ビュルケルトジャパン List of Products and Services

This is a bellows valve equipped with a PTFE bellows that can be used for filling and other applications. This product also allows for intermediate opening settings! It consists of a spring-return pneumatic actuator, a stainless steel body, and a PTFE bellows, making it ideal for filling applications. When installed properly, the valve performs self-draining, discharging any residual materials inside the valve. The materials and internal shape used in the bellows valve are designed for easy cleaning (CIP and SIP), making it suitable for the food, beverage, pharmaceutical, bio, and semiconductor industries. 【Features】 ○ High corrosion resistance ○ Easy to clean, making it ideal for hygienic applications ○ Long lifespan ○ Compact size －－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－ Please note that our Japanese version data sheet may not completely correspond with our latest data sheet (English version). For detailed specification confirmation or selection assistance, we would greatly appreciate it if you could contact us using the form below. －－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－

• valve

Type8111 is a vibrating level switch for liquids that uses a tuning fork for level detection. It is designed for industrial applications in the process technology field and can be used with various liquids. As a standard application, it is used for overfilling or dry run protection. Depending on the version, it can be used for level monitoring and control in hazardous locations handling flammable liquids, gases, mists, or vapors. 【Features】 ○ Wide range of applications as an overfill or dry run protection system ○ No adjustment setup required ○ Surface treatment of less than 0.8μm makes it ideal for use in the food and beverage industry ○ ATEX certified －－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－ Our Japanese version data sheet may not fully correspond to our latest data sheet (English version). For detailed specification verification or selection, we would greatly appreciate it if you could contact us using the form below. －－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－

• switch

Type8112 is a vibrating level switch for liquids that uses a tuning fork for level detection. It is designed for industrial applications in the process technology field and can be used with various liquids. As a standard application, it is used for overfilling or dry run protection. The Type8112 can extend the tube to accommodate various sensor lengths. A locking fitting is used to extend the tube to the appropriate length. 【Features】 ○ Wide range of use as an overfilling or dry run protection system ○ No adjustment setup required ○ Surface treatment of less than 0.8μm, making it ideal for use in the food and beverage industry ○ ATEX certified －－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－ Our Japanese version data sheet may not fully correspond with our latest data sheet (English version). For detailed specification confirmation or selection, we would appreciate it if you could contact us using the form below. －－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－

• switch

The Type6223 Burkert proportional solenoid valve series is the largest model in terms of diameter. However, while other products can be used for either gas or liquid, the Type6223 is exclusively for liquids. Additionally, if you require a larger diameter than the Type6223, we offer pneumatic control valves. Valve control is performed using the Type8605 proportional solenoid valve controller, which converts analog signals into PWM signals. 【Features】 ○ Continuous control of liquid flow is possible ○ Low hysteresis / high reproducibility ○ High-precision pulse control via PWM signals ○ Pilot-operated solenoid valve design accommodates large diameters －－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－ Our Japanese version data sheet may not fully correspond with our latest data sheet (English version). For detailed specification verification or selection, we would greatly appreciate it if you could contact us using the form below. －－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－

• valve

The direct-acting proportional solenoid valve Type 2836 is a proportional solenoid valve capable of handling large flow rates. The valve operates in a normally closed (NC) state. Valve control is performed using the Type 8605 controller for proportional solenoid valves, which converts analog signals into PWM signals. 【Features】 ○ Proportional solenoid valve for large flow rates ○ Orifice: 3–12mm ○ Direct-acting, NC (normally closed) ○ 0–2.5 MPa ○ Threaded connection 1/2” or 3/4” －－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－ Our Japanese version data sheet may not completely correspond with our latest data sheet (English version). For detailed specification checks or selection inquiries, we would greatly appreciate it if you could contact us using the form below. －－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－

• valve

The direct-acting proportional solenoid valve Type 6024 is a proportional solenoid valve designed for low pressure and high flow applications. The valve operates in a normally closed (NC) position. Valve control is performed using the Type 8605 proportional solenoid valve controller, which converts analog signals into PWM signals. 【Features】 ○ Proportional solenoid valve for low pressure/high flow ○ Orifice: 8–12mm ○ Direct-acting, NC (normally closed) ○ 0–0.07MPa ○ Threaded connection: 1/2” or 3/4” －－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－ Please note that our Japanese version data sheet may not fully correspond with our latest data sheet (English version). For detailed specification verification or selection inquiries, we would greatly appreciate it if you could contact us using the form below. －－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－

• valve

Type0124 is a direct-acting solenoid valve that adopts the flipper structure, which is the original electromagnetic valve operation mechanism by Burkert. The flipper structure performs the opening and closing of the solenoid valve through rotational motion. Since the operation is centered around an axis, it results in mechanically stable operation. Additionally, the fluid and the solenoid valve drive components are isolated by a diaphragm, allowing for a long lifespan without the need for lubrication. 【Features】 ○ Comes standard with a manual operation mechanism ○ Long lifespan, no lubrication required ○ Usable even with highly corrosive chemicals ○ Body materials (resin) include standard options of PP and PVDF －－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－ Our Japanese version data sheet may not fully correspond with our latest data sheet (English version). For detailed specification confirmation or selection assistance, we would greatly appreciate it if you could contact us using the form below. －－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－

• valve

Type0330 is a direct-acting solenoid valve that employs a flipper switching mechanism. Thanks to Burkert's unique design, the coil section is completely separated from the liquid, making it resistant to debris and foreign substances. We offer a variety of operating types, body materials, and seal materials. 【Features】 ○ Flipper-type solenoid valve ○ Equipped with a manual override mechanism ○ The coil section is completely separated from the fluid by a diaphragm, allowing use with liquids, gases, and corrosive fluids ○ Long service life without the need for lubricating oil ○ Specifications for analytical instruments are also available －－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－ Our Japanese version data sheet may not fully correspond with our latest data sheet (English version). For detailed specification verification or selection, we would greatly appreciate it if you could contact us using the form below. －－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－

• valve

Type 8071 is a compact volumetric flow meter designed for measuring high-viscosity fluids such as adhesives, honey, and oil, as well as for batch control when used in conjunction with Type 8025/8619. The design of this product, which accommodates low flow rates, employs an oval gear mechanism. This ensures high accuracy and reliability in flow measurement. Additionally, it provides excellent reproducibility and high measurement accuracy across a wide range of viscosity and flow rates. With low pressure loss and a high rated pressure, it can be used in both gravity piping and pump piping applications. 【Features】 ○ Ideal for flow measurement of high-viscosity fluids ○ Usable for flow monitoring, signal transmission, on/off control, and batch control －－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－ Our Japanese version data sheet may not fully correspond with our latest data sheet (English version). For detailed specification confirmation or selection assistance, we would greatly appreciate it if you could contact us using the form below. －－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－

• Flow Meter

We have added the diaphragm valve model "Type 2031 INOX" to our lineup of the popular stainless steel angle seat valve "Type 2000 INOX." This new product maintains the excellent flow characteristics and zero dead volume developed through our experience with Bürkert's diaphragm products, while achieving a compact full stainless steel design. This product is specifically designed for single-acting (spring return) operation. 【Features】 ○ Compact design ○ All stainless steel (actuator, valve body) ○ Zero dead volume ○ FDA/USP quality certification obtained －－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－ Please note that our Japanese version data sheet may not fully correspond with our latest data sheet (English version). For detailed specification confirmation or selection assistance, we would greatly appreciate it if you could contact us using the form below. －－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－

• valve

A direct-acting solenoid valve that can handle process temperatures from -200 degrees to +180 degrees, thanks to its unique heat-resistant structure! The direct-acting valve Type 2610 is delivered with a normally closed circuit function. The thermal isolation of the coil and housing by means of stainless steel bellows allows for extreme medium temperatures. 【Features】 ○ Medium separation ○ Stainless steel metal bellows system ○ High-quality PTFE sheet seal For more details, please contact us or download the catalog. *This catalog is in English. ----------------- Please note that our Japanese version data sheet may not fully correspond to our latest data sheet (English version). For detailed specification checks or selection inquiries, we would greatly appreciate it if you could contact us using the form below. -----------------

• valve

Type8110 is a vibrating level switch for liquids that uses a tuning fork for level detection. It is designed for industrial applications in the process technology field and can be used with various liquids. As a standard application, it is used for overfill or dry run protection. It features a compact tuning fork (40mm in length) and can be used in containers, tanks, and pipes. 【Features】 ○ Wide range of applications as an overfill or dry run protection system ○ No adjustment required for setup ○ Minimal mounting dimensions For more details, please contact us or download the catalog. －－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－ Please note that our Japanese version data sheet may not fully correspond to our latest data sheet (English version). For detailed specification verification or selection assistance, we would greatly appreciate it if you could contact us using the form below. －－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－

• switch

The Type8045 electromagnetic flow meter (insert type) can be used in conjunction with the TypeS020 fitting for pipe diameters ranging from DN06 to DN400. The main unit is equipped with a screen and buttons. The screen can display instantaneous flow and cumulative flow. Additionally, settings for 4-20mA signals, relay signals, pulse width, and more can be configured using the screen and buttons. 【Features】 ○ Flow measurement principle with no moving parts ○ Capable of displaying both instantaneous flow and cumulative flow ○ Even if no actual flow is present, it can output a corresponding virtual signal (useful during trial runs, etc.) ○ Ideal for CIP flow measurement, FDA certified ○ Alloy C22 electrodes are also available in the lineup For more details, please refer to the catalog or feel free to contact us. －－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－ Please note that our Japanese version data sheet may not fully correspond with our latest data sheet (English version). For detailed specification confirmation or selection, we would greatly appreciate it if you could contact us using the form below. －－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－

• Flow Meter

The Type8221 conductivity sensor is a sensor that measures the conductivity of solutions. This conductivity sensor is designed to be robust and suitable for hygienic applications, making it ideal for use in harsh environments such as food and beverage, pharmaceuticals, biotechnology, and chemical industries. We offer two types of conductivity sensors. 【Features】 ○ 4-electrode / 2-electrode conductivity sensor: Measurement range expanded from 0.05μS/cm to 500mS/cm ○ Designed for hygienic processes with process connections, materials, and surface finishing ○ Optimal for steam sterilization and CIP ○ All wetted parts are FDA (U.S. Food and Drug Administration) approved For more details, please contact us or download the catalog. －－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－ Our Japanese version data sheet may not fully correspond to our latest data sheet (English version). For detailed specification confirmation or selection, we would greatly appreciate it if you could contact us using the form below. －－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－

• Sensors

Type S070 is used in combination with transmitters SE30, SE32, SE35, and SE36, which are equipped with Hall sensors. The transmitters can be easily attached and detached. Type S070 is designed based on the oval rotor principle. This flow measurement has been proven to be a reliable and highly accurate volumetric method. It achieves high reproducibility and high precision across various viscosities and flow rates. 【Features】 ○ DN 15 to DN 100 ○ The transmitter section can be easily attached and detached ○ Display, monitoring, signal transmission, On/Off control, and batch control by Bürkert GmbH transmitters －－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－ Our Japanese version data sheet may not fully correspond to our latest data sheet (English version). For detailed specification confirmation or selection, we would greatly appreciate it if you could contact us using the form below. －－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－

• Sensors

The microwave level transmitter "Type 8136" is a non-contact level transmitter suitable for continuous level measurement. Since it uses microwaves for level detection, it has the characteristic of being less affected by the atmosphere inside the tank (such as steam or negative pressure environments). We offer two connection methods. 【Features】 ○ Non-contact level sensor ○ Capable of measuring levels up to 20m ○ 4-20mA two-wire sensor ○ ATEX certified For more details, please contact us or download the catalog. －－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－ Our Japanese data sheet may not fully correspond with our latest data sheet (English version). For detailed specification confirmation or selection, we would greatly appreciate it if you could contact us using the form below. －－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－

• others

The Bürkert Type 8140 is a non-contact radar level sensor that enables continuous liquid and bulk solid level measurement. It is designed to accommodate a wide range of applications and performs excellently even in harsh environmental conditions and applications that require hygiene standards. It can handle "not only fluids but also particles like powders and pellets," "foam," "obstacle avoidance such as wings (with an irradiation angle of 3°)," and "long distances, high temperatures, and high pressures." 【Features】 ○ Non-contact level sensor ○ Capable of level measurement up to 120m ○ ATEX certified 【Applications】 〇 Chemical industry: Tank management of corrosive liquids 〇 Food and beverage industry: Liquid level measurement in processes that meet hygiene standards 〇 Water treatment facilities: Liquid level monitoring in open channels and reservoirs 〇 Pharmaceutical industry: Processes requiring high-precision liquid level management 〇 General industry: Liquid level measurement in storage tanks for bulk solids and high-pressure vessels

• Sensors

Easily and affordably achieve flow monitoring! The Type 8010 is a flow switch designed to easily and reasonably monitor the maximum/minimum flow of fluids. The Type 8010 consists of the Type S010 sensor fitting and the Type SE10 module, which can be easily installed and removed by simply rotating the Type SE10 by 90 degrees. 【Features】 ○ Easy installation without the need for bypass piping ○ Magnetic measurement method ○ Mechanically adjustable set point For more details, please contact us or download the catalog. －－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－ Please note that our Japanese version data sheet may not fully correspond with our latest data sheet (English version). For detailed specification confirmation or selection, we would greatly appreciate it if you could contact us using the form below. －－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－

• switch

The Type 8316, with a compact design and a height of approximately 30 mm, meets the high demands of our customers and is suitable for various industrial applications, equipped with electromagnetic compatibility (EMC). It features a structure that prevents fluid from leaking externally even if the pressure sensor element is damaged. 【Features】 ○ Measurement principle using a ceramic cell ○ 2-wire 4 to 20 mA output ○ Structure that prevents fluid from leaking externally even if the pressure sensor element is damaged ○ Compact design with a height of approximately 30 mm For more details, please contact us or download the catalog. －－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－ Our Japanese version data sheet may not fully correspond to our latest data sheet (English version). For detailed specification confirmation or selection, we would greatly appreciate it if you could contact us using the form below. －－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－

• Pressure

The Type8619 multifunction transmitter/controller is a microprocessor-based device designed to connect pH/O.R.P., conductivity, and flow meters (pulse signal output type). The Type8619 is ideal for measurement and control, as well as injection processes in applications such as water treatment plants (boilers, cooling towers, or reverse osmosis systems), food factories, and pharmaceutical plants. 【Features】 ○ Simple and intuitive user interface using a large backlit display ○ Expandable slots (up to 6 empty slots) for function selection ○ Further functionality can be expanded with software options ○ Data logging (recording) －－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－ Our Japanese version data sheet may not fully correspond with our latest data sheet (English version). For detailed specification confirmation or selection, we would greatly appreciate it if you could contact us using the form below. －－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－

• Display

The diaphragm control valve "Type 2103" uses stainless steel and resin for the product body and housing. There is no concern about rust due to aging deterioration from baked-on paint like traditional control valves. It is ideal for sanitary environments. 【Features】 ○ Zero span automatic adjustment ○ P.Q'Lin function (linearizes PV value and unit signal for smooth control) ○ Auto-tuning of PID coefficients For more details, please contact us or download the catalog.

• valve

Burkert's batch controller achieves quantitative measurement functionality and open/close support for solenoid valves in a compact body. Automation of quantitative filling can be realized without the need for control panels or complex wiring work. 【Features】 - Achieves quantitative measurement and open/close instructions for valves in a compact size - Wall-mounted controller option available For more details, please contact us or download the catalog.

• controller

【Specifications】 ○ Operating mode: Normally Closed (NC), Normally Open (NO) ○ Diameter: 4A to 100A ○ Connection: Butt welding, Heli-arc ○ Diaphragm: EPDM, PTFE/EPDM ○ Fluid temperature: 0 to 130℃ ○ Ambient temperature: Maximum 50℃ (Standard specification), Maximum 140℃ (High temperature specification) ○ Fluid pressure: 0 to 1.0MPa (depending on diameter / actuator material) *For more details, please contact us or download the catalog.

• valve

【Specifications】 ○ Operating mode: Normally closed (NC), Normally open (NO) ○ Diameter: 4A to 100A ○ Connection: Butt welding, Heli-arc ○ Diaphragm: EPDM, PTFE/EPDM ○ Fluid temperature: 0 to 130℃ ○ Ambient temperature: Maximum 50℃ (standard specification), Maximum 140℃ (high temperature specification) ○ Fluid pressure: 0 to 1.0MPa (depending on diameter / actuator material) *For more details, please contact us or download the catalog.

• valve

【Specifications】 ○ Operating mode: Normally Closed (NC), Normally Open (NO) ○ Diameter: 15A to 100A ○ Connection: Butt welding, Heli-arc ○ Diaphragm: EPDM, PTFE/EPDM ○ Fluid temperature: 0 to 130°C ○ Ambient temperature: Maximum 60°C (standard specification), Maximum 140°C (high temperature specification) ○ Fluid pressure: 0 to 1.0MPa (depending on diameter/actuator material) *For more details, please contact us or download the catalog.

• valve

【Specifications】 ○ Operating mode: Normally Closed (NC), Normally Open (NO) ○ Diameter: 15A to 100A ○ Connection: Butt welding, Heli-arc ○ Diaphragm: EPDM, PTFE/EPDM ○ Fluid temperature: 0 to 130℃ ○ Ambient temperature: Maximum 60℃ (Standard specification), Maximum 140℃ (High temperature specification) ○ Fluid pressure: 0 to 1.0MPa (depending on diameter / actuator material) *For more details, please contact us or download the catalog.

• valve

【Specifications】 ○ Operating Type: Normally Closed (NC), Normally Open (NO) ○ Diameter: 10A to 25A ○ Connection: G thread connection ○ Body Material: Brass, Stainless Steel ○ Seal Material: PTFE/EPDM/FKM ○ Fluid Temperature: -10 to 140℃ (depending on seal material) ○ Fluid Pressure: 0 to 1.0 MPa (depending on diameter and operating type) *For more details, please contact us or download the catalog.

• valve

【Specifications】 ○ Orifice: 1.2 to 2.4mm ○ Connection: M5 screw, Rc1/8 screw connection, manifold connection, etc. ○ Body material: Stainless steel or brass ○ Seat material: FKM ○ Fluid pressure: Maximum 2.1MPa (varies by orifice) ○ Fluid temperature: -10 to 100℃ ○ Voltage: DC24V, AC100V, AC200V, etc. *For more details, please contact us or download the catalog.

• valve

【Specifications】 ○ Orifice: 1.2 to 2.4mm ○ Connection: M5 screw, Rc1/8 screw connection, manifold connection, etc. ○ Body Material: Stainless steel or brass ○ Seat Material: FKM ○ Fluid Pressure: Up to 2.1MPa (varies by orifice) ○ Fluid Temperature: -10 to 100℃ ○ Voltage: DC24V, AC100V, AC200V, etc. *For more details, please contact us or download the catalog.

• valve

【Specifications】 ○Orifice: 2.0 to 6.0mm ○Connection: Rc1/8 to 3/8 screw connection, manifold connection, etc. ○Body Material: Stainless steel or brass ○Seat Material: FKM ○Fluid Pressure: Up to 2.5MPa (varies by orifice) ○Fluid Temperature: -10 to 100 / 180℃ ○Voltage: DC24V, AC100V, AC200V, etc. *For more details, please contact us or download the catalog.

• valve

【Specifications】 ○Orifice: 2.0 to 6.0mm ○Connection: Rc1/8 to 3/8 threaded connection, manifold connection, etc. ○Body Material: Stainless steel or brass ○Seat Material: FKM ○Fluid Pressure: Maximum 2.5MPa (varies by orifice) ○Fluid Temperature: -10 to 100 / 180℃ ○Voltage: DC24V, AC100V, AC200V, etc. *For more details, please contact us or download the catalog.

• valve

【Specifications】 ○Orifice: 1.0 to 6.0mm ○Connection: Rc1/4 to 1/2 screw connection, etc. ○Body Material: Stainless steel or brass (copper alloy) ○Seat Material: FKM or PTFE ○Fluid Pressure: Up to 10MPa (varies by orifice) ○Fluid Temperature: -10 to 100 / 180℃ ○Voltage: DC24V, AC100V, etc. *For more details, please contact us or download the catalog.

• valve

【Specifications】 ○Orifice: 1.0 to 6.0mm ○Connection: Rc1/4 to 1/2 screw connection, etc. ○Body Material: Stainless steel or brass ○Seat Material: FKM or PTFE ○Fluid Pressure: Up to 10MPa (varies by orifice) ○Fluid Temperature: -10 to 100 / 180℃ ○Voltage: DC24V, AC100V, etc. *For more details, please contact us or download the catalog.

• valve

【Specifications】 ○ Operating Type: 2-way valve, Normally Closed (NC), Normally Open (NO) ○ Orifice: 1.0 mm to 12.0 mm ○ Connection: G1/4, G3/8, G1/2 threaded connection ○ Body Material: Stainless Steel, Brass ○ Seat Material: FKM, PTFE, EPDM, etc. ○ Fluid Pressure: Maximum 25 MPa ○ Fluid Temperature: Maximum 140 degrees ○ Voltage: DC24V, AC24V (50Hz), AC230V (50Hz) *For more details, please contact us or download the catalog.

• valve

Burkert Type 6026 Plunger Valve Ideal for high temperature and extreme low temperature applications! The Type 6026 is a direct-acting valve suitable for use in extreme temperature ranges and highly corrosive fluids. The stainless steel bellows separate the coil from the valve body, providing the following features: Wide temperature range: Compatible with fluid temperatures from -200°C to +180°C. Corrosion-resistant design: The use of stainless steel and PTFE ensures excellent durability even under harsh conditions. Energy efficiency: Energy-saving double coil design utilizing "Kick and Drop" technology. Enhanced safety: Models compliant with IP65 protection rating and explosion prevention certifications such as ATEX and IECEx. Main applications: Pharmaceutical manufacturing Chemical processes Food and beverage industry High-purity gas management

• valve

【Specifications】 ○Orifice: 13 to 50mm ○Connection: Rc threaded connection, etc. ○Body Material: Brass ○Seat Material: NBR ○Fluid Pressure: 0.02 to 1.6MPa ○Fluid Temperature: -10 to 80℃ ○Voltage: DC24V, AC100V, AC200V, etc. *For more details, please contact us or download the catalog.

• valve

By adopting our specialty flipper mechanism in the pilot solenoid valve, we have realized a pilot-type solenoid valve that is resistant to debris ingestion. ● It can be used for both liquids and gases. ● It has a proven track record in areas where foreign substances are likely to mix with fluids in piping, such as drainage and cooling water. ● We also offer models that have obtained ATEX certification (as of September 2015). ATEX Certification: PTB03 ATEX 1030X II 2G IEC Ex PTB05.0026X

• valve

Alongside Type5281, this is the Bürkert general-purpose (liquid) pilot-operated solenoid valve, known for its high versatility and long-standing popularity. It is the most affordable model available.

• valve

【Specifications】 ○Orifice: 10 to 40mm ○Connection: Rc threaded connection, etc. ○Body Material: Brass, Stainless Steel ○Seat Material: NBR, etc. ○Fluid Pressure: 0 to 1.0MPa ○Fluid Temperature: -10 to 80℃ ○Voltage: DC24V, AC24V, AC230V, etc. *For more details, please contact us or download the catalog.

• valve

This product is a precision pressure transmitter capable of measuring negative pressure (vacuum), allowing for the detection of the level of contents in a tank by measuring the static pressure within the tank. When used in combination with our unique welding pads, it can be installed in tanks and piping without any dead space.

• Level gauges and level switches

Introducing Bürkert's unique structure new lineup of 3-position valves that achieve flow control solely through the On/Off of instrument air. ○ Achieves full open/close as well as intermediate opening (flow control) on its own! ○ Enables simple flow control without electrical equipment! (The valve's full close/open and intermediate opening are controlled by the On/Off of instrument air) ○ Achieves high durability just like Bürkert's previous On/Off valves! For example, you can utilize it in the following scenarios... ● Temperature control → When you want to enhance control beyond traditional ON/OFF control (intermittent control), improving control is possible by utilizing intermediate opening. ● Filler (diaphragm) → It is possible to suppress the flow rate at the start and end of filling with intermediate opening, while filling in between can be done at maximum flow rate (full open).

• valve

● MFC compatible with CANOpen ● High response speed (fastest within 0.3 seconds, within 0.5 seconds for some models) ● A wide range of lineup supporting flow rates from 10 [ml/min] to 1500 [l/min] ● Protection rating IP65

• Flow Control

●This is a general-purpose electro-pneumatic positioner that complies with CAN/CSA standards. [CSA approval information] Product category code: Class 3221 82-VALVES - Actuators - Certified to US standards Class 3221 02-VALVES - Actuators Considered standards: CAN/CSA-C22 2 No. 139, UL 429 [CSA approval information with ELEMENT, CLASSIC actuator] Approvals: cCSAus, cULus Certificate no. 238179 ●It can be installed not only on our ELEMENT control valves but also on various general-purpose control valves. The one-touch zero adjustment function allows for easy initial adjustment! ●The Type 8793 has a built-in PID function, enabling the construction of a control loop (closed loop) using only the control valve and sensor without the need for additional control equipment (control panel).

• valve

Are you having trouble arranging overseas standard equipment? Bürkert has local subsidiaries in 37 countries around the world and offers a lineup of fluid control equipment that complies with various overseas standards! Are you facing difficulties due to differences in standards by country for export equipment, engineering construction abroad, or modifications of imported equipment? ● Process (piping) connection standards (DIN, ASME BPE, BS4825, SMS) ● UL standards (UL Listed, UL Recognized) ● Overseas explosion-proof standards (ATEX, IECEx) ● Surface treatments (electropolishing, buff polishing), etc. Please feel free to consult with us.

• valve

ATEX/IECEx certified electromagnetic valve for gases and liquids!! Despite its compact size, it is a two-way pilot-operated electromagnetic valve capable of sealing up to 5.0MPa (50bar) (the sealing pressure varies depending on the orifice and fluid). It is ideal for applications requiring differential pressure, especially suitable for high-temperature gases, steam, and compressor relief valve applications. Features: - Wide range of fluid compatibility: Suitable for neutral gases, liquids, and steam (up to 180°C). - Energy-saving design: Energy-efficient double coil with "Kick and Drop" technology. - Flexible options: Offers explosion-proof models (ATEX, IECEx, UL/FM). - Robust durability: Solenoid coil molded with high-quality epoxy resin. - Easy installation: Uses cable plug compliant with IP65 protection rating and DIN EN 175301-803. ● Usable for liquids/gases ● Orifice: 12–25mm ● Fluid temperature: Up to 100°C ● Fluid pressure: Up to 5.0MPa

• Other pumps