91~135 item / All 155 items
Displayed results
Added to bookmarks
Bookmarks listBookmark has been removed
Bookmarks listYou can't add any more bookmarks
By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.
Free membership registrationContact this company
Contact Us Online91~135 item / All 155 items
We would like to introduce a case where a shutter gate, with a part of the beam extended to serve as a roof for the approach, was manufactured and delivered by FIT GATE. Since the effective opening height of the shutter is H2500mm, the columns and beams were manufactured in segments and connected on-site. The extended beam, designed as a roof, was equipped with optional rain gutters to facilitate rainwater management. After the installation of the structure, the contractor applied the finishing touches, combining it with a stylish functional gatepost, resulting in a functional and fashionable gate. 【Case Overview】 ■ Dimensions: Approximately W8,685 × H3,225mm (total length) ■ Installation time: Approximately 4 hours *For more details, please refer to the related links or feel free to contact us.
Added to bookmarks
Bookmarks listBookmark has been removed
Bookmarks listYou can't add any more bookmarks
By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.
Free membership registrationWe would like to introduce a case where a shutter gate was manufactured and delivered as a single unit to a private residence in Aichi Prefecture. This time, it was a shutter case exposed type structure, and the shutter installation was arranged by the construction company. After the structure was installed, finishing work was carried out by the construction company, and it was completed. The use of the same tiles as the side walls of the entrance gate creates a sense of unity, and since it is almost the same height as the adjacent garage, it has been finished to give a cohesive appearance to the closed exterior. [Case Overview] ■ Dimensions: Approximately W6,300 × H2,925 mm ■ Installation Time: Approximately 3 hours *For more details, please refer to the related links or feel free to contact us.
Added to bookmarks
Bookmarks listBookmark has been removed
Bookmarks listYou can't add any more bookmarks
By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.
Free membership registrationWe would like to introduce a case where a shutter gate for two units was manufactured and delivered as a single unit FIT GATE. The dimensions are approximately W6,300 × H2,925 mm, and the installation time was about 3 hours. Normally, to allow for the carport roof to fit, the shutter gate's roof extends about 100 mm at the back, but this time we made it slightly larger at 150 mm. After the installation of the structure, finishing work such as tiling was carried out by the contractor. [Case Overview] ■ Dimensions: Approximately W6,300 × H2,925 mm ■ Installation Time: Approximately 3 hours *For more details, please refer to the related links or feel free to contact us.
Added to bookmarks
Bookmarks listBookmark has been removed
Bookmarks listYou can't add any more bookmarks
By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.
Free membership registrationHere is an example of a project where we manufactured and delivered a shutter gate for two units. The dimensions are approximately W6,200 × H2,925 mm, and the installation time was about 2 hours. Painting was done in the factory only on the part that touches the neighboring block wall. After the installation of the structure, finishing work such as tiling was carried out by the contractor. 【Project Overview】 ■ Dimensions: Approximately W6,200 × H2,925 mm ■ Installation Time: Approximately 2 hours *For more details, please refer to the related links or feel free to contact us.
Added to bookmarks
Bookmarks listBookmark has been removed
Bookmarks listYou can't add any more bookmarks
By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.
Free membership registrationWe would like to introduce a case where a shutter gate was manufactured and delivered as an entrance to a parking space. In this instance, the shutter installation was arranged by the contractor, so we were only requested to provide the framework. After the framework was installed, the contractor carried out the shutter installation and finished the walls to match the gate posts, resulting in a beautifully unified entrance surrounded by greenery. 【Case Overview】 ■ Dimensions: Approximately W4,590 × H2,925 mm ■ Installation Time: Approximately 2 hours *For more details, please refer to the related links or feel free to contact us.
Added to bookmarks
Bookmarks listBookmark has been removed
Bookmarks listYou can't add any more bookmarks
By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.
Free membership registrationWe manufactured and delivered a shutter gate for 2 units at FIT GATE. Due to the large structure, the columns and beams were divided, and connection work was carried out on-site. After the structure was installed, the wall finishing was done by the contractor, resulting in a high-quality shutter gate with a wood grain design. Please feel free to contact us when you need our services. 【Case Overview】 ■ Approximately W6,460 × H2,925 mm ■ Installation time: 5 hours ■ Finished with a high-quality shutter gate featuring a wood grain design *For more details, please refer to the related links or feel free to contact us.
Added to bookmarks
Bookmarks listBookmark has been removed
Bookmarks listYou can't add any more bookmarks
By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.
Free membership registrationWe manufactured and delivered a 6,700mm gate with a split structure. To reduce costs this time, we adopted an exposed shutter case type that is visible from the site side. The installation time was approximately 4 hours. The shutter was arranged separately by the contractor, and after delivery and installation, the mounting work was carried out on-site. 【Case Overview】 ■ Adopted an exposed shutter case type ■ Installation time was approximately 4 hours ■ Finished with a bright and natural gate area based on white ■ Enables smooth connection of the flow after getting out of the car *For more details, please refer to the related links or feel free to contact us.
Added to bookmarks
Bookmarks listBookmark has been removed
Bookmarks listYou can't add any more bookmarks
By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.
Free membership registrationWe would like to introduce a case where a gate that integrates a shutter gate and a privacy wall was manufactured and delivered by FIT GATE. Since it is installed in contact with the building, the shutter gate is designed as a case-exposed type to minimize depth. The shutter gate and the tall wall were manufactured separately and delivered on the same day, with connection work carried out on-site. 【Case Overview】 ■ The shutter gate is a case-exposed type ■ Approximately W10,180×H2,925mm (effective opening of the shutter gate is approximately W3,660×H2,300mm) ■ Finished as a delicate and calm gate *For more details, please refer to the related links or feel free to contact us.
Added to bookmarks
Bookmarks listBookmark has been removed
Bookmarks listYou can't add any more bookmarks
By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.
Free membership registrationWe would like to introduce a case where we manufactured and delivered a gate that integrates a shutter gate and a privacy wall. Due to the large structure, the shutter gate and privacy wall were manufactured separately and delivered on the same day using two 4-ton unic trucks. After the structure was installed, finishing work was carried out by the contractor. Black tiles that matched the residence were applied, resulting in a chic impression for the gate. 【Case Overview】 ■ Approximately W11,600 × H2,925 mm (roof dimensions) ■ Installation time: Approximately 4.5 hours ■ Finished with a chic impression ■ A clean design that ensures a smooth flow from the back view *For more details, please refer to the related links or feel free to contact us.
Added to bookmarks
Bookmarks listBookmark has been removed
Bookmarks listYou can't add any more bookmarks
By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.
Free membership registrationWe would like to introduce a case where a gate that integrates a shutter gate and a privacy wall was manufactured and delivered. Due to the size of the gate, the shutter gate and privacy wall were manufactured separately and connected on-site. After the installation of the structure, the finishing work was carried out by the contractor. Ivory-colored tiles that matched the residence were applied, resulting in an elegantly finished gate. 【Case Overview】 ■ Approximately W8,140 × H2,925 mm (roof dimensions) ■ Installation time: about 5 hours ■ Finished with an elegant impression ■ A cohesive gate area *For more details, please refer to the related links or feel free to contact us.
Added to bookmarks
Bookmarks listBookmark has been removed
Bookmarks listYou can't add any more bookmarks
By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.
Free membership registrationWe manufactured and delivered a gate that integrates a shutter gate with a tall wall at a private residence in Aichi Prefecture. The shutter gate and wall were divided into two parts for manufacturing and connected on-site. After the structure was installed, finishing work was carried out by the contractor, completing the gate. The presence of the wall not only provides privacy for the entrance but also enhances the luxurious feel unique to large gates. 【Case Overview】 ■ Approximately W9,650 × H2,925 mm ■ Installation time is about 4 hours ■ Luxurious feel unique to large gates ■ Finished with a functional and stylish gate area ■ Even with a tall wall, space can be effectively utilized *For more details, please refer to the related links or feel free to contact us.
Added to bookmarks
Bookmarks listBookmark has been removed
Bookmarks listYou can't add any more bookmarks
By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.
Free membership registrationWe manufactured and delivered a gate that integrates a shutter gate and a privacy wall at a private residence in a certain location in Tokyo, using FIT GATE. The dimensions are approximately W8,250×H2,925mm, and the installation time was about 4 hours. Due to the large structure, the shutter gate and wall were manufactured separately and connected on-site. 【Case Overview】 ■ Dimensions approximately W8,250×H2,925mm, installation time about 4 hours ■ Adopted a built-in type that conceals the shutter case from the property side ■ Finished as a simple and user-friendly gate *For more details, please refer to the related links or feel free to contact us.
Added to bookmarks
Bookmarks listBookmark has been removed
Bookmarks listYou can't add any more bookmarks
By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.
Free membership registrationWe would like to introduce a case where we manufactured and delivered a gate that integrates a shutter gate and a passage gate. Due to the large effective opening height of the shutter gate, it was manufactured by splitting the columns and beams, assembled on-site, and connected to the passage gate. Embedded materials such as posts and delivery boxes were installed at our factory, and the mounting position for the nameplate was reinforced. 【Case Overview】 ■ Approximately W10,000 × H3,025 mm (roof dimensions) ・ Effective opening of the shutter gate: W5,660 × H2,400 mm ■ Installation time: Approximately 4.5 hours *For more details, please refer to the related links or feel free to contact us.
Added to bookmarks
Bookmarks listBookmark has been removed
Bookmarks listYou can't add any more bookmarks
By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.
Free membership registrationWe have manufactured and delivered a large gate that integrates a shutter gate and a service entrance. Dimensions are approximately W13,000 × H2,925 mm, with an installation time of about 4 hours. Embedded products such as delivery boxes were installed in the factory using supplied materials, and due to the size of the large gate, it was manufactured in sections and connected on-site. 【Case Overview】 - Dimensions: approximately W13,000 × H2,925 mm - Installation time: about 4 hours - Embedded products such as delivery boxes were installed in the factory using supplied materials - The height of the service entrance was set lower when viewed from the back - Designed for rainwater management through drains with a slab roof - Finished as a cohesive gate that fits the width of the site *For more details, please refer to the related links or feel free to contact us.
Added to bookmarks
Bookmarks listBookmark has been removed
Bookmarks listYou can't add any more bookmarks
By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.
Free membership registrationThis is a case study of a gate that integrates a shutter gate and a side entrance, manufactured and delivered to a private residence in a certain location in Mie Prefecture. The installation was carried out on the same day using two 4-ton unic trucks. The shutter gate has a wide depth, and downlights provided by the client are installed on the property side. The side entrance features wood-patterned siding on the ceiling and decorative square lattice on the roof. Downlights provided by the client and a delivery box were installed at the factory before shipping. [Case Overview] ■ Approximately W9,725 × H2,925 (total length) ・Shutter Gate (approximately W6,290 × H2,925 mm) ・Side Entrance (approximately W3,435 × H2,575 mm) ■ Installation Time: Approximately 4 hours *For more details, please refer to the related links or feel free to contact us.
Added to bookmarks
Bookmarks listBookmark has been removed
Bookmarks listYou can't add any more bookmarks
By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.
Free membership registrationWe manufactured and delivered a large gate that integrates two shutter gates and a service door in three segments. On the same day, we delivered and performed the connection work on-site. The ceiling of the service door is covered with natural wood from the Hinoki family, laid over a waterproof base, and equipped with supplied downlights. Although it is a large gate, the installation was completed in one day. Additionally, the downlights installed in the delivery box and under the eaves of the shutter gate were attached in the factory before shipment. [Case Overview] - The ceiling of the service door is covered with natural wood from the Hinoki family over a waterproof base, with supplied downlights installed. - Dimensions approximately W12,830 × H2,925 mm, installation time approximately 4 hours. - Downlights were installed in the factory before shipment. - Finished with ivory-colored tiles that match the exterior walls of the house. *For more details, please refer to the related links or feel free to contact us.
Added to bookmarks
Bookmarks listBookmark has been removed
Bookmarks listYou can't add any more bookmarks
By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.
Free membership registrationWe manufactured and delivered a gate that integrates two shutter gates and a passage gate as separate components. The dimensions are approximately W9,400 × H3,035 mm, and the installation time is about 5 hours. The shutter features an exposed case type. After the installation of the structure, finishing work such as tile installation was carried out by the contractor, completing the gate. 【Case Overview】 ■ Dimensions: approximately W9,400 × H3,035 mm ■ Installation time: approximately 5 hours ■ Shutter features an exposed case type ■ Inside the factory, wood-patterned siding was installed on the passage gate's eaves, and supplied downlights and embedded posts were attached before shipping. *For more details, please refer to the related links or feel free to contact us.
Added to bookmarks
Bookmarks listBookmark has been removed
Bookmarks listYou can't add any more bookmarks
By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.
Free membership registrationWe would like to introduce a case where two shutter gates, a passage gate, and a privacy wall were integrated into a single gate. Although it is a large structure, all parts were delivered to the site on the same day, and the connection work was carried out. The gate is taller than the shutter gate at H3,100mm, but since it is constructed with a steel frame, it does not require supporting walls, allowing for the installation of the privacy wall without narrowing the parking space. 【Case Overview】 ■ Total Length: Approximately W15,415 × H3,100mm ■ Shutter Gate: Approximately W15,235 × H2,925mm (Effective Opening: W5,660 × H2,385mm) ■ Privacy Wall (FIT HIGH-WALL): Approximately W7,300 × H3,100 × D130mm ■ Installation Time: 5.5 hours *For more details, please refer to the related links or feel free to contact us.
Added to bookmarks
Bookmarks listBookmark has been removed
Bookmarks listYou can't add any more bookmarks
By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.
Free membership registrationWe would like to introduce a case where a shutter gate and a side gate were manufactured and delivered by FIT GATE as part of a renovation project around the entrance of a private residence in Gifu Prefecture. Due to the height of the shutter gate, it was manufactured with a split structure, and as an option, rain gutters were installed on the back of the roofs of both the shutter gate and the side gate to facilitate rainwater management. The eaves of the side gate are covered with wood-like siding, creating a design that connects with the residential area. [Case Overview] ■ Shutter Gate: Approximately W3,900 × H3,125 mm ■ Side Gate: Approximately W2,850 × H2,640 mm ■ FIT HIGH-WALL: Approximately W3,820 (outer diagonal) × H2,350 mm *For more details, please refer to the related links or feel free to contact us.
Added to bookmarks
Bookmarks listBookmark has been removed
Bookmarks listYou can't add any more bookmarks
By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.
Free membership registrationWe would like to introduce a case where a large gate that integrates a shutter gate and a service door was manufactured and delivered to a private residence in Gifu Prefecture. The installation work, including the FIT WALL installed to enclose the property, was carried out over several days. The gate, which integrates the shutter gate and service door, measures approximately W23,000 × H2,925 mm and was completed in one day. [Case Overview] - The gate that integrates the shutter gate and service door measures approximately W23,000 × H2,925 mm. - The wall continuing behind the gate is made of FIT WALL. - Downlights embedded in the structure transform the appearance into a luxurious impression at night. *For more details, please refer to the related links or feel free to contact us.
Added to bookmarks
Bookmarks listBookmark has been removed
Bookmarks listYou can't add any more bookmarks
By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.
Free membership registrationWe would like to introduce a case where we manufactured and delivered a FIT GATE as a shutter gate for a private residence in a certain location in Osaka Prefecture. Due to the deep design, the roof was made as a slab roof, and the supplied downlights were installed in the factory, creating a one-unit product. After the installation of the structure, the construction company carried out wall finishing and it was completed. A gate was installed behind the wall, which also serves as an entrance. [Case Overview] - The roof was made as a slab roof due to the deep design. - Supplied downlights were installed in the factory, creating a one-unit product. - Approximately W6,050mm × H2,925mm; installation time was about 3 hours. *For more details, please refer to the related links or feel free to contact us.
Added to bookmarks
Bookmarks listBookmark has been removed
Bookmarks listYou can't add any more bookmarks
By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.
Free membership registrationWe would like to introduce a case where a gate that integrates a shutter gate and an arch gate was manufactured with a split structure, and connection work was carried out on-site. The wall, which is the same height as the shutter gate that divides the garage space, was manufactured with FIT HIGH-WALL. The dimensions from the shutter gate to the wall are approximately W12,000 × H2,925 × D5,920 mm. [Case Overview] - The wall, which is the same height as the shutter gate that divides the garage space, was manufactured with FIT HIGH-WALL. - Installation time was approximately 6 hours. - The gate was finished with a gentle impression. *For more details, please refer to the related links or feel free to contact us.
Added to bookmarks
Bookmarks listBookmark has been removed
Bookmarks listYou can't add any more bookmarks
By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.
Free membership registrationWe would like to introduce a case where a large gate, approximately W13,800mm, was manufactured and delivered in segments. The installation time was about four and a half hours. The shutter section is a built-in type that does not show the shutter case from the property side, arranged by the construction company, and installation work was carried out on-site after setup. Downlights were installed in the shutter and arch sections at the factory, allowing for bright illumination at night, creating a different atmosphere around the gate compared to during the day. [Case Overview] - The shutter section is a built-in type that does not show the shutter case from the property side. - It creates a different atmosphere around the gate compared to during the day. - It has a sense of unity as it is integrated with the shutter gate. *For more details, please refer to the related links or feel free to contact us.
Added to bookmarks
Bookmarks listBookmark has been removed
Bookmarks listYou can't add any more bookmarks
By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.
Free membership registrationWe manufactured and delivered a FIT GATE as a shutter gate for a private residence in a certain location in Tokyo. The columns and beams were manufactured separately, and assembly work was carried out on-site. The dimensions are approximately W6,460×H2,925mm, and the installation time was about 5 hours. After the structure was installed, the construction company completed the shutter work and wall finishing, resulting in completion. [Case Overview] ■ Columns and beams were manufactured separately, and assembly work was conducted on-site. ■ Dimensions are approximately W6,460×H2,925mm, and the installation time was about 5 hours. *For more details, please refer to the related links or feel free to contact us.
Added to bookmarks
Bookmarks listBookmark has been removed
Bookmarks listYou can't add any more bookmarks
By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.
Free membership registrationWe manufactured and delivered the FIT GATE as a garage gate installed under the eaves of a residence in a certain location in Tokyo. Due to space limitations, it was designed as a case-exposed type where the shutter case is visible from the back. After the installation of the structure, finishing work was carried out by the contractor. The same natural stone-like materials used around the gate were applied, resulting in a high-end appearance for the gate. [Case Overview] - Designed as a case-exposed type where the shutter case is visible from the back - Finished to have a luxurious appearance *For more details, please refer to the related links or feel free to contact us.
Added to bookmarks
Bookmarks listBookmark has been removed
Bookmarks listYou can't add any more bookmarks
By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.
Free membership registrationWe would like to introduce a case where we manufactured and delivered a "Shutter Gate (case exposure type)." Considering the narrow width of the delivery route, we manufactured the columns and beams in separate parts, delivered them using a 2-ton unic crane, and performed the connection work on-site. After the installation of the structure, the contractor completed the finishing work, and the gate was finished. 【Case Overview】 ■ Product: FIT GATE ■ Size: Approximately W3,700 × H2,925 mm ■ Installation Time: Approximately 4 hours *For more details, please refer to the related links or feel free to contact us.
Added to bookmarks
Bookmarks listBookmark has been removed
Bookmarks listYou can't add any more bookmarks
By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.
Free membership registrationWe would like to introduce a case where we manufactured and delivered the "Entrance Gate (FIT Welcome Gate)." The columns were treated up to the waterproof substrate, and the semi-finished structure was delivered directly to the site by a crane truck. The ceiling siding and downlight installation were carried out in the factory. After the structure was installed, the finishing work was completed by the construction company, and the gate was finished. 【Case Overview】 ■ Size: Approximately W5,360 × H2,780 mm ■ Roof: GL steel plate with a flat tile finish ■ Ridge: Steel plate cover ■ Installation time: Approximately 3 hours *For more details, please refer to the related links or feel free to contact us.
Added to bookmarks
Bookmarks listBookmark has been removed
Bookmarks listYou can't add any more bookmarks
By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.
Free membership registrationWe would like to introduce a case where we manufactured and delivered an "Arch Gate." During production, embedded posts, delivery boxes, and downlights were installed with supplied materials in the factory. Additionally, the L-shaped roof features a textured finish. After the structure was installed, finishing work was carried out by the contractor, and it was completed. Several types of finishing materials were used for the walls. 【Case Overview】 ■ Size: Approximately W9,500 × H2,740 × D2,500 mm ■ Installation Time: Approximately 2.5 hours *For more details, please refer to the related links or feel free to contact us.
Added to bookmarks
Bookmarks listBookmark has been removed
Bookmarks listYou can't add any more bookmarks
By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.
Free membership registrationWe would like to introduce a case where we manufactured and delivered an "Arch Gate." Due to the contractor's circumstances, the delivery of the structure was prioritized, and the installation work was carried out later. With a Western-style design that utilizes irregularities and curves, after the structure was installed, the contractor performed painting and tile work, resulting in a gate that harmonizes with the fence and house along the approach. 【Case Overview】 ■ Size: Approximately W5,850 × H2,925 mm ■ Installation Time: Approximately 2 hours *For more details, please refer to the related links or feel free to contact us.
Added to bookmarks
Bookmarks listBookmark has been removed
Bookmarks listYou can't add any more bookmarks
By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.
Free membership registrationWe would like to introduce a case where we manufactured and delivered an "Arch Gate." The size is approximately W8,800 × H2,675 mm, and the installation time was about 4 hours. The design takes advantage of the unevenness, and we installed supplied downlights on the ceiling within the factory. After the structure was installed, the finishing of the walls was carried out by the contractor, and it was completed. 【Case Overview】 ■ Product: FIT WALL ■ Size: Approximately W8,800 × H2,675 mm ■ Installation Time: Approximately 4 hours *For more details, please refer to the related links or feel free to contact us.
Added to bookmarks
Bookmarks listBookmark has been removed
Bookmarks listYou can't add any more bookmarks
By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.
Free membership registrationWe would like to introduce a case where we delivered an "arch gate." A Western-style arch gate that utilizes curves and unevenness. The columns and beams were manufactured in sections and connected on-site. The finishing work, such as wall finishing, was done by the contractor, resulting in a gate primarily in white. By aligning the design and finishing with the building, a cohesive entrance area was created. 【Case Overview】 ■ Product: Arch Gate ■ Construction: Manufactured in sections for columns and beams, connected on-site. *For more details, please refer to the related links or feel free to contact us.
Added to bookmarks
Bookmarks listBookmark has been removed
Bookmarks listYou can't add any more bookmarks
By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.
Free membership registrationWe would like to introduce a case where we delivered an "arch gate + gate post." This is a U-shaped arch gate with a wider beam width to serve as a privacy screen for the entrance approach. The beam width and irregularities were designed considering the dimensions and thickness of the tiles used for the finish. Additionally, on a separate day, we installed and delivered a "FIT HIGH-WALL" at the boundary, which was finished in the same style as the gate. [Case Overview] ■ Products - FIT GATE - Gate Post - FIT HIGH-WALL (on a separate day) *For more details, please refer to the related links or feel free to contact us.
Added to bookmarks
Bookmarks listBookmark has been removed
Bookmarks listYou can't add any more bookmarks
By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.
Free membership registrationWe would like to introduce a case where we manufactured the "FIT Welcoming Gate Japanese-style Garage Door." The pillars and roof were manufactured separately and assembled on-site. Although it is a large Japanese-style gate, the installation was completed in one day. Later, the contractor performed finishing work such as wall painting, and it was completed. This original Japanese-style garage gate exudes the atmosphere of a sukiya gate. 【Case Overview】 ■ Product: FIT Welcoming Gate ■ Time Required: 1 Day *For more details, please refer to the related links or feel free to contact us.
Added to bookmarks
Bookmarks listBookmark has been removed
Bookmarks listYou can't add any more bookmarks
By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.
Free membership registrationWe would like to introduce a case where we manufactured and delivered the "FIT Entrance Gate + Shutter Gate." The "FIT Entrance Gate" is shipped with embedded posts installed at our factory. The wooden components are made from carefully selected natural wood from the Hinoki family, crafted by skilled artisans in a custom-made style. The shutter for the "FIT GATE" was installed after the structural setup, arranged by the construction company. 【Case Overview】 ■ Size - FIT Entrance Gate: Approximately W6,200 × H2,490 mm - FIT GATE: Approximately W4,530 × H2,925 mm ■ Installation Time: Approximately 6 hours *For more details, please refer to the related links or feel free to contact us.
Added to bookmarks
Bookmarks listBookmark has been removed
Bookmarks listYou can't add any more bookmarks
By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.
Free membership registrationWe would like to introduce a case where we manufactured and delivered the "FIT Entrance Gate." Electrical wiring for intercoms and lighting was incorporated during manufacturing in the factory, and wooden siding was installed in the factory for the eaves and gables, adjusting the position of the steel base with the installation of the gate in mind. After the structure was installed, finishing work such as wall finishing and installation of fixtures was carried out by the construction company, and it was completed. 【Case Overview】 ■ Product: FIT Entrance Gate ■ Size: Approximately W3,850 × H2,940 mm ■ Installation Time: Approximately 2 hours *For more details, please refer to the related links or feel free to contact us.
Added to bookmarks
Bookmarks listBookmark has been removed
Bookmarks listYou can't add any more bookmarks
By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.
Free membership registrationWe would like to introduce a case where we manufactured and delivered the "FIT Entrance Parking Gate." Due to its large structure, we manufactured the columns, beams, and roof separately and conducted the assembly work on-site. This time, we also received a request for roofing work, and we completed it with a full tile finish. After our work was completed, the contractor applied the wall finishing, and it was completed. 【Case Overview】 ■ Product: FIT Entrance ■ Size: Approximately W6,100 × H3,300 mm (roof dimensions) ■ Installation Time: 3 hours *For more details, please refer to the related links or feel free to contact us.
Added to bookmarks
Bookmarks listBookmark has been removed
Bookmarks listYou can't add any more bookmarks
By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.
Free membership registrationWe would like to introduce a case where we manufactured and delivered the "FIT Welcome Gate combined with a Sukiya Gate." The "FIT Welcome Gate" combined with the Sukiya Gate and the fence. After the installation of the structure, the roofing work was carried out. The design was coordinated with the existing gate and fence, resulting in a new Japanese-style shutter gate with a sense of unity. [Case Overview] ■ Product: FIT Welcome Gate *For more details, please refer to the related links or feel free to contact us.
Added to bookmarks
Bookmarks listBookmark has been removed
Bookmarks listYou can't add any more bookmarks
By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.
Free membership registrationWe would like to introduce a case where we manufactured and delivered the "FIT Entrance Gate." The eaves materials and downlights were installed in our factory using supplied items, and the roof was covered with GL steel sheets in an ayame one-character style. After the structure was installed, the contractor carried out the installation of vertical lattice and wall finishing, resulting in a Japanese modern entrance gate. [Case Overview] ■ Product: FIT Entrance Gate ■ Size: Approximately W6,460 × H2,780mm (roof dimensions) ■ Installation Time: Approximately 4 hours *For more details, please refer to the related links or feel free to contact us.
Added to bookmarks
Bookmarks listBookmark has been removed
Bookmarks listYou can't add any more bookmarks
By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.
Free membership registrationWe would like to introduce a case where we manufactured and delivered the "FIT Entrance Gate for Hotels." The installation was completed in about 3 hours with dimensions of approximately W6,100 × H3,100 mm. After installation, additional work such as roofing, tiling, and lattice installation was carried out by the contractor. Although it is near a busy shopping street, the gate, which evokes a sense of Japanese aesthetics, dramatically changes the atmosphere of the surroundings and attracts attention. 【Case Overview】 ■ Product: FIT Entrance Gate ■ Size: Approximately W6,100 × H3,100 mm ■ Installation Time: Approximately 3 hours *For more details, please refer to the related links or feel free to contact us.
Added to bookmarks
Bookmarks listBookmark has been removed
Bookmarks listYou can't add any more bookmarks
By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.
Free membership registrationWe would like to introduce a case where we manufactured and delivered the "FIT Entrance Gate for Villas." The half-completed gate, which still required finishing work such as tile installation, was delivered using a crane truck. The construction company completed the finishing work, and the gate was finished. The "FIT Entrance Gate" has a more casual atmosphere compared to traditional Sukiya-style gates, creating a luxurious hidden retreat vibe and a sense of exclusivity. 【Case Overview】 ■ Size: Approximately W3,990 × H3,110 × D1,900 mm ■ Roof: Gable roof with flat tile finish ■ Installation Time: Approximately 2 hours *For more details, please refer to the related links or feel free to contact us.
Added to bookmarks
Bookmarks listBookmark has been removed
Bookmarks listYou can't add any more bookmarks
By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.
Free membership registrationWe would like to introduce a case where we manufactured and delivered "FIT WALL + FIT GATE." The shutter gate measures approximately W6,200 × H2,925 mm and is designed to utilize the contours and curves effectively. After installation, the finishing work was carried out by the construction company. It was finished in an ivory color that matches the exterior wall of the house, creating a cohesive and luxurious appearance around the gate. [Case Overview] ■ Product: FIT WALL + FIT GATE ■ Size: Approximately W6,200 × H2,925 mm *For more details, please refer to the related links or feel free to contact us.
Added to bookmarks
Bookmarks listBookmark has been removed
Bookmarks listYou can't add any more bookmarks
By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.
Free membership registrationWe would like to introduce a case where we delivered the "FIT GATE + HIGHWALL." The "FIT HIGH-WALL," which is the same height as the "FIT GATE," does not require a retaining wall due to its seismic design, allowing for secure pathways even in locations adjacent to roads, while also functioning as a privacy screen. Since the embedded post and intercom piping are installed and shipped from the factory, there is no need for detailed work on-site, reducing the burden of on-site labor. 【Case Overview】 ■ Product: FIT GATE, FIT HIGH-WALL ■ Size: Approximately W10,550 × H2,925 mm ■ Installation Time: Approximately 5 hours *For more details, please refer to the related links or feel free to contact us.
Added to bookmarks
Bookmarks listBookmark has been removed
Bookmarks listYou can't add any more bookmarks
By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.
Free membership registrationWe would like to introduce a case where we delivered the "FIT GATE." The dimensions are W14m × D6.1m × H3.5m, with the structure installed, taking 2 days with 3 workers. It features partition walls made of reinforced glass FIT, a garage roof, and a folded plate GL steel sheet covering. There is an existing foundation on the north side. On the backside, there are middle windows and a side entrance sliding door. Please feel free to consult with us when you need our services. 【Case Overview】 ■Dimensions: W14m × D6.1m × H3.5m ■Required Days: 2 days with 3 workers *For more details, please refer to the related links or feel free to contact us.
Added to bookmarks
Bookmarks listBookmark has been removed
Bookmarks listYou can't add any more bookmarks
By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.
Free membership registrationWe would like to introduce a case where we delivered a "shutter gate for three vehicles + a general access gate." Due to the large size of the integrated shutter gate and general access gate, it was manufactured in three separate bodies and assembled on-site. Downlights provided by the client were installed in the ceiling of the general access gate at our factory before shipment. The shutter gate was designed with a rear sloped roof, while the general access gate was designed with a slab roof. 【Case Overview】 ■ Product: Shutter gate for three vehicles + general access gate ■ Size: W13,580 × H2,925 mm ■ Installation time: Approximately 4 hours *For more details, please refer to the related links or feel free to contact us.
Added to bookmarks
Bookmarks listBookmark has been removed
Bookmarks listYou can't add any more bookmarks
By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.
Free membership registrationWe would like to introduce a case where we delivered an "arch gate + access gate." The gate, which has depth, was manufactured by dividing it into columns, beams, and the access gate, and the installation and connection work was carried out on the same day. The beams have a textured finish as decoration. After the main structure was installed, the contractor completed the finishing work, and the gate was completed. 【Case Overview】 ■ Product: Arch Gate + Access Gate ■ Size: Approximately W13,250 × H2,925 × D1,950 mm ■ Installation Time: Approximately 5.5 hours *For more details, please refer to the related links or feel free to contact us.
Added to bookmarks
Bookmarks listBookmark has been removed
Bookmarks listYou can't add any more bookmarks
By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.
Free membership registration