does not interfere with the clear impression of the glass. It excels not only in aesthetic beauty but also in ease of installation, allowing for adjustments in both vertical direction and receiving angle, making the installation process smooth. ★POINT★ ● Bracket that extends the handrail pipe from the glass panel surface ● Compatible with round handrails ● Allows for position adjustment during handrail installation ● Made of stainless steel with excellent corrosion resistance ◇◇◇◇◇◇◇◇ Joe Prince Takeshita Co., Ltd. ◇◇◇◇◇◇◇◇ Feel free to consult Joe Prince regarding hardware components. Osaka Branch: 06-6747-2591 Tokyo Branch: 03-3633-8505 Nagoya Branch: 052-893-0792 Fukuoka Sales Office: 092-483-8566

• Glass

Glass stairs commonly seen in offices and stores. By using glass for the wall section of the handrail, you can create an open space without a sense of pressure. Supporting such stairs is the stainless steel surface-mounted fix, OT-G640-SUS. Here are three key points: ★POINT★ ● Glass can be temporarily attached to the shaft, allowing for smooth installation. ● The glass overhang dimensions can be adjusted. ● Allowable load: 200 kg (when using 4 units and installed vertically). Please consider this fix that enables smooth installation. ◇◇◇◇◇◇◇◇ Joe Prince Takeshita Co., Ltd. ◇◇◇◇◇◇◇◇ Feel free to consult Joe Prince regarding hardware components. Osaka Branch: 06-6747-2591 Tokyo Branch: 03-3633-8505 Nagoya Branch: 052-893-0792 Fukuoka Office: 092-483-8566

• Glass

Fixed bracket for holding glass panels. It has a flat head shape, so there is no protrusion on the glass surface. Additionally, the position of the glass can be adjusted. ★POINT★ ● Compatible glass thickness: OT-G360F-SUS-1: 8–18mm, OT-G360F-SUS-2: 8–12mm ● Allowable load: 70kg (when using 4 units and mounted vertically) ● Made of stainless steel, it has excellent corrosion resistance. ◇◇◇◇◇◇◇◇ Joe Prince Takeshita Co., Ltd. ◇◇◇◇◇◇◇◇ Feel free to consult Joe Prince regarding hardware components. Osaka Branch: 06-6747-2591 Tokyo Branch: 03-3633-8505 Nagoya Branch: 052-893-0792 Fukuoka Sales Office: 092-483-8566

• Glass

Fixed bracket for holding glass panels. Since it has a flat head shape, there is no protrusion on the glass surface. Additionally, the position of the glass can be adjusted. ★POINT★ ● Compatible glass thickness: 8–12mm ● Allowable load: 35kg (when using 4 units and mounted vertically) ● Made of stainless steel, excellent corrosion resistance. ◇◇◇◇◇◇◇◇ Joe Prince Takeshita Co., Ltd. ◇◇◇◇◇◇◇◇ Feel free to consult Joe Prince regarding hardware components. Osaka Branch: 06-6747-2591 Tokyo Branch: 03-3633-8505 Nagoya Branch: 052-893-0792 Fukuoka Sales Office: 092-483-8566

• Glass

Fixed bracket for holding glass panels. The OT-G650-SUS is thick but can accommodate glass as well. It allows for temporary attachment of the glass during installation, making it highly efficient for construction. ★POINT★ ● Compatible glass thickness: 8–12 mm (Contact us for thicknesses over 13 mm) ● Allowable load: 70 kg (when using 4 units and installed vertically) ● Made of stainless steel, offering excellent corrosion resistance. During glass installation, position adjustments of ±6 mm in the left-right direction, ±5 mm in the up-down direction, and a maximum of 4 mm in the depth direction can be made. ◇◇◇◇◇◇◇◇ Joe Prince Takeshita Co., Ltd. ◇◇◇◇◇◇◇◇ Feel free to consult Joe Prince regarding hardware components. Osaka Branch: 06-6747-2591 Tokyo Branch: 03-3633-8505 Nagoya Branch: 052-893-0792 Fukuoka Sales Office: 092-483-8566

• Glass

Fixed hardware for holding glass panels. It allows for temporary attachment of the glass during installation, enhancing workability. Additionally, it enables adjustment of the glass position. ★POINT★ ● Compatible glass thickness: OT-G360-SUS-1: 8–18mm, OT-G360-SUS-2: 8–12mm, OT-G600-SUS-1: 8–18mm ● Allowable load: 70kg (when using 4 units and mounted vertically) ● Made of stainless steel, offering excellent corrosion resistance. ◇◇◇◇◇◇◇◇ Joe Prince Takeshita Co., Ltd. ◇◇◇◇◇◇◇◇ Feel free to consult Joe Prince regarding hardware components. Osaka Branch: 06-6747-2591 Tokyo Branch: 03-3633-8505 Nagoya Branch: 052-893-0792 Fukuoka Sales Office: 092-483-8566

• Office furniture

Fixed hardware for holding glass panels. It can be temporarily attached during glass installation, making it highly efficient for construction. Additionally, it allows for adjustment of the glass position. ★POINT★ ● Compatible glass thickness: 8–12mm ● Allowable load: 35kg (when using 4 units and installed vertically) ● Made of stainless steel, offering excellent corrosion resistance. ◇◇◇◇◇◇◇◇ Joe Prince Takeshita Co., Ltd. ◇◇◇◇◇◇◇◇ Feel free to consult Joe Prince regarding hardware components. Osaka Branch: 06-6747-2591 Tokyo Branch: 03-3633-8505 Nagoya Branch: 052-893-0792 Fukuoka Sales Office: 092-483-8566

• Office furniture

The OT-B456-SUS is a glass hinge designed for large doors. ★POINT★ ● Equipped with a soft absorber, allowing the door to close slowly, preventing the risk of pinching fingers and avoiding forgetfulness in closing. ● With two units used, the allowable load is 60kg, making it suitable for large glass panels. ● Made of stainless steel, it has excellent corrosion resistance. It is not only effective in commercial facilities and glass-walled offices but also plays a significant role in barrier-free rooms (handicap rooms) in medical and welfare facilities, which are designed with wide openings for smooth access. During installation, the door can be adjusted by 5° in the closing direction while suspended, allowing for smooth installation work. Additionally, if the reaction force of the soft absorber is strong, it is possible to adjust the reaction force by changing the number of absorbers. ◇◇◇◇◇◇◇◇Joe Prince Takeshita Co., Ltd.◇◇◇◇◇◇◇◇ Please feel free to consult Joe Prince regarding hardware components. Osaka Branch: 06-6747-2591 Tokyo Branch: 03-3633-8505 Nagoya Branch: 052-893-0792 Fukuoka Sales Office: 092-483-8566

• Glass

The concealed hinges quietly excel in facilities such as office buildings, commercial spaces, and multi-unit residences. By installing them on the back side of doors, you can maintain the design integrity of the door while presenting a clean surface. The B-160 series offers a variety of options, including standard types, stainless steel versions, and those compatible with overlay doors, allowing you to choose hinges that suit your needs. We also provide self-closing types with springs that automatically close the door. ● Improved work efficiency on-site Thanks to a rivet design that prevents the pin from falling out, the axis and wing body remain intact, allowing for speedy work without needing to choose left or right. ● Dimension design that eliminates the need for a 2.3mm liner Our specifications do not require a 2.3mm liner, saving you the hassle and cost of installation. While reducing effort, costs, and waste, it still provides the same strength as when a liner is installed. Additionally, by using our pivot hinges in conjunction, you can prevent door warping, making it possible to accommodate large doors (door size H2100 or more). *Please contact us separately for inquiries. We invite you to try our concealed hinge series!

• Control Panel

Handles that are often seen on board and cross-covered doors or stone-clad doors in apartments and commercial facilities. We often hear opinions that these handles should be as inconspicuous as possible. To meet such needs, Joe Prince has realized a concealed handle with the "H-311-SUS." The "H-311-SUS" is a handle compatible with board and cross coverings or stone cladding, designed to be installed at the edge of the door, eliminating the need to attach handles or grips on the door surface, resulting in a clean appearance. - Made of stainless steel, it is strong and has excellent corrosion and heat resistance. - The door surface maintains a clean impression. - There is no need to attach handles or grips to the door surface, enhancing its design. - It can be installed flush from the edge of the door.

• Control Panel

The inspection door, gas chamber, and trunk room wire stopper for inspection openings are very popular. Here are three features! ● Easy installation. Just screw it in! Since the clamp and wire are pre-assembled, installation is straightforward. Simply attach the door-side fixing bracket to the door and the frame-side fixing bracket to the frame using the included screws in just two steps. ● Easy angle adjustment. Just pull the wire! Adjusting the door opening angle is simple; just decide on the desired angle and pull the wire. Additionally, if you want to increase the angle, you can easily adjust the wire length by pressing the protruding part of the clamp. ● Reduces impact when the door is opened By installing shock-absorbing rubber between the frame fixing bracket and the wire with a ball stop, it mitigates the impact when the door is opened. It can be installed on either side of the door without regard to left or right orientation, so there is no need to specify left or right-handed. Furthermore, it can be installed on both standard frames and sash frames without optional parts, making it cost-effective. This wire stopper for inspection openings excels in ease of installation. Please give it a try.

• Control Panel

●Made of stainless steel, it can be safely used in wet areas. ●The angle at the door tip can be adjusted up to approximately 5° while hanging on the door. ●It features a self-closing function at 25°. Glass partitions and glass doors create a high-quality space in hotel bathrooms and commercial facilities. Essential for such glass installations are glass hinges. Joe Prince offers a wide variety including normal types, gravity types, and heavy-duty types. This time, we will introduce the normal type, with a total of 5 variations. You can choose from glass panel mounting type, wall mounting type, and frame mounting type. Finishes include mirror, hairline, matte black, and upon order, gold, copper, and other finishes are available, allowing for coordination with the design of the space. Please give it a try. ◇◇◇◇◇◇◇◇Joe Prince Takeshita Co., Ltd.◇◇◇◇◇◇◇◇ Feel free to consult Joe Prince regarding hardware components. Osaka Branch: 06-6747-2591 Tokyo Branch: 03-3633-8505 Nagoya Branch: 052-893-0792 Fukuoka Sales Office: 092-483-8566

• Glass

●The allowable load is 60kg, making it suitable for large glass. ●Made of stainless steel, safe for use in wet areas. ●Equipped with a door edge position adjustment function. This glass hinge can be used for large glass. With the rotation axis set at the base, it allows for a wide opening width, contributing to the creation of a more open space. ◆Recommended for barrier-free rooms! There is an increasing number of facilities, such as medical and welfare institutions and hotels, that are establishing barrier-free rooms in their bathrooms. Designed to ensure smooth entry and exit for individuals using wheelchairs, the opening is wide for comfortable use. Our heavy glass hinge can accommodate glass door widths of up to 850mm (glass thickness 12mm) and 900mm (glass thickness 10mm), making it suitable for such environments. ◇◇◇◇◇◇◇◇Joe Prince Takeshita Co., Ltd.◇◇◇◇◇◇◇◇ Feel free to consult Joe Prince regarding hardware components. Osaka Branch: 06-6747-2591 Tokyo Branch: 03-3633-8505 Nagoya Branch: 052-893-0792 Fukuoka Sales Office: 092-483-8566

• Glass

Introducing the product "PT-180 Panel Clamp," which was born out of Joe Prince's consideration of what could be done during the COVID-19 pandemic. Acrylic partitions have become commonplace in stores and offices, but issues such as "I can't install it where I want" have arisen. This product solves those problems. The biggest feature of this panel clamp is that the part that holds the panel can rotate! It can rotate 360°, allowing for free adjustment of the installation angle to vertical, parallel, or diagonal. Additionally, installation is very easy and requires no tools. Installation is completed in two steps: Step 1 "Clamp onto the tabletop," Step 2 "Clamp the panel." Anyone can install it, and it can also be easily removed if not needed. 【Features】 ■ Adjustable installation angle! The part that holds the panel rotates 360 degrees. ■ Available in two types to match the shape of tabletops and other surfaces. ■ Two colors: white and black. *For more details, please refer to the PDF document or feel free to contact us.

• Vice Clamps

There is a growing demand for the intention to "hide as much as possible" hardware such as flat handles and hinges, as there is a desire not to show them aesthetically. In recent years, in tower-type condominiums, hotels, hospitals, and public facilities, there has been an increasing trend to emphasize design, such as using colored steel plates and stone cladding for corridor inspection openings. The "Hexagonal Cam Lock" is designed to minimize protrusion from the door surface to avoid compromising aesthetics. Additionally, by using optional accessories, it is possible to install it in a way that only the handle insertion hole is visible from the door surface. It also features a click sensation, making it easy to understand the locked and unlocked positions. 【Features】 ■ Only the handle insertion hole is visible from the front of the door (in the case of frame-in or hole-drilling specifications) ■ Installation method can be chosen by using optional accessories ■ Design with minimal protrusion on the surface (maximum 1.7 mm)

• Control Panel

There is a growing demand for the intention to "hide as much as possible" hardware such as flat handles and hinges, as people do not want them to be visually prominent. In recent years, in tower-type condominiums, hotels, hospitals, and public facilities, there has been an increasing trend to emphasize design, such as using colored steel plates and stone cladding for corridor inspection openings. The "Clearance Lock" is a product that pursues "ultimate simplicity" to meet such needs. It is installed so that it is embedded in the frame, so the only visible part from the front of the door is the handle insertion hole. It is unlocked using a dedicated handle (sold separately). When unlocking, simply rotating the handle causes the door to automatically open partially, eliminating the need for a knob. 【Features】 ■ No handle!? A simple design with nothing attached to the door surface ■ Locking is completed just by closing the door, with a one-action lock function ■ Can be installed on flush doors, meeting doors, and standard doors

• Control Panel