ワッティー List of Products and Services

The temperature sensor is a high-performance device that can simultaneously monitor temperatures at four locations with a single transmitter. It is ideal for remote monitoring and can adapt to various environments, including abnormal temperature detection, distribution fields, machine tools, and inside refrigerators. The sensor operates on a hybrid power system of solar and coin batteries, with a transmission interval of once every 10 minutes. It is only available for use within Japan (frequency 928.35MHz, 1mW). EnOcean communication ranges from 30 to 100 meters, and due to its limited transmission range, the risk of information leakage is low. With a low power output of 1mW, it has minimal impact on other devices in factory environments where high-power communication is restricted. It is a suitable sensor for improving Indoor Air Quality (IAQ). Real-time monitoring is possible with a receiver (sold separately) that connects to an HDMI display. *For more details, please download the PDF or feel free to contact us.

• Thermometer

This product is capable of measuring wind direction, wind speed, temperature, humidity, orientation, acceleration, and atmospheric pressure with a single device. 【Features】 Wind Direction: Capable of detecting wind direction in 360° Wind Speed: Detects light winds and calm conditions Temperature: Measures temperatures from 0 to 40°C Humidity: Visualizes discomfort index using temperature and humidity data Atmospheric Pressure: Detects indoor atmospheric pressure Acceleration: Detects the tilt of the installation location Geomagnetism: Detects orientation from the installation location It is a suitable sensor for improving Indoor Air Quality (IAQ). Real-time monitoring is possible with a separately sold receiver for HDMI-connected display. *For more details, please download the PDF or feel free to contact us.

• Wind Speed/Volume Meter

This product is a receiver that can be combined with various IAQ sensors (Indoor Air Quality). (It can connect with up to 10 sensors.) No complicated setup is required as the sensors and receiver are kitted together for delivery! Just connect it to your monitor via HDMI, plug it in, and you can start using it right away. 【Compatible Sensors】 ■ Micro Wind Speed Sensor ■ CO2 Sensor ■ Indoor Radiation Heat Sensor ■ Temperature and Humidity Sensor ■ Particulate Matter Sensor ■ Temperature Sensor *For more details, please feel free to contact us.

• Sensors

This product measures indoor radiant heat in factories, warehouses, sports facilities, nursing homes, and more. It is equipped with a metal black ball indoor radiant heat sensor that can measure heat index, temperature, and humidity. Utilizing EnOcean communication, which can transmit over distances of 30 to 100 meters, it can be used safely. The radio waves do not travel too far, reducing the risk of information leakage. With a low power consumption of 1mW, it has minimal impact on other devices in factory environments where there are restrictions on high-power communication. Real-time monitoring is possible with a receiver for HDMI-connected displays (sold separately). 【Features】 ■ Monitoring frequency: every 10 minutes ■ Power supply: battery-operated, approximately 3 years maintenance-free ■ Temperature: measures temperatures from 0 to +60°C ■ Weight: approximately 200g *For more details, please download the PDF or feel free to contact us.

• Sensors

This product is capable of wireless power supply (energy harvesting) from measurement cables. The integration of clamp structure and wireless communication eliminates the need for wiring and reduces installation costs accordingly. 【Features】 - Operates without batteries - Transmits measurement values wirelessly - Capable of simultaneous measurement from three sensors Real-time monitoring is possible with a receiver for HDMI-connected display (sold separately). *For more details, please download the PDF or feel free to contact us.

• Sensors

We would like to introduce our "Laser Powder Level Sensor." It adopts Class 1 from the IEC laser classification, ensuring safety. Level detection is achieved with a 4-20mA analog output. It allows for non-contact measurement of powder and liquid levels. Please feel free to contact us if you have any inquiries. 【Features】 ■ Non-contact detection of powder remaining ■ Measurement range: 25 to 1,400mm ■ 4-20mA analog output ■ Class 1 laser product (940nm) *For more details, please refer to the PDF document or feel free to contact us.

• Sensors
• Other FA equipment

The "Hi-Watty Light" provided by Watty is a compact heater made of aluminum nitride, which has a thermal conductivity close to that of pure aluminum. Thanks to the high thermal conductivity of the material and a unique heater pattern design that prevents air from remaining inside the heater, it achieves high heat output and uniform temperature characteristics despite its small size. It is highly resistant to impact and can be used for heating applications involving containers, metals, gases, and more. We offer 7 sizes ranging from 5mm to 50mm, with 15 variations available, all at low cost and with short delivery times. ★ We also provide custom products with even higher temperature characteristics and compact temperature control units. For more details, please refer to the materials or feel free to contact us. 【Features】 ■ Supports rapid heating and cooling ■ Thermal conductivity close to aluminum ■ Low thermal expansion rate ■ High electrical insulation ■ Excellent corrosion resistance * For standard products, we can accommodate short delivery times. We also accept requests for prototypes and custom designs. * For more details, please refer to the PDF materials or feel free to contact us. ▼ Contact Information TEL: Sagamihara Office 042-704-5352 MAIL: info@watty.co.jp

• Ceramic Heater

At Watty, we offer a "contract film deposition service" using ALD equipment. We can deposit various oxide and nitride films such as Al2O3, TiO2, ZrO2, HfO2, RuO2, SiO2, and TiN. The sizes we can accommodate range from small chips to pipes and films, up to 300mm. We respond to various needs, including assistance with film deposition on various samples using your desired precursors, live demonstrations with customer attendance, and evaluations based on your preferred recipes and parameters. ★ If you would like to know more about our services or are considering making a request, please feel free to contact us using the "Contact Us" button below. 【Features】 ■ Capable of depositing various oxide and nitride films (Al2O3, TiO2, ZrO2, HfO2, RuO2, SiO2, TiN, etc.) ■ Can accommodate sizes from small chips to pipes and films, up to 300mm ■ Our technicians provide support for recipe creation and parameter settings ■ We can also accommodate the use of your own precursors ■ Regular small-lot production is possible *For more details, please refer to the PDF document or feel free to contact us.

• Other surface treatment equipment

The "Heat Exchanger WEX SS" provided by Watty is a lightweight 280g ultra-compact gas heater that is smaller than the size of a palm. It supports low flow rates of 1-5L/min and can reach temperatures of 250°C. It comes standard with a K thermocouple, thermostat, and insulation material for the exterior. 【Features】 ■ Lightweight at 280g and ultra-compact gas heater smaller than palm size ■ Supports low flow rates of 1-5L/min and temperatures up to 250°C ■ Standard equipment includes K thermocouple, thermostat, and insulation material for the exterior *For more details, please refer to the PDF document or feel free to contact us. ▼ Contact Information TEL: Sagamihara Office 042-704-5352 MAIL: info@watty.co.jp

• Other heaters

The "Aluminum Nitride Ceramic Heater (Hi watty)" provided by Watty can be used in semiconductor manufacturing equipment. It uses a high-performance heater made in Japan, capable of heating from room temperature to 600°C in just 5 seconds. The available dimensions are 130×130mm or less than Φ130mm, with customization as a standard option. 【Features】 ■ 600°C in 5 seconds with a high-performance heater made in Japan ■ Fast heating and cooling ■ Thermal conductivity close to that of aluminum metal ■ Low thermal expansion ■ High electrical insulation ■ Excellent corrosion resistance *For more details, please refer to the PDF document or feel free to contact us. ▼ Contact Information TEL: Sagamihara Office 042-704-5352 MAIL: info@watty.co.jp

• Aluminum heater
• Ceramic Heater

The "Heat Exchanger (WEX) SS" provided by Watty is an ultra-compact gas heating heater that is smaller than the size of a palm. It excels in low flow applications (1-5 L/min) and can operate at a temperature of up to 250°C. It comes standard with a K thermocouple, thermostat, and insulation material for the exterior. A version compliant with UL499, the "Heat Exchanger (WEX) UL," is also available. ★ For standard products, we can accommodate short delivery times. We also accept requests for prototypes and custom designs. 【Specifications of the "Heat Exchanger (WEX) SS"】 Dimensions: 70mm x 32mm x 42mm (excluding insulation and piping) Operating temperature: 250°C Rated flow: 1-5 L/min Rated capacity: 140W (AC100V or 200V) Weight: 280g *For more details, please refer to the PDF document or feel free to contact us. ▼ Contact Information TEL: Sagamihara Office 042-704-5352 MAIL: info@watty.co.jp

• Other heaters

The "WEX Series" provided by Watty is a high-efficiency gas heater made of all stainless steel (SUS316L) for gas heating, with joints and piping in the gas connection area. It offers specifications suitable for different sizes, with a minimum flow rate of 10L/min to a maximum flow rate of 100L/min, and can handle a maximum operating temperature of 300°C. It is equipped with standard features for temperature control and overheating prevention, and the wiring is also simple. The standard joint is UJR 1/4 Female size, compatible with inlet/outlet sizes ranging from 1/4 to 1/2. 【Features】 ■ Clean structure using only WEP pipes ■ Compact, lightweight, and high efficiency ■ Standard equipped with thermocouples and thermostats ■ IN/OUT joints are interchangeable ■ Available in four sizes: SS / S / M / L *For more details, please refer to the PDF document or feel free to contact us. ▼ Contact Information TEL: Sagamihara Office 042-704-5352 MAIL: info@watty.co.jp

• Other semiconductor manufacturing equipment
• Heating device

The "Heat Exchanger WEX UL" provided by Watty is a high-efficiency heater for gas heating, designed for piping, containers, and gases. It supports a flow rate of 10L/min at 200℃. It comes standard with a K thermocouple and a thermostat. 【Features】 ■ UL499 compliant product File No. E478998 ■ Supports a flow rate of 10L/min at 200℃ ■ Standard equipment includes K thermocouple and thermostat *For more details, please refer to the PDF materials or feel free to contact us. ▼ Contact Information TEL: Sagamihara Office 042-704-5352 MAIL: info@watty.co.jp

• Other heaters

Equipment for experiments and research and development provided by Watty. We offer devices ranging from 2-inch to 8-inch models to meet user needs. Additionally, we provide various optional ancillary equipment to reduce the burden of equipment installation for our customers. We can accommodate customization requests for all aspects, including safety specifications, the number of precursors, precursor introduction methods, and exhaust systems. *For more details, please refer to the PDF materials or feel free to contact us. ▼ Contact Information TEL: Sagamihara Office 042-704-5352 MAIL: info@watty.co.jp

• Processing Contract
• Other surface treatment equipment

The polyimide heaters from the Procure series offered by Watty are ultra-thin products with a thickness of 200μm. With improvements in shape, dimensions, and arbitrary heating efficiency, it is possible to design temperature distributions that achieve reduced power consumption. We can manufacture suitable heaters tailored to your specifications in the shortest time, starting from just one unit. 【Specifications (partial)】 ■ Heat resistance temperature: 200℃ ■ Allowable watt density: 3.0W/cm2 ■ Possible dimensions: 460mm×1000mm ■ Thickness: 0.2mm ■ Insulation resistance: 100MΩ or more at DC500V megger *For more details, please refer to the PDF document or feel free to contact us. ▼ Contact Information TEL: Sagamihara Office 042-704-5352 MAIL: info@watty.co.jp

• Other heaters

The "Silicone Rubber Heater" provided by Watty is composed of a thin silicone rubber sheet, which offers excellent flexibility and can be closely adhered to the object being heated. The heater terminals can withstand a pulling force of 10 kg due to their special structure. We can accommodate a short delivery time of two weeks after receiving an order, and we can manufacture from a single piece. 【Features】 ■ Can be closely adhered to the object being heated ■ Heater terminals can withstand a pulling force of 10 kg ■ Short delivery time of two weeks after receiving an order ■ Can be manufactured from a single piece *For more details, please refer to the PDF materials or feel free to contact us. ▼ Contact Information TEL: Sagamihara Office 042-704-5352 MAIL: info@watty.co.jp

• Silicon Heater
• Other heaters

The mica heater from Watty's Procure series has excellent insulation properties. It can withstand high temperatures of up to 600°C among planar heating elements. We can manufacture suitable heaters tailored to your specifications in the shortest time possible, starting from just one piece. 【Specifications (partial)】 ■ Heat resistance temperature: 600°C ■ Allowable watt density: 17.0W/cm² ■ Possible manufacturing dimensions: 1000mm × 1100mm ■ Thickness: 0.9mm ■ Insulation resistance: Over 100MΩ at DC500V megger *For more details, please refer to the PDF document or feel free to contact us. ▼ Contact information TEL: Sagamihara Office 042-704-5352 MAIL: info@watty.co.jp

• Other heaters

The "Mantle Heater" provided by Watty can be used for heating pipes and containers. We also accept the design and manufacturing of insulation and heat-retaining materials that do not use heating elements, and we have multiple cross-materials available, allowing for production according to your desired specifications. (Please consult us if you require temperatures above 400°C.) Additionally, we offer options for the installation of temperature control elements such as thermostats, fuses for overheating prevention, thermocouples, and Pt sensors. 【Features】 ■ Maximum operating temperature of 400°C (consult separately for high-temperature applications) ■ Ensures good adhesion with the heated object ■ High-density implementation of heating wires improves temperature uniformity ■ Suitable for use in clean rooms ■ Capable of manufacturing heaters with three-dimensional shapes ■ Contributes to energy savings with integrated heaters and insulation materials ■ Detachable structure designed with maintenance in mind *For more details, please refer to the PDF materials or feel free to contact us. ▼ Contact Information TEL: Sagamihara Office 042-704-5352 MAIL: info@watty.co.jp

• Other heaters
• Other semiconductor manufacturing equipment

At Watty, we offer the 'Easy Trace Heater,' a simple design that allows for smooth installation without the hassle. The US fiber heating elements are arranged in a narrow pitch, providing excellent temperature distribution performance. Additionally, parts such as joints and valves, which were previously difficult to heat evenly with tape heaters, can now be uniformly heated by adding localized components. Installation of thermocouples, Pt sensors, thermostats, etc., is available as an option. 【Features】 ■ Ease of Installation - A simple design that allows for smooth installation without hassle. ■ Uniformity - Exhibits excellent temperature distribution performance. - Joints and valves can also be uniformly heated by adding localized components. ■ Insulation - The built-in E-glass insulation material in the heater provides insulation effects. *For more details, please refer to the PDF document or feel free to contact us. ▼ Contact Information TEL: Sagamihara Office 042-704-5352 MAIL: info@watty.co.jp

• Other heaters

Introducing Watty's "High-Precision Hot Plate for Vacuum Use." The aluminum plate can withstand temperatures up to 400°C and precisely controls the temperature distribution across its surface. We also accept orders for the fabrication of welded piping and special gas welding piping, accommodating short lead times and small production runs. 【Features】 ■ High-precision control of temperature distribution across the surface ■ Consultation available for shapes, sizes, and more ■ MAX 400°C compatible (aluminum plate) ■ Extensive background data supporting welding of various piping materials and components *For more details, please refer to the PDF document or feel free to contact us. ▼ Contact Information TEL: Sagamihara Office 042-704-5352 MAIL: info@watty.co.jp

• Other heaters

The "watty series" provided by Watty is a robust cartridge heater designed to withstand mechanical vibrations and shocks. We offer a variety of sizes in millimeters and inches, L-shaped types, and types with thermocouples. The standard types, as well as those with flanges (screw-in and plate), are also available. Additionally, we can accommodate special shapes, segmented heating elements, specified heating ratios, and the production of vacuum-compatible cartridge heaters. 【Features】 ■ Heaters with a rich lineup, including special shapes and segmented heating elements ■ Long-lasting and high-efficiency heaters ■ Usable at high temperatures (maximum heater surface temperature of 760°C) ■ Robust structure that withstands mechanical vibrations and shocks ■ UL and CE compliance available ■ Minimum diameter of φ3.1mm can be produced *For more details, please refer to the PDF materials or feel free to contact us. ▼ Contact Information TEL: Sagamihara Office 042-704-5352 MAIL: info@watty.co.jp

• Other heaters
• Heating device

Introducing Watty's "High-Precision Hot Plate for Atmospheric Pressure." It is suitable for heating metals, liquids, and gases, including piping and containers. Compared to integrated heaters, it is lightweight and has low power consumption, achieving high-precision distribution even for FPD G8 sizes due to its split design. 【Features】 ■ Lightweight and low power consumption compared to integrated heaters ■ High-precision distribution for FPD G8 sizes achieved through split design ■ Supports up to 400℃ *For more details, please refer to the PDF document or feel free to contact us. ▼ Contact Information TEL: Sagamihara Office 042-704-5352 MAIL: info@watty.co.jp

• Other heaters

We would like to introduce the "Captron capacitive liquid level sensor/laser powder level sensor" that we handle. 【Capacitive Liquid Level Sensor Features】 ■ Custom processing available with an analog output measuring range of 200mm to 3000mm ■ Excellent at detecting water, medium viscosity liquids, and liquids containing foreign substances ■ Compatible with liquid level detection of epoxy resin main agents and hardeners 【Laser Powder Level Sensor Features】 ■ Measurement range of 25mm to 1400mm using Time of Flight method ■ Suitable for detecting powders (sand, snow, solder, pellets, etc.) ■ Capable of non-contact detection Captron's sensors are provided with quality assurance by our company, the liquid level sensor manufacturer, which serves as the exclusive distributor in Japan, so you can rest assured. *For more details, please refer to the PDF document or feel free to contact us.

• Sensors

At Watty, we also handle special thermocouples that are not compliant with JIS standards. We can provide custom-made solutions tailored to your specifications, including contact methods that can withstand temperatures up to 2500°C, types of thermocouples, resistance values of platinum resistance thermometers, sheath shapes, and wiring methods.

• Other temperature and humidity measuring instruments

Since it is an analog sensor, it is possible to detect the remaining amount linearly.

• Liquid level control/level switch

We have prepared a standard product made of stainless steel, which is strong in harsh environments, in a vertical mounting type for general use. We offer six types: HL-M-000D/E/F/G/H/J. Each type differs in length and the operation method for rising ON/falling ON. Common Specifications: Rated voltage, open/close current, and open/close capacity: Max AC200V/DC200V Max 50VA/50W Mounting shape: M12×P1.25 Operating temperature range: -40℃ to 120℃ Material: Stem/SUS304, Float/SUS304 *For more details, please download the PDF or contact us.

• Level gauges and level switches

We offer a wide variety of products, from general-purpose small stainless steel types to horizontal mounting types. We will propose products that meet your specific requirements. *For more details, please refer to the PDF document or feel free to contact us. ▼Contact Information TEL: Hamamatsu Office 053-420-1281 MAIL: info@watty.co.jp

• Level gauges and level switches

This is a stainless steel float switch with ultra-wide hysteresis. It is ideal for use in harsh environments such as high pressure and ultraviolet light. The HL-M-R type can easily control full and dry conditions with just one float switch under light load. 【Specifications】 Type: Reed switch type Operating voltage: DC5V/12V DC24V Open/close current: Max 0.5A 0.3A Current consumption: Max 40mA Liquid specific gravity: Min 0.8 Standard liquid: 1.0 Operating temperature range: -10℃ to 120℃ Material: Stem/SUS304 Float/SUS304 Control points: 2-point self-holding Mounting height L: Max 900mm Cable specifications: UL3266 AWG24 *For more details, please download the PDF or contact us.

• Level gauges and level switches

A float switch has been installed in a tank made of PE resin. It can issue alarms for full and empty tank conditions. The tank is available in three sizes: 5L, 10L, and 20L. You can choose from two types of float switches: made of PP resin or SUS304. By using the optional HSU-1002T, liquid level control and monitoring can be easily achieved. *For more details, please refer to the PDF document or feel free to contact us. ▼ Contact Information TEL: Hamamatsu Office 053-420-1281 MAIL: info@watty.co.jp

• Level gauges and level switches
• Liquid level control/level switch

We offer a lineup of various types of flood sensors and can propose sensors that meet our customers' requirements. We can also accommodate monitoring methods using IoT without power supply in locations where it is difficult to provide power.

• Analytical Equipment and Devices

This is a horizontally mounted float switch made of polypropylene. The biggest advantage of horizontal mounting is that you can drill a hole at the desired height for liquid level control and install the sensor. Additionally, its compact size allows for greater flexibility in installation locations. 【Specifications】 Type: Reed switch type Operating voltage: Max AC100V/DC100V Switching capacity / Switching current: Max 10VA/10W and Max 0.5A Specific gravity of liquid used: 0.8 Standard liquid: 1.0 Operating temperature range: -10℃ to 80℃ Material: Stem PP / Float PP Operating direction: ON with rising liquid level Cable specifications: UL3266 AWG24 *For more details, please download the PDF or contact us.

• Liquid level control/level switch

This is a proximity switch utilizing a reed switch. We have various products available. Please check the details below for specifications. We can accommodate custom orders in desired shapes, not just standard specifications. For details such as MOQ, please contact us.

• Level gauges and level switches

The float is made of PP/NBR and the stem is SUS304. We have a lineup for maximum operating voltage of 200V with level rise ON and level fall ON. *For more details, please refer to the PDF document or feel free to contact us. ▼Contact Information TEL: Hamamatsu Office 053-420-1281 MAIL: info@watty.co.jp

• Liquid level control/level switch
• Instrumentation and Control Systems
• Level gauges and level switches

This is a polypropylene float switch. It is ideal for detecting saltwater, sodium hypochlorite aqueous solutions, and more. To ensure that the magnet in the float section is not exposed, we perform a two-shot molding process, achieving a contact part made of 100% polypropylene resin. We can design and manufacture it to a length of 500mm with a maximum of two-point control output according to customer requirements. *For more details, please refer to the PDF document or feel free to contact us. ▼ Contact Information TEL: Hamamatsu Office 053-420-1281 MAIL: info@watty.co.jp

• Liquid level control/level switch

This is a stainless steel float switch. It is ideal for use in harsh environments such as high pressure and ultraviolet light. The length is 1000mm, and we can design and manufacture up to four control outputs according to your requirements. You can choose the installation method from G1/8 and R1. We also offer the HL-5-000 series with a resin float type. 【Specifications】 Type: Reed switch Operating voltage: MAX AC200V/DC200V Switching capacity: Opening and closing current Max 50VA/50W and 0.5A Specific gravity of liquid used: Min 0.8 Standard liquid: 1 Operating temperature range: -40℃ to 120℃ Material: Stem: SUS304 / Float: SUS304 Number of control points: Up to 4 points Cable specifications: UL3266 AWG22~28

• Level gauges and level switches

A bridge device that receives data from EnOcean devices, converts it to LoRaWAN, and aggregates the backhaul line. This device is used to receive data from EnOcean devices, convert it to LoRaWAN, and transmit it. It can be used in cases where the communication distance of EnOcean is insufficient, or when there are desired products not available in LoRaWAN but available in EnOcean.

• Other network tools

This is a float switch made of all polypropylene with a flange height of 27mm, and it is one of the smallest and lightest types available in Japan. We offer two types: one for ON when the liquid level rises and another for ON when it falls. It is ideal for controlling the liquid level at the bottom or top of a storage tank. *For more details, please refer to the PDF document or feel free to contact us. ▼ Contact Information TEL: Hamamatsu Office 053-420-1281 MAIL: info@watty.co.jp

• Level gauges and level switches
• Liquid level control/level switch

This is a continuous liquid level sensor with a built-in temperature sensor. By adopting a magnetoresistive element and using a ladder output method, we have achieved cost reduction. It is optimal for applications requiring liquid level control, detection of freezing, and temperature regulation of liquids. It supports longer measurement lengths than the HL-AP, with types available in 600 and 900 mm. By connecting to the dedicated display unit HL-AM of the HL-A/AP series, it is possible to display the liquid level position and liquid temperature. *For more details, please refer to the PDF materials or feel free to contact us. ▼ Contact Information TEL: Hamamatsu Office 053-420-1281 MAIL: info@watty.co.jp

• Liquid level control/level switch